Apollo-11/Luminary099/P20-P25.agc

# Copyright:	Public domain.
# Filename:	P20-P25.agc
# Purpose: 	Part of the source code for Luminary 1A build 099.
#		It is part of the source code for the Lunar Module's (LM)
#		Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler:	yaYUL
# Contact:	Onno Hommes <ohommes@cmu.edu>.
# Website:	www.ibiblio.org/apollo.
# Pages:	0492-0613
# Mod history:	2009-05-26 OH	Transcribed from page images.
#		2009-06-05 RSB	Corrected a typos.
#		2009-06-06 RSB	Added a missing instruction, and a block
#				of 3 missing instructions.
#		2009-06-07 RSB	Fixed a misprint.
#		2009-06-07 RSB	Changed the construct "2DEC E-6 B12"
#				(which isn't legal in yaYUL) to
#				"2DEC 1.0 E-6 B12".
#		2011-05-07 JL	Removed workarounds.

# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum.  The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum.  Many thanks to both.  The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo.  If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
#	Assemble revision 001 of AGC program LMY99 by NASA 2021112-061
#	16:27 JULY 14, 1969

# Page 492
# RENDEZVOUS NAVIGATION PROGRAM 20
#
# PROGRAM DESCRIPTION
#
# 	MOD NO -- 2
# 	BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# 	THE PURPOSE OF THIS PROGRAM IS TO CONTROL THE RENDEZVOUS RADAR FROM
# 	STARTUP THROUGH ACQUISITION AND LOCKON TO THE CSM AND TO UPDATE EITHER
# 	THE LM OR CSM STATE VECTOR (AS SPECIFIED BY THE ASTRONAUT BY DSKY ENTRY)
# 	ON THE BASIS OF THE RR TRACKING DATA.
#
# CALLING SEQUENCE --
#
# 	ASTRONAUT REQUEST THROUGH DSKY V37E20E
#
# SUBROUTINES CALLED
#
#	R02BOTH	(IMU STATUS CHECK)			FLAGUP
#	GOFLASH	(PINBALL-DISPLAY)			FLAGDOWN
#	R23LEM	(MANUAL ACQUISITION)			BANKCALL
#	LS201	(LOS DETERMINATION)			TASKOVER
#	LS202	(RANGE LIMIT TEST)
#	R61LEM	(PREFERRED TRACKING ATTITUDE)
#	R21LEM	(RR DESIGNATE)				ENDOFJOB
#	R22LEM	(DATA READ)				GOPERF1
#	R31LEM	(RENDEZVOUS PARAMETER DISPLAY)
#	PRIOLARM (PRIORITY DISPLAY)
#
# NORMAL EXIT MODES --
#
# 	P20 MAY BE TERMINATED IN TWO WAYS -- ASTRONAUT SELECTION OF IDLING
#	PROGRAM (P00) BY KEYING V37E00E OR BY KEYING IN V56E
#
# ALARM OR ABORT EXIT MODES --
#
# 	RANGE GREATER THAN 400 NM DISPLAY
#
# OUTPUT
#
# 	TRKMKCNT = NO OF RENDEZVOUS TRACKING MARKS TAKEN (COUNTER)
#
# ERASABLE INITIALIZATION REQUIRED
#
# FLAGS SET + RESET
#
#	SRCHOPT, RNDVZFLG, ACMODFLG, VEHUPFLG, UPDATFLG, TRACKFLG
#
# DEBRIS
#
#	CENTRALS -- A,Q,L

		SBANK=	LOWSUPER	# FOR LOW 2CADR'S.

		BANK	33
		SETLOC	P20S
		BANK

		EBANK=	LOSCOUNT
		COUNT*	$$/P20
PROG22		=	PROG20
PROG20		TC	2PHSCHNG
		OCT	4
		OCT	05022
		OCT	26000		# PRIORITY 26
		TC	LUNSFCHK	# CHECK IF ON LUNAR SURFACE
# Page 493
		TC	ORBCHGO		# YES
		TC	PROG20A -2	# NO -- CONTINUE WITH P20
ORBCHGO		TC	UPFLAG		# SET VEHUPFLG -- CSM STATE
		ADRES	VEHUPFLG	# VECTOR TO BE UPDATED
		CAF	ONE		# SET R2 FOR OPTION CSM WILL NOT
		TS	OPTION2		# CHANGE PRESENT ORBIT
		CAF	OCT00012
		TC	BANKCALL	# DISPLAY ASSUMED CSM ORBIT OPTION
		CADR	GOPERF4
		TC	GOTOPOOH	# TERMINATE
		TC	ORBCHG1		# PROCEED VALUE OF ASSUMED OPTION OK
		TC	-5		# R2 LOADED THRU DSKY
ORBCHG1		CS	P22ONE
		AD	OPTION2
		EXTEND
		BZF	PROG20A
		CAF	V06N33*
		TC	BANKCALL	# FLASH VERB-NOUN TO REQUEST ESTIMATED
		CADR	GOFLASH		# TIME OF LAUNCH
		TC	GOTOPOOH	# TERMINATE
		TC	ORBCHG2		# PROCEED VALUES OK
		TC	-5		# TIME LOADED THRU DSKY
ORBCHG2		TC	INTPRET
		GOTO
			ORBCHG3
	 	BANK	32
		SETLOC	P20S4
		BANK
		COUNT*	$$/P20

ORBCHG3		CALL
			INTSTALL
		DLOAD
			TIG
		STORE	LNCHTM
		STORE	TDEC1		# ESTIMATED LAUNCH TIME
		CLEAR	CLEAR
			VINTFLAG	# LM INTEGRATION
			INTYPFLG	# PRECISION -- ENCKE
		CLEAR	CLEAR
			DIM0FLAG	# NO W-MATRIX
			D6OR9FLG
		CALL
			INTEGRV		# PLANETARY INERTIAL ORIENTATION
		CALL
			GRP2PC
		VLOAD
			RATT1
		STODL	RSUBL		# SAVE LM POSITION
			TAT
# Page 494
		STCALL	TDEC1
			INTSTALL
		SET	CLEAR
			VINTFLAG	# CSM INTEGRATION
			INTYPFLG
		CLEAR	BOFF
			DIM0FLAG
			RENDWFLG	# W MATRIX VALID
			NOWMATX		# NO
		SET	SET		# YES -- SET FOR W MATRIX
			DIM0FLAG
			D6OR9FLG
NOWMATX		CALL
			INTEGRV		# CSM INTEGRATION
		CALL
			GRP2PC
		VLOAD
			VATT1
		STOVL	VSUBC		# SAVE CSM POSITION
			RATT1
		STORE	RSUBC		# SAVE CSM POSITION
		VXV	UNIT		# COMPUTE NORMAL TO CSM ORBITAL PLANE
			VSUBC		# NSUB1=UNIT(R(CM) CROSS V(CM))
		STOVL	20D		# SAVE NSUB1
			RSUBL		# COMPUTE ESTIMATED ORBITAL
		VXV	UNIT		# PLANE CHANGE
			20D		# UCSM = UNIT(R(LM) CROSS NSUB1)
		STOVL	UCSM
			RSUBC		# COMPUTE ANGLE BETWEEN UCSM
		UNIT	DOT		# AND RSUBC
			UCSM		# COS A = UCSM DOT UNIT (R(CM))
		SL1
		STORE	CSTH		# SAVE DOE TIME-THETA SUBROUTINE
		DSQ	BDSU		# COMPUTE SINE A
			ONEB-2
		SQRT
		STOVL	SNTH		# SAVE FOR TIME-THETA SUBROUTINE
			RSUBC		# POSITION OF CSM AT EST. LAUNCH
		STOVL	RVEC		# TIME FOR TIME-THETHA	B-27
			VSUBC		# VELOCITY OF CSM AT EST. LAUNCH.
		VCOMP
		STORE	VVEC		# TIME FOR TIME THETA 	B-5
		CLEAR	CALL
			RVSW
			TIMETHET
		VCOMP
		STORE	NEWVEL		# TERMINAL VELOCITY OF CSM
		DLOAD
			T
		STOVL	TRANSTM		# TRANSFER TIME
# Page 495
			NEWVEL
		ABVAL
		STOVL	20D
			0D
		STORE	NEWPOS		# TERMINAL POSITION OF CSM
		VXV	UNIT		# COMPUTE NORMAL TO SCM ORBITAL PLANE
			RSUBL		# NSUB2 = UNIT(NEWPOS CROSS R(LM))
		VXV	UNIT		# ROTATE TERMINAL VEL INTO DESIRED
			NEWPOS		# ORBITAL PLANE
		VXSC	VSL1		# VSUBC = ABVAL(NEWVEL) $ UNIT (NSUB2
			20D
		STCALL	NCSMVEL		# NEW CSM VELOCITY
			GRP2PC
		CALL
			INTSTALL
		DLOAD	BDSU
			TRANSTM		# LAUNCH TIME -- TRANSFER TIME
			LNCHTM
		STOVL	TET
			NEWPOS
		STORE	RCV
		STOVL	RRECT
			NCSMVEL
		STCALL	VRECT
			MINIRECT
		AXT,2	CALL
			2
			ATOPCSM
		CALL
			INTWAKE0
		EXIT
		TC	BANKCALL
		CADR	PROG20A

		BANK	24
		SETLOC	P20S
		BANK
		COUNT*	$$/P20

		TC	DOWNFLAG	# RESET VEHUPFLG -- LM STATE VECTOR
		ADRES	VEHUPFLG	# TO BE UPDATED
PROG20A		TC	BANKCALL
		CADR	R02BOTH
		TC	UPFLAG
		ADRES	UPDATFLG	# SET UPDATE FLAG
		TC	UPFLAG
		ADRES	TRACKFLG	# SET TRACK FLAG
		TC	UPFLAG
		ADRES	RNDVZFLG	# SET RENDEZVOUS FLAG
		TC	DOWNFLAG
		ADRES	SRCHOPTN	# INSURE SEARCH OPTION OFF
# Page 496
		TC	DOWNFLAG	# ALSO MANUAL ACQUISITION FLAG RESET
		ADRES	ACMODFLG
		TC	DOWNFLAG	# TURN OFF R04FLAG TO ENSURE GETTING
		ADRES	R04FLAG		# ALARM 521 IF CAN'T READ RADAR
		TC	DOWNFLAG	# ENSURE R25 GIMBAL MONITOR IS ENABLED
		ADRES	NORRMON		# (RESET NORRMON FLAG)
		TC	DOWNFLAG	# RESET LOS BEING COMPUTED FLAG
		ADRES	LOSCMFLG
		TC	CLRADMOD
P20LEM1		TC	PHASCHNG
		OCT	04022
		CAF	ZERO		# ZERO MARK COUNTER
		TS	MARKCTR
		TC	INTPRET		# LOS DETERMINATION ROUTINE
		RTB
			LOADTIME
		STCALL	TDEC1
			LPS20.1
		CALL
			LPS20.2		# TEST RANGE R/UTINE
		EXIT
		INDEX	MPAC
		TC	+1
		TC	P20LEMA		# NORMAL RETURN WITHIN 400 N M
526ALARM	CAF	ALRM526		# ERROR EXIT -- RANGE > 400 N. MI.
		TC	BANKCALL
		CADR	PRIOLARM
		TC	GOTOV56		# TERMINATE EXITS P20 VIA V56 CODING
		TC	-4		# PROC (ILLEGAL)
		TC	P20LEM1		# ENTER RECYCLE
		TC	ENDOFJOB

P20LEMA		TC	PHASCHNG
		OCT	04022
		TC	LUNSFCHK	# CHECK LUNAR SURFACE FLAG (P22 FLAG)
		TC	P20LEMB
		TC	BANKCALL
		CADR	R61LEM		# PREFERRED TRACKING ATTITUDE ROUTINE
P20LEMB		TC	PHASCHNG
		OCT	05022		# RESTART AT PRIORITY 10 TO ALLOW V37
		OCT	10000		# REQUESTED PROGRAM TO RUN FIRST
		CAF	PRIO26		# RESTORE PRIORITY 26
		TC	PRIOCHNG
		CA	FLAGWRD1	# IS THE TRACK FLAG SET
		MASK	TRACKBIT
		EXTEND
		BZF	P20LEMWT	# BRANCH -- NO -- WAIT FOR IT TO BE SET
P20LEMB7	CAF	BIT2		# IS RR AUTO MODE DISCRETE PRESENT
		EXTEND
# Page 497
		RAND	CHAN33
		EXTEND
		BZF	P20LEMB3	# YES -- DO AUTOMATIC ACQUISITION (R21)

P20LEMB5	CS	OCT24		# RADAR NOT IN AUTO CHECK IF
		AD	MODREG		# MAJOR MODE IS 20
		EXTEND
		BZF	P20LEMB6	# BRANCH -- YES -- OKAY TO DO PLEASE PERFORM

		AD	NEG2		# ALSO CHECK FOR P22
		EXTEND
		BZF	P20LEMB6	# BRANCH -- YES OK TO DO PLEASE PERFORM
		CAF	ALRM514		# TRACK FLAG SET -- FLASH PRIORITY ALARM 514 --
		TC	BANKCALL	# RADAR GOES OUT OF AUTO MODE WHILE IN USE
		CADR	PRIOLARM
		TC	GOTOV56		# TERMINATE EXITS VIA V56
		TC	P20LEMB		# PROCEED AND ENTER BOTH GO BACK
		TC	P20LEMB		# TO CHECK AUTO MODE AGAIN
		TC	ENDOFJOB
P20LEMB6	CAF	OCT201		# REQUEST RR AUTO MODE SELECTION
		TC	BANKCALL
		CADR	GOPERF1
		TC	GOTOV56		# TERMINATE EXITS P20 VIA V56 CODING
		TC	P20LEMB		# PROCEED CHECKS AUTO MODE DISCRETE AGAIN
		TC	LUNSFCHK	# ENTER INDICATES MANUAL ACQUISITION (R23)
		TC	P20LEMB2	# YES -- R23 NOT ALLOWED -- TURN ON OPR ERROR
		TC	R23LEM		# NO -- DO MANUAL ACQUISITION

P20LEMB1	TC	UPFLAG		# RETURN FROM R23 -- LOCKON ACHIEVED
		ADRES	ACMODFLG	# SET MANUAL FLAG AND GO BACK TO CHECK
		TC	P20LEMB		# RR AUTO MODE

P20LEMB2	TC	FALTON		# TURNS ON OPERATOR ERROR LIGHT ON DSKY
		TC	P20LEMB		# AND GOES BACK TO CHECK AUTO MODE

P20LEMB3	CS	RADMODES	# ARE RR CDUS BEING ZEROED
		MASK	RCDU0BIT
		EXTEND
		BZF	P20LEMB4	# BRANCH -- YES -- WAIT
		CAF	BIT13-14	# IS SEARCH OR MANUAL ACQUISITION FLAG SET
		MASK	FLAGWRD2
		EXTEND
		BZF	P20LEMC3	# ZERO MEANS AUTOMATIC RR ACQUISITION
		TC	DOWNFLAG	# RESET TO AUTO MODE
		ADRES	SRCHOPTN
# Page 498
		TC	DOWNFLAG
		ADRES	ACMODFLG
		TC	P20LEMWT	# WAIT 2.5 SECONDS THEN GO TO RR DATA READ

P20LEMB4	CAF	250DEC
		TC	BANKCALL	# WAIT 2.5 SECONDS WHILE RR CDUS ARE BEING
		CADR	DELAYJOB	# ZEROED -- THEN GO BACK AND CHECK AGAIN
		TC	P20LEMB3

P20LEMC3	TC	INTPRET
		RTB
			LOADTIME
		STCALL	TDEC1
			UPPSV
P20LEMC4	EXIT
P20LEMC		TC	PHASCHNG
		OCT	04022
		CAE	FLAGWRD0	# IS THE RENDEZVOUS FLAG SET
		MASK	RNDVZBIT
		EXTEND
		BZF	ENDOFJOB	# NO -- EXIT P20
		CAE	FLAGWRD1	# IS TRACK FLAG SET (BIT 5 FLAGWORD 1)
		MASK	TRACKBIT
		EXTEND
		BZF	P20LEMD		# BRANCH -- TRACK FLAG NOT ON -- WAIT 15 SECONDS
P20LEMF		TC	R21LEM

P20LEMWT	CAF	250DEC
		TC	TWIDDLE		# USE INSTEAD OF WAITLIST SINCE SAME BANK
		ADRES	P20LEMC1	# WAIT 2.5 SECONDS
		CAE	FLAGWRD1	# IS TRACK FLAG SET
		MASK	TRACKBIT
		EXTEND
		BZF	ENDOFJOB	# NO -- EXIT WITHOUT DOING 2.7 PHASE CHANGE
P20LMWT1	TC	PHASCHNG
		OCT	40072
		TC	ENDOFJOB

P20LEMC1	CAE	FLAGWRD0	# IS RENDEZVOUS FLAG SET
		MASK	RNDVZBIT
		EXTEND
		BZF	TASKOVER	# NO -- EXIT P20/R22
		CAE	FLAGWRD1	# IS TRACK FLAG SET
		MASK	TRACKBIT
		EXTEND
		BZF	P20LEMC2	# NO -- DON'T SCHEDULE R22 JOB
# Page 499
		CAF	PRIO26		# YES -- SCHEDULE R22 JOB (RR DATA READ)
		TC	FINDVAC
		EBANK=	LOSCOUNT
		2CADR	R22LEM42

		TC	TASKOVER

P20LEMC2	TC	FIXDELAY	# TRACK FLAG NOT SET, WAIT 15 SECONDS
		DEC	1500		# AND CHECK AGAIN

		TC	P20LEMC1

P20LEMD		CAF	1500DEC
		TC	TWIDDLE		# WAITLIST FOR 15 SECONDS
		ADRES	P20LEMD1
		TC	ENDOFJOB

P20LEMD1	CAE	FLAGWRD1	# IS TRACK FLAG SET
		MASK 	TRACKBIT
		CCS	A
		TCF	P20LEMD2	# YES -- SCHEDULE DESIGNATE JOB
		TC	FIXDELAY	# NO -- WAIT 15 SECONDS
		DEC	1500
		TC	P20LEMD1

P20LEMD2	CAF	PRIO26		# SCHEDULE JOB TO DO R21
		TC	FINDVAC
		EBANK=	LOSCOUNT
		2CADR	P20LEMC3	# START AT PERM.  MEMORY INTEGRATION

		TC	TASKOVER

250DEC		DEC	250
ALRM526		OCT	00526
OCT201		OCT	00201
ALRM514		OCT	514
MAXTRIES	DEC	60
OCT00012	OCT	00012
P22ONE		OCT	00001
ONEB-2		2DEC	1.0 B-2

V06N33*		VN	0633
UPPSV		STQ	CALL		# UPDATES PERMANENT STATE VECTORS
			LS21X		# 	TO PRESENT TIME
			INTSTALL
		CALL
# Page 500
			SETIFLGS
		BOF	SET		# IF W-MATRIX INVALID, DON'T INTEGRATE IT
			RENDWFLG
			UPPSV1
			DIM0FLAG	# SET DIM0FLAG TO INTEGRATE W-MATRIX
		BON	SET
			SURFFLAG	# IF ON LUNAR SURFACE W IS 6X6
			UPPSV5
			D6OR9FLG	# OTHERWISE 9X9
UPPSV5		BOF
			VEHUPFLG
			UPPSV3
UPPSV1		SET
			VINTFLAG
		CALL
			INTEGRV
		CALL			# GROUP 2 PHASE CHANGE
			GRP2PC		# TO PROTECT INTEGRATION
		CALL
			INTSTALL
		DLOAD	CLEAR		# GET TETCSM TO STORE IN TDEC FOR LM INT.
			TETCSM
			VINTFLAG
UPPSV4		CALL			# INTEGRATE OTHER VEHICLE
			SETIFLGS	#	WITHOUT W-MATRIX
		STCALL	TDEC1
			INTEGRV
		BOFF	VLOAD
			SURFFLAG
			P20LEMC4
			RCVLEM
		VSR2
		STOVL	LMPOS
			VCVLEM
		VSR2
		STORE	LMVEL
		GOTO
			LS21X

UPPSV3		CLEAR	CALL
			VINTFLAG
			INTEGRV
		CALL
			GRP2PC
		CALL
			INTSTALL
		SET	DLOAD
			VINTFLAG
			TETLEM		# GET TETLEM TO STORE IN TDEC FOR CSM INT.
# Page 501
		GOTO
			UPPSV4
		EBANK=	LOSCOUNT
		COUNT*	$$/P22

# Page 502
# PROGRAM DESCRIPTION
#
#	PREFERRED TRACKING ATTITUDE PROGRAM P25
#	MOD NO -- 3
# 	BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
#	THE PURPOSE OF THIS PROGRAM IS TO COMPUTE THE PREFERRED TRACKING
# 	ATTITUDE OF THE LM TO CONTINUOUSLY POINT THE LM TRTACKING BEACON AT THE
#	CSM AND TO PERFORM THE MANEUVER TO THE PREFERRED TRACKING ATTITUDE AND
# 	CONTINUOUSLY MAINTAIN THIS ATTITUDE WITHIN PRESCRIBED LIMITS.
#
# CALLING SEQUENCE --
#
#	ASTRONAUT REQUEST THROUGH DSKY V37E25E
#
# SUBROUTINES CALLED --
#
#	BANKCALL					FLAGUP
#	R02BOTH	(IMU STATUS CHECK)			ENDOFJOB
#	R61LEM	(PREF TRK ATT ROUT)			WAITLIST
#	TASKOVER					FINDVAC
#
# NORMAL EXIT MODES --
#
# 	P25 MAY BE TERMINATED IN TWO WAYS -- ASTRONAUT SELECTION OF IDLING
#	PROGRAM (P00) BY KEYING V37E00E OR BY KEYING IN V56E
#
# ALARM OR ABORT EXIT MODES --
#
#	NONE
#
# OUTPUT
#
# ERASABLE INITIALIZATION REQUIRED
#
# FLAGS SET + RESET
#
#	TRACKFLG, P25FLAG
#
# DEBRIS
#
#	NONE

		EBANK=	LOSCOUNT
		COUNT*	$$/P25
PROG25		TC	2PHSCHNG
		OCT	4		# MAKE GROUP 4 INACTIVE (VERB 37)
		OCT	05022
		OCT	26000		# PRIORITY 26

		TC	BANKCALL
		CADR	R02BOTH		# IMU STATUS CHECK
		TC	UPFLAG
		ADRES	TRACKFLG	# SET TRACK FLAG
		TC	UPFLAG
		ADRES	P25FLAG		# SET P25FLAG
P25LEM1		TC	PHASCHNG
		OCT	04022
		CAF	P25FLBIT
		MASK	STATE		# IS P25FLAG SET
		EXTEND
		BZF	ENDOFJOB
		CAF	TRACKBIT	# IS TRACKFLAG SET?
		MASK	STATE +1
		EXTEND
# Page 503
		BZF	P25LMWT1	# NO -- SKIP PHASE CHANGE AND WAIT 1 MINUTE
		CAF	SEVEN		# CALL R65 -- FINE PREFERRED
		TS	R65CNTR
		TC	BANKCALL	# TRACKING ATTITUDE ROUTINE
		CADR	R65LEM
		TC	P25LEM1		# THEN GO CHECK FLAGS
P25LEMWT	TC	PHASCHNG
		OCT	00112
P25LMWT1	CAF	60SCNDS
		TC	TWIDDLE		# WAIT ONE MINUTE THEN CHECK AGAIN
		ADRES	P25LEM2
		TC	ENDOFJOB
P25LEM2		CAF	PRIO14
		TC	FINDVAC
		EBANK=	LOSCOUNT
		2CADR	P25LEM1

		TC	TASKOVER
60SCNDS		DEC	6000

# Page 504
# DATA READ ROUTINE 22 (LEM)
# PROGRAM DESCRIPTION
#
#	MOD NO -- 2
#	BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
#	TO PROCESS AUTOMATIC RR MARK DATA TO UPDATE THE STATE VECTOR OF EITHER
# 	LM OR CSM AS DEFINED IN THE RENDEZVOUS NAVIGATION PROGRAM (P20)
#
# CALLING SEQUENCE --
#
#	TC	BANKCALL
#	CADR	R22LEM
#
# SUBROUTINES CALLED --
#
#	LSR22.1		GOFLASH		WAITLIST
#	LSR22.2		PRIOLARM	BANKCALL
#	LSR22.3		R61LEM
#
# NORMAL EXIT MODES --
#
#	R22 WILL CONTINUE TO RECYCLE, UPDATING STATE VECTORS WITH RADAR DATA
#	UNTIL P20 CEASES TO OPERATE (RENDEZVOUS FLAG SET TO ZERO) AT WHICH TIME
#	R22 WILL TERMINATE SELF.
#
# ALARM OR ABORT EXIT MODES --
#
#	PRIORITY ALARM
#	PRIORITY ALARM 525 LOS NOT WITHIN 3 DEGREE LIMIT
#
# OUTPUT
#
#	SEE OUTPUT FROM LSR22.3
#
# ERASABLE INITIALIZATION REQUIRED
#
#	SEE LSR22.1, LSR22.2, LSR22.3
#
# FLAGS SET + RESET
#
#	NOANGFLG
#
# DEBRIS
#
#	SEE LSR22.1, LSR22.2, LSR22.3

		EBANK=	LRS22.1X
		COUNT*	$$/R22
R22LEM		TC	PHASCHNG
		OCT	04022
		CAF	RNDVZBIT	# IS RENDEZVOUS FLAG SET?
		MASK	STATE
		EXTEND
		BZF	ENDOFJOB	# NO -- EXIT R22 AND P20
		CAF	TRACKBIT	# IS TRACKFLAG SET?
		MASK	STATE +1
		EXTEND
		BZF	R22WAIT		# NO WAIT
R22LEM12	CAF	BIT14		# IS RR AUTO TRACK ENABLE DISCRETE STILL
		EXTEND			# ON (A MONITOR REPOSITION BY R25 CLEARS IT)
		RAND	CHAN12
		EXTEND
		BZF	P20LEMA		# NO -- RETURN TO P20
		CAF	BIT2		# YES
		EXTEND			# IS RR AUTO MODE DISCRETE PRESENT
		RAND	CHAN33
# Page 505
		EXTEND
		BZF	+2		# YES CONTINUE
		TC	P20LEMB5	# NO -- SET IT
		CS	RADMODES	# ARE RR CDUS BEING ZEROED
		MASK	RCDU0BIT
		EXTEND
		BZF	R22LEM42	# CDUS BEING ZEROED
		TC	PHASCHNG	# IF A RESTART OCCURS, AND EXTRA RADAR
		OCT	00152		# READING IS TAKEN, SO BAD DATA ISN'T USED
		TC	BANKCALL	# YES READ DATA + CALCULATE LOS
		CADR	LRS22.1		# DATA READ SUBROUTINE
		INDEX	MPAC
		TC	+1
		TC	R22LEM2		# NORMAL RETURN (GOOD DATA)
		TC	P20LEMC		# COULD NOT READ RADAR -- TRY TO REDESIGNATE
		CAF	ALRM525		# RR LOS NOT WITHIN 3 DEGREES (ALARM)
		TC	BANKCALL
		CADR	PRIOLARM
		TC	GOTOV56		# TERMINATE EXITS P20 VIA V56 CODING
		TC	R22LEM1		# PROC (DISPLAY DELTA THETA)
		TC	-5		# ENTER (ILLEGAL OPTION)
		TC	ENDOFJOB

