Apollo-11/Luminary099/T4RUPT_PROGRAM.agc

# Copyright:    Public domain.
# Filename:     T4RUPT_PROGRAM.agc
# Purpose:      Part of the source code for Luminary 1A build 099.
#               It is part of the source code for the Lunar Module's (LM)
#               Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler:    yaYUL
# Contact:      Hartmuth Gutsche <hgutsche@xplornet.com>.
# Website:      www.ibiblio.org/apollo.
# Pages:        155-189
# Mod history:  2009-05-19 HG   Transcribed from page images.
#		2010-12-31 JL	Fixed page number comment.
#		2011-01-06 JL	Fixed indentation of TNONTEST. Fixed pseudo-label indentation.
#
# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum.  The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum.  Many thanks to both.  The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo.  If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
#       Assemble revision 001 of AGC program LMY99 by NASA 2021112-61
#       16:27 JULY 14, 1969 
# Page 155
		BANK	12
		SETLOC	T4RUP
		BANK
		
		EBANK=	M11
		COUNT*	$$/T4RPT
T4RUPT		TS	BANKRUPT

		EXTEND
		QXCH	QRUPT
		
		CCS	DSRUPTSW	# GOES 7(-1)0 AROUND AND AROUND
		TCF	NORMT4 +1
		TCF	NORMT4
		
		TCF	QUIKDSP
		
NORMT4		CAF	SEVEN
		TS	RUPTREG1
		TS	DSRUPTSW
		
		BLOCK	02
		SETLOC	FFTAG10
		BANK
		
		COUNT*	$$/T4RPT
100MRUPT	=	OCT37766	# (DEC 16374)
		# RELTAB IS A PACKED TABLE. RELAYWORD CODE IN UPPER 4 BITS, RELAY CODE
		# IN LOWER 5 BITS.
		
RELTAB		OCT	04025
		OCT	10003
		OCT	14031
		OCT	20033
		OCT	24017
		OCT	30036
		OCT	34034
		OCT	40023
		OCT	44035
		OCT	50037
		OCT	54000
RELTAB11	OCT	60000

# Page 156
		# SWITCHED-BANK PORTION

		BANK	12
		SETLOC	T4RUP
		BANK
		
		COUNT*	$$/T4RPT
CDRVE		CCS	DSPTAB +11D
		TC	DSPOUT
		TC	DSPOUT
		
		XCH	DSPTAB +11D
		MASK	LOW11
		TS	DSPTAB +11D
		AD	RELTAB11
		EXTEND
		WRITE	OUT0
		TC	HANG20

# Page 157		
		# DSPOUT PROGRAM, PUTS OUT DISPLAYS

DSPOUTSB	TS	NOUT
		CS	ZERO
		TS	DSRUPTEM	# SET TO -0 FOR 1ST PASS THRU DSPTAB
		XCH	DSPCNT
		AD	NEG0		# TO PREVENT +0
		TS	DSPCNT
DSPSCAN		INDEX	DSPCNT
		CCS	DSPTAB
		CCS	DSPCNT		# IF DSPTAB ENTRY +, SKIP
		TCF	DSPSCAN	-2	# IF DSPCNT +, TRY AGAIN
		TCF	DSPLAY		# IF DSPTAB ENTRY -, DISPLAY
TABLNTH		OCT	12		# DEC 10, LENGTH OF DSPTAB
		CCS	DSRUPTEM	# IF DSRUPTEM=+0, 2ND PASS THRU DSPTAB
120MRUPT	DEC	16372		# (DSPCNT = 0).  +0 INTO NOUT.
		TS	NOUT
		TC	Q
		TS	DSRUPTEM	# IF DSRUPTEM=-0, 1ST PASS THRU DSPTAB
		CAF	TABLNTH		# (DSPCNT=0).+0 INTO DSRUPTEM. PASS AGAIN
		TCF	DSPSCAN -1
		
DSPLAY		AD	ONE
		INDEX	DSPCNT
		TS	DSPTAB		# REPLACE POSITIVELY
		MASK	LOW11		# REMOVE BITS 12 TO 15
		TS	DSRUPTEM
		CAF	HI5
		INDEX	DSPCNT
		MASK	RELTAB		# PICK UP BITS 12 TO 15 OF RELTAB ENTRY
		AD	DSRUPTEM
		EXTEND
		WRITE	OUT0
		
		TCF	Q+1
		
DSPOUT		CCS	FLAGWRD5	# IS DSKY FLAG ON
		CAF	ZERO		# NO
		TCF	NODSPOUT	# NO
		CCS	NOUT		# YES
		TC	DSPOUTSB
		TCF	NODSPOUT	# NO DISPLAY REQUESTS
		
HANG20		CS	14,11,9
		ADS	DSRUPTSW
		
		CAF	20MRUPT
		
SETTIME4	TS	TIME4

# Page 158
		# THE STATUS OF THE PROCEED PUSHBUTTON IS MONITORED EVERY 120 MILLISECONDS VIA THE CHANNEL 32 BIT 14 INBIT.
		#  THE STATE OF THIS INBIT IS COMPARED WITH ITS STATE DURING THE PREVIOUS T4RUPT AND IS PROCESSED AS FOLLOWS.
		#	IF PREV ON AND NOW ON	-- BYPASS.
		#	IF PREV ON AND NOW OFF	-- UPDATE IMODES33.
		#	IF PREV OFF AND NOW ON	-- UPDATE IMODES33 AND PROCESS VIA PINBALL.
		#	IF PREV OFF AND NOW OFF	-- BYPASS.
		# THE LOGIC EMPLOYED REQUIRES ONLY 9 MCT (APPROX. 108 MICROSECONDS) OF COMPUTER TIME WHEN NO CHANGES OCCUR.

