Apollo-11/Comanche055/P30-P37.agc

# Copyright:	Public domain.
# Filename:	P30-P37.agc
# Purpose:	Part of the source code for Colossus 2A, AKA Comanche 055.
#		It is part of the source code for the Command Module's (CM)
#		Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler:	yaYUL
# Contact:	Ron Burkey <info@sandroid.org>.
# Website:	www.ibiblio.org/apollo.
# Pages:	635-648
# Mod history:	2009-05-10 RSB	Adapted from the Colossus249/ file
#				of the same name, using Comanche055 page
#				images.
#		2009-05-20 RSB	Corrected BDV -> BOV.
#
# This source code has been transcribed or otherwise adapted from digitized
# images of a hardcopy from the MIT Museum.  The digitization was performed
# by Paul Fjeld, and arranged for by Deborah Douglas of the Museum.  Many
# thanks to both.  The images (with suitable reduction in storage size and
# consequent reduction in image quality as well) are available online at
# www.ibiblio.org/apollo.  If for some reason you find that the images are
# illegible, contact me at info@sandroid.org about getting access to the
# (much) higher-quality images which Paul actually created.
#
# Notations on the hardcopy document read, in part:
#
#	Assemble revision 055 of AGC program Comanche by NASA
#	2021113-051.  10:28 APR. 1, 1969
#
#	This AGC program shall also be referred to as
#			Colossus 2A

# Page 635
		BANK	32

		SETLOC	P30S1
		BANK

		EBANK=	+MGA

		COUNT	35/P34

DISPMGA		STQ	EXIT		# USED IN P30

			RGEXIT
		TC	COMPTGO

DISP45		CAF	V16N45
		TC	BANKCALL
		CADR	GOFLASHR
		TC	GOTOP00H
		TC	END45
		TC	DISP45
P30PHSI		TC	PHASCHNG
		OCT	14
		TCR	ENDOFJOB
END45		TC	INTPRET
		CLEAR	GOTO
			TIMRFLAG
			RGEXIT

COMPTGO		EXTEND			# USED TO COMPUTE TTOGO
		QXCH	PHSPRDT6	# ** GROUP 6 TEMPORARY USED, BEWARE **

		TC	UPFLAG		# SET TIMRFLAG
		ADRES	TIMRFLAG	# BIT 11 FLAG 7
		CAF	ZERO
		TS	NVWORD1

		CAF	ONE
		TC	WAITLIST
		EBANK=	TIG
		2CADR	CLOKTASK

		TC	2PHSCHNG
		OCT	40036		# 6.3SPOT FOR CLOKTASK
		OCT	05024		# GROUP 4 CONTINUES HERE
		OCT	13000

		TC	PHSPRDT6
# Page 636
# PROGRAM DESCRIPTION P30	DATE 3-6-67
# MOD. I BY S. ZELDIN:  TO ADD P31 AND ADAPT P30 FOR P31 USE.	22DEC67
#
# FUNCTIONAL DESCRIPTION
#	P30	(EXTERNAL DELTA-V TARGETING PROGRAM)
#		ACCEPTS ASTRONAUT INPUTS OF TIG,DELV(LV) AND COMPUTES, FOR DISPLAY,
#		APOGEE, PERIGEE, DELV(MAG), MGA ASSOCIATED WITH DESIRED MANEUVER.
#	P31	(GENERAL LAMBERT AIMPOINT GUIDANCE)
#		A GROUND RULE FOR P31 IS THE ANGLE BETWEEN THE TARGET VECTOR AND
#		POSITION VECTOR AT TIG IS NOT 165-195 DEGREES APART
#		BASED ON STORED INPUT OF OFFSET TARGET(B+29) AND DELTA T TRANS, AND
#		ASTRONAUT ENTRY OF TIG, P31 COMPUTES REQUIRED VELOCITY FOR MANEUVER
#		AND, FOR DISPLAY, APOGEE, PERIGEE, DELV(7AG), +MGA ASSOCIATED WITH
#		DESIRED MANEUVER.
#
# THE FOLLOWING SUBROUTINES ARE USED IN P30 AND P31
#	S30.1 (P30 ONLY)
#	S31.1 (P31 ONLY)
#	P30/P31 -- DISPLAYS TIG
#	CNTUP30 -- DISPLAYS DELV(LV)
#	PARAM30 -- DISPLAYS APOGEE, PERIGEE, DELV(MAG), MGA, TIME FROM TIG,
#		   MARKS SINCE LAST THRUSTING MANEUVER
#
# CALLING SEQUENCE VIA JOB FROM V37
#
# EXIT VIA V37 OR GOTOP00H
#
# OUTPUT FOR POWERED FLIGHT
#	VTIG	X
#	RTIG	X	SEE S30.1
#	DELVSIN	X
#	VGDISP
#	RTARG	X
#	TPASS4	X	SEE S31.1
#		X