R22LEM1		TC	PHASCHNG
		OCT	04022
		CAF	V06N05		# DISPLAY DELTA THETA
		TC	BANKCALL
		CADR	PRIODSP
		TC	GOTOV56		# TERMINATE EXITS P20 VIA V56 CODING
		TC	R22LEM2		# PROC (OK CONTINUE)
		TC	P20LEMC		# ENTER (RECYCLE)
R22LEM2		TC	PHASCHNG
		OCT	04022
		TC	LUNSFCHK	# CHECK IF ON LUNAR SURFACE (P22FLAG SET)
		TC	R22LEM3		# YES -- BYPASS FLAG CHECKS AND LRS22.2
		CA	FLAGWRD1	# IS TRACK FLAG SET
		MASK	TRACKBIT
		EXTEND
		BZF	R22WAIT		# NO -- WAIT
		TC	BANKCALL	# YES
		CADR	LRS22.2		# CHECKS RR BORESIGHT WITHIN 30 DEG OF +Z
		INDEX	MPAC
		TC	+1
		TC	R22LEM3		# NORMAL RETURN (LOS WITHIN 30 OF Z-AXIS)
		TC	BANKCALL
		CADR	R61LEM
		TC	R22WAIT		# NOT WITHIN 30 DEG OF Z-AXIS
R22LEM3		CS	FLAGWRD1	# SHOULD WE BYPASS STATE VECTOR UPDATE
		MASK	NOUPFBIT	# (IS NO UPDATE FLAG SET?)
# Page 506
		EXTEND
		BZF	R22LEM42	# BRANCH -- YES
		CA	FLAGWRD1	# IS UPDATE FLAG SET
		MASK	UPDATBIT
		EXTEND
		BZF	R22LEM42	# UPDATE FLAG NOT SET
		CAF	PRIO26		# INSURE HIGH PRIO IN RESTART
		TS	PHSPRDT2

		TC	INTPRET
		GOTO
			LSR22.3
R22LEM93	EXIT			# NORMAL EXIT FROM LSR22.3
		TC	PHASCHNG	# PHASE CHANGE TO PROTECT AGAINST
		OCT	04022		# CONFLICT WITH GRP2PC ERASEABLE
		TCF	R22LEM44
R22LEM96	EXIT
		CAF	ZERO		# SET N49FLAG = ZERO TO INDICATE
		TS	N49FLAG		# V06 N49 DISPLAY HASN'T BEEN ANSWERED
		TC	PHASCHNG
		OCT	04022		# TO PROTECT DISPLAY
		CAF	PRIO27		# PROTECT DISPLAY
		TC	NOVAC
		EBANK=	N49FLAG
		2CADR	N49DSP

		TC	INTPRET
		SLOAD
			N49FLAG
		BZE	BMN		# LOOP TO CHECK IF FLAG
			-3		# SETTING CHANGED -- BRANCH -- NO
			R22LEM7		# PROCEED
		EXIT			# DISPLAY ANSERED BY RECYCLE
		TC	LUNSFCHK	# ARE WE ON LUNAR SURFACE
		TC	R22WAIT		# YES -- 15 SECOND DELAY
		CA	ZERO		# NO -- SET R65COUNTER = 0, DO FINE
		TC	R22LEM45	# TRACKING TAKE ANOTHER RADAR READING
R22LEM7		CALL			# PROCEED
			GRP2PC		# PHASE CHANGE AND
		GOTO			# GO TO INCOPORATE DATA.
			ASTOK
R22LEM44	INCR	MARKCTR		# INCREMENT COUNT OF MARKS INCORPORATED.
		TC	LUNSFCHK	# ARE WE ON LUNAR SURFACE
		TC	R22LEM46	# YES -- WAIT 2 SECONDS
		CA	FIVE		# NOT ON LUNAR SURFACE
		TC	R22LEM45	# R65COUNTER = 5
R22LEM42	TC	LUNSFCHK	# CHECK IF ON LUNAR SURFACE (P22FLAG SET)
		TC	R22LEM46	# YES -- WAIT 2 SECONDS
		CA	TWO		# NO -- SET R65COUNTER = 2
R22LEM45	TS	R65CNTR
# Page 507
		TC	BANKCALL
		CADR	R65LEM		# FINE PREFERRED TRACKING ATTITUDE
		TC	R22LEM
R22WAIT		CAF	1500DEC
		TC	P20LEMWT +1

R22LEM46	CAF	2SECS
		TC	BANKCALL	# WAIT 2 SECONDS AND TAKE ANOTHER MARK
		CADR	DELAYJOB
		TC	R22LEM

N49DSP		CAF	V06N49NB
		TC	BANKCALL	# EXCESSIVE STATE VECTOR UPDATE -- FLASH
		CADR	PRIODSP		# VERB 06 NOUN 49 R1=DELTA R, R2=DELTA V
		TC	GOTOV56		# TERMINATE -- EXIT R22 AND P20
		CS	ONE		# PROCEED -- N49FLAG = -1
		TS	N49FLAG		# RECYCLE -- N49FLAG = + VALUE
		TC	ENDOFJOB
R22RSTRT	TC	PHASCHNG	# IF A RESTART OCCURS WHILE READING RADAR
		OCT	00152		# COME HERE TO TAKE A RANGE-RATE READING
		TC	BANKCALL	# WHICH ISN'T USED TO PREVENT TAKING A BAD
		CADR	RRRDOT		# READING AND TRYING TO INCORPORATE THE
		TC	BANKCALL	# BAD DATA
		CADR	RADSTALL	# WAIT FOR READ COMPLETE
		TC	P20LEMC		# COULD NOT READ RADAR -- TRY TO REDISGNATE
		TC	R22LEM		# READ SUCCESSFUL -- CONTINUE AT R22

ALRM525		OCT	00525
V06N05		VN	00605
V06N49NB	VN	00649
1500DEC		DEC	1500

# LUNSFCHECK -- CLOSED SUBROUTINE TO CHECK IF ON LUNAR SURFACE (P22FLAG)
#	RETURNS TO CALLER +1 IF P22FLAG SET
#		TO CALLER +2 IF P22FLAG NOT SET

		COUNT* 	$$/P22
LUNSFCHK	CS	FLAGWRD8	# CHECK IF ON LUNAR SURFACE
		MASK	SURFFBIT	# IS SURFFLAG SET?
		CCS	A		# BRANCH -- P22FLAG SET
		INCR	Q		# NOT SET
		TC	Q		# RETURN

# Page 508
# RR DESIGNATE ROUTINE (R21LEM)
# PROGRAM DESCRIPTION
#
# 	MOD NO -- 2
#	BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# 	TO POINT THE RENDEZVOUS RADAR AT THE CSM UNTIL AUTOMATIC ACQUISITION
# 	OF THE CSM IS ACCOMPLISHED BY THE RADAR.  ROUTINE IS CALLED BY P20.
#
# CALLING SEQUENCE --
#
#	TC	BANKCALL
#	CADR	R21LEM
#
# SUBROUTINES CALLED --
#
#	FINDVAC		FLAGUP		ENDOFJOB	PRIOLARM
#	NOVAC		INTPRET		LPS20.1		PHASCHNG
#	WAITLIST	JOBSLEEP	JOBWAKE		FLAGDOWN
#	TASKOVER	BANKCALL	RADSTALL	RRDESSM
#
# NORMAL EXIT MODES
#
#	WHEN LOCK-ON IS ACHIEVED, BRANCH WILL BE TO P20 WHERE R22 (DATA READ
#	WILL BE SELECTED OR A NEED FOR A MANEUVER (BRANCH TO P20LEMA)
#
# ALARM OR ABORT EXIT MODES --
#
#	PRIORITY ALARM 503 WHEN LOCK-ON HASN'T BEEN ACHIEVED AFTER 30SECS --
#	THIS REQUIRES ASTRONAUT INTERFACE: SELECTION OF SEARCH OPTION OF
#	ACQUISITION
#
# OUTPUT
#
#	SEE LPS20.1, RRDESSM
#
# ERASABLE INITIALIZATION REQUIRED
#
#	RRTARGET, RADMODES ARE USED BY LPS20.1 AND RRDESSM
#
# FLAGS SET + RESET
#
#	LOSCMFLG	LOKONSW
#
# DEBRIS
#
#	SEE LPS20.1, RRSESSM

		EBANK=	LOSCOUNT
		COUNT*	$$/R21
R21LEM		CS	BIT14		# REMOVE RR SELF TRACK ENABLE
		EXTEND
		WAND	CHAN12
		TC	LUNSFCHK
		TC	R21LEM5
		CAF	ZERO		# COMMAND ANTENNA TO MODE CENTER
		TS	TANG		# IF NOT ON SURFACE -- MODE 1 -- (T=0,S=0)
		TS	TANG +1
		TC	R21LEM6
R21LEM5		CAF	BIT12
		MASK	RADMODES
		CCS	A
		TC	R21LEM10
		CAF	BIT15
		TS	TANG
		CS	HALF
		TS	TANG +1

# Page 509
R21LEM6		TC	DOWNFLAG
		ADRES	LOKONSW
		TC	BANKCALL
		CADR	RRDESNB
		TC	+1
		TC	BANKCALL
		CADR	RADSTALL
		TC	R21-503		# BAD RETURN FROM DESIGNATE -- ISSUE ALARM
R21LEM10	TC	UPFLAG
		ADRES	LOSCMFLG	# EVERY FOURTH PASS THRU DODES
		CAF	MAXTRIES	# ALLOW 60 PASSES (APPROX 45 SECONDS)
		TS	DESCOUNT	# TO DESIGNATE AND LOCK ON
R21LEM2		CAF	THREE
		TS	LOSCOUNT
R21LEM1		TC	INTPRET
		RTB	DAD
			LOADTIME
			HALFSEC		# EXTRAPOLATE TO PRESENT TIME + .5 SEC.
		STCALL	TDEC1		# LOS DETERMINATION ROUTINE
			LPS20.1
		EXIT
R21LEM3		TC	UPFLAG		# SET LOKONSW TO RADAR -- ON DESIRED
		ADRES	LOKONSW
		TC	DOWNFLAG
		ADRES	NORRMON
		TC	INTPRET
		CALL			# INPUT (RRTARGET UPDATED BY LPS20.1)
			RRDESSM		# DESIGNATE ROUTINE
		EXIT
		TC	R21LEM4		# LOS NOT IN MODE 2 COVERAGE
					# ON LUNAR SURFACE
		TC	P20LEMA		# VEHICLE MANEUVER REQUIRED.
		TC	BANKCALL	# NO VEHICLE MANEUVER REQUIRED
		CADR	RADSTALL	# WAIT FOR DESIGNATE COMPLETE -- LOCKON OR
		TC	+2		# BAD END -- LOCKON NOT ACHIEVED IN 60 TRIES
		TC	R21END		# EXIT ROUTINE RETURN TO P20 (LOCK-ON)
R21-503		CAF	ALRM503		# ISSUE ALARM 503
		TC	BANKCALL
		CADR	PRIOLARM
		TC	GOTOV56		# TERMINATE EXITS P20 VIA V56 CODING
		TC	R21SRCH		# PROC
		TC	P20LEMC3
		TC	ENDOFJOB
R21END		TC	DOWNFLAG
		ADRES	LOSCMFLG	# RESET LOSCMFLG
		TC	R21DISP		# PUT UP VERIFY MAIN LOBE LOCKON DISPLAY
R21SRCH		TC	PHASCHNG
		OCT	04022
		TC	R24LEM		# SEARCH ROUTINE
ALRM503		OCT	00503
# Page 510
ALRM527		OCT	527

R21LEM4		CAF	MAXTRIES	# SET UP COUNTER FOR
		TS	REPOSCNT	# 60 PASSES (APPROX 600 SECS.)
		TC	UPFLAG
		ADRES	FSPASFLG	# SET FIRST PASS FLAG
		TC	DOWNFLAG	# RESET LOS BEING
		ADRES	LOSCMFLG	# COMPUTED FLAG
		TC	INTPRET
R21LEM12	RTB
			LOADTIME
		DAD
			TENSEC		# TIME T = T + 10 SECS.
		STORE	REPOSTM		# SAVE FOR LONGCALL AND UPPSV
		STCALL	TDEC1
			LPS20.1		# COMPUTE LOS AT TIME T
		CALL
			RRDESSM
		EXIT
		TC	R21LEM13	# LOS NOT IN MODE 2 COVERAGE
		TC	ENDOFJOB	# VEHICLE MANEUVER REQUIRED
		TC	KILLTASK
		CADR	BEGDES
		TC	INTPRET
		BOF
			FSPASFLG	# FIRST PASS THRU REPOSITION
			R21LEMB		# NO -- GO TO CONTINUOUS DESIGNATE
		CLRGO
			FSPASFLG	# YES -- RESET FIRST PASS FLAG
			R21LEM7 +1
R21LEM13	CCS	REPOSCNT	# HAVE WE TRIED 60 TIMES?
		TC	R21LEM7		# NO -- ADD 10 SECS.  RECOMPUTE LOS
		TC	R21LEM11	# YES -- PUT OUT ALARM 530
R21LEM7		TS	REPOSCNT
		TC	INTPRET
		DLOAD	GOTO
			REPOSTM
			R21LEM12 +2
R21LEMB		DLOAD
			REPOSTM
		STCALL	TDEC1
			UPPSV
		EXIT
		TC	UPFLAG		# SET RADMODES BIT 15 FOR
		ADRES	CDESFLAG	# CONTINUOUS DESIGNATION
		TC	DOWNFLAG
		ADRES	LOKONSW
		TC	UPFLAG
		ADRES	NORRMON
# Page 511
		TC	BANKCALL
		CADR	RRDESNB
		TC	+1
		TC	INTPRET
		RTB	BDSU
			LOADTIME	# COMPUTE DELTA TIME
			REPOSTM		# FOR LONGCALL
		STORE	DELTATM
		EXIT
		EXTEND
		DCA	DELTATM
		TC	LONGCALL
		EBANK=	LOSCOUNT
		2CADR	R21LEM9

		TC	ENDOFJOB
R21LEM9		TC	KILLTASK
		CADR	STDESIG
		TC	CLRADMOD
		CAF	PRIO26
		TC	FINDVAC
		EBANK=	LOSCOUNT
		2CADR	R21LEM10

		TC	TASKOVER
R21LEM11	CAF	ALRM530		# ALARM 530 -- LOS NOT IN COVERAGE
		TC	BANKCALL	# AFTER TRYING TO DESIGNATE FOR
		CADR	PRIOLARM	# 600 SECS.
		TC	GOTOV56
		TC	GOTOV56
		TC	GOTOV56
		TC	ENDOFJOB
ALRM530		OCT	00530
TENSEC		2DEC	1000 B-28

HALFSEC		2DEC	50

R21DISP		TC	PHASCHNG
		OCT	04022
		CAF	V06N72PV	# FLASH V 50 N 72 -- PLEASE PERFORM RR
		TC	BANKCALL	# MAIN LOBE LOCKON VERIFICATION
		CADR	GOPERF2R
		TC	GOTOV56		# TERMINATE EXITS VIA V 56
		TC	P20LEMWT	# PROCEED CONTINUES TO R22
		TC 	-5		# ENTER ILLEGAL
		CAF	BIT7
		TC	LINUS		# SET BITS TO MAKE THIS A PRIORITY DISPLAY
		TC	ENDOFJOB

# Page 512
V06N72PV	VN	00672

# Page 513
# MANUAL ACQUISITION ROUTINE R23LEM
# PROGRAM DESCRIPTION
#
#	MOD NO -- 2
#	BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
#	TO ACQUIRE THE CSM BY MANUAL OPERATION OF THE RENDEZVOUS RADAR
#
# CALLING SEQUENCE --
#
#	TC	R23LEM
#
# SUBROUTINES CALLED
#
#	BANKCALL	R61LEM
#	SETMINDB	GOPERF1
#
# NORMAL EXIT MODES --
#
#	IN RESPONSE TO THE GOPERF1,	SELECTION OF ENTER WILL RECYCLE R23
#					SELECTION OF PROC WILL CONTINUE R23
#					SELECTION OF TERM WILL TERMINATE R23 + P20
#
# ALARM OR ABORT EXIT MODES --
#
#	SEE NORMAL EXIT MODES ABOVE
#
# OUTPUT
#
#	N.A.
#
# ERASABLE INITIALIZATION REQUIRED --
#
#	ACMODFLG MUST BE SET TO 1 (MANUAL MODE)

		EBANK=	GENRET
		COUNT*	$$/R23
R23LEM		TC	UPFLAG		# SET NO ANGLE MONITOR FLAG
		ADRES	NORRMON
		INHINT
		TC	IBNKCALL	# SELECT MINIMUM DEADBAND
		CADR	SETMINDB
		RELINT
R23LEM1		CAF	BIT14		# ENABLE TRACKER
		EXTEND
		WOR	CHAN12
		CAF	OCT205
		TC	BANKCALL
		CADR	GOPERF1
		TC	R23LEM2		# TERMINATE
		TC	R23LEM11	# PROCEDE
		TC	R23LEM3		# ENTER -- DO ANOTHER MANEUVER
R23LEM11	INHINT
		TC	RRLIMCHK	# YES -- CHECK IF ANTENNA IS WITHIN LIMITS
		ADRES	CDUT
		TC	OUTOFLIM	# NOT WITHIN LIMITS
		TC	IBNKCALL	# RESTORE DEADBAND TO
		CADR	RESTORDB	# ASTRONAUT SELECTED VALUE
		RELINT
		TC	DOWNFLAG	# CLEAR NO ANGLE MONITOR FLAG
		ADRES	NORRMON
		TC	P20LEMB1	# RADAR IS LOCKED ON CONTINUE IN P20
OUTOFLIM	RELINT
# Page 514
		CAF	OCT501PV
		TC	BANKCALL	# ISSUE ALARM -- RR ANTENNA NOT WITHIN
		CADR	PRIOLARM	# LIMITS
		TC	R23LEM2		# TERMINATE -- EXIT R23 TO R00 (GO TO POOH)
		TC	OUTOFLIM +1	# PROCEED ILLEGAL
		TC	R23LEM3		# RECYCLE -- TO ANOTHER MANEUVER
		TC	ENDOFJOB
R23LEM2		TC	DOWNFLAG	# CLEAR NO ANGLE MONITOR FLAG
		ADRES	NORRMON
		TC	GOTOV56		# AND EXIT VIA V56
R23LEM3		TC	BANKCALL
		CADR	R61LEM
		TC	R23LEM1

OCT501PV	OCT	501
OCT205		OCT	205

# Page 515
# SEARCH ROUTINE R24LEM
# PROGRAM DESCRIPTION
#
#	MOD NO -- 2
#	BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
#	TO ACQUIRE THE CSM BY A SEARCH PATTERN WHEN THE RENDEZVOUS RADAR HAS
#	FAILED TO ACQUIRE TEH CSM IN THE AUTOMATIC TRACKING MODE AND TO ALLOW
# 	THE ASTRONAUT TO CONFIRM THAT REACQUISITION HAS NOT BEEN IN SIDELOBE.
#
# CALLING SEQUENCE
#
#	CAF	PRIONN
#	TC	FINDVAC
#	EBANK=	DATAGOOD
#	2CADR	R24LEM
#
# SUBROUTINES CALLED
#
#	FLAGUP		FLAGDOWN	BANKCALL
#	R61LEM		GOFLASHR	FINDVAC
#	ENDOFJOB	NOVAC		LSR24.1
#
# NORMAL EXIT MODES --
#
#	ASTRONAUT RESPONSE TO DISPLAY OF OMEGA AND DATAGOOD.  HE CAN EITHER
# 	REJECT BY TERMINATING (SEARCH OPTION AND RESELECTING P20) OR ACCEPT BY
#	PROCEEDING (EXIT ROUTINE AND RETURN TO AUTO MODE IN P20)
#
# ALARM OR ABORT EXIT MODES --
#
#	SEE NORMAL EXIT MODES ABOVE
#
# OUTPUT --
#
#	SEE OUTPUT FROM LSR24.1 + R61LEM
#
# ERASABLE INITIALIZATION REQUIRED
#
#	SET INPUT FOR LSR24.1
#
# FLAGS SET + RESET
#
#	SRCHOPT, ACMODFLG

		EBANK=	DATAGOOD
		COUNT*	$$/R24
R24LEM		TC	UPFLAG
		ADRES	SRCHOPTN	# SET SRCHOPT FLAG
		TC	DOWNFLAG	# RESET LOS BEING COMPUTED FLAG TO MAKE
		ADRES	LOSCMFLG	# SURE DODES DOESN'T GO TO R21
R24LEM1		CAF	ZERO
		TS	DATAGOOD	# ZERO OUT DATA INDICATOR
		TS	OMEGAD		# ZERO OMEGA DISPLAY REGS
		TS	OMEGAD +1	# ZERO OMEGA DISPLAY REGS
R24LEM2		TC	PHASCHNG
		OCT	04022
		CAF	V16N80
		TC	BANKCALL
		CADR	PRIODSPR
		TC	GOTOV56
		TC	R24END		# PROCEED EXIT R24 TO P20LEM1

		TC	R24LEM3		# RECYCLE -- CALL R61 TO MANEUVER S/C
# Page 516
		TC	BANKCALL
		CADR	LRS24.1
R24END		TC	KILLTASK
		CADR	CALLDGCH
		TC	CLRADMOD	# CLEAR BITS 10 & 15 OF RADMODES.
		TCF	P20LEM1		# AND GO TO 400 MI. RANGE CHECK IN P20

		BLOCK	3
		SETLOC	FFTAG6
		BANK
		COUNT*	$$/R24

CLRADMOD	CS	BIT10+15
		INHINT
		MASK	RADMODES
		TS	RADMODES
		CS	BIT2		# DISABLE RR ERROR COUNTERS
		EXTEND
		WAND	CHAN12		# USER WILL RELINT

		TC	Q

BIT10+15	OCT	41000
		BANK	24
		SETLOC	P20S
		BANK
		COUNT*	$$/R24

R24LEM3		TC	PHASCHNG
		OCT	04022
		TC	KILLTASK
		CADR	CALLDGCH	# KILL WAITLIST FOR NEXT POINT IN PATTERN
		TC	CLRADMOD	# CLEAR BITS 10 + 15 OF RADMODES TO KILL
		RELINT			# HALF SECOND DESIGNATE LOOP
		CAF	.5SEC
		TC	BANKCALL	# WAIT FOR DESIGNATE LOOP TO DIE
		CADR	DELAYJOB
		TC	LUNSFCHK	# CHECK IF ON LUNAR SURFACE
		TC	R24LEM4		# YES -- DON'T DO ATTITUDE MANEUVER
		TC	BANKCALL	# CALL R61 TO DO PREFERRED TRACKING
		CADR	R61LEM		# ATTITUDE MANEUVER
R24LEM4		CAF	ZERO		# ZERO OUT RADCADR (WHICH WAS SET BY
		TS	RADCADR		# ENDRADAR WHEN DESIGNATE STOPPED) SO THAT
					# RRDESSM WILL RETURN TO CALLER
		TC	R24LEM2		# AND GO BACK TO PUT UP V16 N80 DISPLAY

V16N80		VN	01680

# Page 517
# PREFERRED TRACKING ATTITUDE ROUTINE R61LEM
# PROGRAM DESCRIPTION
#
#	MOD NO: 3		DATE: 4-11-67
#	MOD BY: P. VOLANTE, SDC
#
# FUNCTIONAL DESCRIPTION --
#
#	TO COMPUTE THE PREFERRED TRACKING ATTITUDE OF THE LM TO ENABLE RR
#	TRACKING OF THE CSM AND TO PERFORM THE MANEUVER TO THE PREFERRED
#	ATTITUDE.
#
# CALLING SEQUENCE --
#
#	TC	BANKCALL
#	CADR	R61LEM
#
# SUBROUTINES CALLED
#
#	LPS20.1		VECPOINT
#	KALCMAN3
#
# NORMAL EXIT MODES --
#
#	NORMAL RETURN IS TO CALLER + 1
#
# ALARM OR ABORT EXIT MODES --
#
#	TERMINATE P20 + R61 BY BRANCHING TO P20END IF BOTH TRACKFLAG +
#	RENDEZVOUS FLAG ARE NOT SET.
#
# OUTPUT --
#
#	SEE OUTPUT FOR LPS20.1 + ATTITUDE MANEUVER ROUTINE (R60)
#
# ERASABLE INITIALIZATION REQUIRED
#
#	GENRET USED TO SAVE Q FOR RETURN
#
# FLAGS SET + RESET
#
#	3AXISFLG
#
# DEBRIS
#
# 	SEE SUBROUTINES

		SETLOC	R61
		BANK
		EBANK=	LOSCOUNT
		COUNT*	$$/R61
R61LEM		TC	MAKECADR
		TS	GENRET
		TC	UPFLAG		# SET R61 FLAG
		ADRES	R61FLAG
		TC	R61C+L01
R65LEM		TC	MAKECADR
		TS	GENRET
		TC	DOWNFLAG	# RESET R61 FLAG
		ADRES	R61FLAG
R61C+L01	CAF	TRACKBIT	# TRACKFLAG
		MASK	STATE +1
		EXTEND
		BZF	R65WAIT		# NOT SET
R61C+L03	TC	INTPRET
		VLOAD
# Page 518
			HIUNITZ
		STORE	SCAXIS		# TRACK AXIS UNIT VECTOR
R61LEM1		RTB	DAD
			LOADTIME	# EXTRAPOLATE FORWARD TO CENTER
			3SECONDS	# SIX SECOND PERIOD.
		STCALL	TDEC1
			LPS20.1		# LOS DETERMINATION + VEH ATTITUDE
		VLOAD
			RRTARGET
		STORE	POINTVSM
		RTB	CALL		# GET DESIRED CDU'S FOR VECPNT1
			READCDUD
			VECPNT1		# COMPUTES FINAL ANGLES FROM PRESENT CDUDS
		STORE	CPHI		# STORE FINAL ANGLES -- CPHI, CTHETA, CPSI
		EXIT
		TC	PHASCHNG
		OCT	04022
		CAF	TRACKBIT	# IS TRACK FLAG SET
		MASK	FLAGWRD1
		EXTEND
		BZF	R65WAIT
		TC	BANKCALL
		CADR	G+N,AUTO	# CHECK FOR AUTO MODE
		CCS	A
		TC	R61C+L04	# NOT IN AUTO
		TC	INTPRET
		VLOAD	CALL
			RRTARGET
			CDU*SMNB
		DLOAD	DSU		# GET PHI -- ARCCOS OF Z-COMPONENT OF LOS
			MPAC +5
			COS15DEG
R61LEM2		BMN	EXIT		# BRANCH -- PHI > 15 DEGREES
			R61C+L05	# PHI GRE 10DEG
		EBANK=	CDUXD
		CAF	EBANK6
		TS	EBANK
		INHINT
		EXTEND
		DCA	CPHI
		DXCH	CDUXD
		CA	CPSI
		TS	CDUZD
		RELINT
		EBANK=	LOSCOUNT
		CAF	EBANK7
		TS	EBANK
		TC	R61C+L06
R61C+L05	EXIT
		INHINT
# Page 519
		TC	IBNKCALL
		FCADR	ZATTEROR
		TC	IBNKCALL
		FCADR	SETMINDB	# REDUCE ATTITUDE ERROR
		TC	DOWNFLAG
		ADRES	3AXISFLG
		TC	UPFLAG
		ADRES	PDSPFLAG	# SET PRIORITY DISPLAY FLAG
		TC	BANKCALL
		CADR	R60LEM
		INHINT
		TC	IBNKCALL
		FCADR	RESTORDB
		TC	PHASCHNG
		OCT	04022
		TC	DOWNFLAG
		ADRES	PDSPFLAG	# RESET PRIORITY DISPLAY FLAG
R61C+L06	CA	FLAGWRD1
		MASK	R61FLBIT
		CCS	A
		TC	R61C+L4
		CCS	R65CNTR
		TC	+2
		TC	R61C+L4		# R65CNTR = 0 - EXIT ROUTINE
		TS	R65CNTR
		CAF	06SEC
		TC	TWIDDLE
		ADRES	R61C+L2
		TC	ENDOFJOB
R61C+L2		CAF	PRIO26
		TC	FINDVAC
		EBANK=	LOSCOUNT
		2CADR	R61C+L01

		TC	TASKOVER
R61C+L04	TC	BANKCALL	# TO CONVERT ANGLES TO FDAI
		CADR	BALLANGS
		TC	R61C+L06
R61C+L4		CAE	GENRET
		TCF	BANKJUMP	# EXIT R61
R61C+L1		CAF	BIT7+9PV	# IS RENDEZVOUS OR P25FLAG SET
		MASK	STATE
		EXTEND
		BZF	ENDOFJOB	# NO -- EXIT ROUTINE AND PROGRAM.
		TC	R61C+L06	# YES EXIT ROUTINE
R65WAIT		TC	POSTJUMP
		CADR	P20LEMWT

BIT7+9PV	OCT	00500
# Page 520
COS15DEG	2DEC	0.96593 B-1

06SEC		DEC	600
PHI		EQUALS	20D
READCDUD	INHINT			# READS DESIRED CDU'S AND STORES IN
		CAF	EBANK6		# MPAC TP EXITS WITH MODE SET TO TP
		XCH	EBANK
		TS	RUPTREG1
		EBANK=	CDUXD
		CA	CDUXD
		TS	MPAC
		EXTEND
		DCA	CDUYD
		DXCH	MPAC +1
		CA	RUPTREG1
		TS	EBANK
		RELINT
		TCF	TMODE
		BLOCK	02
		SETLOC	RADARFF
		BANK

		EBANK=	LOSCOUNT
		COUNT*	$$/RRSUB

# Page 521
# THE FOLLOWING SUBROUTINE RETURNS TO CALLER +2 IF THE ABSOLUTE VALUE OF VALUE OF C(A) IS GREATER THAN THE
# NEGATIVE OF THE NUMBER AT CALLER +1.  OTHERWISE IT RETURNS TO CALLER +3.  MAY BE CALLED IN RUPT OR UNDER EXEC.