PROCEEDE	CA	IMODES33	# MONITOR FOR PROCEED BUTTON
		EXTEND
		RXOR	CHAN32
		MASK	BIT14
		EXTEND
		BZF	T4JUMP		# NO CHANGE

		LXCH	IMODES33
		EXTEND
		RXOR	LCHAN
		TS	IMODES33	# UPDATE IMODES33
		MASK	BIT14
		CCS	A
		TCF	T4JUMP		# WAS ON -- NOW OFF
		
		CAF	CHRPRIO		# WAS OFF -- NOW ON
		TC	NOVAC
		EBANK=	DSPCOUNT
		2CADR	PROCKEY

# Page 159
		# JUMP TO APPROPRIATE ONCE-PER SECOND (0.96 SEC ACTUALLY) ACTIVITY

T4JUMP		INDEX	RUPTREG1
		TCF	+1

		TC	RCSMONIT
		TCF	RRAUTCHK
		TCF	IMUMON
		TCF	DAPT4S
		TC	RCSMONIT
		TCF	RRAUTCHK
		TCF	IMUMON
		TCF	DAPT4S
		
20MRUPT		=	OCT37776	# (DEC 16382)

# Page 160
		# ADDITIONAL ROUTINES FOR 20MS. KEYBOARD ACTIVITY

NODSPOUT	EXTEND
		WRITE	OUT0
		
		CAF	120MRUPT	#SET FOR NEXT CCRIVE
		TCF	SETTIME4
		
QUIKDSP		CAF	BIT14
		MASK	DSRUPTSW
		EXTEND
		BZF	QUIKOFF		# WROTE LAST TIME, NOW TURN OFF RELAYS.
		
		CCS	NOUT
		TC	DSPOUTSB
		TCF	NODSPY		# NOUT=0 OR BAD RETURN FROM DSPOUTSB
		CS	BIT14		# GOOD RETURN (WE DISPLAYED SOMETHING)
QUIKRUPT	ADS	DSRUPTSW

		CAF	20MRUPT
		TS	TIME4

		CAF	BIT9
		ADS	DSRUPTSW
		
		TC	RESUME
		
NODSPY		EXTEND
		WRITE	OUT0
		
SYNCT4		CAF	20MRUPT
		ADS	TIME4
		
		CAF	BIT9
		ADS	DSRUPTSW
		
		CCS	DSRUPTSW
		TC	RESUME
OCT37737	OCT	37737
		TC	SYNCT4
		TC	RESUME
		
QUIKOFF		EXTEND
		WRITE	OUT0
		CAF	BIT14		# RESET DSRUPTSW TO SEND DISPLAY NEXT PASS
		TCF	QUIKRUPT
		
14,11,9		OCT	22400

# Page 161
# PROGRAM NAME:  IMUMON

# FUNCTIONAL DESCRIPTION:  THIS PROGRAM IS ENTERED EVERY 480 MS.  IT DETECTS CHANGES OF THE IMU STATUS BITS IN
# CHANNEL 30 AND CALLS THE APPROPRIATE SUBROUTINES.  THE BITS PROCESSED AND THEIR RELEVANT SUROUTINES ARE:

#	FUNCTION		BIT	SUBROUTINE CALLED
#	--------		---	-----------------
#	TEMP IN LIMITS		 15	TLIM
#	ISS TURN-ON REQUEST	 14	ITURNON
#	IMU FAIL		 13	IMUFAIL (SETISSW)
#	IMU CDU FAIL		 12	ICDUFAIL (SETISSW)
#	IMU CAGE		 11	IMUCAGE
#	IMU OPERATE		  9	IMUOP

# THE LAST SAMPLED STATE OF THESE BITS IS LEFT IN IMODES30.  ALSO, EACH SUBROUTINE CALLED FINDS THE NEW
# VALUE OF THE BIT IN A, WITH Q SET TO THE PROPER RETURN LOCATION NXTIFAIL.

# CALLING SEQUENCE:  T4RUPT EVERY 480 MILLISECONDS.

# JOBS OR TASKS INITIATED:  NONE.

# SUBROUTINES CALLED:  TLIM, TURNON, SETISSW, IMUCAGE, IMUOP.

# ERASABELE INITIALIZATION:
#	FRESH START OR RESTART WITH NO GROUPS ACTIVE:  C((MODES30) = OCT 37411).
#	RESTART WITH ACTIVE GROUPS:	C(IMODES30) = (B(IMODES30)AND(OCT 00035)) PLUS OCT 37400.
#					THIS LEAVES IMU FAIL BITS INTACT.

# ALARMS:  NONE.

# EXIT:  TNONTEST.

# OUTPUT:  UPDATED IMODES30 WITH CHANGES PROCESSED BY APPROPRIATE SUBROUTINE.

IMUMON		CA	IMODES30	# SEE IF THERE HAS BEEN A CHANGE IN THE
		EXTEND			# RELEVANT BITS OF CHAN 30.
		RXOR	CHAN30
		MASK	30RDMSK
		EXTEND
		BZF	TNONTEST	# NO CHANGE IN STATUS
		
		TS	RUPTREG1	# SAVE BITS WHICH HAVE CHANGED.
		LXCH	IMODES30	# UPDATE IMODES30.
		EXTEND
		RXOR	LCHAN
		TS	IMODES30
		
		CS	ONE
		XCH	RUPTREG1
		EXTEND
# Page 162
		BZMF	TLIM		# CHANGE IN IMU TEMP.
		TCF	NXTIFBIT	# BEGIN BIT SCAN.
		
 -1		AD	ONE		# (RE-ENTERS HERE FROM NXTIFAIL.)
NXTIFBIT	INCR	RUPTREG1	# ADVANCE BIT POSITION NUMBER.
 +1		DOUBLE
		TS	A		# SKIP IF OVERFLOW.
		TCF	NXTIFBIT	# LOOK FOR BIT.

		XCH	RUPTREG2	# SAVE OVERFLOW-CORRECTED DATA.
		INDEX	RUPTREG1	# SELECT NEW VALUE OF THIS BIT.
		CAF	BIT14
		MASK	IMODES30
		INDEX	RUPTREG1
		TC	IFAILJMP
		
NXTIFAIL	CCS	RUPTREG2	# PROCESS ANY ADDITIONAL CHANGES.
		TCF	NXTIFBIT -1

# Page 163
# PROGRAM NAME:  TNONTEST.

# FUNCTIONAL DESCRIPTION:  THIS PROGRAM HONORS REQUESTS FOR ISS INITIALIZATION.  ISS TURN-ON (CHANNEL 30 BIT 14)
# AND ISS OPERATE (CHANNEL 30 BIT 9) REQUESTS ARE TREATED AS A PAIR AND PROCESSING TAKES PLACE .480 SECONDS
# AFTER EITHER ONE APPEARS.  THIS INITIALIZATION TAKES ON ONE OF THE FOLLOWING THREE FORMS:

#	1) ISS TURN-ON:  IN THIS SITUATION THE COMPUTER IS OPERATING WHEN THE ISS IS TURNED ON.  NOMINALLY,
#	BOTH ISS TURN-ON AND ISS OPERATE APPEAR.  THE PLATFORM IS CAGED FOR 90 SECONDS AND THE ICDU'S ZEROED
#	SO THAT AT THE END OF THE PROCESS THE GIMBAL LOCK MONITOR WILL FUNCTION PROPERLY.

