# Copyright: Public domain. # Filename: PHASE_TABLE_MAINTENANCE.agc # Purpose: Part of the source code for Colossus 2A, AKA Comanche 055. # It is part of the source code for the Command Module's (CM) # Apollo Guidance Computer (AGC), for Apollo 11. # Assembler: yaYUL # Contact: Ron Burkey . # Website: www.ibiblio.org/apollo. # Pages: 1404-1413 # Mod history: 2009-05-10 SN (Sergio Navarro). Started adapting # from the Colossus249/ file of the same # name, using Comanche055 page images. # # This source code has been transcribed or otherwise adapted from digitized # images of a hardcopy from the MIT Museum. The digitization was performed # by Paul Fjeld, and arranged for by Deborah Douglas of the Museum. Many # thanks to both. The images (with suitable reduction in storage size and # consequent reduction in image quality as well) are available online at # www.ibiblio.org/apollo. If for some reason you find that the images are # illegible, contact me at info@sandroid.org about getting access to the # (much) higher-quality images which Paul actually created. # # Notations on the hardcopy document read, in part: # # Assemble revision 055 of AGC program Comanche by NASA # 2021113-051. 10:28 APR. 1, 1969 # # This AGC program shall also be referred to as # Colossus 2A # Page 1404 # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY. COUNT 02/PHASE BLOCK 02 SETLOC FFTAG1 BANK NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED. CAF 0 INCR Q NEWMODEA TS MODREG # ENTRY FOR MODE IN A. MMDSPLAY CAF +3 # DISPLAY MAJOR MODE. PREBJUMP LXCH BBANK # PUTS BBANK IN L TCF BANKJUMP # PUTS Q INTO A CADR SETUPDSP # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2. CHECKMM INDEX Q CS 0 AD MODREG EXTEND BZF Q+2 TCF Q+1 # NO MATCH TCQ = Q+2 +1 BANK 14 SETLOC PHASETAB BANK COUNT 10/PHASE SETUPDSP INHINT DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO TC NOVAC # NEWMODEX EBANK= MODREG 2CADR DSPMMJOB DXCH RUPTREG1 RELINT DXCH Z # RETURN DSPMMJOB EQUALS DSPMMJB BLOCK 02 # Page 1405 SETLOC FFTAG1 BANK # Page 1406 # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION, # TC PHASCHNG # OCT XXXXX # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE, # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR # LONGCALL TO BE RESTARTED. # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART. # # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS # TL0 00P PPP PPP GGG # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G'S STAND FOR THE GROUP, OCTAL 1-7, THE P'S FOR THE PHASE, # OCTAL 0 - 127. 0'S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME, # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMILARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE # IT IS SET TO 0. SOME EXAMPLES, # TC PHASCHNG # THIS WILL CAUSE GROUP 3 TO BE SET TO 0, # OCT 00003 # MAKING GROUP 3 INACTIVE # # TC PHASCHNG # IF A RESTART OCCURS THIS WOULD CAUSE # OCT 00012 # GROUP 2 TO RESTART THE LAST DISPLAY # # TC PHASCHNG # THIS SETS THE TBASE OF GROUP 4 AND IN # OCT 40064 # CASE OF A RESTART WOULD START UP THE TWO # # THINGS