MAGSUB		EXTEND
		BZMF	+2
		TCF	+2
		COM

		INDEX	Q
		AD	0
		EXTEND
		BZMF	Q+2		# ABS(A) <= CONST GO TO L+3
		TCF	Q+1		# ABS(A) > CONST GO TO L+2

# Page 522
# PROGRAM NAME:	RRLIMCHK
#
# FUNCTIONAL DESCRIPTION:
#
#	RRLIMCHK CHECKS RR DESIRED GIMBAL ANGLES TO SEE IF THEY ARE WITHIN
# 	THE LIMITS OF THE CURRENT MODE.  INITIALLY THE DESIRED TRUNNION AND
#	SHAFT ANGLES ARE STORED IN ITEMP1 AND ITEMP2.  THE CURRENT RR
# 	ANTENNAE MODE (RADMODES BIT 12) IS CHECKED WHICH IS = 0 FOR
#	MODE 1 AND =1 FOR MODE 2.
#
#	MODE 1 -- THE TRUNNION ANGLE IS CHECKED AT MAGSUB TO SEE IF IT IS
#	BETWEEN -55 AND +55 DEGREES.  IF NOT, RETURN TO L +2.  IF WITHIN LIMITS,
#	THE SHAFT ANGLE IS CHECKED TO SEE IF IT IS BETWEEN -70 AND +59 DEGREES.
#	IF NOT, RETURN TO L +2.  IF IN LIMITS, RETURN TO L +3.
#
#	MODE 2 -- THE SHAFT ANGLE IS CHECKED AT MAGSUB TO SEE IF IT IS
#	BETWEEN -139 AND -25 DEGREES.  IF NOT, RETURN TO L +2.  IF WITHIN
#	LIMITS, THE TRUNNION ANGLE IS CHECKED TO SEE IF IT IS BETWEEN +125
# 	AND -125 (+235) DEGREES.  IF NOT, RETURN TO L +2.  IF IN LIMITS, RETURN
#	TO L +3.
#
# CALLING SEQUENCE:
#
#	L  TC  RLIMCHK (WITH INTERRUPT INHIBITED)
#	L  +1  ADRES  T,S  (DESIRED TRUNNION ANGLE ADDRESS)
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	RADMODES, MODEA, MODEB (OR DESIRED TRUNNION AND SHAFT
#	ANGLES ELSEWHERE IN CONSECUTIVE LOCATIONS -- UNSWITCHED ERASABLE OR
#	CURRENT EBANK).
#
# SUBROUTINES CALLED:	MAGSUB
#
# JOBS OR TASKS INITIATED:  NONE
#
# ALARMS:  NONE
#
# EXIT:		L + 2	(EITHER OR BOTH ANGLES NOT WITHIN LIMITS OF CURRENT MODE)
#		L + 3	(BOTH ANGLES WITHIN LIMITS OF CURRENT MODE)

RRLIMCHK	EXTEND
		INDEX	Q
		INDEX	0
		DCA	0
		INCR	Q
		DXCH	ITEMP1
		LXCH	Q		# L(CALLER +2) TO L.

		CAF	ANTENBIT	# SEE WHICH MODE RR IS IN.
		MASK	RADMODES
		CCS	A
		TCF	MODE2CHK

		CA	ITEMP1		# MODE 1 IS DEFINED AS
# Page 523
		TC	MAGSUB		# 	1. ABS(T) L 55 DEGS.
		DEC	-.30555		# 	2. ABS(S + 5.5 DEGS) L 64.5 DEGS
		TC	L		#		(SHAFT LIMITS AT +59, -70 DEGS)

		CAF	5.5DEGS
		AD	ITEMP2
		TC	MAGSUB
		DEC	-.35833		# 64.5 DEGS
		TC	L
		TC	RRLIMOK		# IN LIMITS.

MODE2CHK	CAF	82DEGS		# MODE 2 IS DEFINED AS
		AD	ITEMP2		#	1. ABS(T) G 125 DEGS.
		TC	MAGSUB		#	2. ABS(S + 82 DEGS) L 57 DEGS
		DEC	-.31667		#		(SHAFT LIMITS AT -25, -139 DEGS)
		TC	L

		CA	ITEMP1
		TC	MAGSUB
		DEC	-.69444		# 125 DEGS

RRLIMOK		INDEX	L
		TC	L		# ( = TC 1 )

5.5DEGS		DEC	.03056
82DEGS		DEC	.45556

# Page 524
# PROGRAM NAME:	SETTRKF
#
# FUNCTIONAL DESCRIPTION:
#
# 	SETTRKF UPDATES THE TRACKER FAIL LAMP ON THE DSKY.
#	INITIALLY THE LAMP TEST FLAG (IMODES33 BIT 1) IS CHECKED.
# 	IF A LAMP TEST IS IN PROGRESS, THE PROGRAM EXITS TO L +1.
#	IF NO LAMP TEST THE FOLLOWING IS CHECKED SEQUENTIALLY:
#		1) RR CDU'S BEING ZEROED, RR CDU OK, AND RR NOT IN
#		   AUTO MODE (RADMODES BITS 13, 7, 2).
#		2) LR VEL DATA FAIL AND NO LR POS DATA (RADMODES BITS
#		   8,5)
#		3) NO RR DATA (RADMODES BIT 4)
#	THE ABSENCE OF ALL THREE SIMULTANEOUSLY IN (1), THE PRESENCE OF BOTH
#	IN (2), AND THE PRESENCE OF (3) RESULTS IN EITHER THE TRACKER FAIL
#	LAMP (DSPTAB +11D BIT 8) BEING TURNED OFF OR IS LEFT OFF.  THEREFORE, THE
#	TRACKER FAIL LAMP IS TURN ON IF:
#		A) RR CDU FAILED WITH RR IN AUTO MODE AND RR CDU'S NOT BEING ZEROED
#		B) N SAMPLES OF LR DATA COULD NOT BE TAKEN IN 2N TRIES WITH
#		   EITHER THE ALT OR VEL INFORMATION
#		C) N SAMPLES OF RR DATA COULD NOT BE OBTAINED FROM 2N TRIES
#		   WITH EITHER THE AL
#
# CALLING SEQUENCE:
#
#	L	TC	SETTRKF
#
# ERASABLE INITIALIZATION REQUIRED:  IMODES33, RADMODES, DSPTAB +11D
#
# SUBROUTINES CALLED:  NONE
#
# JOBS OR TASKS INITIATED:  NONE
#
# ALARMS:  TRACKER FAIL LAMP
#
# EXIT:  L +1 (ALWAYS)

SETTRKF		CAF	BIT1		# NO ACTION IF DURING LAMP TEST
		MASK	IMODES33
		CCS	A
		TC	Q

RRTRKF		CA	BIT8
		TS	L

		CAF	13,7,2		# SEE IF CDU FAILED.
		MASK	RADMODES
		EXTEND
		BZF	TRKFLON		# CONDITION 3 ABOVE.

RRCHECK		CAF	RRDATABT	# SEE IF RR DATA FAILED.
		MASK	RADMODES
# Page 525
		CCS	A
TRKFLON		CA	L
		AD	DSPTAB +11D	# HALF ADD DESIRED AND PRESENT STATES.
		MASK	L
		EXTEND
		BZF	TCQ		# NO CHANGE.

FLIP		CA	DSPTAB +11D	# CAN'T USE LXCH DSPTAB +11D (RESTART PROB)
		EXTEND
		RXOR	LCHAN
		MASK	POSMAX
		AD	BIT15
		TS	DSPTAB +11D
		TC	Q

13,7,2		OCT	10102
ENDRMODF	EQUALS

# Page 526
# PROGRAM NAME:  RRTURNON
#
# FUNCTIONAL DESCRIPTION:
#
#	RRTURNON IS THE TURN-ON SEQUENCE WHICH, ALONG WTIH
#	RRZEROSB, ZEROES THE CDU'S AND DETERMINES THE RR MODE.
#	INITIALLY, CONTROL IS TRANSFERRED TO RRZEROSB FOR THE
#	ACTUAL TURN-ON SEQUENCE.  UPON RETURN THE PROGRAM
#	WAITS 1 SECOND BEFORE REMOVING THE TURN-ON FLAG
#	(RADMODES BIT1) SO THE REPOSITION ROUTINE WON'T
#	INITIATE PROGRAM ALARM 00501.  A CHECK IS THEN MADE
#	TO SEE IF A PROGRAM IS USING THE RR (STATE BIT 7).  IF
#	SO, THE PROGRAM EXITS TO ENDRADAR SO THAT THE RR CDU
#	FAIL FLAG (RADMODES BIT 7) CAN BE CHECKED BEFORE
#	RETURNING TO THE WAITING PROGRAM.  IF NOT, THE PROGRAM EXITS
#	TO TASKOVER.
#
# CALLING SEQUENCE:  WAITLIST TASK FROM RRAUTCHK IF THE RR POWER-ON AUTO
# BIT (CHAN 33 BIT 2) CHANGES TO 0 AND NO PROGRAM WAS USING
# THE RR (STATE BIT 7).
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	RADMODES, STATE
#
# SUBROUTINES CALLED:  RRZEROSB, FIXDELAY, TASKOVER, ENDRADAR
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  NONE (SEE RRZEROSB)
#
# EXIT:  TASKOVER, ENDRADAR (WAITING PROGRAM)

		BANK	24
		SETLOC	P20S1
		BANK

		EBANK=	LOSCOUNT
		COUNT*	$$/RSUB
RRTURNON	TC	RRZEROSB
		TC	FIXDELAY	# WAIT 1 SEC BEFORE REMOVING TURN ON FLAG
		DEC	100		# SO A MONITOR REPOSITION WON'T ALARM.
		CS	TURNONBT
		MASK	RADMODES
		TS	RADMODES
		TCF	TASKOVER
# Page 527
# PROGRAM NAME:  RRZEROSB
#
# FUNCTIONAL DESCRIPTION:
#
#	RRZEROSB IS A CLOSED SUBROUTINE TO ZERO THE RR CDU'S,
#	DETERMINE THE RR MODE, AND TURN ON THE TRACKER FAIL
#	LAMP IF REQUIRED.  INITIALLY THE RR CDU ZERO BIT (CHAN 12
#	BIT 1) IS SET.  FOLLOWING A 20 MILLISECOND WAIT, THE LGC
#	RR CDU COUNTERS (OPTY, OPTX) ARE SET = 0 AFTER
# 	WHICH THE RR CDU ZERO DISCRETE (CHAN 12 BIT 1) IS
#	REMOVED.  A 4 SECOND WAIT IS SET TO ALL THE RR CDU'S
#	TO REPEAT THE ACTUAL TRUNNION AND SHAFT ANGLES.  THE
#	RR CDU ZERO FLAG (RADMODES BIT 13) IS REMOVED.  THE
#	CONTENTS OF OPTY IS THEN CHECKED TO SEE IF THE TRUNNION
#	ANGLE IS LESS THAN 90 DEGREES.  IF NOT, BIT 12 OF
#	RADMODES IS SET = 1 TO INDICATE RR ANTENNA MODE 2.
#	IF LESS THAN 90 DEGREES, BIT 12 OF RADMODES IS SET = 0 TO
#	INDICATE RR ANTENNA MODE 1.  SETTRKF IS THEN CALLED TO
#	SEE IF THE TRACKER FAIL LAMP SHOULD BE TURNED ON.
#
# CALLING SEQUENCE:  L  TC  RRZEROSB  (FROM RRTURNON AND RRZERO)
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	RADMODES (BIT 13 SET), DSPTAB +11D
#
# SUBROUTINES CALLED:  FIXDELAY, MAGSUB, SETTRKF
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  TRAKCER FAIL
#
# EXIT:  L +1 (ALWAYS)

RRZEROSB	EXTEND
		QXCH	RRRET
		CAF	BIT1		# BIT 13 OF RADMODES MUST BE SET BEFORE
		EXTEND			# COMING HERE.
		WOR	CHAN12		# TURN ON ZERO RR CDU
		TC	FIXDELAY
		DEC	2

		CAF	ZERO
		TS	CDUT
		TS	CDUS
		CS	ONE		# REMOVE ZEROING BIT.
		EXTEND
		WAND	CHAN12
		TC	FIXDELAY
		DEC	1000		# RESET FAIL INHIBIT IN 10 SECS. -- D.281

		CS	RCDU0BIT	# REMOVE ZEROING IN PROCESS BIT
# Page 528
		MASK	RADMODES
		TS	RADMODES

		CA	CDUT
		TC	MAGSUB
		DEC	-.5
		TCF	+3		# IF MODE 2.

		CAF	ZERO
		TCF	+2
		CAF	ANTENBIT
		XCH	RADMODES
		MASK	-BIT12
		ADS	RADMODES

		TC	SETTRKF		# TRACKER LAMP MIGHT GO ON NOW.

		TC	RRRET		# DONE.

-BIT12		EQUALS	-1/8		# IN SPROOT

# Page 529
# PROGRAM NAME:  DORREPOS
#
# FUNCTIONAL DESCRIPTION:
#
#	DORREPOS IS A SEQUENCE OF TASKS TO DRIVE THE RENDEZVOUS RADAR
#	TO A SAFE POSITION.  INIITALLY SETRRECR IS CALLED WHERE THE RR
#	ERROR COUNTERS (CHAN 12 BIT 2) ARE ENABLED AND LASTYCMD
#	AND LASTXCMD SET = 0 TO INDICATE THE DIFFERENCE BETWEEN THE
#	DESIRED STATE AND PRESENT STATE OF THE COMMANDS.  THE RR
#	TURN-ON FLAG (RADMODES BIT 1) IS CHECKED AND IF NOT PRESENT,
#	PROGRAM ALARM 00501 IS REQUESTED BEFORE CONTINUING.  IN EITHER
#	CASE, FOLLOWING A 20 MILLISECOND WAIT THE PROGRAM CHECKS THE CURRENT
#	RR ANTENNA MODE (RADMODES BIT 12).  RRTONLY IS THEN CALLED
#	TO DRIVE THE TRUNNION ANGLE TO 0 DEGREES IF IN MODE 1 AND TO 180
#	DEGREES IF IN MODE 2.  UPON RETURN, THE CURRENT RR ANTENNA
#	MODE (RADMODES BIT 12) IS AGAIN CHECKED.  RRSONLY IS THEN
#	CALLED TO DRIVE THE SHAFT ANGLE TO 0 DEGREES IF IN MODE 1 AND TO
#	-90 DEGREES IF IN MODE 2.  IF DURING RRTONLY OR RRSONLY A
#	REMODE HAS BEEN REQUESTED (RADMODES BIT 14), AND ALWAYS
#	FOLLOWING COMPLETION OF RRSONLY, CONTROL IS TRANFERRED TO
#	REPOSRPT.  HERE THE REPOSITION FLAG (RADMODES BIT 11) IS
#	REMOVED.  A CHECK IS THEN MADE ON THE DESIGNATE FLAG (RADMODES
#	BIT 10).  IF PRESENT, CONTROL IS TRANSFERRED TO BEGDES.  IF NOT PRESENT
#	INDICATING NO FURTHER ANTENNA CONTROL REQUIRED, THE RR ERROR
#	COUNTER BIT (CHAN 12 BIT 2) IS REMOVED AND THE ROUTINE EXITS TO
#	TASKOVER.
#
# CALLING SEQUENCE:
#
#	WAITLIST CALL FROM RRGIMON IF TRUNNION AND SHAFT CDU ANGLES
#	NOT WITHIN LIMITS OF CURRENT MODE.
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	RADMODES
#
# SUBROUTINES CALLED
#
#	RRTONLY, RRSONLY, BEGDES (EXIT)
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  NONE
#
# EXIT:  TASKOVER, BEGDES

DORREPOS	TC	SETRRECR	# SET UP RR CDU ERROR COUNTERS.

# ALARM 501 DELETED IN DANCE 279 PER PCR 97.

		TC	FIXDELAY
		DEC	2

		CAF	ANTENBIT	# MANEUVER TRUNNION ANGLE TO NOMINAL POS.
# Page 530
		MASK RADMODES
		CCS	A
		CAF	BIT15		# 0 FOR MODE 1 AND 180 FOR MODE 2.
		TC	RRTONLY

		CAF	ANTENBIT	# NOT PUT SHAFT IN RIGHT POSITION
		MASK	RADMODES
		CCS	A
		CS	HALF		# -90 FOR MODE 2.
		TC	RRSONLY

REPOSRPT	CS	REPOSBIT	# RETURNS HERE FROM RR1AXIS IN REMODE
					# REQUESTED DURING REPOSITION.
		MASK	RADMODES	# REMOVE REPOSITION BIT.
		TS	RADMODES
		MASK	DESIGBIT	# SEE IF SOMEONE IS WAITING TO DESIGNATE.
		CCS	A
		TCF	BEGDES
		CS	BIT2		# IF NO FURTHER ANTENNA CONTROL REQUIRED,
		EXTEND			# REMOVE ERROR COUNTER ENABLE.
		WAND	CHAN12
		TCF	TASKOVER

SETRRECR	CAF	BIT2		# SET UP RR ERROR COUNTERS
		EXTEND
		RAND	CHAN12
		CCS	A		# DO NOT CLEAR LAST COMMAND IF
		TC	Q		# ERROR COUNTERS ARE ENABLED

		TS	LASTYCMD
		TS	LASTXCMD
		CAF	BIT2
		EXTEND
		WOR	CHAN12		# ENABLE RR CDU ERROR COUNTERS.
		TC	Q
# Page 531
# PROGRAM NAME:  REMODE
#
# FUNCTIONAL DESCRIPTION
#
#	REMODE IS THE GENERAL REMODING SUBROUTINE.  IT DRIVES THE
#	TRUNNION ANGLE TO 0 DEGREES IF THE CURRENT MODE IS MODE 1,
#	180 DEGREES FOR MODE 2, THEN DRIVES THE SHAFT ANGLE TO -45
#	DEGREES, AND FINALLY DRIVES THE TRUNNION ANGLE TO -130 DEGREES,
#	TO PLACE THE RR IN MODE 2, -50 DEGREES FOR MODE 1, BEFORE
#	INITIATING 2-AXIS CONTROL.  ALL REMODING IS DONE WITH SINGLE
#	AXIS ROTATIONS (RR1AXIS).  INITIALLY THE RR ANTENNA MODE FLAG
#	(RADMODES BIT 12) IS CHECKED.  CONTROL IS THEN TRANSFERRED TO
#	RRTONLY TO DRIVE THR TRUNNION ANGLE TO 0 DEGREES IF IN MODE 1
#	OR 180 DEGREES IF IN MODE 2.  RRSONLY IS THEN CALLED TO DRIVE
#	THE SHAFT ANGLE TO -45 DEGREES. THE RR ANTENNA MODE FLAG
#	(RADMODES BIT 12) IS CHECKED AGAIN.  CONTROL IS AGAIN
#	TRANSFERRED TO RRTONLY TO DRIVE THE TRUNNION ANGLE TO -130
#	DEGREES TO PLACE THE RR IN MODE 2 IF CURRENTLY IN MODE 1 OR TO
#	-50 DEGREES IF IN MODE 2 TO PLACE THE RR IN MODE 1.  RMODINV
#	IS THEN CALLED TO SET RADMODES BIT 12 TO INDICATE THE NEW
#	RR ANTENNA MODE.  THE REMODE FLAG (RADMODES BIT 14)
#	IS REMOVED TO INDICATE THAT REMODING IS COMPLETE.  THE PROGRAM
#	THEN EXITS TO STDESIG TO BEGIN 2-AXIS CONTROL.
#
# CALLIN SEQUENCE:
#
#	FROM BEGDES WHEN REMODE FLAG (RADMODES BIT 14) IS SET.
#	THIS FLAG MAY BE SET IN RRDESSM AND RRDESNB IF RRLIMCHK
#	DETERMINES THAT THE DESIRED ANGLES ARE WITHIN THE LIMITS OF THE
#	OTHER MODE.
#
# ERASABLE INIITIALIZATION REQUIRED:
#
#	RADMODES
#
# SUBROUTINES CALLED:
#
#	RRTONLY, RRSONL, RMODINV (ACTUALLY PART OF)
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  NONE
#
# EXIT:  STDESIG

REMODE		CAF	ANTENBIT	# DRIVE TRUNNION TO 0 (180)
		MASK	RADMODES	# (ERROR COUNTER ALREADY ENABLED)
		CCS	A
		CAF	BIT15
		TC	RRTONLY

		CAF	-45DEGSR
		TC	RRSONLY
# Page 532
		CS	RADMODES
		MASK	ANTENBIT
		CCS	A
		CAF	-80DEGSR	# GO TO T = -130 (-50).
		AD	-50DEGSR
		TC	RRTONLY

		CS	RADMODES
		MASK	ANTENBIT
		CCS	A
		CAF	BIT15		# GO TO T = -180 (+0).
		TC	RRTONLY

		CS	RADMODES 	# GO TO S = -90 (+0).
		MASK	ANTENBIT
		CCS	A
		CS	HALF
		TC	RRSONLY

		TC	RMODINV

		CS	REMODBIT	# END OF REMODE.
		MASK	RADMODES
		TS	RADMODES

		CAF	DESIGBIT	# WAS REMODE CALLED DURING DESIGNATE?
		MASK	RADMODES	# (BIT10 RADMODES = 1)
		EXTEND
		BZF	RGOODEND	# NO -- RETURN TO CALLER WAITING IN RADSTALL
		TC	STDESIG		# YES -- RETURN TO DESIGNATE
-45DEGSR	=	13,14,15
-50DEGSR	DEC	-.27778
-80DEGSR	DEC	-.44444

RMODINV		LXCH	RADMODES	# INVERT THE MODE STATUS.
		CAF	ANTENBIT
		EXTEND
		RXOR	LCHAN
		TS	RADMODES
		TC	Q

# Page 533
# PROGRAM NAMES:	RRTONLY, RRSONLY
#
# FUNCTIONAL DESCRIPTION:
#
# 	RRTONLY AND RRSONLY ARE SUBROUTINES FOR DOING SINGLE AXIS
#	RR MANEUVERS FOR REMODE AND REPOSITION.  IT DRIVES TO
#	WITHIN 1 DEGREE.  INITIALLY, AT RR1AX2, THE REMODE AND REPOSITION
#	FLAGS (RADMODES BITS 14, 11) ARE CHECKED.  IF BOTH EXIST,
#	THE PROGRAM EXITS TO REPOSRPT (SEE DORREPOS).  THIS INDICATES
#	THAT SOMEONE POSSIBLY REQUESTED A DESIGNATE (RADMODES BIT 10)
#	WHICH REQUIRES A REMODE (RADMODES BIT 14) AND THAT A
#	REPOSITION IS IN PROGRESS (RADMODES BIT 11).  IF NONE
# 	OR ONLY ONE OF THE FLAGS EXIST, REMODE OR REPOSITION, MAGSUB
#	IS CALLED TO SEE IF THE APPROPRIATE ANGLE IS WITHIN 1 DEGREE.  IF YES,
#	CONTROL RETURNS TO THE CALLING ROUTINE.  IF NOT, CONTROL IS
#	TRANSFERRED TO RROUT FOR SINGLE AXIS MANEUVERS WITH THE OTHER
#	ANGLE SET = 0.  FOLLOWING A .5 SECOND WAIT, THE ABOVE PROCEDURE IS
#	REPEATED.
#
# CALLING SEQUENCE:	L-1	CAF	*ANGLE*		(DESIRED ANGLE SCALED PI)
#			L	TC	RRTONLY		(TRUNNION ONLY)
#			RRSONLY				(SHAFT ONLY)
#			RRTONLY IS CALLED BY PREPOS29;
#			RRTONLY AND RRSONLY ARE CALLED BY DORREPOS AND REMODE
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	C(A) = DESIRED ANGLE, RADMODES
#
# SUBROUTINES CALLED:
#
#	FIXDELAY, REPOSRPT, MAGSUB, RROUT
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  NONE
#
# EXIT:	REPOSRPT (REMODE AND REPOSITION FLAGS PRESENT -- RADMODES
#	BITS 14, 11)
#	L+1 (ANGLE WITHIN ONE DEGREE OR RR OUT OF AUTO MODE)

RRTONLY		TS	RDES		# DESIRED TRUNNION ANGLE.
		CAF	ZERO
		TCF	RR1AXIS

RRSONLY		TS	RDES		# SHAFT COMMANDS ARE UNRESOLVED SINCE THIS
		CAF	ONE		# ROUTINE ENTERED ONLY WHEN T = 0 OR 180.