#	2) ICDU INITIALIZATION:  IN THIS CASE THE COMPUTER WAS PROBABLY TURNED ON WITH THE ISS IN OPERATE OR
#	A FRESH START WAS DONE WIT THE ISS IN OPERATE.  IN THIS CASE ONLY ISS OPERATE IS ON.  THE ICDU'S ARE
#	ZEROED SO THE GIMBAL LOCK MONITOR WILL FUNCTION.  AN EXCEPTION IS IF THE ISS IS IN GIMBAL LOCK AFTER
#	A RESTART, THE ICDU'S WILL NOT BE ZEROED.

#	3) RESTART WITH RESTARTABLE PROGRAM USING THE IMU:  IN THIS CASE, NO INITIALIZATION TAKES PLACE SINCE
#	IT IS ASSUMED THT THE USING PROGRAM DID THE INITIALIZATION AND THEREFORE T4RUPT SHOULD NOT INTERFERE.

# IMODES30 BIT 7 IS SET = 1 BY THE FIRST BIT (CHANNEL 30 BIT 14 OR 9) WHICH ARRIVES.  FOLLOWING THIS, TNONTEST IS
# ENTERED, FINDS BIT 7 = 1 BUT BIT 8 = 0, SO IT SETS BIT 8 = 1 AND EXITS.  THE NEXT TIME IT FINDS BIT 8 = 1 AND
# PROCEEDS, SETTING BITS 8 AND 7 = 0.  AT PROCTNON, IF ISS TURN-ON REQUEST IS PRESENT, THE ISS IS CAGED (ZERO +
# COARSE).  IF ISS OPERATE IS NOT PRESENT PROGRAM ALARM 00213 IS ISSUED.  AT THE END OF A 90 SECOND CAGE, BIT 2
# OF IMODES30 IS TESTED.  IF IT IS = 1, ISS TURN-ON WAS NOT PRESENT FOR THE ENTIRE 90 SECONDS.  IN THAT CASE, IF
# THE ISS TURN-ON REQUEST IS PRESENT TEH 90 SECOD WAIT IS REPEATED.  OTHERWISE NO ACTION OCURS UNLESS A PROGRAM
# WAS WAITING FOR THE INITIALIZATION IN WHIC CASE TH PROGRAM IS GIVEN AN IMUSTALL ERROR RETURN.  IF THE DELAY
# WENT PROPERLY, THE ISS DELAY OUTBIT IS SENT AND THE ICDU'S ZEROED.  A TASK IS INITIATED TO REMOVE THE PIPA FAIL
# INHIBIT BIT IN 10.24 SECONDS.  IF A MISSION PROGRAM WAS WAITING IT IS INFORMED VIA ENDIMU.

# AT PROCTNON, IF ONLY ISS OPERATE IS PRESENT (OPONLY), THE CDU'S ARE ZEROED UNLESS THE PLATFORM IS IN COARSE
# ALIGN (= GIMBAL LOCK HERE) OR A MISSIN PROGRAM IS USING THE IMU (INUSEFLG = 1).

# CALLING SEQUENCE:  T4RUPT EVERY 480 MILLISECONDS AFTER IMUMON.

# JOBS OR TASKS INITIATED:  1) ENDTNON, 90 SECONDS AFER CAGING STARTED.  2) ISSUP, 4 SECONDS AFTER CAGING DONE.
#	3) PFAILOK, 10.24 SECONDS AFTER INITIALIZATION COMPLETED.  4) UNZ2, 320 MILLISECONDS AFTER ZEROING
#	STARTED.

# SUBROUTINES CALLED: CAGESUB, CAGESUB2, ZEROICDU, ENDIMU, IMUBAD, NOATTOFF, SETISSW, VARDELAY.

# ERASABLE INITIALIZATION:  SEE IMUMON.

# ALARMS:  PROGRAM ALARM 00213 IF ISS TURN-ON REQUESTED WITHOUT ISS OPERATE.

# EXIT:  ENDTNON EXITS TO C33TEST.  TASKS HAVING TO DO WITH INITIALIZATION EXIT AS FOLLOWS:  MISSION PROGRAM
# WAITING AND INITIALIZATION COMPLETE, EXIT TO ENDIMU, MISSION PROGRAM WAITING AND INITIALIZATION FAILED, EXIT TO
# IMUBAD, IMU NOT IN USE, EXIT TO TASKOVER.

# OUTPUT:  ISS INITIALIZED.

TNONTEST	CS	IMODES30	# AFTER PROCESSING ALL CHANGES, SEE IF IT
# Page 164
		MASK	BIT7		# IS TIME TO ACT ON A TURN-ON SEQUENCE.
		CCS	A
		TCF	C33TEST		# NO -- EXAMINE CHANNEL 33.
			
		CAF	BIT8		# SEE IF FIRST SAMPLE OR SECOND.
		MASK	IMODES30
		CCS	A
		TCF	PROCTNON	# REACT AFTER A SECOND SAMPLE.
			
		CAF	BIT8		# IF FIRST SAMPLE, SET BIT TO REACT NEXT
		ADS	IMODES30	# TIME.
		TCF	C33TEST
			
		# PROCESS IMU TURN-ON REQUESTS AFTER WAITING 1 SAMPLE FOR ALL SIGNALS TO ARRIVE.
			
PROCTNON	CS	BITS7&8
		MASK	IMODES30
		TS	IMODES30
		MASK	BIT14		# SEE IF TURN-ON REQUEST.
		CCS	A
		TCF	OPONLY		# OPERATE ON ONLY.
			