		COUNT	35/P30

P30		TC	P30/P31
		TC	CNTNUP30
		TC	DOWNFLAG	# RESET UPDATFLG
		ADRES	UPDATFLG	# BIT 7 FLAG 1
		TC	INTPRET
		CALL
			S30.1
		EXIT
		TC	PARAM30
		TC	UPFLAG
# Page 637
		ADRES	XDELVFLG	# SET XDELVFLG BIT 8 FLAG 2
		TCF	GOTOP00H

P31		TC	P30/P31
		TC	DOWNFLAG
		ADRES	UPDATFLG	# RESET UPDATFLG BIT 7 FLAG 1
		TC	DOWNFLAG
		ADRES	NORMSW		# RESET NORMSW BIT 10 FLAG 7
		TC	INTPRET
		CALL
			S31.1
		EXIT
		TC	CNTNUP30
		TC	PARAM30
		TC	DOWNFLAG
		ADRES	XDELVFLG	# BIT 8 FLAG 2.
		TCF	GOTOP00H

P30/P31		XCH	Q
		TS	P30/31RT
		TC	UPFLAG
		ADRES	UPDATFLG	# SET UPDATFLG BIT 7 FLAG 1
		TC	UPFLAG
		ADRES	TRACKFLG	# SET TRACKFLG BIT 5 FLAG 1
		CAF	V06N33		# T OF IGN
		TC	BANKCALL
		CADR	GOFLASHR
		TCF	GOTOP00H
		TC	P30/31RT
		TCF	P30/P31 +4
		TC	PHASCHNG
		OCT	00014
		TC	ENDOFJOB

CNTNUP30	XCH	Q
		TS	P30/RET
		CAF	V06N81
		TC	BANKCALL
		CADR	GOFLASH
		TCF	GOTOP00H
		TC	P30/RET
		TCF	CNTNUP30 +2
PARAM30		XCH	Q
		TS	P30/31RT
		CAF	V06N42
		TC	BANKCALL
		CADR	GOFLASH
		TC	GOTOP00H	# ON TERMINATION GOTOP00H
		TCF	REFTEST		# ON PROCEED GO DO REFTEST
# Page 638
		TCF	PARAM30 +2
REFTEST		CAF	BIT13
		MASK	STATE +3	# REFSMFLAG
		EXTEND
		BZF	NOTSET		# REFSMFLAG =0, THEN BRANCH TO NOTSET
		TC	INTPRET
		VLOAD	PUSH
			DELVSIN
		CALL
			GET+MGA
		GOTO
			FLASHMGA
NOTSET		EXTEND
		DCS	MARSDP
		DXCH	+MGA		# +MGA, +MGA+1 CONTAINS (-00001)
		TC	INTPRET
FLASHMGA	CALL
			DISPMGA
		EXIT
		TC	P30/31RT
MARSDP		OCT	00000		# (00000) (16440) = (+00001)
		OCT	35100
					# ( .01 ) DEGREES IN THE LOW ORDER REGISTER