RR1AXIS		TS	RRINDEX
		EXTEND
		QXCH	RRRET
		TCF	RR1AX2

# Page 534
NXTRR1AX	TC	FIXDELAY
		DEC	50		# 2 SAMPLES PER SECOND.

RR1AX2		CS	RADMODES	# IF SOMEONE REQUESTS A DESIGNATE WHICH
		MASK	PRIO22		# REQUIRES A REMODE AND A REPOSITION IS IN
		EXTEND			# PROGRESS, INTERRUPT IT AND START THE
		BZF	REPOSRPT	# REMODE IMMEDIATELY.

		CA	RDES
		EXTEND
		INDEX	RRINDEX
		MSU	CDUT
		TS	ITEMP1		# SAVE ERROR SIGNAL.
		EXTEND
		MP	RRSPGAIN	# TRIES TO NULL .7 OF ERROR OVER NEXT .5
		TS	L
		CA	RADMODES
		MASK	AUTOMBIT
		XCH	ITEMP1		# STORE RR-OUT-OF-AUTO-MODE BIT.
		TC	MAGSUB		# SEE IF WITHIN ONE DEGREE.
		DEC	-.00555		# SCALED IN HALF-REVS.

		CCS	ITEMP1		# NO.  IF RR OUT OF AUTO MODE, EXIT.
		TC	RRRET		# RETURN TO CALLER.

		CCS	RRINDEX		# COMMAND FOR OTHER AXIS IS ZERO.
		TCF	+2		# SETTING A TO 0.
		XCH	L
		DXCH	TANG

		TC	RROUT

		TCF	NXTRR1AX	# COME BACK IN .5 SECONDS.

RRSPGAIN	DEC	.59062		# NULL .7 ERROR IN .5 SEC.

# Page 535
# PROGRAM NAME:  RROUT
#
# FUNCTIONAL DESCRIPTION:
#
#	RROUT RECEIVES RR GYRO COMMANDS IN TANG, TANG +1 IN RR
#	ERROR COUNTER SCALING.  RROUT THEN LIMITS THEM AND
#	GENERATES COMMANDS TO THE CDU TO ADJUST THE ERROR COUNTERS
#	TO THE DESIRED VALUES.  INITIALLY MAGSUB CHECKS THE MAGNITUDE OF
#	THE COMMAND (SHAFT ON 1ST PASS) TO SEE IF IT IS GREATER THAN
#	384 PULSES.  IF NOT, CONTROL IS TRANFERRED TO RROUTLIM TO
#	LIMIT THE COMMAND TO +384 OR -384 PULSES.  THE DIFFERENCE IS
#	THEN CALCULATED BETWEEN THE DESIRED STATE AND TEH PRESENT STATE OF
#	THE ERROR COUNTER AS RECORDED IN LASTYCMD AND LASTXCMD.
#	THE RESULT IS STORED IN OPTXCMD (1ST PASS) AND OPTYCMD (2ND
#	PASS).  FOLLOWING THE SECOND PASS, FOR THE TRUNNION COMMAND, THE
#	OCDUT AND OCDUS ERROR COUNTER DRIVE BITS (CHAN 14 BITS 12, 11)
#	ARE SET.  THIS PROGRAM THEN EXITS TO THE CALLING PROGRAM.
#
# CALLING SEQUENCE:
#
#	L TC RROUT (WITH RUPT INHIBITED) RROUT IS CALLED BY
#	RRTONLY, RRSONLY, AND DODES
#
# ERASABLE INITIALIZATION REQURIED:
#
#	TANG, TANG +1 (DESIRED COMMANDS), LASTYCMD, LASTXCMD
#	(1ST PASS = 0), RR ERROR COUNTER ENAGLE SET (CHAN 12 BIT 2).
#
# SUBROUTINES CALLED:
#
#	MAGSUB
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  NONE
#
# EXIT:  L+1 (ALWAYS)

RROUT		LXCH	Q		# SAVE RETURN
		CAF	ONE		# LOOP TWICE.
RROUT2		TS	ITEMP2
		INDEX	A
		CA	TANG
		TS	ITEMP1		# SAVE SIGN COMMAND FOR LIMITING.

		TC	MAGSUB		# SEE IF WITHIN LIMITS.
-RRLIMIT	DEC	-384
		TCF	RROUTLIM	# LIMIT COMMAND TO MAG OF 384.

SETRRCTR	CA	ITEMP1		# COUNT OUT DIFFERENCE BETWEEN DESIRED
		INDEX	ITEMP2		# STATE AND PRESENT STATE AS RECORDED IN
		XCH	LASTYCMD	# LASTYCMD AND LASTXCMD
		COM
# Page 536
		AD	ITEMP1
		AD	NEG0		# PREVENT +0 IN OUTCOUNTER
		INDEX	ITEMP2
		TS	CDUTCMD

		CCS	ITEMP2		# PROCESS BOTH INPUTS.
		TCF	RROUT2

		CAF	PRIO6		# ENABLE COUNTERS.
		EXTEND
		WOR	CHAN14		# PUT ON CDU DRIVES S AND T
		TC	L		# RETURN.

RROUTLIM	CCS	ITEMP1		# LIMIT COMMAND TO ABS VAL OF 384.
		CS	-RRLIMIT
		TCF	+2
		CA	-RRLIMIT
		TS	ITEMP1
		TCF	SETRRCTR +1

# Page 537
# ROUTINE TO ZERO THE RR CDUS AND DETERMINE THE ANTENNA MODE.

RRZERO		CAF	BIT11+1		# SEE IF MONITOR REPOSITION OR NOT IN AUTO
		MASK	RADMODES	# IF SO, DON'T RE-ZERO CDUS.
		CCS	A
		TCF	RADNOOP		# (IMMEDIATE TASK TO RGOODEND).

		INHINT
		CS	RCDU0BIT	# SET FLAG TO SHOW ZEROING IN PROGRESS.
		MASK	RADMODES
		AD	RCDU0BIT
		TS	RADMODES

		CAF	ONE
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	RRZ2

		CS	RADMODES	# SEE IF IN AUTO MODE.
		MASK	AUTOMBIT
		CCS	A
		TCF	ROADBACK
		TC	ALARM		# AUTO DISCRETE NOT PRESENT -- TRYING
		OCT	510
ROADBACK	RELINT
		TCF	SWRETURN

RRZ2		TC	RRZEROSB	# COMMON TO TURNON AND RRZERO.
		TCF	ENDRADAR

BIT11+1		OCT	02001

# Page 538
# PROGRAM NAME:  RRDESSM
#
# FUNCTIONAL DESCRIPTION:
#
# 	THIS INTERPRETIVE ROUTINE WILL DESIGNATE, IF DESIRED ANGLES ARE
#	WITHIN THE LIMITS OF EITHER MODE, TO A LINE-OF-SIGHT (LOS) VECTOR
#	(HALF-UNIT) KNOWN WITH RESPECT TO THE STABLE MEMBER PRESENT
#	ORIENTATION.  INITIALLY THE IMU CDU'S ARE READ AND CONTROL
#	TRANSFERRED TO SMNB TO TRANSFORM THE LOS VECTOR FROM STABLE
#	MEMBER TO NAVIGATION BASE COORDINATES (SEE STG MEMO 699)
#	RRANGLES IS THEN CALLED TO CALCULATE THE RR GIMBAL ANGLES,
#	TRUNNION AND SHAFT, FOR BOT THE PRESENT AND ALTERNATE MODE.
#	RRLIMCHK IS CALLED TO SEE IF THE ANGLES CALCULATED FOR THE
#	PRESENT MODE ARE WITHIN LIMITS.  IF WITHIN LIMITS, THE RETUREN
#	LOCATION IS INCREMENTED, INASMUCH AS NO VEHICLE MANEUVER IS
#	REQUIRED, BEFORE EXITING TO STARTDES.  IF NOT WITHIN THE LIMITS OF THE
#	CURRENT MODE, TRYSWS IS CALLED.  FOLLOWING INVERTING OF THE RR
#	ANTENNA MODE FLAG (RADMODES BIT 12), RRLIMCHK IS CALLED
#	TO SEE IF THE ANGLES CALCULATED FOR THE ALTERNATE MODE ARE WITHIN
#	LIMITS.  IF YES, THE RR ANTENNA MODE FLAG IS AGAIN INVERTED,
#	THE REMODE FLAG (RADMODES BIT 14) SET, AND THE RETURN LOCATION
#	INCREMENTED, TO INDICATE NO VEHICLE MANEUVER IS REQUIRED, BEFORE
#	EXITING TO STARTDES.  IF THESE ANGLES ARE NOT WITHIN LIMITS
#	OF THE ALTERNATE MODE, THE RR ANTENNA MODE FLAG (RADMODES
#	BIT 12) IS INVERTED BEFORE RETURNING DIRECTLY TO THE CALLING PROGRAM
# 	TO INDICATE THAT A VEHICLE MANEUVER IS REQUIRED.
#
# CALLING SEQUENCE:
#
#	L	STCALL	RRTARGET	(LOS HALF-UNIT VECTOR IN SM COORDINATES)
#	L+1	RRDESM
#	L+2	BASIC			(VEHICLE MANEUVER REQUIRED)
#	L+3	BASIC			(NO VEHICLE MANEUVER REQUIRED)
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	RRTARGET, RADMODES
#
# SUBROUTINES CALLED:
#
#	READCDUS, SMNB, RRANGLES, RRLIMCHK, TRYSWS (ACTUALLY
#	PART OF), RMODINV
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  NONE
#
# EXIT:  L+2 (NEITHER SET OF ANGLES ARE WITHIN LIMITS OF RELATED MODE)
# STARTDES (DESIGNATE POSSIBLE AT PRESENT VEHICLES ATTITUDE -- RETURNS
# TO L+3 FROM STARTDES)

RRDESSM		STQ	CLEAR
			DESRET
# Page 539
			RRNBSW
		CALL			# COMPUTES SINES AND COSINES, ORDER Y Z X
			CDUTRIG
		VLOAD	CALL		# LOAD VECTOR AND CALL TRANSFORMATION
			RRTARGET
			*SMNB*

		CALL			# GET RR GIMBAL ANGLES IN PRESENT AND
			RRANGLES	# ALTERNATE MODE.
		EXIT

		INHINT
		TC	RRLIMCHK
		ADRES	MODEA		# CONFIGURATION FOR CURRENT MODE.
		TC	+3		# NOT IN CURRENT MODE
OKDESSM		INCR	DESRET		# INCREMENT SAYS NO VEHICLE MANEUVER REQ.
		TC	STARTDES	# SHOW DESIGNATE REQUIRED
		CS	FLAGWRD8
		MASK	SURFFBIT	# CHECK IF ON LUNAR SURFACE (SURFFLAG=P22F)
		EXTEND
		BZF	NORDSTAL	# BRANCH -- YES -- CANNOT DESIGNATE IN MODE 2
		TC	TRYSWS

LUNDESCH	CS	FLAGWRD8	# OVERFLOW RETURN FROM RRANGLES
		MASK	SURFFBIT	# CHECK IF ON LUNAR SURFACE
		EXTEND
		BZF	NORDSTAL	# BRANCH -- YES -- RETURN TO CALLER -- ALARM 527
		CA	STATE
		MASK	RNDVZBIT
		CCS	A		# TEST RNDVZFLG
		TC	NODESSM		# NOT ON MOON -- CALL FOR ATTITUDE MANEUVER
		TCF	ENDOFJOB	# ... BUT NOT IN R29.

# Page 540
# PROGRAM NAME:  STARTDES
#
# FUNCTIONAL DESCRIPTION:
#
#	STARTDES IS ENTERED WHEN WE ARE READY TO BEGIN DESIGNATION.
#	BIT 14 OF RADMODES IS ALREADY SET IF A REMODE IS REQUIRED.
#	AT THIS TIME, THE RR ANTENNA MAY BE IN A REPOSITON
#	OPERATION.  IN THIS CASE, IF A REMODE IS REQUIRED IT MAY HAVE
#	ALREADY BEGUN BUT IN ANY CASE THE REPOSITION WILL BE INTERRUPTED.
#	OTHERWISE, THE REPOSITION WILL BE COMPLETED BEFORE 2-AXIS
#	DESIGNATION BEGINS.  INITIALLY DESCOUNT IS SET = 60 TO INDICATE
#	THAT 30 SECONDS WILL BE ALLOWED FOR THE RR DATA GOOD INBIT
#	(CHAN 33 BIT 4) IF LOCK-ON IS DESIRED (STATE BIT 5).  BIT 10
#	OF RADMODES IS SET TO SHOW THAT A DESIGNATE IS REQUIRED.
#	THE REPOSITON FLAG (RADMODES BIT 11) IS CHECKED.  IF SET,
#	THE PROGRAM EXITS TO L+3 OF THE CALLING PROGRAM (SEE RRDESSM
#	AND RRDESNB).  THE PROGRAM WILL BEGIN DESIGNATING TO THE DESIRED
#	ANGLES FOLLOWING THE REPOSITON OR REMODE IF ONE WAS
#	REQUESTED.  IF THE REPOSITON FLAG IS NOT SET, SETRRECR IS CALLED
#	WITH SETS THE RR ERROR COUNTER ENABLE BIT (CHAN 12 BIT 2)
# 	AND SETS LASTYCMD AND LASTXCMD = 0 TO INDICATE THE
#	DIFFERENCE BETWEEN THE PRESENT AND DESIRED STATE OF THE ERROR
#	COUNTERS.  A 20 MILLISECOND WAITLIST CALL IS SET FOR BEGDES
#	AFTER WHICH THE PROGRAM EXITS TO L+3 OF TEH CALLING PROGRAM.
#
# CALLING SEQUENCE:
#
#	FROM RRDESSM AND RRDESNB WHEN ANGLES WITHIN LIMITS.
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	RADMODES, (SEE DODES)
#
# SUBROUTINES CALLED
#
#	SETRRECR, WAITLIST
#
# JOBS OR TASKS INITIATED:
#
#	BEGDES
#
# ALARMS:  NONE
#
# EXIT:	L+3 OF CALLING PROGRAM (SEE RRDESSM)
#	L+2 OF CALLING PROGRAM (SEE RRDESNB)

STARTDES	INCR	DESRET
		CS	RADMODES
		MASK	DESIGBIT
		ADS	RADMODES
		MASK	REPOSBIT	# SEE IF REPOSITIONING IN PROGRESS.
		CCS	A
		TCF	DESRETRN	# ECTR ALREADY SET UP.

		TC	SETRRECR	# SET UP ERROR COUNTERS.
# Page 541
		CAF	TWO
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	BEGDES

DESRETRN	CA	RADCADR		# FIRST PASS THRU DESIGNATE
		EXTEND
		BZF	DESRTRN		# YES	SET EXIT
		TC	ENDOFJOB	# NO
DESRTRN		RELINT
		INCR	DESRET
		CA	DESRET
		TCF	BANKJUMP

NORDSTAL	CAF	ZERO		# ZERO RADCADR TO WIPE OUT ANYONE
		TS	RADCADR		# WAITING IN RADSTALL SINCE WE ARE NOW
		TCF	DESRTRN		# RETURNING TO P20 AND MAY DO NEW RADSTALL

# Page 542
# SEE IF RRDESSM CAN BE ACCOMPLISHED AFTER A REMODE.

TRYSWS		TC	RMODINV		# (NOTE RUPT INHIBIT)
		TC	RRLIMCHK	# TRY DIFFERENT MODE.
		ADRES	MODEB
		TCF	NODESSM		# VEHICLE MANEUVER REQUIRED

		TC	RMODINV		# RESET BIT12
		CAF	REMODBIT	# SET FLAG FOR REMODE.
		ADS	RADMODES

		TCF	OKDESSM

NODESSM		TC	RMODINV		# RE-INVERT MODE AND RETURN
		INCR 	DESRET		# TO CALLER +2
		TCF	NORDSTAL

MAXTRYS		DEC	60

# Page 543
# DESIGNATE TO SPECIFIC RR GIMBAL ANGLES (INDEPENDENT OF VEHICLE MOTION).  ENTER WITH DESIRED ANGLES IN
# TANG AND TANG +1.

RRDESNB		TC	MAKECADR
		TS	DESRET

		TC	DOWNFLAG	# RESET FLAG TO PREVENT DODES FROM GOING
		ADRES	LOSCMFLG	# BACK TO R21
		CA	MAXTRYS		# SET TIME LIMIT COUNTER
		TS	DESCOUNT	# FOR DESIGNATE
		INHINT			# SEE IF CURRENT MODE OK.
		TC	RRLIMNB		# DO SPECIAL V41 LIMIT CHECK
		ADRES	TANG
		TCF	TRYSWN		# SEE IF IN OTHER MODE.

OKDESNB		RELINT
		EXTEND
		DCA	TANG
		DXCH	TANGNB
		TC	INTPRET

		CALL			# GET LOS IN NB COORDS.
			RRNB
		STORE	RRTARGET

		SET	EXIT
			RRNBSW

		INHINT
		TCF	STARTDES +1
TRYSWN		TC	RMODINV		# SEE IF OTHER MODE WILL DO.
		TC	RRLIMNB		# DO SPECIAL V41 LIMIT CHECK
		ADRES	TANG
		TCF	NODESNB		# NOT POSSIBLE.

		TC	RMODINV
		CAF	REMODBIT	# CALL FOR REMODE.
		ADS	RADMODES
		TCF	OKDESNB

NODESNB		TC	RMODINV		# REINVERT MODE BIT.
		TC	ALARM		# BAD INPUT ANGLES.
		OCT	502
		TC	CLRADMOD
		TC	ENDOFJOB	# AVOID 503 ALARM.

RRLIMNB		INDEX	Q		# THIS ROUTINE IS IDENTICAL TO RRLIMCHK
		CAF	0		# EXCEPT THAT THE MODE 1 SHAFT LOWER
		INCR	Q		# LIMIT IS -85 INSTEAD OF -70 DEGREES
		EXTEND
# Page 544
		INDEX	A		# READ GIMBAL ANGLES INTO ITEMP STORAGE
		DCA	0
		DXCH	ITEMP1
		LXCH	Q		# L(CALLER +2) TO L

		CAF	ANTENBIT	# SEE WHICH MODE RR IS IN
		MASK	RADMODES
		CCS	A
		TCF	MODE2CHK	# MODE 2 CAN USE RRLIMCHK CODING
		CA	ITEMP1
		TC	MAGSUB		# MODE 1 IS DEFINED AS
		DEC	-.30555		# 1 	ABS(T) L 55 DEGS
		TC	L		# 2 	SHAFT LIMITS AT +59, -85 DEGS

		CA	ITEMP2		# LOAD SHAFT ANGLE
		EXTEND
		BZMF	NEGSHAFT	# IF NEGATIVE SHAFT ANGLE, ADD 20.5 DEGS
		AD	5.5DEGS
SHAFTLIM	TC	MAGSUB
		DEC	-.35833		# 64.5 DEGREES
		TC	L		# NOT IN LIMITS
		TC	RRLIMOK		# IN LIMITS
NEGSHAFT	AD	20.5DEGS	# MAKE NEGATIVE SHAFT LIMIT -85 DEGREES
		TCF	SHAFTLIM

20.5DEGS	DEC	.11389

# Page 545
# PROGRAM NAME:  BEGDES
#
# FUNCTIONAL DESCRIPTION:
#
#	BEGDES CHECKS VARIOUS DESIGNATE REQUESTS AND REQUESTS THE
#	ACTUAL RR DESIGNATION.  INITIALLY A CHECK IS MADE TO SEE IF A
# 	REMODE (RADMODES BIT 14) IS REQUESTED OR IN PROGRESS.  IF SO,
#	CONTROL IS TRANFERRED TO STDESIG AFTER ROUTINE REMODE IS
#	EXECUTED.  IF NO REMODE, STDESIG IS IMMEDIATELY CALLED WHERE
#	FIRST THE REPOSITION FLAG (RADMODES BIT 11) IS CHECKED.  IF
#	PRESENT, THE DESIGNATE FLAG (RADMODES BIT 10) IS REMOVED
#	AFTER WHICH THE PROGRAM EXITS TO RDBADEND.  IF THE REPOSITION
#	FLAG IS NOT PRESET, THE CONTINUOUS DESIGNATE FLAG (RADMODES
#	BIT 15) IS CHECKED.  IF PRESENT, AN EXECUTIVE CALL IS IMMEDIATELY
#	MADE FOR DODES AFTER WHICH A .5 SECOND WAIT IS INITIATED BEFORE
#	REPEATING AT STDESIG.  IF THE RR SEARCH ROUTINE (LRS24.1) IS DESIGNATING
#	TO A NEW POINT (NEWPTFLG SET) THE CURRENT DESIGNATE TASK IS TERMINATED.
#	IF CONTINUOUS DESIGNATE IS NOT WANTED, THE DESIGNATE FLAG (RADMODES
#	BIT 10) IS CHECKED.  IF NOT PRESENT, THE PROGRAM EXITS TO ENDRADAR TO
#	CHECK RR CDU FAIL BEFORE RETURNING TO THE CALLING PROGRAM.  IF DESIGNATE
#	IS STILL REQUIRED, DESCOUNT IS CHECKED TO SEE IF THE 30 SECONDS HAS
#	EXPIRED BEFORE RECEIVING THE RR DATA GOOD (CHAN 33 BIT 4)
#	SIGNAL.  IF OUT OF TIME, PROGRAM ALARM 00503 IS REQUESTED, THE
#	RR AUTO TRACKER ENABLE AND RR ERROR COUNTER ENABLE
#	(CHAN 12 BITS 14,2) BITS REMOVED, AND THE DESIGNATE FLAG
#	(RADMODES BIT 10) REMOVED BEFORE EEXITING TO RDBADEND.  IF
#	TIME HAS NOT EXPIRED, DESCOUNT IS DECREMENTED, THE
#	EXECUTIVE CALL MADE FOR DODES, AND A .5 SECOND WAIT INITIATED
#	BEFORE REPEATING THIS PROCEDURE AT STDESIG.
#
# CALLING SEQUENCE:
#
#	WAITLIST CALL FROM STARTDES
#	TCF BEGDES FROM DORREPOS
#	TC STDESIG RETURNING, FROM REMODE
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	DESCOUNT, FINDVAC
#
# JOBS OR TASKS INITIATED:  DODES
#
# ALARMS:  PROGRAM ALARM 00503 (30 SECONDS HAVE EXPIRED) WITH NO RR DATA
# GOOD (CHAN 33 BIT 4) RECEIVED WHEN LOCK-ON (STATE BIT 5) WAS REQUESTED.
#
# EXIT:  	TASKOVER (SEARCH PATTERN DESIGNATING TO NEW POINT)
# 		ENDRADAR (NO DESIGNATE -- RADMODES BIT 10)
#		RDBADEND (REPOSITION OR 30 SECONDS EXPIRED)

BEGDES		CS	RADMODES
# Page 546
		MASK	REMODBIT
		CCS	A
		TC	STDESIG
		TC	REMODE
DESLOOP		TC	FIXDELAY	# 2 SAMPLES PER SECOND.
		DEC	50

STDESIG		CAF	REPOSBIT
		MASK	RADMODES	# SEE IF GIMBAL LIMIT MONITOR HAS FOUND US
		CCS	A		# OUT OF BOUNDS.  IF SO, THIS BIT SHOWS A
		TCF	BADDES		# REPOSITION TO BE IN PROGRESS.

		CCS	RADMODES	# SEE IF CONTINUOUS DESIGNATE WANTED.
		TCF	+3		# IF SO, DON'T CHECK BIT 10 TO SEE IF IN
		TCF	+2		# LIMITS BUT GO RIGHT TO FINDVAC ENTRY.
		TCF	MOREDES +1

		CS	RADMODES	# IF NON-CONTINUOUS, SEE IF END OF
		MASK	DESIGBIT	# PROBLEM (DATA GOOD IF LOCK-ON WANTED OR
		CCS	A		# WITHIN LIMITS IF NOT).  IF SO, EXIT AFTER
		TCF	ENDRADAR	# CHECKING RR CDU FAIL.