		CS	IMODES30	# IF TURN-ON REQUEST, WE SHOUD HAVE IMU
		MASK	BIT9		# OPERATE.
		CCS	A
		TCF	+3
			
		TC	ALARM		# ALARM IF NOT
		OCT	213
			
 +3		TC	CAGESUB
		CAF	90SECS
		TC	WAITLIST
		EBANK=	M11
		2CADR	ENDTNON

		TCF	C33TEST
			
RETNON		CAF	90SECS
		TC	VARDELAY
			
ENDTNON		CS	BIT2		# RESET TURN-ON REQUEST FAIL BIT.
		MASK	IMODES30
		XCH	IMODES30
		MASK	BIT2		# IF IT WAS OFF, SEND ISS DELAY COMPLETE.
		EXTEND
		BZF	ENDTNON2
			
		CAF	BIT14		# IF IT WAS ON AND TURN-ON REQUEST NOW.
# Page 165
		MASK	IMODES30	# PRESENT, RE-ENTER 90 SEC DELAY IN WL.
		EXTEND
		BZF	RETNON
			
		CS	FLAGWRD0	# IF IT IS NOT ON NOW, SEE IF A PROG WAS
		MASK	IMUSEBIT	# WAITING.
		CCS	A
		TCF	TASKOVER
		TC	POSTJUMP
		CADR	IMUBAD		# UNSUCCESSFUL TURN-ON.
			
ENDTNON2	CAF	BIT15		# SEND ISS DELAY COMPLETE.
		EXTEND
		WOR	CHAN12
			
		TC 	IBNKCALL	# TURN OFF NO ATT LAMP.
		CADR	NOATTOFF
			
UNZ2		TC	ZEROICDU

		CS	BITS4&5		# REMOVE ZERO AND COARSE.
		EXTEND
		WAND	CHAN12
			
		CAF	BIT11		# WAIT 10 SECS FOR CTRS TO FIND GIMBALS
		TC	VARDELAY
			
ISSUP		CS	OCT54		# REMOVE CAGING, IMU FAIL INHIBIT BIT, AND
		MASK	IMODES30	# ICDUFAIL INHIBIT FLAGS.
		TS	IMODES30
			
		CS	BIT6		# ENABLE DAP
		MASK	IMODES33
		TS	IMODES33
			
		CS	FLAGWRD2	# TEST DRIFTFLG: IF ON DO NOTHING BECAUSE
		MASK	DRFTBIT		# IMUCOMP SHOUD BE ALL SET UP (RESTART
		EXTEND			# WITH IMUSE DOWN).  IF OFF, SET DRIFTFLG
		BZF	+4		# AND 1/PIPADT TO GET FREEFALL IMUCOMP
		ADS	FLAGWRD2	# GOING (FRESH START OR ISS TURN-ON).
		CA	TIME1
		XCH	1/PIPADT	# CANNOT GET HERE IF RESTART WITH IMUSE UP
			
		TC	SETISSW		# ISS WARNING MIGHT HAVE BEEN INHIBITED.
			
		CS	BIT15		# REMOVE IMU DELAY COMPLETE DISCRETE.
		EXTEND
		WAND	CHAN12
			
		CAF	4SECS		# DON'T ENABLE PROG ALARM ON PIP FAIL FOR
# Page 166
		TC	WAITLIST	# ANOTHER 4 SECS.
		EBANK=	CDUIND
		2CADR	PFAILOK
			
		TCF	TASKOVER
		
OPONLY		CAF	BIT4		# IF OPERATE ON ONLY, AND WE ARE IN COARSE
		EXTEND			# ALIGN, DON'T ZERO THE CDUS BECAUSE WE
		RAND	CHAN12		# MIGHT BE IN GIMBAL LOCK.
		CCS	A
		TCF	C33TEST
			
		CAF	IMUSEBIT	# OTHERWISE, ZERO THE COUNTERS.
		MASK	FLAGWRD0	# UNLESS SOMEONE IS USING TH IMU.
		CCS	A
		TCF	C33TEST
			
		TC	CAGESUB2	# SET TURNON FLAGS.
			
ISSZERO		TC	IBNKCALL	# TURN OFF NO ATT LAMP.
		CADR	NOATTOFF	# IMU CAGE OFF ENTRY.
			
		CAF	BIT5		# ISS CDU ZERO
		EXTEND
		WOR	CHAN12
			
		TC	ZEROICDU
		CAF	BIT6		# WAIT 300 MS. FOR AGS TO RECEIVE SIGNAL.
		TC	WAITLIST
		EBANK=	M11
		2CADR	UNZ2
			
		TCF	C33TEST

# Page 167
# PROGRAM NAME:  C33TEST
#
# FUNCTIONAL DESCRIPTION:  THIS PROGRAM MONITORS THREE FLIP-FLOP INBITS OF CHANNEL 33 AND CALLS THE APPROPRIATE
# SUBROUTINE TO PROCESS A CHANGE.  IT IS ANALOGOUS TO IMUMON, WHICH MONITORS CHANNEL 30, EXCEPT THAT IT READS
# CHANNEL 33 WITH A WAND INSTRUCTION BECAUSE A `WRITE' PULSE IS REQUIRED TO RESET THE FLIP-FLOPS.  THE BITS
# PROCESSED AND THE SUBROUTINES CALLED ARE:
#	BIT	FUNCTION		SUBROUTINE
#	---	--------		----------
#	 13	PIPA FAIL		PIPFAIL
#	 12	DOWNLINK TOO FAST	DNTMFAST
#	 11	UPLINK TOO FAST		UPTMFAST
#
# UPON ENTRY TO THE SUBROUTINE, THE NEW BIT STATE IS IN A.
#
# CALLING SEQUENCE:  EVERY 480 MILLISECONDS AFTER TNONTEST.
#
# JOBS OR TASKS INITIATED:  NONE.
#
# SUBROUTINES CALLED:  PIPFAIL, DNTMFAST AND UPTMFAST ON BIT CHANGES.
#
# ERASABLE INITIALIZATION:  C(IMODES33) = OCT 16000 ON A FRESH START OR RESTART, THEREFORE, THESE ALARMS WILL
# REAPPEAR IF THE CONDITIONS PERSIST.
#
# ALARMS:  NONE.
#
# EXIT:  GLOCKMON.
#
# OUTPUT:  UPDATED BITS 13, 12, AND 11 OF IMODES33 WITH CHANGES PROCESSED.

C33TEST		CA	IMODES33		# SEE IF RELEVANT CHAN33 BITS HAVE
		MASK	33RDMSK
		TS	L			# CHANGED.
		CAF	33RDMSK
		EXTEND
		WAND	CHAN33			# RESETS FLIP-FLOP INPUTS
		EXTEND
		RXOR	LCHAN
		EXTEND
		BZF	GLOCKMON		# ON NO CHANGE.
		
		TS	RUPTREG1		# SAVE BITS WHICH HAVE CHANGED.
		LXCH	IMODES33
		EXTEND
		RXOR	LCHAN
		TS	IMODES33		# UPDATED IMODES33.
		