V06N33		VN	0633
V06N42		VN	0642
V16N35		VN	1635
V06N45		VN	0645

# Page 639
# PROGRAM DESCRIPTION S30.1	DATE 9NOV66
# MOD NO 1			LOG SECTION P30,P37
# MOD BY RAMA AIYAWAR **
# MOD.2 BY S.ZELDIN -- TO CORRECT MOD.1 FOR COLOSSUS		29DEC67
#
# FUNCTIONAL DESCRIPTION
#	BASED ON STORED TARGET PARAMETERS (R OF IGNITION (RTIG), V OF
#	IGNITION (VTIG), TIME OF IGNITION (TIG)), DELV(LV), COMPUTE PERIGEE ALTITUDE
#	APOGEE ALTITUDE AND DELTA-V REQUIRED IN REF. COORDS. (DELVSIN).
#
# CALLING SEQUENCE
#	L	CALL
#	L+1		S30.1
#
# NORMAL EXIT MODE
#	AT L+2 OR CALLING SEQUENCE (GOTO L+2)
#
# SUBROUTINES CALLED
#	THISPREC
#	PERIAPO
#
# ALARM OR ABORT EXIT MODES
#	NONE
#
# ERASABLE INITIALIZATION REQUIRED
#	TIG		TIME OF IGNITION	DP B28CS
#	DELVSLV		SPECIFIED DELTA-V IN LOCAL VERT.
#			COORDS. OF ACTIVE VEHICLE AT
#			TIME OF IGNITION	VCT. B+7 M/CS
#
# OUTPUT
#	RTIG		POSITION AT TIG		VCT. 	B+29 M
#	VTIG		VELOCITY AT TIG		VCT. 	B+7 M
#	HAPO		APOGEE ALT.		DP 	B+29 M
#	HPER		PERIGEE ALT.		DP 	B+29 M
#	DELVSIN		DELVSLV IN REF COORDS	VCT. 	B+7 M/CS
#	VGDISP		MAG. OF DELVSIN		DP 	B+7 M/CS
#
# DEBRIS	QTEMP	TEMP.ERASABLE
#		QPRET, MPAC
#		PUSHLIST

		SETLOC	P30S1A
		BANK

		COUNT	35/S30S

S30.1		STQ	DLOAD
			QTEMP
			TIG		# TIME IGNITION SCALED AT 2(+28)CS
		STCALL	TDEC1
			THISPREC	# ENCKE ROUTINE FOR

		VLOAD	SXA,2
			VATT
			RTX2
		STOVL	VTIG
# Page 640
			RATT
		STORE	RTIG
		STORE	RACT3
		VXV	UNIT
			VTIG
		STCALL	UNRM
			LOMAT
		VLOAD	VXM
			DELVSLV
			0
		VSL1	SXA,1
			RTX1
		STORE	DELVSIN
		ABVAL
		STOVL	VGDISP		# MAG DELV
			RTIG
		PDVL	VAD
			DELVSIN
			VTIG
		CALL
			PERIAPO1
		CALL
			SHIFTR1
		CALL
			MAXCHK
		STODL	HPER		# PERIGEE ALT B+29
			4D
		CALL
			SHIFTR1
		CALL
			MAXCHK
		STCALL	HAPO		# APOGEE ALT B+29
			QTEMP

# Page 641
# S31.1 PROGRAM DESCRIPTION		28DEC67
# MOD.1 BY S.ZELDIN
#
# S31.1 COMPUTES DELV IN REF AND LV COORDS,MAG OF DELV,INTERCEPT TIME,
# APOGEE AND PERIGEE ALT FOR REQUIRED MANEUVER
#
# CALLING SEQUENCE
#	L	CALL
#	L+1		S31.1
#
# NORMAL EXIT MODE
#	AT L +2 OF CALLING SEQUENCE (GOTO L+2)
#
# SUBROUTINES CALLED
#	AGAIN
#	PERIAPO1
#	SHIFTR1
#	MIDGIM
#
# NO ALARM OR ABORT MODES
#
# INPUT
#	DELLT4		DP	+28
#	TIG		DP	+28
#	RTARG		VCT	+29
#
# OUTPUT
#	DELVLVC		VCT	+7
#	VGDISP		DP	+7
#	HAPO		DP	+29
#	HPER		DP	+29
#	TPASS4		DP	+28
#
# DEBRIS -- QTEMP

S31.1		STQ	DLOAD
			QTEMP
			TIG
		STCALL	TDEC1
			AGAIN		# RETURNS RTX2,RTX1,RATT,VATT,VIPRIME
		VLOAD	PDVL		# DELUEET3
			RTIG
			VIPRIME
		CALL
			PERIAPO1
		CALL
			SHIFTR1
		CALL
			MAXCHK
		STODL	HPER		# B29
			4D
		CALL
			SHIFTR1
		CALL
			MAXCHK
		STOVL	HAPO		# B29
# Page 642
			DELVEET3
		STORE	0
		SET	CALL
			AVFLAG
			MIDGIM		# GET DELVLVC B7 FOR DISPLAY
		ABVAL
		STODL	VGDISP		# B+7 FOR DISPLAY
			DELLT4
		DAD
			TIG
		STCALL	TPASS4		# FOR S40.1
			QTEMP