STDESIG1	CCS	DESCOUNT	# SEE IF THE TIME LIMIT HAS EXPIRED
		TCF	MOREDES

		CS	B14+B2		# IF OUT OF TIME, REMOVE ECR ENABLE + TRKR
		EXTEND
		WAND	CHAN12
BADDES		CS	DESIGBIT	# REMOVE DESIGNATE FLAG
		MASK	RADMODES
		TS	RADMODES
		TCF	RDBADEND

MOREDES		TS	DESCOUNT
		CAF	PRIO26		# UPDATE GYRO TORQUE COMMANDS.
		TC	FINDVAC
		EBANK=	LOSCOUNT
		2CADR	DODES

		TCF	DESLOOP

B14+B2		OCT	20002

# Page 547
# PROGRAM NAME:  DODES
#
# FUNCTIONAL DESCRIPTION:
#
#	DODES CALCULATES AND REQUESTS ISSUANCE OF RR GYRO TORQUE
#	COMMANDS.  INITIALLY THE CURRENT RR CDU ANGLES ARE STORED AND
#	THE LOS HALF-UNIT VECTOR TRANSFORMED FROM STABLE MEMBER TO
#	NAVIGATION BASE COORDINATES VIA SMNB IF NECESSARY.  THE
#	SHAFT AND TRUNNION COMMANDS ARE THEN CALCULATED AS FOLLOWS:
#		+ SHAFT = LOS . (COS(S), 0, -SIN(S))  (DOT PRODUCT)
#		- TRUNNION = LOS . (SIN(T)SIN(S), COS(T), SIN(T)COS(S))
#	THE SIGN OF THE SHAFT COMMAND IS THEN REVERSED IF IN MODE 2
#	(RADMODES BIT 12) BECAUSE A RELAY IN THE RR REVERSES THE
#	POLARITY OF THE COMMAND.  AT RRSCALUP EACH COMMAND IS
#	SCALED AND IF EITHER, OR BOTH, OF THE COMMANDS IS GREATER THAN
#	.5 DEGREES, MPAC +1 IS SET POSITIVE.  IF A CONTINUOUS DESIGNATE
#	(RADMODES BIT 15) IS DESIRED AND THE SEARCH ROUTINE IS NOT OPERATING,
#	THE RR AUTO TRACKER ENABLE BIT (CHAN 12 BIT 14) IS CLEARED AND RROUT
#	CALLED TO PUT OUT THE COMMANDS PROVIDED NO REPOSITION (RADMODES BIT 11)
#	IS IN PROGRESS.  IF A CONTINUOUS DESIGNATE AND THE SEARCH ROUTINE IS
#	OPERATING (SRCHOPT FLAT SET) THE TRACK ENABLE IS NOT CLEARED.  IF NO
#	CONTINUOUS DESIGNATE AND BOTH COMMANDS ARE NOT LESS THAN .5 DEGREES AS
#	INDICATED BY MPAC +1, THE RR AUTO TRACKER ENABLE BIT (CHAN 12 BIT 14) IS
# 	CLEARED AND RROUT CALLED TO PUT OUT THE COMMANDS PROVIDED NO REPOSITON
#	(RADMODES BIT 11) IS IN PROGRESS.  IF BOTH COMMANDS ARE LESS THAN .5
#	DEGREES AS INDICATED BY MPAC+1, THE RR AUTO TRACKER ENABLE BIT
#	(CHAN 12 BIT 14) IS CLEARED AND RROUT CALLED TO PUT OUT THE
#	COMMANDS PROVIDED NO REPOSITION (RADMODES BIT 11) IS IN
#	PROGRESS.  IF BOTH COMMANDS ARE LESS THAN .5 DEGREES, THE
#	LOCK-ON FLAG (STATE BIT 5) IS CHECKED.  IF NOT PRESETN, THE
#	DESIGNATE FLAG (RADMODES BIT 10) IS CLEARED, AND ENDOFJOB
#	CALLED.  IF LOCK-ON IS DESIRED, THE RR AUTO TRACKER (CHAN 12
#	BIT 14) IS ENABLED FOLLOWED BY A CHECK OF THE RECEIPT OF THE
#	RR DATA GOOD (CHAN 33 BIT 4) SIGNAL.  IF RR DATA GOOD
#	PRESENT, THE DESIGNATE FLAG (RADMODES BIT 10) IS CLEARED,
# 	THE RR ERROR COUNTER ENABLE BIT (CHAN 12 BIT 2) IS CLEARED,
#	AND ENDOFJOB CALLED.  IF RR DATA GOOD IS NOT PRESENT, RROUT
#	IS CALLED TO PUT OUT THE COMMANDS PROVIDED NO REPOSITION
#	(RADMODES BIT 11) IS IN PROGRESS AFTER WHICH THE JOB IS TERMINATED
#	VIA ENDOFJOB.
#
# CALLING SEQUENCE:
#
#	EXECUTIVE CALL EVERY .5 SECONDS FROM BEGDES.
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	RRTARGET (HALF-UNIT LOS VECTOR IN EITHER SM OR NB COORDINATES),
#	LOKONSW (STATE BIT 5), RRNBSW (STATE BIT 6), RADMODES
#
# SUBROUTINES CALLED:
#
# 	READCDUS, SMNB, CDULOGIC, MAGSUB, RROUT
# Page 548
#
# JOBS OR TASKS INITIATED:
#
#	NONE
#
# ALARMS:  NONE
#
# EXIT:  ENDOFJOB (ALWAYS)

DODES		EXTEND
		DCA	CDUT
		DXCH	TANG

		TC	INTPRET

		SETPD	VLOAD
			0
			RRTARGET
		BON	VXSC
			RRNBSW
			DONBRD		# TARGET IN NAV-BASE COORDINATES
			MLOSV		# MULTIPLY UNIT LOS BY MAGNITUDE
		VSL1	PDVL
			LOSVEL
		VXSC	VAD		# ADD ONE SECOND RELATIVE VELOCITY TO LOS
			MCTOMS
		UNIT	CALL
			CDUTRIG
		CALL
			*SMNB*

DONBRD		STODL	32D
			TANG +1
		RTB	PUSH		# SHAFT COMMAND = V(32D).(COS(S), 0,
			CDULOGIC	#	-SIN(S)).
		SIN	PDDL		# SIN(S) TO 0 AND COS(S) TO 2.
		COS	PUSH
		DMP	PDDL
			32D
			36D
		DMP	BDSU
			0
		STADR
		STORE	TANG +1		# SHAFT COMMAND

		SLOAD	RTB
			TANG
			CDULOGIC
		PUSH	COS		# COS(T) TO 4.
		PDDL	SIN
		PUSH	DMP		# SIN(T) TO 6.
			2
# Page 549
		SL1	PDDL		# DEFINE VECTOR U =	[SIN(T)SIN(S)]
			4		#			[   COS(T)   ]
		PDDL	DMP		#			[SIN(T)COS(S)]
			6
			0
		SL1	VDEF
		DOT	EXIT		# DOT U WITH LOS TO GET TRUNNION COMMAND.
			32D

# Page 550
# AT THIS POINT WE HAVE A ROTATION VECTOR IN DISH AXES LYING IN THE TS PLANE.  CONVERT THIS TO A
# COMMANDED RATE AND ENABLE THE TRACKER IF WE ARE WITHIN .5 DEGREES OF THE TARGET.

		CS	MPAC		# DOT WAS NEGATIVE OF DESREG ANGLE.
		EXTEND
		MP	RDESGAIN	# SCALING ON INPUT ANGLE WAS 4 RADIANS.
		TS	TANG		# TRUNNION COMMAND.
		CS	RADMODES	# A RELAY IN THE RR REVERSES POLARITY OF
		MASK	BIT12		# THE SHAFT COMMANDS IN MODE 2 SO THAT A
		EXTEND			# POSITIVE TORQUE APPLIED TO THE SHAFT
		BZF	+3		# GYRO CAUSES A POSITIVE CHANGE IN THE
		CA	TANG +1		# SHAFT ANGLE.  COMPENSATE FOR THIS SWITCH
		TCF	+2		# BY CHANGING THE POLARITY OF OUR COMMAND.
 +3		CS	TANG +1
		EXTEND
		MP	RDESGAIN	# SCALING ON INPUT ANGLE WAS 4 RADIANS.
		TS	TANG +1		# SHAFT COMMAND FOR RROUT
		TC	INTPRET

		DLOAD	DMP
			2		# COS(S).
			4		# COS(T).
		SL1	PDDL		# Z COMPONENT OF URR.
		DCOMP	PDDL		# Y COMPONENT = -SIN(T)
			0		# SIN(S).
		DMP	SL1
			4		# COS(T).
		VDEF	BON		# FORM URR IN NB AXES.
			RRNBSW		# BYPASS NBSM CONVERSION IN VERB 41
			+3
		CALL
			*NBSM*		# GET URR IN SM AXES.
		DOT	EXIT
			RRTARGET	# GET COSIN OF ANGLE BETWEEN RR AND LOS

		EXTEND
		DCS	COS1/2DG
		DAS	MPAC		# DIFFERENCE OF COSINES, SCALED B-2.
		CCS	MPAC
		CA	ZERO		# IF COS ERROR BIGGER, ERROR IS SMALLER
		TCF	+2
		CA	ONE
		TS	MPAC +1		# ZERO IF RR IS POINTED OK, ONE IF NOT.
# Page 551
# SEE IF TRACKER SHOULD BE ENABLED OR DISABLED.

		CCS	RADMODES	# IF CONTINUOUS DESIGNATE WANTED, PUT OUT
		TCF	SIGNLCHK	# COMMANDS WITHOUT CHECKING MAGNITUDE OF
		TCF	SIGNLCHK	# ERROR SIGNALS
		TCF	DORROUT
SIGNLCHK	CCS	MPAC +1		# SEE IF BOTH AXES WERE WITHIN .5 DEGS.
		TCF	DGOODCHK
		CS	STATE		# IF WITHIN LIMITS AND NO LOCK-ON WANTED,
		MASK	LOKONBIT	# PROBLEM IS FINISHED.
		CCS	A
		TCF	RRDESDUN

		CAF	BIT14		# ENABLE THE TRACKER
		EXTEND
		WOR	CHAN12

DGOODCHK	CAF	BIT4		# SEE IF DATA GOOD RECEIVED YET
		EXTEND
		RAND	CHAN33
		CCS	A
		TCF	DORROUT

RRDESDUN	CS	BIT10		# WHEN PROBLEM DONE, REMOVE BIT 10 SO NEXT
		MASK	RADMODES	# WAITLIST TASK WE WILL GO TO RGOODEND.
		INHINT
		TS 	RADMODES

		TC	DOWNFLAG	# RESET LOSCMFLG TO PREENT A
		ADRES 	LOSCMFLG	# RECOMPUTATION OF LOS AFTER DATA GOOD
		CS	BIT2		# TURN OFF ENABLE RR ERROR COUNTER
		EXTEND
		WAND	CHAN12
		TCF	ENDOFJOB	# WITH ECTR DISABLED.

DORROUT		CA	FLAGWRD2	# IF BOTH LOSCMFLAG AND SEARCH FLAG ARE
		MASK	BIT12,14	# ZERO, BYPASS VELOCITY ADJUSTMENT TO LOS
		EXTEND
		BZF	NOTP20
		TC	INTPRET
		VLOAD	VXSC		# MULTIPLY UNIT LOS BY MAGNITUDE
			RRTARGET
			MLOSV
		VSL1	PUSH
		VLOAD	VXSC		# ADD .5 SEC. OF VELOCITY
			LOSVEL		# TO LOS VECTOR
			MCTOMS
		VSR1	VAD
		UNIT
		STODL	RRTARGET	# STORE VELOCITY-CORRECTED LOS (UNIT)
# Page 552
			36D
		STORE	MLOSV		# AND STORE MAGNITUDE
		EXIT
NOTP20		INHINT
		CS	RADMODES	# PUT OUT COMMAND UNLESS MONITOR
		MASK	REPOSBIT	# REPOSITION HAS TAKEN OVER
		CCS	A
		TC	RROUT

		CA	FLAGWRD2
		MASK	LOSCMBIT	# IF LOSCMFLG NOT SET, DON'T TEST
		EXTEND			# LOS COUNTER
		BZF	ENDOFJOB
		CCS	LOSCOUNT	# TEST LOS COUNTER TO SEE IF TIME TO GET
		TC	DODESEND	# A NEW LOS
		INHINT
		TC	KILLTASK	# YES -- KILL TASK WHICH SCHEDULES DODES
		CADR	DESLOOP +2
		RELINT
		CCS	NEWJOB
		TC	CHANG1
		TC	BANKCALL
		CADR	R21LEM2

DODESEND	TS	LOSCOUNT
		TC	ENDOFJOB

RDESGAIN	DEC	.53624		# TRIES TO NULL .5 ERROR IN .5 SEC.
BIT12,14	EQUALS	PRIO24		# OCT 24000
COS1/2DG	2DEC	.999961923 B-2	# COSINE OF 0.5 DEGREES.
MCTOMS		2DEC	100 B-13

# Page 553
# RADAR READ INITIALIZATION
#
# RADAR DATA READ BY A BANKCALL FOR THE APPROPRIATE LEAD-IN BELOW.

LRALT		TC	INITREAD -1	# ONE SAMPLE PER READING.
ALLREAD		OCT	17

LRVELZ		TC	INITREAD
		OCT	16

LRVELY		TC	INITREAD
		OCT	15

LRVELX		TC	INITREAD
		OCT	14

RRRDOT		TC	INITREAD -1
		OCT	12

RRRANGE		TC	INITREAD -1
		OCT	11

# LRVEL IS THE ENTRY TO THE LR VELOCITY READ ROUTINE WHEN 5 SAMPLES ARE
# WANTED.  ENTER WITH C(A)= 0,2,4 FOR LRVELZ,LRVELY,LRVELX RESP.

LRVEL		TS	TIMEHOLD	# STORE VBEAM INDEX HERE MOMENTARILY
		CAF	FIVE		# SPECIFY FIVE SAMPLES
		INDEX	TIMEHOLD
		TCF	LRVELZ

# Page 554
 -1		CAF	ONE		# ENTRY TO TAKE ONLY 1 SAMPLE
INITREAD	INHINT

		TS	TIMEHOLD	# GET DT OF MIDPOINT OF NOMINAL SAMPLING
		EXTEND			# INTERVAL (ASSUMES NO BAD SAMPLES WILL BE
		MP	BIT3		# ENCOUNTERED).
		DXCH	TIMEHOLD

		CCS	A
		TS	NSAMP
		AD	ONE
# INSERT FOLLOWING INSTRUCTION TO GET 2N TRIES FOR N SAMPLES.
#		DOUBLE
		TS	SAMPLIM

		CAF	DGBITS		# READ CURRENT VALUE OF DATA GOOD BITS.
		EXTEND
		RAND	CHAN33
		TS	OLDATAGD

		CS	ALLREAD
		EXTEND
		WAND	CHAN13		# REMOVE ALL RADAR BITS

		INDEX	Q
		CAF	0
		EXTEND
		WOR	CHAN13		# SET NEW RADAR BITS

		EXTEND
		DCA	TIME2
		DAS	TIMEHOLD	# TIME OF NOMINAL MIDPOINT

		CAF	ZERO
		TS	L
		DXCH	SAMPLSUM
		TCF	ROADBACK

DGBITS		OCT	230

# Page 555
# RADAR RUPT READER
#
# THIS ROUTINE STARTS FROM A RADARUPT.  IT READS THE DATA & LOTS MORE.

		SETLOC	RADARUPT
		BANK

		COUNT*	$$/RRUPT
RADAREAD	EXTEND			# MUST SAVE SBANK BECAUSE OF RUPT EXITS
		ROR	SUPERBNK	# VIA TASKOVER (BADEND OR GOODEND).
		TS	BANKRUPT
		EXTEND
		QXCH	QRUPT

		CAF	SEVEN
		EXTEND
		RAND	CHAN13
		TS	DNINDEX
		EXTEND			# IF RADAR SELECT BITS ZERO, DO NOT STORE
		BZF	TRYCOUNT	# DATA FOR DOWNLIST (ERASABLE PROBLEMS)
		CA	RNRAD
		INDEX	DNINDEX
		TS	DNRRANGE -1
TRYCOUNT	CCS	SAMPLIM
		TCF	PLENTY
		TCF	NOMORE
		TC	ALARM
		OCT	520
		TC	RESUME

NOMORE		CA	FLGWRD11	# IS LRBYPASS SET?
		MASK	LRBYBIT
		EXTEND
		BZF	BADRAD		# NO.  R12 IS ON -- BYPASS 521 ALARM.

		CS	FLAGWRD3	# CHECK R04FLAG.
		MASK	R04FLBIT	# IF 1, R04 IS RUNNING.  DO NOT ALARM
		EXTEND
		BZF	BADRAD

		TC	ALARM		# P20 WANTS THE ALARM.
		OCT	521
BADRAD		CS	ONE
		TS	SAMPLIM
		TC	RDBADEND -2
PLENTY		TS	SAMPLIM
		CAF	BIT3
		EXTEND
		RAND	CHAN13		# TO FIND OUT WHICH RADAR
		EXTEND
# Page 556
		BZF	RENDRAD

		TC	R77CHECK	# R77 QUITS HERE.
LRPOSCHK	CA	RADMODES	# SEE IF LR IN DESIRED POSITION
		EXTEND
		RXOR	CHAN33
		MASK	BIT6
		EXTEND
		BZF	VELCHK

		TC	ALARM
		OCT	522
		TC	BADRAD

VELCHK		CAF	BIN3		# = 00003 OCT
		EXTEND
		RXOR	CHAN13		# RESET ACTIVITY BIT
		MASK	BIN3
		EXTEND
		BZF	LRHEIGHT	# TAKE A LR RANGE READING

		CAF	POSMAX
		MASK	RNRAD
		AD	LVELBIAS
		TS	L
		CAE	RNRAD
		DOUBLE
		MASK	BIT1
		DXCH	ITEMP3

		CAF	BIT8		# DATA GOOD ISN'T CHECKED UNTIL AFTER READ-
		TC	DGCHECK		# ING DATA SO SOME RADAR TESTS WILL WORK
					# INDEPENDENT OF DATA GOOD.

		CCS	NSAMP
		TC	NOEND
GOODRAD		CS	ONE
		TS	SAMPLIM
		CS	ITEMP1		# WHEN ENOUGH GOOD DATA HAS BEEN GATHERED,
		MASK	RADMODES	# RESET DATA FAIL FLAGS FOR SETTRKF.
		TS	RADMODES
		TC	RADLITES	# LAMPS MAY GO OFF IF DATA JUST GOOD.
		TC	RGOODEND -2

NOEND		TS	NSAMP
RESAMPLE	CCS	SAMPLIM		# SEE IF ANY MORE TRIES SHOULD BE MADE.
		TCF	+2
		TCF	DATAFAIL	# N SAMPLES NOT AVAILABLE.
		CAF	BIT4		# RESET ACTIVITY BIT.
		EXTEND
# Page 557
		WOR	CHAN13		# RESET ACTIVITY BIT
		TC	RESUME


LRHEIGHT	CAF	BIT5
		TS	ITEMP1		# (POSITION OF DATA GOOD BIT IN CHAN 33)

		CAF	BIT9
		TC	SCALECHK -1

RENDRAD		CAF	REPOSBIT	# MAKE SURE ANTENNA HAS NOT GONE OUT OF
		MASK	RADMODES	# LIMITS.
		CCS	A
		TCF	BADRAD

		CS	RADMODES	# BE SURE RR CDU HASN'T FAILED.
		MASK	RCDUFBIT
		CCS	A
		TCF	BADRAD

		CAF	BIT4		# SEE IF DATA HAS BEEN GOOD.
		TS	ITEMP1		# (POSITION OF DATA GOOD BIT IN CHAN 33)

		CAF	BIT1		# SEE IF RR RDOT.
		EXTEND
		RAND	CHAN13
		TS	Q		# FOR LATER TESTING.
		CCS	A
		TCF	+2
		TCF	RADIN		# NO SCALE CHECK FOR RR RDOT.
		CAF	BIT3
		TS	L

SCALECHK	EXTEND
		RAND	CHAN33		# SCALE STATUS NOW
		XCH	L
		MASK	RADMODES	# SCALE STATUS BEFORE
		EXTEND
		RXOR	LCHAN		# SEE IF THEY DIFFER
		CCS	A
		TC	SCALCHNG	# THEY DIFFER.

RADIN		CAF	POSMAX
		MASK	RNRAD
		TS	ITEMP4

		CAE	RNRAD
		DOUBLE
		MASK	BIT1
		TS	ITEMP3
# Page 558
		CCS	Q		# SEE IF RR RDOT.
		TCF	SCALADJ		# NO, BUT SCALE CHANGING MAY BE NEEDED.

		EXTEND			# IF RR RANGE RATE, THROW OUT BIAS
		DCS	RDOTBIAS
DASAMPL		DAS	ITEMP3
DGCHECK2	CA	ITEMP1		# SEE THAT DATA HAS BEEN GOOD BEFORE AND
		TC	DGCHECK +1	# AFTER TAKING SAMPLE.
		TC	GOODRAD

SCALCHNG	LXCH	RADMODES
		AD	BIT1
		EXTEND
		RXOR	LCHAN
		TS	RADMODES
		CAF	DGBITS		# UPDATE LAST VALUE OF DATA GOOD BITS.
		EXTEND
		RAND	CHAN33
		TS	OLDATAGD
		TC	UPFLAG		# SET RNGSCFLG
		ADRES	RNGSCFLG	# FOR LRS24.1
		TCF	BADRAD

# R77 MUST IGNORE DATA FAILS SO AS NOT TO DISTURB THE ASTRONAUT.

R77CHECK	CS	FLAGWRD5
		MASK	R77FLBIT
		CCS	A
		TC	Q		# NOT R77
		CS	BITS5,8		# UPDATE LR DATA GOOD BITS IN RADMODES
		MASK	RADMODES
		TS	L
		CA	BITS5,8
		EXTEND
		RAND	CHAN33
		AD	L
		TS	RADMODES
		TC	RGOODEND -2
BITS5,8		OCT	220

# Page 559
# THE FOLLOWING ROUTINE INCORPORATES RR RANGE AND LR ALT SCALE INFORMATION AND LEAVES DATA AT LO SCALE.

SCALADJ		CCS	L		# L HAS SCALE INBIT FOR THIS RADAR.
		TCF	+2		# ON HIGH SCALE.
		TCF	DGCHECK2

		CA	DNINDEX
		MASK 	BIT3
		CCS	A
		TCF	LRSCK

		DXCH	ITEMP3
		DDOUBL
		DDOUBL
		DDOUBL
		DXCH	ITEMP3

		TCF	DGCHECK2

LRSCK		CCS	ITEMP3
		TCF	+11
		CS	ITEMP4
		AD	HISCALIM
		EXTEND
		BZMF	+5

		CS	FLGWRD11
		MASK	SCABBIT
		ADS	FLGWRD11
		TCF	+4

		CS	SCABBIT
		MASK	FLGWRD11
		TS	FLGWRD11

		EXTEND
		DCA	ITEMP3
		DDOUBL
		DDOUBL
		TCF	DASAMPL

HISCALIM	DEC	460		# 2481.7 FT ******************************
# Page 560
DGCHECK		TS	ITEMP1		# UPDATE DATA GOOD BIT IN OLDATAGD AND
		EXTEND			# MAKE SURE IT WAS ON BEFORE AND AFTER THE
		RAND	CHAN33		# SAMPLE WAS TAKEN BEFORE RETURNING.  IF
		TS	L		# NOT, GOES TO RESAMPLE TO TRY AGAIN.  IF
		CS	ITEMP1		# MAX NUMBER OF TRIES HAS BEEN REACHED,
		MASK	OLDATAGD	# THE BIT CORRESPONDING TO THE DATA GOOD
		AD	L		# WHICH FAILED TO APPEAR IS IN ITEMP1 AND
		XCH	OLDATAGD	# CAN BE USED TO SET RADMODES WHICH VIA
		MASK	ITEMP1		# SETTRKF SETS THE TRACKER FAIL LAMP.
		AD	L
		CCS	A		# SHOULD BOTH BE ZERO.
		TC	RESAMPLE
		DXCH	ITEMP3		# IF DATA GOOD BEFORE AND AFTER, ADD TO
		DAS	SAMPLSUM	# ACCUMULATION.
		TC	Q

DATAFAIL	CS	ITEMP1		# IN THE ABOVE CASE, SET RADMODES BIT
		MASK	RADMODES	# SHOWING SOME RADAR DATA FAILED.
		AD	ITEMP1
		TS	RADMODES

		DXCH	ITEMP3		# IF WE HAVE BEEN UNABLE TO GATHER N
		DXCH	SAMPLSUM	# SAMPLES, USE LAST ONE ONLY.
		TC	RADLITES
		TCF	NOMORE
# Page 561
# THIS ROUTINE CHANGES THE LR POSITION, AND CHECKS THAT IT GOT THERE.

		SETLOC	P20S1
		BANK

		COUNT*	$$/RSUB
LRPOS2		INHINT

		CS	RADMODES
		MASK	LRPOSBIT	# SHOW DESIRED LR POSITION IS 2
		ADS	RADMODES

		CAF	BIT7
		EXTEND
		RAND	CHAN33		# SEE IF ALREADY THERE.
		EXTEND
		BZF	RADNOOP

		CAF	BIT13
		EXTEND
		WOR	CHAN12		# COMMAND TO POSITION 2
		CAF	6SECS		# START SCANNING FOR INBIT AFTER 7 SECS.
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	LRPOSCAN

		TC	ROADBACK

LRPOSNXT	TS	SAMPLIM
		TC	FIXDELAY	# SCAN ONCE PER SECOND 15 TIMES MAX AFTER
		DEC	100		# INITIAL DELAY OF 7 SECONDS.

		CAF	BIT7		# SEE IF LR POS2 IS ON
		EXTEND
		RAND	CHAN33
		EXTEND
		BZF	LASTLRDT	# IF THERE, WAIT FINAL SECOND FOR BOUNCE.

		CCS	SAMPLIM		# SEE IF MAX TIME UP.
		TCF	LRPOSNXT

		CS	BIT13		# IF TIME UP, DISABLE COMMAND AND ALARM.
		EXTEND
		WAND	CHAN12
		TCF	RDBADEND

RADNOOP		CAF	ONE		# NO FURTHER ACTION REQUESTED.
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	RGOODEND
# Page 562
		TC	ROADBACK

LASTLRDT	CA	2SECS		# WAIT TWO SECONDS AFTER RECEIPT OF INBIT
		TC	VARDELAY	# TO WAIT FOR ANTENNA BOUNCE TO DIE OUT.

		CS	BIT13		# REMOVE COMMAND
		EXTEND
		WAND	CHAN12
		TCF	RGOODEND

LRPOSCAN	CAF	FOURTEEN	# SET UP FOR 15 SAMPLES.
		TCF	LRPOSNXT
6SECS		DEC	600
# Page 563
# SEQUENCES TO TERMINATE RR OPERATIONS.