		CAF	ZERO
		XCH	RUPTREG1
		DOUBLE
# Page 168
		TCF	NXTIBT +1		# SCAN FOR BIT CHANGES.
		
 -1		AD	ONE
NXTIBT		INCR	RUPTREG1
 +1		DOUBLE
		TS	A			# (CODING IDENTICAL TO CHAN 30).
		TCF	NXTIBT

		XCH	RUPTREG2
		INDEX	RUPTREG1		# GET NEW VALUE OF BIT WHICH CHANGED.
		CAF	BIT13
		MASK	IMODES33
		INDEX	RUPTREG1
		TC	C33JMP
NXTFL33		CCS	RUPTREG2		# PROCESS POSSIBLE ADDITIONAL CHANGES.
		TCF	NXTIBT -1

# Page 169
# PROGRAM NAME:  GLOCKMON
#
# FUNCTIONAL DESCRIPTION:  THIS PROGRAM MONITORS THE CDUZ COUNTER TO DETERMINE WHETHER THE ISS IS IN GIMBAL LOCK
# AND TAKES ACTION IF IT IS.  THREE REGIONS OF MIDDLE GIMBAL ANGLE (MGA) ARE USED:
#
#	1) ABS(MGA) LESS THAN OR EQUAL TO 70 DEGREES -- NORMAL MODE.
#	2) ABS(MGA) GREATER THAN 70 DEGREES AND LESS THAN OR EQUAL TO 85 DEGREES -- GIMBAL LOCK LAMP TURNED ON.
#	3) ABS(MGA) GREATER THAN 85 DEGREES -- ISS PUT IN COARSE ALIGN AND NO ATT LAMP TURNED ON.
#
# CALLING SEQUENCE:  EVERY 480 MILLISECONDS AFTER C33TEST.
#
# JOBS OR TASKS INITIATED:  NONE.
#
# SUBROUTINES CALLED:	1) SETCOARS WHEN ABS(MGA) GREATER THEN 85 DEGREES AND ISS NOT IN COARSE ALIGN.
#			2) LAMPTEST BEFORE TURNING OFF GIMBAL LOCK LAMP.
#
# ERASABLE INITIALIZATION:
#		1) FRESH START OR RESTART WITH NO GROUPS ACTIVE:  C(CDUZ) = 0, IMODES30 BIT 6 = 0, IMODES33 BIT 1 =  0.
#		2) RESTART WTIH GROUPS ACTIVE:	SAME AS FRESH START EXCEPT C(CDUZ) NOT CHANGED SO GIMBAL MONITOR
#						PROCEEDS AS BEFORE.
#
# ALARMS:	1) MGA REGION (2) CAUSES GIMBAL LOCK LAMP TO BE LIT.
#		2) MGA REGION (3) CAUSES THE ISS TO BE PUT IN COARSE ALIGN AND THE NO ATT LAMP TO BE LIT IF EITHER NOT
#		   SO ALREADY.

GLOCKMON	CCS	CDUZ
		TCF	GLOCKCHK		# SEE IF MAGNITUDE OF MGA IS GREATER THAN
		TCF	SETGLOCK		# 70 DEGREES.
		TCF	GLOCKCHK
		TCF	SETGLOCK
		
GLOCKCHK	AD	-70DEGS
		EXTEND
		BZMF	SETGLOCK -1		# NO LOCK.
		
		AD	-15DEGS			# SEE IF ABS(MGA) GREATER THAN 85 DEGREES
		EXTEND
		BZMF	NOGIMRUN

		CAF	BIT4			# IF SO, SYSTEM SHOULD BE IN COARSE ALIGN
		EXTEND				# TO PREVENT GIMBAL RUNAWAY.
		RAND	CHAN12
		CCS	A
		TCF	NOGIMRUN
		
		TC	IBNKCALL
		CADR	SETCOARS
		
		CAF	SIX			# ENABLE ISS ERROR COUNTERS IN 60 MS.
		TC	WAITLIST
# Page 170
		EBANK=	CDUIND
		2CADR	CA+ECE
		
NOGIMRUN	CAF	BIT6			# TURN ON GIMBAL LOCK LAMP.
		TCF	SETGLOCK
		
 -1		CAF	ZERO
SETGLOCK	AD	DSPTAB +11D		# SEE IF PRESENT STATE OF GIMBAL LOCK LAMP
		MASK	BIT6			# AGREES WITH DESIRED STATE BY HALF ADDING
		EXTEND				# THE TWO.
		BZF	GLOCKOK			# OK AS IS.
		
		MASK	DSPTAB +11D		# IF OFF, DON'T TURN ON IF IMU BEING CAGED.
		CCS	A
		TCF	GLAMPTST		# TURN OFF UNLESS LAMP TEST IN PROGRESS.
		
		CAF	BIT6
		MASK	IMODES30
		CCS	A
		TCF	GLOCKOK
		
GLINVERT	CS	DSPTAB +11D		# INVERT GIMBAL LOCK LAMP.
		MASK	BIT6
		AD	BIT15			# TO INDICATE CHANGE IN DSPTAB +11D.
		XCH	DSPTAB +11D
		MASK	OCT37737
		ADS	DSPTAB +11D
		TCF	GLOCKOK

GLAMPTST	TC	LAMPTEST		# TURN OFF UNLESS LAMP TEST IN PROGRESS.
		TCF	GLOCKOK
		TCF	GLINVERT

-70DEGS		DEC	-.38888			# -70 DEGREES SCALED IN HALF-REVOLUTIONS.
-15DEGS		DEC	-.08333

# Page 171
# PROGRAM NAME:  TLIM.
#
# FUNCTIONAL DESCRIPTION:  THIS PROGRAM MAINTAINS THE TEMP LAMP (BIT 4 OF CHANNEL 11) ON THE DSKY TO AGREE WITH
# THE TEMP SIGNAL FROM THE ISS (BIT 15 OF CHANNEL 30).  HOWEVER, THE LIGHT WILL NOT BE TURNED OFF IF A LAMP TEST
# IS IN PROGRESS.
#
# CALLING SEQUENCE:  CALLED BY IMUMON ON A CHANGE OF BIT 15 OF CHANNEL 30.
#
# JOBS OR TASKS INITIATED:  NON.
#
# SUBROUTINES CALLED:  LAMPTEST.
#
# ERASABLE INITIALIZATION:  FRESH START AND RESTART TURN THE TEMP LAMP OFF.
#
# ALARMS:  TEMP LAMP TURNED ON WHEN THE IMU TEMP GOES OUT OF LIMITS.
#
# EXIT:  NXTIFAIL.
#
# OUTPUT:  SERVICE OF TEMP LAMP.		  IN A, EXCEPT FOR TLIM.