LOCATED IN THE DOUBLE 4.6 RESTART # # LOCATION. # # TC PHASCHNG # THIS SETS LONGBASE AND UPON A RESTART # OCT 20135 # CAUSES 5.13 TO BE RESTARTED (SINCE # # LONGBASE WAS SET THIS SINGLE ENTRY # # SHOULD BE A LONGCALL) # # TC PHASCHNG # SINCE BOTH TBASE4 AND LONGBASE ARE SET, # OCT 60124 # 4.12 SHOULD CONTAIN BOTH A TASK AND A # # LONGCALL TO BE RESTARTED # # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABLE LOCATION. THE BITS ARE AS FOLLOWS, # TL0 1AD XXX CJW GGG # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G'S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF # THESE THREE BITS MAY BE SET. X'S ARE IGNORED, 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE, # Page 1407 # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION., IF THIS IS TO BE INDIRECT, THAT # IS, THE NAME OF A LOCATION CONTAINING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATION. EXAMPLES, # AD TC PHASCHNG # THIS WOULD CAUSE LOCATION AD +3 TO BE # AD+1 OCT 05023 # RESTARTED BY GROUP THREE WITH A PRIORITY # AD+2 OCT 23000 # OF 23. NOTE UPON RETURNING IT WOULD # AD+3 # ALSO GO TO AD+3 # # AD TC PHASCHNG # GROUP 1 WOULD CAUSE CALLCALL TO BE # AD+1 OCT 27441 # BE STARTED AS A LONGCALL FROM THE TIME # AD+2 -GENADR DELTIME # STORED IN LONGBASE (LONGBASE WAS SET) BY # AD+3 2CADR CALLCALL # A DELTATIME STORED IN DELTIME. THE # AD+4 # BBCON OF THE 2CADR SHOULD CONTAIN THE E # AD+5 # BANK OF DELTIME. PHASCHNG RETURNS TO # # LOCATION AD+5 # # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE. # # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOW, # TL1 DAP PPP PPP GGG # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G'S STAND FOR THE GROUP, OCTAL 1 - 7, THE P'S FOR THE FIXED # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN. # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES, # AD TC PHASCHNG # TBASE IS SET AND A RESTART CAUSE GROUP 3 # AD+1 OCT 56043 # TO START THE JOB AJOBAJOB WITH PRIORITY # AD+2 OCT 31000 # 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN # AD+3 2CADR AJOBAJOB # ASSUME IT IS A TASK SINCE WE SET TBASE3) # AD+4 # UPON RETURN FROM PHASCHNG CONTROL WOULD # AD+5 # GO TO AD+5 # # AD TC PHASCHNG # UPON A RESTART THE LAST DISPLAY WOULD BE # AD+1 OCT 10015 # RESTARTED AND A JOB WITH THE PREVIOUSLY # AD+2 # STORED PRIORITY WOULD BE BEGUN AT AD+2 # # BY MEANS OF GROUP 5 # Page 1408 # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO -- NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC. # SUMMARY OF BITS: # TYPE A TL0 00P PPP PPP GGG # TYPE B TL1 DAP PPP PPP GGG # TYPE C TL0 1AD XXX CJW GGG # Page 1409 # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG # CALLS ARE MADE IN THE FOLLOWING MANNER, # TC 2PHSCHNG # OCT XXXXX # OCT YYYYY # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE # DIFFERENCE --- NOTE: IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP, # AD TC 2PHACHNG # SET TBASE3 AND IF A RESTART OCCURS START # AD+1 OCT 40083 # THE TWO ENTRIES IN 3.8 TABLE LOCATION # AD+2 OCT 05025 # THIS IS OF TYPE C, SET THE JOB TO BE # AD+3 OCT 18000 # TO BE LOCATION AD+4, WITH A PRIORITY 18, # AD+4 # FOR GROUP 5 PHASE INFORMATION. COUNT 02/PHASE 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE NDX Q CA 0 INCR Q TS TEMPP2 MASK OCT7 DOUBLE TS TEMPG2 CA TEMPP2 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST. EXTEND MP BIT12 XCH TEMPP2 MASK BIT15 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT TCF PHASCHNG +3 PHASCHNG INHINT CA ONE # INDICATES CAME FROM A PHASCHNG ENTRY TS TEMPSW2 NDX Q CA 0 INCR Q TS TEMPSW # Page 1410 EXTEND DCA ADRPCHN2 # OFF TO SWITCHED BANK DTCB EBANK= LST1 ADRPCHN2 2CADR PHSCHNG2 ONEORTWO LXCH TEMPBBCN LXCH BBANK LXCH TEMPBBCN MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS CCS A TCF CHECKB # IT IS OF TYPE `B'. CA TEMPP MASK BIT7 CCS A # SHALL WE USE THE OLD PRIORITY TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T) OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T) CA PHSPRDT1 -2 TS TEMPPR CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN MASK BIT8 CCS A TCF GETNEWNM CA Q TS TEMPNM CA BB EXTEND # PICK UP USER'S SUPERBANK ROR SUPERBNK TS TEMPBB TOCON2 CA CON2ADR # BACK TO SWITCHED BANK LXCH TEMPBBCN DTCB CON2ADR GENADR CON2 GETPRIO NDX Q # DON'T CARE IF DIRECT OR INDIRECT CA 0 # LEAVE THAT DECISION TO RESTARTS INCR Q # OBTAIN RETURN ADDRESS TCF CON1 -1 GETNEWNM EXTEND # Page 1411 INDEX Q DCA 0 DXCH TEMPNM CA TWO ADS Q # OBTAIN RETURN ADDRESS TCF TOCON2 OCT14000 EQUALS PRIO14 TEMPG EQUALS ITEMP1 TEMPP EQUALS ITEMP2 TEMPNM EQUALS ITEMP3 TEMPBB EQUALS ITEMP4 TEMPSW EQUALS ITEMP5 TEMPSW2 EQUALS ITEMP6 TEMPPR EQUALS RUPTREG1 TEMPG2 EQUALS RUPTREG2 TEMPP2 EQUALS RUPTREG3 TEMPBBCN EQUALS RUPTREG4 BB EQUALS BBANK BANK 14 SETLOC PHASETAB BANK EBANK= PHSNAME1 COUNT 10/PHASE PHSCHNG2 LXCH TEMPBBCN CA TEMPSW MASK OCT7 DOUBLE TS TEMPG CA TEMPSW MASK OCT17770 EXTEND MP BIT12 TS TEMPP CA TEMPSW MASK OCT60000 XCH TEMPSW MASK OCT14000 CCS A TCF ONEORTWO # Page 1412 CA TEMPP # START STORING THE PHASE INFORMATION NDX TEMPG TS PHASE1 -2 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG TCF BELOW2 # IT'S A PHASCHNG TCF +1 # IT'S A 2PHSCHNG CS TEMPP2 LXCH TEMPP2 NDX TEMPG2 DXCH -PHASE1 -2 CCS TEMPSW2 NOOP # CAN'T GET HERE TCF BELOW2 CS TIME1 NDX TEMPG2 TS TBASE1 -2 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE TCF BELOW3 # SET LONGBASE ONLY TCF BELOW4 # SET NEITHER CS TIME1 # SET TBASE TO BEGIN WITH NDX TEMPG TS TBASE1 -2 CA TEMPSW # SHALL WE NOW SET LONGBASE AD BIT14COM CCS A NOOP # ***** CAN'T GET HERE ***** BIT14COM OCT 17777 # ***** CAN'T GET HERE ***** TCF BELOW4 # NO WE NEED ONLY SET TBASE BELOW3 EXTEND # SET LONGBASE DCA TIME2 DXCH LONGBASE BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE NDX TEMPG TS -PHASE1 -2 CA Q LXCH TEMPBBCN RELINT DTCB CON2 LXCH TEMPBBCN # Page 1413 CA TEMPP NDX TEMPG TS PHASE1 -2 CA TEMPPR NDX TEMPG TS PHSPRDT1 -2 EXTEND DCA TEMPNM NDX TEMPG DXCH PHSNAME1 -2 TCF BELOW1 BLOCK 02 SETLOC FFTAG1 BANK COUNT 02/PHASE CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY TCF GETPRIO # IT IS, SO GET NEW PRIORITY TCF OLDPRIO # IT ISN'T, USE THE OLD PRIORITY.