ENDRADAR	CAF	RCDUFBIT	# PROLOG TO CHECK RR CDU FAIL BEFORE END.
		MASK	RADMODES
		CCS	A
		TCF	RGOODEND
		TCF	RDBADEND
 -2		CS	ZERO		# RGOODEND WHEN NOT UNDER WAITLIST CONTROL
		TS	RUPTAGN

RGOODEND	CAF	TWO
		TC	POSTJUMP
		CADR	GOODEND

 -2		CS	ZERO		# RDBADEND WHEN NOT UNDER WIATLIST.
		TS	RUPTAGN
RDBADEND	CAF	TWO
		TC	POSTJUMP
		CADR	BADEND

BIN3		EQUALS	THREE

# Page 564
# PROGRAM NAME:  LPS20.1 VECTOR EXTRAPOLATION AND LOS COMPUTATION
# MOD. NO. 2	BY J.D. COYNE	SDC	DATE 12-7-66
#
# FUNCTIONAL DESCRPIPTION:
#	1)	EXTRAPOLATE THE LEM AND CSM VECTORS IN ACCORDANCE WITH THE TIME REFERRED TO IN CALLER + 1.
#	2)	COMPUTES THE LOS VECTOR TO THE CSM, CONVERTS IT TO STABLE MEMBER COORDINATES AND STORES IT IN RRTARGET.
#	3)	COMPUTES THE MAGNITUDE OF TEH LOS VECTOR AND STORES IT IN MLOSV
#
# CALLING SEQUENCE:	CALL
#				LPS20.1
#
# SUBROUTINES CALLED:
#	LEMPREC, CSMPREC
#
# NORMAL EXIT:  RETURN TO CALLER + 2.
#
# ERROR EXITS:  NONE
#
# ALARMS:  NONE
#
# OUTPUT:
#	LOS VECTOR (HALF UNIT) IN SM COORDINATES STORED IN RRTARGET
#	MAGNITUDE OF TEH LOS VECTOR (METERS SCALED B-29) STORED IN MSLOV
#	RRNBSW CLEARED.
#
# INITIALIZED ERASABLE
#	TDEC1 MUST CONTAIN THE TIME FOR EXTRAPOLATION
#	SEE ORBITAL INTEGRATION ROUTINE
#
# DEBRIS:
#	MPAC DESTROYED BY THE ROUTINE

		BANK	23
		SETLOC	P20S
		BANK
# Page 565
		COUNT*	$$/LPS20

LPS20.1		STQ	BOFF
			LS21X
			LOSCMFLG	# LOSCMFLG = 0 MEANS NOT CALLED BY R21
			LMINT		# SO CALL LEMCONIC TO GET LM STATE
		BON			# IF IN R21 AND ON LUNAR SURFACE
			SURFFLAG	# DON'T CALL LEMCONIC
			CSMINT
LMINT		CALL
			LEMCONIC	# EXTRAPOLATE LEM
		VLOAD
			RATT
		STOVL	LMPOS		# SAVE LM POSITION B-29
			VATT
		STODL	LMVEL		# SAVE LM VELOCITY B-7
			TAT
CSMINT		STCALL	TDEC1
			CSMCONIC	# EXTRAPOLATE CSM
		VLOAD	VSU		# COMPUTE RELATIVE VELOCITY V(CSM) - V(LM)
			VATT
			LMVEL
		MXV	VSL1
			REFSMMAT
		EXIT
		TC	KILLTASK	# KILL THE TASK WHICH CALLS DODES SINCE
		CADR	DESLOOP +2	# STORING INTO ERASEABLES DODES USES
		TC	INTPRET
		STOVL	LOSVEL
			RATT
		VSU	BOFF
			LMPOS
			RNDVZFLG
			NOTSHIFT
		BOVB
			TCDANZIG
		VSL
			9D
NOTSHIFT	UNIT	BOVB		# IF OVERFLOW, RANGE MUST BE GREATER
			526ALARM	# THAN 400 N. M.
		MXV	VSL1
			REFSMMAT	# CONVERT TO STABLE MEMBER
		STODL	RRTARGET
			36D		# SAVE MAGNITUDE OF LOS VECTOR FOR
		STORE	MLOSV		# VELOCITY CORRECTION IN DESIGNATE
		CLRGO
			RRNBSW
			LS21X

# Page 566
# PROGRAM NAME:  LPS20.2  400 NM RANGE CHECK
# MOD. NO. 2	BY J.D. COYNE	SDC	DATE 12-7-66
#
# FUNCTIONAL DESCRIPTION:
#	COMPARES THE MAGNITUDE OF THE LOS VECTOR TO 400 NM.
#
# CALLING SEQUENCE:	CALL
#				LPS20.2
#
# SUBROUTINES CALLED:  NONE
#
# NORMAL EXIT:  RETURN TO CALLER +1, MPAC EQ 0 (RANGE 400NM OR LESS.)
#
# ERROR EXITS:  RETURN TO CALLER +1, MPAC EQ 1 (RANGE GREATER THAN 400NM)
#
# ALARMS:  NONE
#
# OUTPUT:  NONE
#
# INITIALIZED ERASEABLE:
#	PDL 36D MUST CONTAIN THE MAGNITUDE OF THE VECTOR
#
# DEBRIS:
#	MPAC DESTROYED BY THIS ROUTINE

		SETLOC	P20S1
		BANK
		COUNT*	$$/LPS20

LPS20.2		DLOAD	DSU
			MLOSV		# MAGNITUDE OF LOS
			FHNM		# OVER 400NM
		BPL
			TOFAR
		SLOAD	RVQ
			ZERO/SP
TOFAR		SLOAD	RVQ
			ONE/SP
ONE/SP		DEC	1
# Page 567
FHNM		2DEC	740800 B-20	# 400 NAUTICAL MILES IN METERS B-20

# Page 568
# PROGRAM NAME:  LRS22.1 (DATA READ SUBROUTINE 1)
# MOD. NO.: 1		BY: P. VOLANTE  SDC		DATE:  11-15-66
#
# FUNCTIONAL DESCRIPTION:
#	1)	READS RENDEZVOUS RADAR RANGE AND RANGE-RATE, TRUNNION AND SHAFT ANGLES, THREE CDU VALUES AND TIME.  CONVERTS THIS
#		DATA AND LEAVES IT FOR THE MEASUREMENT INCORPORATION ROUTINE (LSR22.3).  CHECKS FOR THE RR DATA GOOD DISCRETE, FOR
#		RR REPOSITION AND RR CDU FAIL
#	2)	COMPARES RADAR LOS WITH LOS COMPUTED FROM STATE VECTORS TO SEE IF THEY ARE WITHIN THREE DEGREES
#
# CALLING SEQUENCE:  BANKCALL FOR LRS22.1
#
# SUBROUTINES CALLED:
#	RRDOT		LPS20.1
#	RRRANGE		BANKCALL
#	RADSTALL	CDULOGIC
#	RRNB		SMNB
#
# NORMAL EXIT:  RETURN TO CALLER+1 WITH MPAC SET TO +0
#
# ERROR EXITS:  RETURN TO CALLER+1 WITH ERROR CODE STORED IN MPAC AS FOLLOWS:
#	00001 -- ERROR EXIT 1 -- RR DATA NO GOOD (NO RR DATA GOOD DISCRETE OR RR CDU FAIL OR RR REPOSITION)
#	00002 -- ERROR EXIT 2 -- RR LOS NOT WITHIN THREE DEGREES OF LOS COMPUTED FROM STATE VECTORS
#
# ALARMS:  521 -- COULD NOT READ RADAR DATA (RR DATA GOOD DISCRETE NOT PRESENT BEFORE AND AFTER READING THE RADAR)
#	(THIS ALARM IS ISSUED BY RADARREAD SUBROUTINE WHICH IS ENTERED FROM A RADARUPT)
#
# OUTPUT:  RRLOSVEC -- THE RR LINE-OF-SIGHT VECTOR (USED BY LRS22.2) -- A HALF-UNIT VECTOR
# 	RM -- THE RR RANGE READING (TO THE CSM) DP, IN METERS SCALED BY B-29 (USED BY LRS22.2 AND LRS22.3)
#
#	ALL OF THE FOLLOWING OUTPUTS ARE USED BY LRS22.3:
#		RDOTM -- THE RR RANGE-RATE READING, DP, IN METERS PER CENTISECOND, SCALED BY B-7
#		RRTRUN -- THE RR TRUNNION ANGLE, DP, IN REVOLUTIONS, SCALED B0
#		RRSHAFT -- RR SHAFT ANGLE, DP, IN REVOLUTIONS, SCALED B0
#		AIG,AMG,AOG -- THE CDU ANGLES, THREE SP WORDS
#		MKTIME -- THE TIME OF THE RR READING, DP, IN CENTISECONDS
#
# ERASABLE INITIALIZATION REQUIRED:
#	RNRAD, THE RADAR READ COUNTER FROM WHICH IS OBTAINED:
# Page 569
#		1) RR RANGE SCALED 9.38 FT. PER BIT ON THE LOW SCALE AND 75.04 FT. PER BIT ON THE HIGH SCALE
#		2) RR RANGE RATE, SCALED .6278 FT./SEC. PER BIT
#	THE CDU ANGLES FROM CDUX, CDUY, CDUZ, AND TIME1 AND TIME2
#
# DEBRIS:  LRS22.1X, A, L, Q, PUSHLIST

		BANK	32
		SETLOC	LRS22
		BANK
		COUNT*	$$/LRS22

LRS22.1		TC	MAKECADR
		TS	LRS22.1X
		TC	DOWNFLAG
		ADRES	RNGSCFLG
		INHINT
		CAF	BIT3
		EXTEND			# GET RR RANGE SCALE
		RAND	CHAN33		# FROM CHANNEL 33 BIT 3
		TS	L
		CS	RRRSBIT
		MASK	RADMODES
		AD	L
		TS	RADMODES
		RELINT
READRDOT	TC	BANKCALL
		CADR	RRRDOT		# READ RANGE-RATE (ONE SAMPLE)
		TC	BANKCALL
		CADR	RADSTALL	# WAIT FOR DATA READ COMPLETION
		TCF	EREXIT1		# COULD NOT READ RADAR-ERROR EXIT 1

		INHINT			# NO INTERRUPTS WHILE READING TIME AND CDU
		DXCH	TIMEHOLD	# SET MARK TIME EQUAL TO THE MID-POINT
		DXCH	MPAC +5		# TEMP BUFFER FOR DOWNLINK
		DXCH	SAMPLSUM	# SAVE RANGE-RATE READING
		DXCH	RDOTMSAV
		EXTEND
		DCA	CDUY		# SAVE ICDU ANGLES
		DXCH	MPAC +3		# TEMP BUFFER FOR DOWNLINK
		CA	CDUX
		TS	MPAC +2		# TEMP BUFFER FOR DOWNLINK
		EXTEND
		DCA	TIME2		# SAVE TIME
		DXCH	MPAC		# SAVE TIME OF CDUY READINGS IN MPAC
		EXTEND
		DCA	CDUT		# SAVE TRUNNION AND SHAFT ANGLES FOR RRNB
		DXCH	TANG
# Page 570
		RELINT
		TC	BANKCALL
		CADR	RRRANGE		# READ RR RANGE (ONE SAMPLE)
		TC	BANKCALL
		CADR	RADSTALL	# WAIT FOR READ COMPLETE
		TC	CHEXERR		# CHECK FOR ERRORS DURING READ
		INHINT			# COPY CYCLE FOR MARK DATA ON DOWNLINK
		DXCH	DNRRANGE	# RANGE, RANGE RATE (RAW DATA)
		DXCH	RANGRDOT
		DXCH	MPAC +5
		DXCH	MKTIME		# MARK TIME
		DXCH	MPAC +3
		DXCH	AIG		# CDUY, CDUZ
		EXTEND
		DCA	TANG		# PRESERVE TANG
		DXCH	TANGNB		# TRUNNION AND SHAFT ANGLES
		CA	MPAC +2
		TS	AOG		# CDUX
		TC	INTPRET
		STODL	20D		# SAVE TIME OF CDU READINGS IN 20D
			RDOTMSAV	# CONVERT RDOT UNITS AND SCALING
		SL	DMPR		# START WITH READING SCALED B-28, -.6278
			14D		# FT./SECOND PER BIT
			RDOTCONV	# END WITH METERS/CENTISECOND, B-7
		STORE	RDOTM
		SLOAD	RTB
			TANG		# GET TRUNNION ANGLE
			CDULOGIC	# CONVERT TO DP ONES COMP. IN REVOLUTIOINS
		STORE	RRTRUN		# AND SAVE FOR TMI ROUTINE (LSR22.3)
		SLOAD	RTB
			TANG +1		# DITTO FOR SHAFT ANGLE
			CDULOGIC
		STODL	RRSHAFT
			SAMPLSUM
		DMP	SL2R		# CONVERT UNITS AND SCALING DP RANGE
			RANGCONV	# PER BIT, END WITH METERS, SCALED -29
		STCALL	RM
			RRNB		# COMPUTE RADAR LOS USING RRNB
		STODL	RRBORSIT	# AND SAVE
			20D
		STCALL	TDEC1		# GET STATE VECTOR LOS AT TIME OF CDU READ
			LPS20.1
		EXIT
		CA	AIG		# STORE IMU CDU ANGLES AT MARKTIME
		TS	CDUSPOT		# IN CDUSPOT FOR TRG*SMNB
		CA	AMG
		TS	CDUSPOT +2
		CA	AOG
		TS	CDUSPOT +4
		TC	INTPRET
# Page 571
		VLOAD	CALL		# LOAD VECTOR AND CALL TRANSFORMATION
			RRTARGET
			TRG*SMNB	# ROTATE LOS AT MARKTIME FROM SM TO NB.
		DOT			# DOT WITH RADAR LOS TO GET ANGLE
			RRBORSIT
		SL1	ACOS		# BETWEEN THEM
		STORE	DSPTEM1		# STORE FOR POSSIBLE DISPLAY
		DSU	BMN		# IS IT LESS THAN 3 DEGREES
			THREEDEG
			NORMEXIT	# YES -- NORMAL EXIT

		EXIT			# ERROR EXIT 2
		CAF	BIT2		# SET ERROR CODE
		TS	MPAC
		TCF	OUT22.1

NORMEXIT	EXIT			# NORMAL EXIT -- SET MPAC EQUAL ZERO
		CAF	ZERO
		TS	MPAC
OUT22.1		CAE	LRS22.1X	# EXIT FROM LRS22.1
		TC	BANKJUMP
CHEXERR		CAE	FLAGWRD5
		MASK	RNGSCBIT
		CCS	A		# CHECK IF RANGE SCALE CHANGED
		TCF	READRDOT	# YES -- TAKE ANOTHER READING

EREXIT1		CA	BIT1		# SET ERROR CODE
		TS	MPAC
		TC	OUT22.1
THREEDEG	2DEC	.008333333	# THREE DEGREES, SCALED REVS, B0

RRLOSVEC	EQUALS	RRTARGET

# Page 572
# PROGRAM NAME -- LRS22.2 (DATA READ SUBROUTINE 2)
# MOD. NO.: 1		BY: P. VOLANTE  SDC		DATE: 4-11-67
#
# FUNCTIONAL DESCRIPTION:
#	(Yes, I know point #1 is missing.  It is missing from the program listing -- RSB 2003)
#	2)  CHECKS IF THE RR LOS (I.E., THE RADAR BORESIGHT VECTOR) IS WITHIN 30 DEGREES OF THE LM +Z AXIS
#
# CALLING SEQUENCE:  BANKCALL FOR LRS22.2
#
# SUBROUTINES CALLED:  G+N, AUTO, SETMAXDB
#
# NORMAL EXIT:  RETURN TO CALLER WITH MPAC SET TO +0 (VIA SWRETURN)
#
# ERROR EXIT:  RETURN TO CALLER WITH MPAC SET TO 00001 -- RADAR LOS NOT WITHIN 30 DEGREES OF LM +Z AXIS.
#
# ALARMS:  NONE
#
# ERASABLE INITIALIZATION REQUIRED:
#	RRLOSVEC -- THE RR LINE-OF-SIGHT VECTOR -- A HALF UNIT VECTOR COMPUTED BY LRS22.1
#	RM -- RR RANGE, METERS B-29, FROM LRS22.1
#	BIT 14 CHANNEL 31 -- INDICATES AUTOPILOT IS IN AUTO MODE
#
# DEBRIS -- A,L,Q,MPAC -- PUSHLIST AND PUSHLOC ARE NOT CHANGED BY THIS ROUTINE

		SETLOC	P20S
		BANK
LRS22.2		TC	MAKECADR
		TS	LRS22.1X
		TC	INTPRET
					# CHECK IF RR LOS IS WITHIN 30 DEG OF
30DEGCHK	DLOAD	ACOS		# THE SPACECRAFT +Z AXIT
			RRBORSIT +4	# BY TAKING ARCCOS OF Z-COMP. OF THE RR
					# LOS VECTOR, A HALF UNIT VECTOR
					# IN NAV BASE AXES)
		DSU	BMN
			30DEG
			OKEXIT		# NORMAL EXIT -- WITHIN 30 DEG.
		EXIT			# ERROR EXIT -- NOT WITHIN 30 DEG.
		CAF	BIT1		# SETS ERROR CODE IN MPAC
		TS	MPAC
		TCF	OUT22.2
OKEXIT		EXIT			# NORMAL EXIT -- SET MPAC = ZERO

# Page 573
		CAF	ZERO
		TS	MPAC
OUT22.2		CAE	LRS22.1X
		TC	BANKJUMP

30DEG		2DEC	.083333333	# THIRTY DEGREES, SCALED REVS, B0

# Page 574
# PROGRAM NAME -- LSR22.3				DATE -- 29 MAY 1967
# MOD. NO 3						LOG SECTION -- P20-P25
# MOD. BY -- DANFORTH					ASSEMBLY LEMP20S REV 10
#
# FUNCTIONAL DESCRIPTION:
#	THIS ROUTINE COMPUTES THE B-VECTORS ADN DELTA Q FOR EACH OF THE QUANTITIES MEASURED BY THE RENDEZVOUS
#	RADAR.  (RANGE, RANGE RATE, SHAFT AND TRUNNION ANGLES).  THE ROUTINE CALLS THE INCORP1 AND INCORP2 ROUTINES
#	WHICH COMPUTE THE DEVIATIONS AND CORRECT THE STATE VECTOR.
#
# CALLING SEQUENCE:
#	THIS ROUTINE IS PART OF P20 RENDEZVOUS NAVIGATION FOR THE LM COMPUTER ONLY.  THE ROUTINE IS ENTERED FROM
# 	R22 LEM ONLY AND RETURNS DIRECTLY TO R22LEM FOLLOWING SUCCESSFUL INCORPORATION OF MEASURED DATA.  IF THE
#	COMPUTED STATE VECTOR DEVATIONS EXCEED THE MAXIMUM PERMITTED.  THE ROUTINE RETURNS TO R22LEM TO DISPLAY
#	THE DEVIATIONS.  IF THE ASTRONAUT ACCEPTS THE DATA R22LEM RETURNS TO LSR22.3 TO INCORPORATE THE
#	DEVIATIONS INTO THE STATE VECTOR.  IF THE ASTRONAUT REJECTS THE DEVIATIONS, NO MORE MEASUREMENTS ARE
#	PROCESSED FOR THIS MARK, I.E.,  R22LEM GETS THE NEXT MARK.
#
# SUBROUTINES CALLED:
#	WLINIT		LGCUPDTE	INTEGRV		INCORP1		ARCTAN
#	GETULC		RADARANG	INCORP2		NBSM		INTSTALL
#
# OUTPUT:
#	CORRECTED LM OR CSM STATE VECTOR (PERMANENT)
#	NUMBER OF MARKS INCORPORATED IN MARKCTR
#	MAGNITUDE OF POSITION DEVIATION (FOR DISPLAY) IN R22DISP METERS B-29
#	MAGNITUDE OF VELOCITY DEVIATION (FOR DISPLAY) IN R22DISP +2 M/CSEC B-7
#	UPDATED W-MATRIX
#
# ERASABLE INITIALIZATION REQUIRED:
#	LM AND CSM STATE VECTORS
#	W-MATRIX
#	MARK TIME IN MKTIME
#	RADAR RANGE IN RM METERS B-29
#		RANGE RATE IN RDOTM METERS/CSES B-7
#		SHAFT ANGLE IN RRSHAFT REVS. B0
#		TRUNNION ANGLE IN RRTRUN REVS. B0
#	GIMBAL ANGLES	INNER IN AIG
#			MIDDLE IN AMG
#			OUTER IN ACG
#	REFSMMAT
#	RENDWFLG
#	NOANGFLG
#	VEHUPFLG
#
# DEBRIS:
#	PUSHLIST -- ALL
#	MX, MY, MZ (VECTORS)
# Page 575
#	ULC, RXZ, SINTHETA, LGRET, RDRET, BVECTOR, W.IND, X78T

		BANK	13
		SETLOC	P20S3
		BANK

		EBANK=	LOSCOUNT
		COUNT*	$$/LSR22
LSR22.3		CALL
			GRP2PC
		BON	SET
			SURFFLAG	# ARE WE ON LUNAR SURFACE
			LSR22.4		# YES
			DMENFLG
		BOFF	CALL
			VEHUPFLG
			DOLEM
			INTSTALL
		CLEAR	CALL		# LM PRECISION INTEGRATION
			VINTFLAG
			SETIFLGS
		CALL
			INTGRCAL
		CALL
			GRP2PC
		CALL
			INTSTALL
		CLEAR	BOFF
			DIM0FLAG
			RENDWFLG
			NOTWCSM
		SET	SET		# CSM WITH W-MATRIX INTEGRATION
			DIM0FLAG
			D6OR9FLG
NOTWCSM		SET	CLEAR
			VINTFLAG
			INTYPFLG
		SET	CALL
			STATEFLG
			INTGRCAL
		GOTO
			MARKTEST
DOLEM		CALL
			INTSTALL
		SET	CALL
			VINTFLAG
			SETIFLGS
		CALL
			INTGRCAL
# Page 576
		CALL
			GRP2PC
		CALL
			INTSTALL
		CLEAR	BOFF
			DIM0FLAG
			RENDWFLG
			NOTWLEM
		SET	SET		# LM WITH W-MATRIX INTEGRATION
			DIM0FLAG
			D6OR9FLG
NOTWLEM		CLEAR	CLEAR
			INTYPFLG
			VINTFLAG
		SET	CALL
			STATEFLG
			INTGRCAL
MARKTEST	BON	CALL		# HAS W-MATRIX BEEN INVALIDATED
			RENDWFLG	# HAS W-MATRIX BEEN INVALIDATED
			RANGEBQ
			WLINIT		# YES -- REINITIALIZE
RANGEBQ		BON	EXIT		# DON'T CALL R65 IF ON SURFACE
			SURFFLAG
			RANGEBQ1
		CA	ZERO
		TS	R65CNTR
		TC	BANKCALL
		CADR	R65LEM
		TC	INTPRET
RANGEBQ1	AXT,2	BON		# CLEAR X2
			0
			LMOONFLG	# IS MOON SPHERE OF INFLUENCE
			SETX2		# YES.  STORE ZERO IN SCALSHFT REGISTER
		INCR,2
			2
SETX2		SXA,2	CALL
			SCALSHFT	# 0 -- MOON.  2 -- EARTH.
			GRP2PC
		AXT,1	SXA,1		# STORE RANGE CODE (1) FOR R3 IN NOUN 49
			1
			WHCHREAD
		SLOAD	SR		# GET SINGLE PRECISION RVARMIN (B-12)
			RVARMIN		# SHIFT TO TRIPLE PRECISION (B-40)
			28D
		RTB
			TPMODE		# AND SAVE IN 20D
		STORE	20D
		CALL			# BEGIN COMPUTING THE B-VECTORS, DELTAQ
			GETULC		# B-VECTORS FOR RANGE
		BON	VCOMP		# B0, COMP. IF LM BEING CORRECTED
# Page 577
			VEHUPFLG
			+1
		STOVL	BVECTOR
			ZEROVECS
		STORE	BVECTOR +6	# B1
		STODL	BVECTOR +12D	# B2
			36D
		SRR*	BDSU
			2,2		# SHIFT FROM EARTH/MOON SPHERE TO B-29
			RM		# RM - (MAGNITUDE RCSM-RLM)
		SLR*
			2,2		# SHIFT TO EARTH/MOON SPHERE
		STODL	DELTAQ		# EARTH B-29.  MOON B-27
			36D		# RLC B-29/B-27
		NORM	DSQ		# NORMALIZE AND SQUARE
			X1
		DMP	SR*
			RANGEVAR	# MULTIPLY BY RANGEVAR (B12) THEN
			0 -2,1		# UNNORMALIZE
		SR*	SR*
			0,1
			0,2
		SR*	RTB
			0,2
			TPMODE
		STORE	VARIANCE	# B-40
		DCOMP	TAD
			20D		# B-40
		BMN	TLOAD
			QOK
			20D		# B-40
		STORE	VARIANCE
QOK		CALL
			LGCUPDTE

		SSP	CALL
			WHCHREAD
		DEC	2		# STORE R-RATE CODE (2) FOR R3 IN NOUN 49
			GRP2PC
		CALL			# B-VECTOR, DELTAQ FOR RANGE RATE
			GETULC
		PDDL	SR*		# GET RLC SCALED B-29/B-27
			36D		# AND SHIFT TO B-23
			0 -4,2
		STOVL	36D		# THEN STORE BACK IN 36D
		BON	VCOMP		# B1, COMP. IF LM BEING CORRECTED
			VEHUPFLG
			+1
		VXSC
			36D		# B1 = RLC (B-24/B-22)
# Page 578
		STOVL	BVECTOR +6
			NUVLEM
		VSR*	VAD
			6,2		# SHIFT FOR EARTH/MOON SPHERE
			VCVLEM		# EARTH B-7. MOON B-5
		PDVL	VSR*		# VL TO PD6
			NUVCSM
			6,2		# SHIFT FOR EARTH/MOON SPHERE
		VAD	VSU
			VCVCSM
		PDVL	DOT		# VC - VL = VLC TO PD6
			0
			6
		PUSH	SRR*		# RDOT B-8/B-6 TO PD12
			2,2		# SHIFT FROM EARTH/MOON SPHERE TO B-8
		DSQ	DMPR		# RDOT**2 B-16 X RATEVAR B12
			RATEVAR
		STORE	VARIANCE
		SLOAD	SR
			VVARMIN		# GET SINGLE PRECISION VVARMIN (B+12)
			16D		# SHIFT TO DP (B-4)
		STORE	24D		# AND SAVE IN 24D
		DSU	BMN		# IS MIN. VARIANCE > COMPUTED VARIANCE
			VARIANCE
			VOK		# BRANCH -- NO
		DLOAD			# YES -- USE MINIMUM VARIANCE
			24D
		STORE 	VARIANCE
VOK		DLOAD	SR2		# RDOT (PD12) FROM B-8/B-6
		PDDL	SLR*		# TO B-10/B-8
			RDOTM		# SHIFT TO EARTH/MOON SPHERE
			0 -1,2		# B-7 TO B-10/B-8
		DSU
		DMPR
			36D
		STOVL	DELTAQ		# B-33
			0		# NOW GET B0
		VXV	VXV		# (ULC X VLC) X ULC
		BON	VCOMP		# B0, COMP. IF LM BEING CORRECTED
			VEHUPFLG
			+1
		VSR*
			0 -2,2		# SCALED B-5
		STOVL	BVECTOR
			ZEROVECS
		STORE	20D		# ZERO OUT 20 TO 25 IN PUSHLIST
		STOVL	BVECTOR +12D
			BVECTOR
		ABVAL	NORM		# LOAD B0, GET MAGNITUDE AND NORMALIZE
			20D		# SHIFT COUNT IN 20D
# Page 579
		VLOAD	ABVAL
			BVECTOR +6D	# LOAD B1, GET MAGNITUDE AND NORMALIZE
		NORM	DLOAD
			22D		# SHIFT COUNT IN 22D
			22D		# FIND WHICH SHIFT IS SMALLER
		DSU	BMN		# BRANCH -- B0 HAS A SMALLER SHIFT COUNT
			20D
			VOK1
		LXA,1	GOTO
			22D		# LOAD X2 WITH THE SMALLER SHIFT COUNT
			VOK2
VOK1		LXA,1
			20D
VOK2		VLOAD	VSL*		# THEN ADJUST B0, B1, DELTAQ AND VARIANCE
			BVECTOR		# WITH THI SSHIFT COUNT
			0,1
		STOVL	BVECTOR
			BVECTOR +6
		VSL*
			0,1
		STODL	BVECTOR +6
			DELTAQ
		SL*
			0,1
		STORE	DELTAQ
		DLOAD	SL*		# GET RLC AND ADJUST FOR SCALE SHIFT
			36D
			0 -1,1
		DSQ	DMP		# MULTIPLY RLC**2 BY VARIANCE
			VARIANCE
		SL4	RTB		# SHIFT TO CONFORM TO BVECTORS AND DELTAQ
			TPMODE
		STCALL	VARIANCE	# AND STORE TP VARIANCE
			LGCUPDTE