TLIM		MASK	POSMAX			# REMOVE BIT FROM WORD OF CHANGES AND SET
		TS	RUPTREG2		# DSKY TEMP LAMP ACCORDINGLY.
		
		CCS	IMODES30
		TCF	TEMPOK
		TCF	TEMPOK
		
		CAF	BIT4			# TURN ON LAMP.
		EXTEND
		WOR	DSALMOUT
		TCF	NXTIFAIL
		
TEMPOK		TC	LAMPTEST		# IF TEMP NOW OK, DON'T TURN OFF LAMP IF
		TCF	NXTIFAIL		# LAMP TEST IN PROGRESS.
		
		CS	BIT4
		EXTEND
		WAND	DSALMOUT		# TURN OFF LAMP
		TCF	NXTIFAIL

# Page 172
# PROGRAM NAME:  ITURNON.
#
# FUNCTIONAL DESCRIPTION:  THIS PROGRAM IS CALLED BY IMUMON WHEN A CHANGE OF BIT 14 OF CHANNEL 30 (ISS TURN-ON
# REQUEST) IS DETECTED.  UPON ENTRY, ITURNON CHECKS IF A TURN-ON DELAY SEQUENCE HAS FAILED, AND IF SO, IT EXITS.
# IF NOT, IT CHECKS WHETHER THE TURN-ON REQUEST CHANGE IS TO ON OR OFF.  IF ON, IT SETS BIT7 OF IMODES30 TO 1 SO
# THAT TNONTEST WILL INITIATE THE ISS INITIALIZATION SEQUENCE.  IF OFF, THE TURN-ON DELAY SIGNAL, CHANNEL 12 BIT
# 15, IS CHECKED AND IF IT IS ON, ITURNON EXITS.  IF THE DEALY SIGNAL IS OFF, PROGRAM ALARM 00207 IS ISSUED, BIT 2
# OF IMODES30 IS SET TO 1 AND THE PROGRAM EXITS.
#
# THE SETTING OF BIT 2 OF IMODES30 (ISS DELAY SEQUENCE FAIL) INHIBITS THIS ROUTINE AND IMUOP FROM
# PROCESSING ANY CHANGES.  THIS BIT WILL BE RESET BY THE ENDTNON ROUTINE WHEN THE CURRENT 90 SECOND DELAY PERIOD
# ENDS.
#
# CALLING SEQUENCE:  FROM IMUMON WHEN ISS TURN-ON REQUEST CHANGES STATE.
#
# JOBS OR TASKS INITITIATED:  NONE.
#
# SUBROUTINES CALLED:  ALARM, IF THE ISS TURN-ON REQUEST IS NOT PRESENT FOR 90 SECONDS.
#
# ERASABLE INITIALIZATION:  FRESH START AND RESTART SET BIT 15 OF CHANNEL 12 AND BITS 2 AND 7 OF IMODES30 TO 0,
# AND BIT 14 OF IMODES30 TO 1.
#
# ALARMS: PROGRAM ALARM 00207 IS ISSUED IF THE ISS TURN-ON REQUEST SIGNAL IS NOT PRESENT FOR 90 SECONDS.
#
# EXIT:  NXTIFAIL.
#
# OUTPUT:  BIT 7 OF IMODES30 TO START ISS INITIALIZATION, OR BIT 2 OF IMODES30 AND PROGRAM ALARM 00207 TO INDICATE
# A FAILED TURN-ON SEQUENCE.

ITURNON		CAF	BIT2		# IF DELAY REQUEST HAS GONE OFF
		MASK	IMODES30	# PREMATURELY, DO NOT PROCESS ANY CHANGES
		CCS	A		# UNTIL THE CURRENT 90 SEC WAIT EXPIRES.
		TCF	NXTIFAIL
		
		CAF	BIT14		# SEE IF JUST ON OR OFF.
		MASK 	IMODES30
		EXTEND
		BZF	ITURNON2	# IF JUST ON.
		
		CAF	BIT15
		EXTEND			# SEE IF DELAY PRESENT DISCRETE HAS BEEN
		RAND	CHAN12		# SENT.  IF SO, ACTION COMPLETE
		EXTEND
		BZF	+2
		TCF	NXTIFAIL
		
		CAF	BIT2		# IF NOT, SET BIT TO INDICATE REQUEST NOT
		ADS	IMODES30	# PRESENT FOR FULL DURATION.
		TC	ALARM
		OCT	207
		TCF	NXTIFAIL

# Page 173
ITURNON2	CS	IMODES30	# SET BIT7 TO INDICATE WAIT OF 1 SAMPLE
		MASK	BIT7
		ADS	IMODES30
		CAF	RRINIT
		TS	RADMODES
		TCF	NXTIFAIL
		
RRINIT		OCT	00102

# Page 174
# PROGRAM NAME:  IMUCAGE.
#
# FUNCTIONAL DESCRIPTION:  THIS PROGRAM PROCESSES CHANGES OF THE IMUCAGE INBIT, CHANNEL 30 BITS 11.  IF THE BIT
# CHANGES TO 0 (CAGE BUTTON PRESSED), THE ISS IS CAGED (ICDU ZERO + COARSE ALIGN + NO ATT LAMP) UNTIL THE
# ASTRONAUT SELECTS ANOTHER PROGRAM TO ALIGN THE ISS.  ANY PULSE TRAINS TO THE ICDU'S AND GYRO'S ARE TERMINATED,
# THE ASSOCIATE OUTCOUNTERS ARE ZEROED AND THE GYRO'S ARE DE-SELECTED.  NO ACTION OCCURS WHEN THE BUTTON IS
# RELEASED (INBIT CHANGES TO 1).
#
# CALLING SEQUENCE:  BY IMUMON WHEN IMU CAGE BIT CHANGES.
#
# JOBS OR TASKS INITIATED:  NONE.
#
# SUBROUTINES CALLED:  CAGESUB.
#
# ERASABLE INITIALZATION:  FRESH START AND RESTART SET BIT 11 OF IMODES30 TO 1.
#
# ALARMS: NONE.
#
# EXIT:  NXTIFAIL.
#
# OUTPUT:  ISS CAGED, COUNTERS ZEROED, PULSE TRAINS TERMINATED AND NO ATT LAMP LIT.