# Page 643
# SUBROUTINE NAME:	DELRSPL		(CONTINUATION OF V 82 IN CSM IF P11 ACTIVE)
# TRANSFERRED COMPLETELY FROM SUNDISK, P30S REV 33.  9 SEPT 67.
# MOD NO: 0	MOD BY: ZELDIN		DATE:
# MOD NO: 1	MOD BY: RR BAIRNSFATHER	DATE: 11 APR 67
# MOD NO: 2	MOD BY: RR BAIRNSFATHER	DATE: 12 MAY 67		ADD UR.RT CALC WHEN BELOW 300K FT
# MOD NO: 2.1	MOD BY: RR BAIRNSFATHER	DATE: 5 JULY 67		FIX ERROR ON MOD. 2
# MOD NO: 3	MOD BY: RR BAIRNSFATHER	DATE: 12 JUL 67		CHANGE SIGN OF DISPLAYED ERROR.
# MOD 4		MOD BY  S.ZELDIN	DATE: 3 APRIL 68	CHANGE EQUATIONS FOR L/D=.16 WHICH REPLA
#
# FUNCTION:	CALCULATE (FOR DISPLAY ON CALL) AN APPROXIMATE MEASURE OF IN-PLANE SPLASH DOWN
#		ERROR.  IF THE FREE-FALL TRANSFER ANGLE TO 300K FT ABOVE PAD RADIUS IS POSITIVE:
#		SPLASH ERROR= -RANGE TO TARGET + FREE-FALL TRANSFER ANGLE + ESTIMATED ENTRY ANGLE.
#		THE TARGET LOCATION AT ESTIMATED TIME OF IMPACT IS USED.  IF THE FREE-FALL TRANSFER
#		ANGLE IS NEGATIVE:  SPASH ERROR= -RANGE TO TARGET.
#		THE PRESENT TARGET LOCATION IS USED.
#
# CALLING SEQUENCE: CALLED AFTER SR30.1 IF IN CSM AND IF P11 OPERATING (UNDER CONTROL OF V82)
#
# SUBROUTINES CALLED:  VGAMCALC, TFF/TRIG, LALOTORV.
#
# EXIT:		RETURN DIRECTLY TO V 82 PROG. AT SPLRET
#
# ERASABLE INITIALIZATION:  LEFT BY SR30.1 AND V82GON1
#
# OUTPUT:	RSP-RREC RANGE IN REVOLUTIONS.  		DSKY DISPLAY IN N. MI.
#
# DEBRIS:	QPRET, PDL0 ... PDL7, PDL10.

# THETA(1)

		BANK	32
		SETLOC	DELRSPL1
		BANK
		COUNT*	$$/P30		# PROGRAMS: P30 EXTERNAL DELTA V

DELRSPL		STORE	8D
		BPL	DSU
			CANTDO		# GONE PAST 300K FT ALT
			1BITDP
		BOV	CALL
			CANTDO		# POSMAX INDICATES NO 300K FT SOLUTION.
			VGAMCALC	# +GAMMA(REV) IN PMAC,V300 MAG(B-7)=PDL 0
		PUSH	CALL
			TFF/TRIG
		CALL
			AUGEKUGL
		PDDL	ACOS		# T ENTRY PDL 6
			CDELF/2
		DAD
			4
GETARG		STOVL	THETA(1)
			LAT(SPL)
		STODL	LAT
			HI6ZEROS
		STODL	ALT		# ALT=0 = LAT +4
			PIPTIME
# Page 644
		BON	DLOAD
			V37FLAG
			+2
			TSTART82
		DSU	DAD
			8D
		CLEAR	CALL
			ERADFLAG
			LALOTORV	# R RECOV. IN ALPHAV AND MPAC

		UNIT	PDVL
			RONE
		UNIT	DOT
		SL1	ARCCOS
		BDSU			# ERROR = THETA EST - THETA TARG
					# NEGATIVE NUMBER SIGNIFIES THAT WILL FALL SHORT.
					# POSITIVE NUMBER SIGNIFIES THAT WILL OVERSHOOT.
			THETA(1)
DELRDONE	STCALL	RSP-RREC	# DOWNRANGE RECOVERY RANGE ERROR	/360
			INTWAKE0
		CALL
			SPLRET
CANTDO		DLOAD	PDDL		# INITIALIZE ERASE TO DOT TARGET AND UR
					# FOR RANGE ANGLE.
			HIDPHALF	# TO PDL 0 FOR DEN INDDV.
			HI6ZEROS
		PUSH			# ZERO TO PDL 2 FOR PHI ENTRY
		STCALL	8D
			GETARG		# GO SET RSP-RREC =0