		CALL
			GRP2PC
		BON	EXIT		# ARE ANGLES TO BE DONE
			SURFFLAG
			RENDEND		# NO
		EBANK=	AIG
MXMYMZ		CAF	AIGBANK
		TS	BBANK
		CA	AIG		# YES, COMPUTE	MX, MY, MZ
		TS	CDUSPOT
		CA	AMG
		TS	CDUSPOT +2
		CA 	AOG
		TS	CDUSPOT +4	# GIMBAL ANGLES NOW IN CDUSPOT FOR TRG*NBSM
		TC	INTPRET
# Page 580
		VLOAD	CALL
			UNITX
			TRG*NBSM
		VXM	VSL1
			REFSMMAT
		STOVL	MX
			UNITY
		CALL
			*NBSM*
		VXM	VSL1
			REFSMMAT
		STOVL	MY
			UNITZ
		CALL
			*NBSM*
		VXM	VSL1
			REFSMMAT
SHAFTBQ		STCALL	MZ
			RADARANG
		SSP	CALL		# STORE SHAFT CODE (3) FOR R3 IN NOUN 49
			WHCHREAD
		DEC	3
			GRP2PC
		VLOAD	DOT		# COMPUTE DELTAQ,B VECTORS FOR SHAFT ANG.
			ULC
			MX
		SL1
		STOVL	SINTH		# 18D
			ULC
		DOT	SL1
			MZ
		STCALL	COSTH		# 16D
			ARCTAN
		BDSU	DMP
			RRSHAFT
			2PI/8
		SL3R	PUSH
		DLOAD	SL3
			X789
		SRR*	BDSU		# SHIFT FROM -5/-3 TO B0
			0,2
		DMP	SRR*
			RXZ
			0,1		# SHIFT TO EARTH/MOON SPHERE
		STOVL	DELTAQ		# EARTH B-29.  MOON B-27
			ULC
		VXV	VSL1
			MY
		UNIT
		BOFF	VCOMP		# B0, COMP. IF CSM BEING CORRECTED
# Page 581
			VEHUPFLG
			+1
		STOVL	BVECTOR
			ZEROVECS
		STORE	BVECTOR +6
		STODL	BVECTOR +12D
			RXZ
		SR*	SRR*		# SHIFT FROM EARTH/MOON SPHERE TO B-25
			0 -2,1
			0,2
		STORE	BVECTOR +12D
		SLOAD
			SHAFTVAR
		DAD	DMP
			IMUVAR		# RAD**2 B12
			RXZ
		SRR*	DMP
			0,1		# SHIFT TO EARTH/MOON SPHERE
			RXZ
		SR*	SR*
			0 -2,1
			0,2
		SR*	RTB
			0,2
			TPMODE		# STORE VARIANCE TRIPLE PRECISION
		STCALL	VARIANCE	# B-40
			LGCUPDTE

		CALL
			GRP2PC
TRUNBQ		CALL
			RADARANG
		SSP	CALL		# STORE TRUNNION CODE (4) FOR R3 IN N49
			WHCHREAD
		DEC	4
			GRP2PC
		VLOAD	VXV
			ULC
			MY
		VSL1	VXV
			ULC
		VSL1			# (ULC X MY) X ULC
		BOFF	VCOMP		# B0, COMP. IF CSM BEING CORRECTED
			VEHUPFLG
			+1
		STOVL	BVECTOR
			ZEROVECS
		STORE	BVECTOR +6
		STODL	BVECTOR +12D
			RXZ
# Page 582
		SR*	SRR*		# SHIFT FROM EARTH/MOON SPHERE TO B-25
			0 -2,1
			0,2
		STORE	BVECTOR +14D
		SLOAD
			TRUNVAR
		DAD	DMP
			IMUVAR
			RXZ
		SRR*	DMP
			0,1		# SHIFT TO EARTH/MOON SPHERE
			RXZ
		SR*	SR*
			0 -2,1
			0,2
		SR*	RTB
			0,2
			TPMODE		# STORE VARIANCE TRIPLE PRECISION
		STODL	VARIANCE
			SINTHETA
		ASIN	BDSU		# SIN THETA IN PD6
			RRTRUN
		DMP	SL3R
			2PI/8
		PDDL	SL3
			X789 +2
		SRR*	BDSU		# SHIFT FROM -5/-3 TO B0
			0,2
		DMP	SRR*
			RXZ
			0,1
		STCALL	DELTAQ		# EARTH B-29.  MOON B-27
			LGCUPDTE
		CALL
			GRP2PC
RENDEND		GOTO
			R22LEM93

# FUNCTIONAL DESCRIPTION:
#	LSR22.4 IS THE ENTRY TO PERFORM LUNAR SURFACE NAVIGATION FOR THE LM
#	COMPUTER ONLY.  THIS ROUTINE COMPUTES THE BE-VECTORS AND DELTA Q FOR RANGE
#	AND RANGE RATE MEASURED BY THE RENDEZVOUS RADAR
#
# SUBROUTINES CALLED:
#	INTSTALL	LGCUPDTE	INCORP1		RP-TO-R
#	INTEGRV		GETULC		INCORP2
#
# OUTPUT
#	CORRECTED CSM STATE VECTOR (PERMANENT)
#	NUMBER OF MARKS INCORPORATED IN MARKCTR
# Page 583
#	MAGNITUDE OF POSITION DEVIATION (FOR DISPLAY) IN R22 DISP METERS B-29
# 	MAGNITUDE OF VELOCITY DEVIATION (FOR DISPLAY) IN R22DISP +2 M/CSEC B-7
# 	UPDATED W-MATRIX

# ERASABLE INITIALIZATION REQUIRED
#	LM AND CSM STATE VECTORS
#	W-MATRIX
#	MARK TIME IN MKTIME
#	RADAR RANGE IN RM METERS B-29
#	RANGE RATE IN RDOTM METERS/CSEC B-7
#	VEHUPFLG

LSR22.4		CALL
			INTSTALL
		SET	CLEAR
			STATEFLG
			VINTFLAG	# CALL TO GET LM POS + VEL IN REF COORD.
		CALL
			INTGRCAL
		CALL
			GRP2PC
		CLEAR	CALL
			DMENFLG		# SET MATRIX SIZE TO 6X6 FOR INCORP
			INTSTALL
		DLOAD	BHIZ		# IS THIS FIRST TIME THROUGH
			MARKCTR
			INITWMX6	# YES, INITIALIZE 6X6 W-MATRIX
		CLEAR	SET
			D6OR9FLG
			DIM0FLAG
		SET	CLEAR
			VINTFLAG
			INTYPFLG
		CALL
			INTGRCAL
		GOTO
			RANGEBQ

INITWMX6	CALL
			WLINIT		# INITIALIZE W-MATRIX
		SET	CALL
			VINTFLAG
			SETIFLGS
		CALL
			INTGRCAL
		GOTO
			RANGEBQ

# THIS ROUTINE CLEARS RFINAL (DP) AND CALLS INTEGRV
# Page 584
INTGRCAL	STQ	DLOAD
			IGRET
			MKTIME
		STCALL	TDEC1
			INTEGRV
		GOTO
			IGRET

# THIS ROUTINE INITIALIZES THE W-MATRIX BY ZEROING ALL W THEN SETTING
# DIAGONAL ELEMENTS TO INITIAL STORED VALUES.

		EBANK=	W
WLINIT		EXIT
		CAF	WBANK
		TS	BBANK
		CAF	WSIZE
		TS	W.IND
		CAF	ZERO
		INDEX	W.IND
		TS	W
		CCS	W.IND
		TC	-5
		CAF	AIGBANK		# RESTORE EBANK 7
		TS	BBANK
		TC	INTPRET
		BON	SLOAD		# IF ON LUNAR SURFACE, INITIALIZE WITH
			SURFFLAG	# WSURFPOS AND WSURFVEL INSTEAD OF
			WLSRFPOS	# WRENDPOS AND WRENDVEL
			WRENDPOS
		GOTO
			WPOSTORE
WLSRFPOS	SLOAD
			WSURFPOS
WPOSTORE	SR			# SHIFT TO B-19 SCALE
			5
		STORE	W
		STORE	W +8D
		STORE	W +16D
		BON	SLOAD
			SURFFLAG
			WLSRFVEL
			WRENDVEL
		GOTO
			WVELSTOR
WLSRFVEL	SLOAD
			WSURFVEL
WVELSTOR	STORE	W +72D
		STORE	W +80D
		STORE	W +88D
		SLOAD
# Page 585
			WSHAFT
		STORE	W +144D
		SLOAD
			WTRUN
		STORE	W +152D
		SET	SSP		# SET RENDWFLG -- W-MATRIX VALID
			RENDWFLG
			MARKCTR		# SET MARK COUNTER EQUAL ZERO
			0
		RVQ

		EBANK=	W
WBANK		BBCON	WLINIT
		EBANK=	AIG
AIGBANK		BBCON	LSR22.3

# GETULC
#
# THIS SUBROUTINE COMPUTES THE RELATIVE POSITION VECTOR BETWEEN THE CSM
# AND THE LM, LEAVING THE UNIT VECTOR IN THE PUSHLIST AND MPAC AND THE
# MAGNITUDE IN 36D.

GETULC		SETPD	VLOAD
			0
			DELTALEM
		LXA,2
			SCALSHFT	# LOAD X2 WITH SCALE SHIFT
		VSR*	VAD
			9D,2		# SHIFT FOR EARTH/MOON SPHERE
			RCVLEM
		PDVL	VSR*
			DELTACSM
			9D,2		# SHIFT FOR EARTH/MOON SPHERE
		VAD	VSU
			RCVCSM
		RTB	PUSH		# USE NORMUNIT TO PRESERVE ACCURACY
			NORMUNX1
		STODL	ULC
			36D
		SL*			# ADJUST MAGNITUDE FROM NORMUNIT
			0,1
		STOVL	36D		# ULC IN PD0 AND MPAC,RLC IN 36D
			ULC
		RVQ

# RADARANG
#
# THIS SUBROUTINE COMPUTS SINTHETA = -ULC DOT MY
# RXZ = (SQRT (1-SINTHETA**2))RLC
# OUTPUT
#	ULC IN ULC, PD0
# Page 586
#	RLC IN PD36D
#	SIN THETA IN SINTHETA AND PD6
#	RXZ NORM IN RXZ (N IN X1)

RADARANG	STQ	CALL
			RDRET
			GETULC
		VCOMP	DOT
			MY
		SL1R	PUSH		# SIN THETA TO PD6
		STORE	SINTHETA
		DSQ	BDSU
			DP1/4TH		# 1-(SIN THETA)**2
		SQRT	DMP
			36D
		SL1	NORM
			X1		# SET SHIFT COUNTER IN X1
		STORE	RXZ
		GOTO			# EXIT
			RDRET
LGCUPDTE	STQ	CALL
			LGRET
			INCORP1
		VLOAD	ABVAL
			DELTAX +6
		LXA,2	SRR*
			SCALSHFT	# 0 -- MOON.  2 -- EARTH
			2,2		# SET VEL DISPLAY TO B-7
		STOVL	R22DISP +2
			DELTAX
		ABVAL	SRR*
			2,2		# SET POS DISPLAY TO B-29
		STORE	R22DISP
		SLOAD	SR
			RMAX
			10D
		DSU	BMN
			R22DISP
			R22LEM96	# GO DISPLAY
		SLOAD	DSU
			VMAX
			R22DISP +2	# VMAX MINUS VEL. DEVIATION
		BMN
			R22LEM96	# GO DISPLAY
ASTOK		CALL
			INCORP2
		GOTO
			LGRET
IMUVAR		2DEC	E-6 B12		# RAD**2

WSIZE		DEC	161
# Page 587
2PI/8		2DEC	3.141592653 B-2

		EBANK=	LOSCOUNT
# Page 588

# PROGRAM NAME LRS24.1		RR SEARCH ROUTINE
# MCD NO. 0			BY P. VOLANTE, SDC		DATE 1-15-67
#
# FUNCTIONAL DESCRIPTION
#
# DRIVES THE RENDEZVOUS RADAR IN A HEXAGONAL SEARCH PATTERN ABOUT THE LOS TO THE CSM (COMPUTED FROM THE CSM AND LM
# STATE VECTORS) CHECKING FOR THE DATA GOOD DISCRETE AND MONITORING THE ANGLE BETWEEN THE RADAR BORESIGHT AND THE
# LM +Z AXIS.  IF THIS ANGLE EXCEEDS 30 DEGREES THE PREFERRED TRACKING ATTITUDE ROUTINE IS CALLED TO PERFORM AN
# ATTITUDE MANEUVER.
#
# CALLING SEQUENCE -- BANKCALL FOR LRS24.1
#
# SUBROUTINES CALLED
#
#	LEMCONIC	R61LEM
#	CSMCONIC	RRDESSM
#	JOBDELAY	FLAGDOWN
#	WAITLIST	FLAGUP
#	RRNB		BANKCALL
#
# EXIT -- TO ENDOFJOB WHEN THE SEARCH FLAG (SRCHOPT) IS NOT SET
#
# OUTPUT
#
#	DATAGOOD (SP) -- FOR DISPLAY IN R1 --	00000 INDICATES NO LOCKON
#						11111 INDICATES LOCKON ACHIEVED
#	OMEGAD (SP)   -- FOR DISPLAY IN R2 --	ANGLE BETWEEN RR BORESIGNT VECTOR AND THE SPACECRAFT +Z AXIS
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	SEARCH FLAG MUST BE SET
#	LM AND CSM STATE VECTORS AND REFSMMAT MATRIX
#
# DEBRIS
#
#	RLMSRCH		UXVECT
#	VXRLM		UYVECT
#	LOSDESRD	NSRCHPNT
#	DATAGOOD	OMEGAD
#	MPAC		PUSHLIST

		COUNT*	$$/LRS24
LRS24.1		CAF	ZERO
		TS	NSRCHPNT	# SET SEARCH PATTERN POINT COUNTER TO ZERO
CHKSRCH		CAF	BIT14		# ISSUE AUTO TRACK ENABLE TO RADAR
		EXTEND
# Page 589
		WOR	CHAN12
		CAF	SRCHOBIT	# CHECK IF SEARCH STILL REQUESTED
		MASK	FLAGWRD2	# (SRCHOPT FLAG SET)
		EXTEND
		BZF	ENDOFJOB	# NO-TERMINATE JOB

		CAF	6SECONDS	# SCHEDULE TASK TO DRIVE RADAR TO NEXT PT.
		INHINT
		TC	WAITLIST	# IN 6 SECONDS
		EBANK=	LOSCOUNT
		2CADR	CALLDGCH

		RELINT
		CS	RADMODES	# IS REMODE IN PROGRESS
		MASK	REMODBIT
		EXTEND
		BZF	ENDOFJOB	# YES -- WAIT SIX SECONDS
		TC	INTPRET

		RTB	DAD		# COMPUTE LOS AT PRESENT TIME + 1.5 SEC.
			LOADTIME
			1.5SECS
LRS24.11	STCALL	TDEC1
			LEMCONIC	# EXTRAPOLATE LM STATE VECTOR
		VLOAD
			RATT
		STOVL	RLMSRCH		# SAVE LEM POSITION
			VATT
		STODL	SAVLEMV		# SAVE LEM VELOCITY
			TAT
		STCALL	TDEC1		# EXTRAPOLATE CSM STATE VECTOR
			CSMCONIC	# EXTRAPOLATE CSM STATE VECTOR
		VLOAD	VSU		# LOS VECTOR = R(CSM) - R(LM)
			RATT
			RLMSRCH
		UNIT
		STOVL	LOSDESRD	# STORE DESIRED LOS
			VATT		# COMPUTE UNIT(V(CM) CROSS R(CM))
		UNIT	VXV
			RATT
		UNIT
		STORE	VXRCM
		VLOAD	VSU
			VATT
			SAVLEMV
		MXV	VSL1		# CONVERT FROM REFERENCE TO STABLE MEMBER
			REFSMMAT
		STORE	SAVLEMV		# VLC = V(CSM) - V(LM)
		SLOAD	BZE		# CHECK IF N=0
# Page 590
			NSRCHPNT
			DESGLOS		# YES -- DESIGNATE ALONG LOS
		DSU	BZE		# IS N=1
			ONEOCT		# YES -- CALCULATE X AND Y AXES OF
			CALCXY		# SEARCH PATTERN COORDINATE SYSTEM
		VLOAD			# NO -- ROTATE X-Y AXES TO NEXT SEARCH POINT
			UXVECT
		STOVL	UXVECTPR	# SAVE ORIGINAL X AND Y VECTORS
			UYVECT		# UXPRIME = ORIGINAL UX
		STORE	UYVECTPR	# UYPRIME = ORIGINAL UY
		VXSC
			SIN60DEG	# UX = (COS 60)UXPR + (SIN 60)UYPR
		STOVL	UXVECT
			UXVECTPR
		VXSC	VAD
			COS60DEG
			UXVECT
		UNIT
		STOVL	UXVECT
			UXVECTPR	# UY = (-SIN 60)UXPR + (COS 60)UYPR
		VXSC
			SIN60DEG
		STOVL	UYVECT
			UYVECTPR
		VXSC	VSU
			COS60DEG
			UYVECT
		UNIT
		STORE	UYVECT
OFFCALC		VXSC	VAD		# OFFSET VECTOR = K(UY)
			OFFSTFAC	# LOS VECTOR + OFFSET VECTOR DEFINES
			LOSDESRD	# DESIRED POINT IN SEARCH PATTERN
		UNIT	MXV
			REFSMMAT	# CONVERT TO STABLE MEMBER COORDINATES
		VSL1
CONTDESG	STOVL	RRTARGET
			SAVLEMV
		STORE	LOSVEL
		EXIT
		INHINT
		TC	KILLTASK	# KILL ANY PRESENTLY WAITLISTED TASK
		CADR	DESLOOP +2	# WHICH WOULD DESIGNATE TO THE LAST
					# POINT IN THE PATTERN
CONTDES2	CS	CDESBIT
		MASK	RADMODES	# SET BIT 15 OF RADMODES TO INDICATE
		AD	CDESBIT		# A CONTINUOUS DESIGNATE WANTED.
		TS	RADMODES
		TC	INTPRET

		CALL
# Page 591
			RRDESSM		# DESIGNATE RADAR TO RRTARGET VECTOR

		EXIT
		TC	LIMALARM	# LOS NOT IN MODE 2 COVERAGE (P22)
		TC	LIMALARM	# VEHICLE MANEUVER REQUIRED (P20)

					# COMPUTE OMEGA,ANGLE BETWEEN RR LOS AND
					# SPACECRAFT +Z AXIS
OMEGCALC	EXTEND
		DCA	CDUT
		DXCH	TANGNB
		TC	INTPRET
		CALL
			RRNB
		DLOAD	ACOS		# OMEGA IS ARCCOSINE OF Z-COMPONENT OF
			36D		# VECTOR COMPUTED BY RRNB (LEFT AT 32D)
		STORE	OMEGDISP	# STORE FOR DISPLAY IN R2
		EXIT
		TC	ENDOFJOB
# Page 592
# CALCULATE X AND Y VECTORS FOR SEARCH PATTERN COORDINATE SYSTEM.

CALCXY		VLOAD	VXV
			VXRCM
			LOSDESRD
		UNIT
		STOVL	UXVECT		# UX = (VLM X RLM) X LOS
			LOSDESRD
		VXV	UNIT
			UXVECT
		STORE	UYVECT		# UY = LOS X UX
		GOTO
			OFFCALC

DESGLOS		VLOAD	MXV		# WHEN N= 0,DESIGNATE ALONG LOS
			LOSDESRD
			REFSMMAT	# CONVERT LOS FROM REFERENCE TO SM COORDS
		VSL1	GOTO
			CONTDESG

CALLDGCH	CAE	FLAGWRD0	# IS RENDEZVOUS FLAG SET
		MASK	RNDVZBIT
		EXTEND
		BZF	TASKOVER	# NO -- EXIT R24
		CAF	PRIO25		# YES -- SCHEDULE JOB TO DRIVE RADAR TO NEXT
		TC	FINDVAC		# PONT IN SEARCH PATTERN
		EBANK=	RLMSRCH
		2CADR	DATGDCHK

		TC	TASKOVER

DATGDCHK	CAF	BIT4
		EXTEND			# CHECK IF DATA GOOD DISCRETE PRESENT
		RAND	CHAN33
		EXTEND
		BZF	STORE1S		# YES -- GO TO STORE 11111 FOR DISPLAY IN R1
		CS	SIX
		AD	NSRCHPNT	# IS N GREATER THAN 6
		EXTEND
		BZF	LRS24.1		# YES -- RESET N = 0 AND START AROUND AGAIN
		INCR	NSRCHPNT	# NO -- SET N = N+1 AND GO TO
		TCF	CHKSRCH		# NEXT POINT IN PATTERN

STORE1S		CAF	ALL1S		# STORE 11111 FOR DISPLAY IN R1
		TS	DATAGOOD
# Page 593
		INHINT
		TC	KILLTASK	# DELETE DESIGNATE TASK FROM
		CADR	DESLOOP +2	# WAITLIST USING KILLTASK
		TC	ENDOFJOB

LIMALARM	TC	ALARM		# ISSUE ALARM 527 -- LOS NOT IN MODE2
		OCT	527		# COVERAGE IN P22 OR VEHICLE MANEUVER
		INHINT			# REQUIRED IN P20
		TC	KILLTASK	# KILL WAITLIST CALL FOR NEXT
		CADR	CALLDGCH	# POINT IN SEARCH PATTERN
		TC	ENDOFJOB

ALL1S		DEC	11111
SIN60DEG	2DEC	.86603
COS60DEG	=	DPHALF		# (2DEC .50)
UXVECTPR	EQUALS	12D		# PREVIOUS
UYVECTPR	EQUALS	18D
RLMUNIT		EQUALS	12D
OFFSTFAC	2DEC	0.05678		# TANGENT OF 3.25 DEGREES

ONEOCT		OCT	00001		# **** NOTE -- THESE TWO CONSTANTS MUST ****
3SECONDS	2DEC	300		# **** BE IN THIS ORDER BECAUSE         ****

					# **** ONEOCT NEEDS A LOWER ORDER 	****
					# **** WORD OF ZEROES			****
6SECONDS	DEC	600
1.5SECS		2DEC	150

ZERO/SP		EQUALS	HI6ZEROS

		BLOCK	02
		SETLOC	FFTAG5
		BANK
		COUNT*	$$/P20
GOTOV56		EXTEND			# P20 TERMINATES BY GOTOV56 INSTEAD OF
		DCA	VB56CADR	# GOTOPOOH
		TCF	SUPDXCHZ
		EBANK=	WHOCARES
VB56CADR	2CADR	TRMTRACK

# Page 594
# PROGRAM NAME: R29 	(RENDEZVOUS RADAR DESIGNATE DURING POWERED FLIGHT)
# MOD NO. 2	BY H. BLAIR-SMITH	JULY 2, 1968
#
# FUNCTIONAL DESCRIPTION:
#
#	DESIGNATES THE RENDEZVOUS RADAR TOWARD THE COMPUTES LOS TO THE CSM, WITH THE CHIEF OBJECTIVE OF OBTAINING RANGE
#	AND RANGE RATE DATA AT 2-SECOND INTERVALS FOR TRANSMISSION TO THE GROUND.  WHEN THE RR IS WITHIN .5 DEGREE OF
#	THE COMPUTED LOS, TRACKING IS ENABLED, AND DESIGNATION CONTINUES UNTIL THE DATA-GOOD DISCRETE IS RECEIVED.  AT
#	THAT POINT, DESIGNATION CEASES AND A RADAR-READING ROUTINE TAKES OVER, PREPARING A CONSISTENT SET OF DATA FOR
#	DOWN TELEMETRY.  THE SET INCLUDES RANGE, RANGE RATE, MARK TIME, TWO RR CDU ANGLES, THREE IMUCDU ANGLES, AND AN
#	INDICATOR WHICH IS 1 WHEN THE SET IS CONSISTENT AND 0 OTHERWISE.  THE INDICATOR IS IN TRKMKCNT.
#
# CALLING SEQUENCE:  BEGUN EVERY 2 SECONDS AS AN INTEGRAL PART OF SERVICER
#
# SUBROUTINES CALLED:
#
#	REMODE		RRPONLY
#	UNIT		MPACVBUF
#	QUICTRIG	AX*SR*T
#	SPSIN		SPCOS
#	SETRRECR	RROUT
#	RRRDOT		RRRANGE
#
# EXIT:  TO NOR29NOW, IN SERVICER.
#
# OUTPUT:  (ALL FOR DOWNLINK)
#
#	RM		RDOTM		(RAW)
#	AIG		AMG
#	AOG		TRKMKCNT	TRKMKCNT = 00001 IF SET IS CONSISTENT,
#	TANGNB		TANGNB +1	OTHERWISE TRKMKCNT = 00000.
#	MKTIME
# Page 595
#
# ERASABLE INITIALIZATION REQUIRED:
#
#	NOR29FLG	READRFLG		(TO 1 AND 0 BY FRESH START) (RESET NOR29FLG TO LET SERVICER RUN R29)
#	PIPTIME		RADMODES (BIT 10)	(BIT SET TO 0 BY FRESH START)
#	R(CSM)		V(CSM)
#	R		V			(PIPTIME THRU V BY AVE G IN SERVICER)
#
# DEBRIS:
#
#	RADMODES (BIT 10)
#	LOSSM		LOSVDT/4		(= RRTARGET & LOSVEL)
#	SAVECDUT	OLDESFLG		(SAVECDUT = MLOSV)
#	LOSCMFLG	READRFLG
#
# ALARMS:  NONE.
#
# COMPONENT JOBS AND TASKS:
#
#	INITIALIZING, IF RR IS FOUND TO BE IN MODE 1:  JOB R29REMOJ AND TASK REMODE:  ALWAYS: TASK PREPOS29.
#	DESIGNATING:  TASK BEGDES29 & JOB R29DODES.
#	RADAR READING:  TASK R29READ AND JOB R29RDJOB.  ALL JOBS ARE NOVAC TYPE.