IMUCAGE		CCS	A		# NO ACTION OF GOING OFF.
		TCF	ISSZERO
		CS	OCT77000	# TERMINATE ICDU, RCDU, GYRO PULSE TRAINS
		EXTEND
		WAND	CHAN14
		
		CS	OCT272		# KNOCK DOWN DISPLAY INERTIAL DATA, IMU
		EXTEND			# ERROR COUNTER ENABLE, ZERO ICDU, COARSE
		WAND	CHAN12		# ALIGN ENABLE, RR ERROR COUNTER ENABLE.
		
		CS 	ENGONBIT	# INSURE ENGONFLG IS CLEAR.
		MASK	FLAGWRD5
		TS	FLAGWRD5
		CS	PRIO30		# TURN ENGINE OFF.
		EXTEND
		RAND	DSALMOUT
		AD	BIT14
		EXTEND
		WRITE	DSALMOUT	# FORCE BIT14=1, BIT13=0.
		
		TC	CAGESUB1
		
		TC	IBNKCALL	# KNOCK DOWN TRACK, REFSMMAT, DRIFT FLAGS
		CADR	RNDREFDR

		CS	ZERO
		TS	CDUXCMD
		TS	CDUYCMD
# Page 175
		TS	CDUZCMD
		TS	GYROCMD
		
		CS	OCT740		# HAVING WAITED AT LEAST 27 MCT FROM
		EXTEND			# GYRO PULSE TRAIN TERMINATION, WE CAN
		WAND	CHAN14		# DE-SELECT THE GYROS.
		TCF	NXTIFAIL

# Page 176
# PROGRAM NAME:  IMUOP.
#
# FUNCTIONAL DESCRIPTION:  THIS PROGRAM PROCESSES CHANGES IN THE ISS OPERATE DISCRETE, BIT 9 OF CHANNEL 30.
# IF THE INBIT CHANGES TO 0, INDICATING ISS ON, IMUOP GENERALLY SETS BIT 7 OF IMODES30 TO 1 TO REQUEST ISS
# INITIALIZATION VIA TNONTEST.  AN EXCEPTION IS DURING A FAILED ISS DELAY DURING WHICH BIT 2 OF IMODES30 IS SET
# TO 1 AND NO FURTHER INITIALIZATION IS REQUIRED.  WHEN THE INBIT CHANGES TO 1, INDICATING ISS OFF, IMUSEFLG IS
# TESTED TO SEE IF ANY PROGRAM WAS USING THE ISS.  IF SO, PROGRAM ALARM 00214 IS ISSUED.
#
# CALLING SEQUENCE:  BY IMUMON WHEN BIT 9 OF CHANNEL 30 CHANGES.
#
# JOBS OR TAKS INITIATED:  NONE.
# 
# SUBROUTINES CALLED:  ALARM, IF ISS IS TURNED OFF WHILE IN USE.
#
# ERASABLE INITIALIZATION:  ON FRESH START AND RESTART, BIT 9 OF IMODES30 IS SET TO 1 EXCEPT WHEN THE GIMBAL LOCK
# LAMP IS ON, IN WHICH CASE IT IS SET TO 0.  THIS PREVENTS ICDU ZERO BY TNONTEST WITH THE ISS IN GIMBAL LOCK.
#
# ALARMS:  PROGRAM ALARM 00214 IF THE ISS IS TURNED OFF WHILE IN USE.
#
# EXIT:  NXTIFAIL.
#
# OUTPUT:  ISS INITIALIZATION REQUEST (IMODES30 BIT 7) OR PROGRAM ALARM 00214.

IMUOP		EXTEND
		BZF	IMUOP2
		
		CS	IMODES33		# DISABLE DAP
		MASK	BIT6
		ADS	IMODES33
		
		TC	IBNKCALL		# KNOCK DOWN TRACK, REFSMMAT, DRIFT FLAGS
		CADR	RNDREFDR
		
		CS	BITS7&8			# KNOCK DOWN RENDEZVOUS, IMUUSE FLAGS
		MASK	FLAGWRD0
		XCH	FLAGWRD0		# IF GOING OFF, ALARM IF PROG USING IMU.
		COM
		MASK	IMUSEFLG
		CCS	A
		TCF	NXTIFAIL
		
		TC	ALARM
		OCT	214
		TCF	NXTIFAIL
		
IMUOP2		CAF	BIT2			# SEE IF FAILED ISS TURN-ON SEQ IN PROG.
		MASK	IMODES30
		CCS	A
		TCF	NXTIFAIL		# IF SO, DON'T PROCESS UNTIL PRESENT 90
		TCF	ITURNON2		# SECONDS EXPIRES.

# Page 177
# PROGRAM NAME:  PIPFAIL
#
# FUNCITONAL DESCRIPTION:  THIS PROGRAM PROCESSES CHANGES OF BIT 13 OF CHANNEL 33, PIPA FAIL.  IT SETS BIT 10 OF
# IMODES30 TO AGREE.  IT CALLS SETISSW IN CASE A PIPA FAIL NECESSITATES AN ISS WARNING.  IF NOT, I.E., IMODES30
# BIT 1 = 1, AND A PIPA FAIL IS PRESENT AND THE ISS NOT BEING INITIALIZED, PROGRAM ALARM 0212 IS ISSUED.
#
# CALLING SEQUENCE:  BY C33TEST ON CHANGES OF CHANNEL 33 BIT 13.
#
# JOBS OR TASKS INITIATED:  NONE.
#
# SUBROUTINES CALLED:  1) SETISSW, AND 2) ALARM (SEE FUNCITONAL DESCRIPTION).
#
# ERASABLE INITIALZIZATION:  SEE IMUMON FOR INITIALIZATION OF IMODES30.  THE RELEVANT BITS ARE 5, 7, 8, 9, AND 10.
#
# ALARMS:  PROGRAM ALARM 00212 IF PIPA FAIL IS PRESENT BUT NEITHER ISS WARNING IS TO BE ISSUED NOR THE ISS IS
# BEING INITIALIZED.
#
# EXIT:  NXTFL33.
#
# OUTPUT:  PROGRAM ALARM 00212 AND ISS WARNING MAINTENANCE.