AUGEKUGL	VLOAD
			X1CON -2
		STODL	X1 -2
			0
		DSU	BMN
			V(21K)
			LOOPSET
		XSU,1	XCHX,2
			S1
			X1
		XCHX,2	DSU
			S1
			V(3K)
		BMN	XCHX,2
			LOOPSET
			S1
		DSU	BMN
			V(4K)
			LOOPSET
		XCHX,2	XCHX,2
# Page 645
			S1
			X1
		DSU	BMN
			V(400)
			LOOPSET
		SXA,1
			S1
LOOPSET		INCR,1	GOTO
		DEC	1
			K1K2LOOP
K2CALC		SXA,1
			S1
K1K2LOOP	DLOAD	DSU*
			0
			V(32K) +1,1
		DMP*	DAD*
			YK1K2 +1,1
			CK1K2 +1,1
		PDDL	TIX,1
			2
			K2CALC
		DSU	BDDV
		PUSH	BOV
			MAXPHI
		BMN	DSU
			MAXPHI
			MAXPHIC
		BPL
			MAXPHI
PHICALC		DLOAD	DSU		# PHI ENTRY PDL 4D
			0
			V(26K)
		BPL	DLOAD
			TGR26
			TLESS26
		DDV
			0
TENT		DMP	RVQ
			4D
TGR26		DLOAD	GOTO
			TGR26CON
			TENT

MAXPHI		DLOAD	PDDL
			MAXPHIC
		GOTO
			PHICALC
MAXPHIC		2DEC	.09259298	# 2000 NM FOR MAXIMUM PHI ENTRY

# Page 646

		COUNT*	$$/P30

					# 		BELOW
					# **** TABLE IS INDEXED. KEEP IN ORDER ***
		2DEC	7.07304526 E-4		# 5500

		2DEC	3.08641975 E-4		# 2400

		2DEC	3.08641975 E-4		# 2400

		2DEC	-8.8888888 E-3		# -3.2

		2DEC	2.7777777 E-3		# 1

CK1K2		2DEC	6.6666666 E-3		# 2.4

		2DEC	0			# 0

		2DEC*	-1.86909989 E-5 B7* 	# -.443

		2DEC	0

		2DEC*	1.11639691 E-3 B7*	# .001225

		2DEC*	9.56911636 E-4 B7*	# .00105

YK1K2		2DEC*	2.59733157 E-4 B7*	# .000285

V(400)		2DEC	1.2192 B-7

V(28K)		2DEC	85.344 B-7

V(3K)		2DEC	9.144 B-7

V(24K)		2DEC	73.152 B-7

		2DEC	85.344 B-7

V(32K)		2DEC	97.536 B-7

V(4K)		2DEC	12.192 B-7

V(21K)		2DEC	64.000 B-7

TLESS26		2DEC*	5.70146688 E7 B-35*	# 8660PHI/V

TGR26CON	2DEC	7.2 E5 B-28		# PHI/3

V(26K)		2DEC	79.248 B-7		# 26000

# Page 647

X1CON		DEC	10

		DEC	8

		DEC	6
					# **** TABLE IS INDEXED.  KEEP IN ORDER ***
					#		ABOVE
# Page 648
# ***** AVFLAG/P *****
#
# SUBROUTINES USED
#
#	UPFLAG
#	DOWNFLAG

		SETLOC	P30SUBS
		BANK
		EBANK=	SUBEXIT
AVFLAGA		EXTEND			# AVFLAG = CSM
		QXCH	SUBEXIT
		TC	DOWNFLAG
		ADRES	AVFLAG		# BIT 5 FLAG 2
		CAF	EBANK7
		TS	EBANK
		EBANK=	ECSTEER
		CAF	BIT13
		TS	ECSTEER		# SET ECSTEER = 1
		CAF	EBANK4
		TS	EBANK
		EBANK=	SUBEXIT
		TC	SUBEXIT
AVFLAGP		EXTEND			# AVFLAG = LEM
		QXCH	SUBEXIT
		TC	UPFLAG
		ADRES	AVFLAG		# BIT 5 FLAG 2
		TC	SUBEXIT
P20FLGON	EXTEND
		QXCH	SUBEXIT
		TC	UPFLAG
		ADRES	TRACKFLG
		TC	UPFLAG
		ADRES	UPDATFLG
		TC	SUBEXIT		# DP B4