		BANK	33
		SETLOC	R29/SERV
		BANK

		COUNT*	$$/r29

NR29&RDR	EQUALS	EBANK5

# Page 596
# SERVICER COMES TO R29 FROM "R29?" IF NOR29FLG, READRFLG, RRREMODE, RRCDUZRO, RRREPOS, AND DISPLAY-INERTIAL-DATA
# ARE ALL RESET, AND THE RR IS IN LGC MODE (OFTEN CONFUSINGLY CALLED AUTO MODE).

R29		CS	RADMODES
		MASK	DESIGBIT
		EXTEND
		BZF	R29.LOS		# BRANCH IF DESIGNATION IS ALREADY ON.

		INHINT
		ADS	RADMODES	# SHOW THAT DESIGNATION IS NOW ON.
		CS	BIT14
		EXTEND
		WAND	CHAN12		# REMOVE RR TRACK ENABLE DISCRETE.
		CS	LOSCMBIT
		MASK	FLAGWRD2
		TS	FLAGWRD2	# CLEAR LOSCMFLG TO SHOW DES. LOOP IS OFF.
		CS	OLDESBIT
		MASK	STATE
		TS	STATE		# SHOW THAT DES. LOOP IS NOT REQUESTED.
		TC	BANKCALL
		CADR	SETRRECR	# ENABLE RR ERROR COUNTERS.
		CA	ANTENBIT
		MASK	RADMODES
		CCS	A		# TEST RR MODE BIT.
		TCF	SETPRPOS	# MODE 2.

		CA	PRIO21		# MODE 1:  MUST REMODE.
		TC	NOVAC
		EBANK=	LOSCOUNT
		2CADR	R29REM0J	# NEEDS OWN JOB TO RADSTALL IN.

		CS	DESIGBIT
		MASK	RADMODES	# CLEAR DESIGNATE FLAG IN RADMODES
		TS	RADMODES	# BEFORE CALLING REMODE
		CA	REMODBIT
		ADS	RADMODES	# SHOW THAT REMODING IS ON.
		TCF	NOR29NOW	# CONTINUE SERVICER FUNCTIONS.

SETPRPOS	CA	ONE
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	PREPOS29	# TASK TO SET TRUNNION ANGLE TO 180 DEG.

		CA	REPOSBIT
		ADS	RADMODES	# SHOW THAT REPOSITIONING IS ON.
		TCF	NOR29NOW

# Page 597
# FORCE RENDEZVOUS RADAR INTO MODE 2.

R29REM0J	CA	ONE
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	REMODE		# REMODE MUST RUN AS A TASK.

		TC	BANKCALL	# WAIT FOR END OF REMODING
		CADR	RADSTALL

		TCF	ENDOFJOB	# BAD EXIT CAN'T HAPPEN.
		TCF	ENDOFJOB

# TASK TO PREPOSITION THE RR TRUNNION ANGLE TO -180 DEG.

		SETLOC	R29S1
		BANK

PREPOS29	CA	NEGMAX		# -180 DEG.
		TC	RRTONLY		# DRIVE TRUNNION CDU.
		CS	REPOSBIT	# SHOW THAT REPOSITIONING IS OFF.
		MASK	RADMODES
		TS	RADMODES
		TCF	TASKOVER

# COMPUTE THE LINE-OF-SIGHT AND LOS VELOCITY, AND PASS THEM TO THE R29DODES LOOP.

		SETLOC	R29
		BANK

R29.LOS		EXTEND
		DCS	PIPTIME
		DXCH	MPAC
		EXTEND
		DCA	TIME2
		DAS	MPAC		# (MPAC) = T-PIPTIME, SCALED B-28.
		TS	MODE		# SET MODE TO DOUBLE PRECISION.
		CA	MPAC +1
		EXTEND
		MP	BIT12
		DXCH	MPAC		# T-PIPTIME NOW SCALED B-17.
		TC	INTPRET
# Page 598
# LOSCMFLG = 0 MEANS THAT THE DESIGNATION IS READY FOR NEW DATA.  SETTING LOSCMFLG MAKES IT GO AWAY SO SETUP29D CAN
# START IT UP WHEN THE DATA IS IN PLACE.

		PDVL	VSU		# PUSH DOWN T-PIPTIME
			V(CSM)
			V		# LOSVEL = V(CSM) - V
		PDDL	VXSC		# SWAP LOSVEL FOR T-PIPTIME, MULTIPLY THEM
		VAD	VSU		# 	AND ADD THE RESULT TO R(CSM) - R TO GET
			R(CSM)		# 	AN UP-TO-DATE LOS VECTOR IN SM AXES.
			R
		BOFSET	EXIT		# (BOFSET DOES ITS THING INHINTED.)
			LOSCMFLG	# IF DESIGNATE LOOP IS OFF, CHANGE LOSCM-
			SETUP29D	# FLG TO ON AND GO TO SET UP NEW DATA.
		TCF	NOR29NOW	# IF DES. LOOP IS ON, LET IT USE OLD DATA.

SETUP29D	STOVL	LOSSM		# LINE-OF-SIGHT VECTOR, STABLE MEMBER AXES
			0
		VXSC
			.5SECB17
		STORE	LOSVDT/4	# 1/2 SECOND'S WORTH OF LOS VELOCITY.
		CLEAR	EXIT
			LOSCMFLG	# LET R29DLOOP USE NEW DATA.

		CS	STATE
		MASK	OLDESBIT
		EXTEND
		BZF	NOR29NOW	# BRANCH IF R29 DES. LOOP IS REQUESTED.
		INHINT
		ADS	STATE		# OTHERWISE REQUEST IT NOW.

		CCS	PIPCTR		# SEE IF TASK SHOULD BE OFFSET ONE SECOND.
		CS	SUPER110	# -96D +100D = 4.
		AD	1SEC		# 0 +100D = 100D.
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	BEGDES29	# START BEGDES29 TASK ASAP.

		TCF	NOR29NOW	# RELINT AND CONTINUE SERVICER FUNCTIONS.

.5SECB17	2DEC	50 B-17

# Page 599
# R29 DESIGNATE JOB AND TASK MACHINERY.  TASK RECURS EVERY .5 SEC UNTIL DESIGNATE IS CALLED OFF; IT MAY WAIT FOR A
# CENTISECOND OR TWO IF IT COMES UP WHILE SETUP29D IS SUPPLYING NEW DATA.

		BANK	24
		SETLOC	P20S
		BANK

		COUNT*	$$/R29

BEGDES29	CAF	PRIO21
		TC	NOVAC
		EBANK=	LOSVDT/4
		2CADR	R29DODES	# START R29DODES JOB TWICE A SECOND.

R29DLOOP	CAF	.5SEC
		TC	VARDELAY

		CS	RADMODES
		MASK	DESIGBIT
		CCS	A
		TCF	TASKOVER	# QUIT IF DESIGNATION IS CALLED OFF.

		CS	FLAGWRD2
		MASK	LOSCMBIT
		EXTEND
		BZF	+3		# BRANCH IF SETUP29D'S SUPPLYING NEW DATA.
		ADS	FLAGWRD2	# SET LOSCMFLG:  SHOW THAT DES. LOOP IS ON.
		TCF	BEGDES29

		CA	ONE
		TCF	R29DLOOP +1	# WAIT A CENTISECOND FOR NEW DATA.
# Page 600
# R29DODES:  RR DESIGNATION LOOP FOR R29
#
# THIS ROUTINE DOES MUCH THE SAME THING AS DODES, BUT A GREAT DEAL FASTER.  IT TAKES THE NON-UNITIZED LOS VECTOR
# IN STABLE MEMBER COORDINATES (LOSSM) AND A DELTA-LOS IN SM AXES (LOSVDT/4) WHICH IS 1/2 SEC TIMES LOS VELOCITY,
# AND DEVELOPS THE SHAFT AND TRUNNION COMMANDS USING SINGLE PRECISION AS MUCH AS POSSIBLE, AND INTERPRETIVE NOT AT
# ALL.  THE UNIT(LOSM + LOSVEL * 1 SEC) IS COMPUTED IN DP AND TRANSFORMED TO NAV BASE COORDINATES IN DOUBLE PRE-
# CISION (USING SP SINES AND COSINES OF CDU ANGLES), AND THE REST IS DONE IN SP.
#
# THE FUNCTIONAL DIFFERENCE IS THAT R29DODES ALWAYS CLEARS LOSCMFLG WHEN IT ENDS, AND IT STARTS UP THE R29READ
# TASK WHEN LOCK-ON IS ACHIEVED.

		BANK	32
		SETLOC	F2DPS*32
		BANK

		COUNT*	$$/R29
		EBANK=	LOSVDT/4

R29DODES	CA	ONE
		TS	TANG		# INDICATE 1ST PASS THRU VECTOR LOOP.
		CA	FIVE

R29DVBEG	CCS	A		# COUNT DOWN BY TWO'S IN VECTOR LOOP.
		TS	Q
		CCS	TANG
		TCF	R29DPAS1	# DO THIS ON 1ST PASS THRU LOOP.

		EXTEND			# (A "PASS" HERE MEANS 3 TIMES AROUND).
		INDEX	Q
		DCA	LOSVDT/4
		INDEX	Q
		DAS	LOSSM		# ADVANCE LOS VECTOR 1/2 SECOND.

R29DPAS1	EXTEND
		INDEX	Q
		DCA	LOSSM
		INDEX	Q		# MOVE CURRENT LOS (1ST PASS) OR LOS PRO-
		DXCH	MPAC +1		# JECTED 1/2 SEC AHEAD (2ND PASS).
		CCS	TANG
		TCF	R29DVEND	# BUG OUT HERE IN 1ST PASS.

		EXTEND
		INDEX	Q
		DCA	LOSVDT/4
		INDEX	Q
		DAS	MPAC +1		# PROJECT LOS 1 SECOND AHEAD (2ND PASS).

R29DVEND	CCS	Q
		TCF	R29DVBEG	# BRANCH TO CONTINUE VECTOR LOOP.

# Page 601
# UNITIZE AND TRANSFORM TO NAV BASE AXES THE PRESENT LOS (1ST PASS) OR THE 1-SEC PROJECTED LOS (2ND PASS).

		DXCH	MPAC +1
		DXCH	MPAC
		CA	R29FXLOC	# = ADRES INTB15 + -34D
		TS	FIXLOC
		TC	USPRCADR	# WITH FIXLOC ARMED FOR LENGTH AND LENGTH
		CADR	UNIT		# SQUARED, BORROW UNITIZING ROUTINE.
		TC	MPACVBUF	# MOVE UNIT(LOS) TO AX*SR*T ARG AREA.

		CCS	TANG
		TCF	+2
		TCF	GOTANGLS	# GET CDU ANGLES ONLY AFTER 1ST PASS.
		INHINT			# ENSURE CONSISTENT CDU READINGS.
		EXTEND
		DCA	CDUT
		DXCH	SAVECDUT	# TRUNNION AND SHAFT ANGLES.
		CA	CDUY
		TS	CDUSPOT
		CA	CDUZ
		TS	CDUSPOT +2
		CA	CDUX
		TS	CDUSPOT +4	# CDU ANGLES IN FUNNY ORDER FOR AX*SR*T.
		TC	BANKCALL
		CADR	QUICTRIG	# GET SINES AND COSINES OF CDU ANGLES.

GOTANGLS	CS	THREE
		TC	BANKCALL
		CADR	AX*SR*T		# TRANSFORM UNIT LOS TO NB AXES (ULOSNB).

		CCS	TANG
		TCF	+2
		TCF	R29DPAS2	# GO TO RR COMMAND COMP. AFTER 2ND PASS.

# Page 602
# COMPUTE COSINE OF THE ANGLE BETWEEN THE PRESENT LOS AND THE RR BORESIGHT VECTOR, AND SET THE SELFTRACK ENABLE IF
# THE COSINE IS APPROXIMATELY COS(.5 DEG) OR GREATER (I.E., SMALLER ANGLE).

		INHINT
		TS	TANG		# INDICATE 2ND PASS THRU VECTOR LOOP.
		CA	SAVECDUT
		TC	SPCOS
		TS	PUSHLOC		# PUSHLOC = COS T.
		CS	SAVECDUT
		TC	SPSIN
		TS	MODE		# MODE = -SIN T.
		EXTEND
		MP	VBUF +2		# FORM - SIN T ULOSNBY.
		DXCH	MPAC
		CA	SAVECDUT +1
		TC	SPSIN
		TS	SAVECDUT	# SAVECDUT NOW = SIN S.
		EXTEND
		MP	PUSHLOC
		EXTEND
		MP	VBUF		# FORM SIN S COS T ULOSNBX.
		DAS	MPAC
		CA	SAVECDUT +1
		TC	SPCOS
		TS	SAVECDUT +1	# SAVECDUT +1 NOW = COS S.
		EXTEND
		MP	PUSHLOC
		EXTEND
		MP	VBUF +4		# FORM COS S COS T ULOSNBZ.
		DAS	MPAC		# COS(ERROR) = ULOSNB . (SIN S COS T,
		EXTEND			# -SIN T, COS S COS T).
		DCA	MPAC
TESTCOS		DAS	MPAC		# (ULOSNB IN VBUF WAS A HALF-UNIT VECTOR).
		CCS	A		# TEST FOR + OVERFLOW, NONE, OR MINUS.
		CA	BIT14
		NOOP
		EXTEND
		WOR	CHAN12		# IF PLUS OVERFLOW, SET SELFTRACK ENABLE.
		RELINT
		TCF	R29DVBEG -1	# MAKE 2ND PASS THRU VECTOR LOOP.

# Page 603
# COMPUTE SHAFT AND TRUNNION COMMANDS TO NULL HAVE THE ERROR IN HALF A SECOND.

R29DPAS2	CA	SAVECDUT +1
		EXTEND
		MP	VBUF		# FORM COS S ULOSNB'X.
		DXCH	TANG
		CS	SAVECDUT
		EXTEND
		MP	VBUF +4		# FORM - SIN S ULOSNB'Z.
		DAS	TANG		# RAW SHAFT CMD = ULOSNB' . (COS S, 0,
		CS	MODE		# - SIN S)
		EXTEND
		MP	SAVECDUT
		EXTEND
		MP	VBUF		# FORM SIN T SIN S ULOSNB'X.
		DXCH	MPAC
		CA	PUSHLOC
		EXTEND
		MP	VBUF +2		# FORM COS T ULOSNB'Y.
		DAS	MPAC
		CS	MODE
		EXTEND
		MP	SAVECDUT +1
		EXTEND
		MP	VBUF +4		# FORM SIN T COS S ULOSNB'Z.
		DAS	MPAC		# RAW TRUNNION CMD = ULOSNB'.
		CA	MPAC		# (SIN S SIN T, COS T, SIN S COS T).
		EXTEND
		MP	RR29GAIN
		XCH	TANG		# STORE REFINED T CMD, GET RAW S CMD.
		EXTEND
		MP	RR29GAIN
		TS	TANG +1		# STORE REFINED S CMD.

# Page 604
# WHETHER OR NOT TRACKING WAS ENABLED THIS TIME, CHECK ON RR DATA-GOOD.  IF PRESENT, STOP DESIGNATING AND START
# READING DATA FROM THE RENDEZVOUS RADAR.

DGOOD?		CAF	BIT4
		EXTEND
		RAND	CHAN33		# GET RR DATA-GOOD BIT.
		INHINT			# (MAINLY FOR RROUT).
		EXTEND
		BZF	R29LOKON	# BRANCH IF DATA-GOOD IS PRESENT.

		TC	BANKCALL
		CADR	RROUT		# DATA-GOOD IS ABSENT, SO SEND COMMANDS.
		TCF	END29DOD

R29LOKON	CS	DESIGBIT
		MASK	RADMODES
		TS	RADMODES	# SHOW THAT DESIGNATION IS OVER.
		CS	BIT2
		EXTEND
		WAND	CHAN12		# DISABLE RR ERROR COUNTERS.
		CA	READRBIT
		ADS	FLAGWRD3	# SHOW THAT READING HAS BEEN REQUESTED.
		CCS	PIPCTR		# SEE IF TASK SHOULD BE OFFSET 1 SEC.
		CS	SUPER110	# -96D + 100D = 4.
		AD	1SEC		# 0 + 100D = 100D.
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	R29READ		# START READING TASK AND JOB.

END29DOD	CS	LOSCMBIT
		MASK	FLAGWRD2
		TS	FLAGWRD2	# ALWAYS CLEAR LOSCMFLG.
		TCF	ENDOFJOB

R29FXLOC	ADRES	INTB15+ -34D
RR29GAIN	DEC	-.53624
LOSVDT/4	EQUALS	LOSVEL
LOSSM		EQUALS	RRTARGET
SAVECDUT	EQUALS 	MLOSV

# Page 605
# RR READING IS SET UP BY R29DODES WHEN IT DETECTS RR LOCK-ON

		BANK	24
		SETLOC	P20S
		BANK

		COUNT*	$$/R29

		EBANK=	LOSCOUNT

R29READ		CAF	PRIO26		# CALLED BY WAITLIST
		TC	NOVAC
		EBANK=	LOSCOUNT
		2CADR	R29RDJOB	# START JOB TO READ AND DOWNLINK FOR R29.

		CA	2SECS
		TC	VARDELAY

		CA	FLAGWRD3	# 2 SECONDS LATER, SEE IF READING IS STILL
		MASK	READRBIT	# ALLOWED (NO TRACKER FAIL ETC.)
		CCS	A
		TCF	R29READ		# IT'S OK:  CALL IT AGAIN.
		TCF	TASKOVER	# IT AIN'T:  WAIT FOR REDESIGNATE.

R29RDJOB	CA	FLAGWRD3	# CALLED VIA NOVAC.
		MASK	NR29FBIT
		CCS	A		# TEST "NOR29FLG".
		TCF	ENDRRD29	# R29 IS NOW OVER, STOP AT ONCE.

		CA	RADMODES
		MASK	AUTOMBIT
		CCS	A		# TEST RR-NOT-IN-AUTO-MODE BIT.
		TCF	ENDRRD29	# ASTRO TOOK RR OUT OF AUTO MODE.

		TC	BANKCALL
		CADR	RRRDOT		# INITIATE READING OF RANGE RATE.
		TC	BANKCALL
		CADR	RADSTALL	# GOT TO SLEEP UNTIL IT'S READY.
		TCF	ENDRRD29	# BAD READ; REDESIGNATE.

# Page 606
# R29 RADAR READING CONTINUED.

		DXCH	TIMEHOLD
		DXCH	MPAC		# TIME OF RR READING, FOR DOWNLINK.
		INHINT			# BE SURE OF 5 CONSISTENT CDU ANGLES.
		EXTEND
		DCA	CDUT
		DXCH	MPAC +2		# RRCDU ANGLES AT RR READ, FOR DOWNLINK.
		EXTEND
		DCA	CDUY
		DXCH	MPAC +4		# MPAC'S 7 WORDS ARE BUFFERED FOR COPYCYCLE.
		CA	CDUX
		TS	MPAC +6		# IMUCDU ANGLES AT RR READ, FOR DOWNLINK.

R29RANGE	TC	BANKCALL
		CADR	RRRANGE		# INITIATE READING OF RR RANGE.
		TC	BANKCALL
		CADR	RADSTALL	# GO TO SLEEP UNTIL IT'S READY.
		TCF	R29RRR?		# BAD READ OR SCALE CHANGE ... WHICH?

		INHINT
		DXCH	DNRRANGE	# COPYCYCLE TO LAY OUT NEW R29 DOWNLINK.
		DXCH	RM
		DXCH	MPAC
		DXCH	MKTIME
		DXCH	MPAC +2
		DXCH	TANGNB
		DXCH	MPAC +4
		DXCH	AIG
		CA	MPAC +6
		TS	AOG
		CA	ONE
		TS	TRKMKCNT	# SHOW THAT DOWNLINK DATA IS CONSISTENT.
		TCF	ENDOFJOB

R29RRR?		CS	FLAGWRD5
		MASK	BIT10
		CCS	A		# WAS IT A SCALE CHANGE (REAL OR PHONY)?
		TCF	ENDRRD29	# NO, A BAD READ; REDESIGNATE.
		TC	DOWNFLAG
		ADRES	RNGSCFLG
		TCF	R29RANGE	# YES; CLEAR FLAG AND READ AGAIN.

ENDRRD29	CA	ZERO		# TROUBLE MADE US COME HERE TO LEAVE THE
		TS	TRKMKCNT	# RR-READING MODE.  DISCREDIT DOWNTEL.
		TC	DOWNFLAG
		ADRES	READRFLG
		CS	BIT14
		EXTEND
# Page 607
		WAND	CHAN12		# REMOVE TRACK-ENABLE DISCRETE.
		TCF	ENDOFJOB

# Page 608
# W-MATRIX MONITOR

		BANK	31
		SETLOC	VB67
		BANK
		COUNT*	$$/EXTVB

		EBANK=	WWPOS

V67CALL		TC	INTPRET
		CALL
			V67WW
		EXIT
		EXTEND			# SAVE THE PRESENT N99 VALUES FOR
		DCA	WWPOS		# COMPARISON AFTER THE DISPLAY
		DXCH	WWBIAS +2
		EXTEND
		DCA	WWVEL
		DXCH	WWBIAS +4
		EXTEND
		DCA	WWBIAS
		DXCH	WWBIAS +6
V06N99DS	CAF	V06N99
		TC	BANKCALL
		CADR	GOXDSPF
		TCF	ENDEXT
		TCF	V6N99PRO
		TCF	V06N99DS
V6N99PRO	ZL
		CA	FIVE
N99LOOP		TS	Q
		INDEX	Q
		CS	WWPOS
		INDEX	Q
		AD	WWPOS +6
		ADS	L
		CCS	Q		# THE SUM OF ALL DIFFERENCES MUST BE ZERO.
		TCF	N99LOOP
		LXCH	A
		EXTEND
		BZF	V06N9933
		TC	UPFLAG
		ADRES	V67FLAG

V06N9933	TC	INTPRET
		BON	EXIT
			V67FLAG
			+2
		TCF	ENDEXT
		DLOAD
# Page 609
			WWPOS
		SL4	SL1
		STODL	0D
			WWVEL
		STODL	2D
			WWBIAS
		SL			# SHIFT FROM NOUN SCALING (B-5) TO
			10D		# INTERNAL SCALING (B+5)
		STORE	4D
		BON	LXA,1
			SURFFLAG
			V67SURF
			0D
		SXA,1	LXA,1
			WRENDPOS
			2D
		SXA,1	GOTO
			WRENDVEL
			V67CLRF
V67SURF		LXA,1	SXA,1
			0D
			WSURFPOS
		LXA,1	SXA,1
			2D
			WSURFVEL
V67CLRF		LXA,1	SXA,1
			4D
			WTRUN
		SXA,1
			WSHAFT
		CLEAR	EXIT
			RENDWFLG
		TCF	ENDEXT
V67WW		STQ	BOV
			S2
			+1
		CLEAR	CALL
			V67FLAG
			INTSTALL
		SSP	DLOAD
			S1
		DEC	6
			ZEROVECS
		STORE	WWPOS
		STORE	WWVEL
		STORE	WWBIAS
		AXT,1
		DEC	54
NXPOSVEL	VLOAD*	VSQ
			W +54D,1
# Page 610
		GOTO
			ADDPOS
V06N99		VN	0699

		SETLOC	VB67A
		BANK
		COUNT*	$$/EXTVB

ADDPOS		DAD
			WWPOS
		STORE	WWPOS
		VLOAD*	VSQ
			W +108D,1
		DAD
			WWVEL
		STORE	WWVEL
		VLOAD*	VSQ
			W +162D,1
		DAD
			WWBIAS
		STORE	WWBIAS
		TIX,1	SQRT
			NXPOSVEL
		SR			# SHIFT FROM INTERNAL SCALING (B+5) TO
			10D		# NOUN SCALING (B-5)
		STODL	WWBIAS
			WWVEL
		SQRT
		STODL	WWVEL
			WWPOS
		SQRT
		STORE	WWPOS
		BOV	GOTO
			+2
			V67XXX
		DLOAD
			DPPOSMAX
		STORE	WWPOS
		STORE	WWVEL
		STORE	WWBIAS
V67XXX		DLOAD	DSU
			WWPOS
			FT99999
		BMN	DLOAD
			+3
			FT99999
		STORE	WWPOS
		LXA,1	SXA,1
			S2
			QPRET
# Page 611
		EXIT
		TC	POSTJUMP
		CADR	INTWAKE

FT99999		2DEC	30479 B-19

# Page 612
		BANK	25
		SETLOC	RADARUPT
		BANK
		COUNT*	$$/RRUPT

		EBANK=	LOSCOUNT

R12LITES	CA	ONE
		MASK 	IMODES33
		CCS	A
		TCF	ISWRETRN

		TC	HLIGHT
		TC	HLIGHT -3
		TCF	ISWRETRN

RADLITES	CA	BIT1
		MASK	IMODES33
		CCS	A
		TC	Q

		CS	BIT5
		AD	ITEMP1
		CCS	A
		CS	ONE
		TCF	VLIGHT

		TCF	RRTRKF

HLIGHT		TS	ITEMP5		# ZERO ITEMP5 FOR H INDEX

		CA	HLITE
		TS	L

		CA	FLGWRD11
		MASK	SCABBIT
		CCS	A
		TCF	ONLITES
		CA	LRALTBIT
BOTHLITS	MASK	RADMODES
		CCS	A
		TCF	ONLITES

		CA	FLGWRD11
		INDEX	ITEMP5
		MASK	HFLSHBIT
		CCS	A
		TCF	RRTRKF
# Page 613
LITIT		EXTEND
		QXCH	ITEMP6
		TC	TRKFLON +1

		EXTEND
		QXCH	ITEMP6
		TCF	RRTRKF


ONLITES		INDEX	ITEMP5
		CS	HFLSHBIT
		MASK	FLGWRD11
		TS	FLGWRD11

		CA	L
		TCF	LITIT
VLIGHT		TS	ITEMP5
		CA	VLITE
		TS	L
		CA	BIT8
		TCF	BOTHLITS

HLITE		EQUALS	BIT5
VLITE		EQUALS	BIT3

# *** END OF LEMP20S .127 ***