PIPFAIL		CCS	A			# SET BIT10 IN IMODES30 SO ALL ISS WARNING
		CAF	BIT10			# INFO IS IN ONE REGISTER.
		XCH	IMODES30
		MASK	-BIT10
		ADS	IMODES30
		
		TC	SETISSW
		
		CS	IMODES30		# IF PIP FAIL DOESN'T LIGHT ISS WARNING, DO
		MASK	BIT1			# A PROGRAM ALARM IF IMU OPERATING BUT NOT
		CCS	A			# CAGED OR BEING TURNED ON.
		TCF	NXTFL33
		
		CA	IMODES30
		MASK	OCT1720
		CCS	A
		TCF	NXTFL33			# ABOVE CONDITION NOT MET.
		
		TC	ALARM
		OCT	212
		TCF	NXTFL33

# Page 178
# PROGRAM NAMES:  DNTMFAST, UPTMFAST
#
# FUNCTIONAL DESCRIPTION:  THESE PROGRAMS PROCESS CHANGES OF BITS 12 AND 11 OF CHANNEL 33.  IF A BIT CHANGES TO A
# 0, A PROGRAM ALARM IS ISSUED.  THE LAARMS ARE:
#
#	BIT	ALARM	CAUSE
#	---	-----	-----
#	 12	01105	DOWNLINK TOO FAST
#	 11	01106	UPLINK TOO FAST
#
# CALLING SEQUENCE:  BY C33TEST ON A BIT CHANGE.
#
# SUBROUTINES CALLED:  ALARM, IF A BIT CHANGES TO A 0.
#
# ERASABLE INITIALIZATION:  FRESH START OR RESTART, BITS 12 AND 11 OF IMODES33 ARE SET TO 1.
#
# ALARMS:  SET FUNCTGIONAL DESCRIPTION.
#
# EXIT:  NXTFL33.
#
# OUTPUT:  PROGRAM ALARM ON A BIT CHANGE TO 0.

DNTMFAST	CCS	A			# DO PROG ALARM IF TM TOO FAST.
		TCF	NXTFL33
		
		TC	ALARM
		OCT	1105
		TCF	NXTFL33
		
UPTMFAST	CCS	A			# SAME AS DNLINK TOO FAST WITH DIFFERENT
		TCF	NXTFL33			# ALARM CODE.
		
		TC	ALARM
		OCT	1106
		TCF	NXTFL33
# Page 179
# PROGRAM NAME:  SETISSW
#
# FUNCTIONAL DESCRIPTION:  THIS PROGRAM TURNS THE ISS WARNING LAMP ON AND OFF (CHANNEL 11 BIT 1 = 1 FOR ON,
# 0 FOR OFF) DEPENDING ON THE STATUS OF IMODES30 BITS 13 (IMU FAIL) AND 4 (INHIBIT IMU FAIL), 12 (ICDU FAIL) AND
# 3 (INHIBIT ICDU FAIL), AND 10 (PIPA FAIL) AND 1 (INHIBIT PIPA FAIL).  THE LAMP IS LEFT ON IF A LAMP TEST IS IN
# PROGRESS.
#
# CALLING SEQUENCE:  CALLED BY IMUMON ON CHANGES TO IMU FAIL AND ICDU FAIL.  CALLED BY IFAILOK AND PFAILOK UPON
# REMOVAL OF THE FAIL INHIBITS.  CALLED BY PIPFAIL WHEN THE PIPA FAIL DISCRETE CHANGES.  IT IS CALLED BY PIPUSE
# SINCE THE PIPA FAIL PROGRAM ALARM MAY NECESSITATE AN ISS WARNING, AND LIKEWISE BY PIPFREE WHEN THE ALARM DEPARTS
# AND IT IS CALLED BY IMUZERO3 AND ISSUP AFTER THE FAIL INHIBITS HAVE BEEN REMOVED.
#
# JOBS OR TASKS INITIAZTED:  NONE.
#
# SUBROUTINES CALLED:  NONE.
#
# ERASABLE INITIALIZATION:
#
#	1) IMODES30 -- SEE IMUMON.
#	2) IMODES33 BIT 1 = 0 (LAMP TEST NOT IN PROGRESS).
#
# ALARMS:  ISS WARNING.
#
# THE FOLLOWING PROGRAM ALARMS WILL SHOW WHICH FAILURE CAUSED THE ISS WARN
#	PROGRAM ALARM 00777	PIPA FAIL
#	PROGRAM ALARM 03777	ICDU FAIL
#	PROGRAM	ALARM 04777	ICDU, PIPA FAILS
#	PROGRAM ALARM 07777	IMU FAIL
#	PROGRAM ALARM 10777	IMU, PIPA FAILS
#	PROGRAM ALARM 13777	IMU, ICDU FAILS
#	PROGRAM ALARM 14777	IMU, ICDU, PIPA FAILS
#
# EXIT: VIA Q.
#
# OUTPUT: ISS WARNING LAMP SET PROPERLY.

SETISSW		CAF	OCT15			# SET ISS WARNING USING THE FAIL BITS IN
		MASK	IMODES30		# BITS 13, 12, AND 10 OF IMODES30 AND THE
		EXTEND				# FAILURE INHIBIT BITS IN POSITIONS
		MP	BIT10			# 4, 3, AND 1.
		CA	IMODES30
		EXTEND
		ROR	LCHAN			# 0 INDICATES FAILURE
		COM
		MASK	OCT15000
		CCS	A
		TCF	ISSWON			# FAILURE.
		
ISSWOFF		CAF	BIT1			# DON'T TURN OFF ISS WARNING IF LAMP TEST
		MASK	IMODES33		# IN PROGRESS.
# Page 180
		CCS	A
		TC	Q
		
		CS	BIT1
		EXTEND
		WAND	DSALMOUT
		TC	Q
		
ISSWON		EXTEND
		QXCH	ITEMP6
		TC	VARALARM		# TELL EVERYONE WHAT CAUSED THE ISS WARNING
		CAF	BIT1
		EXTEND
		WOR	DSALMOUT
		TC	ITEMP6
		
CAGESUB		CS	BITS6&15		# SET OUTBITS AND INTERNAL FLAGS FOR
		EXTEND				# SYSTEM TURN-ON OR CAGE.  DISABLE THE
		WAND	CHAN12			# ERROR COUNTER AND REMOVE THE IMU DELAY COMP.
		CAF	BITS4&5			# SEND ZERO AND COARSE.
		EXTEND
		WOR	CHAN12
		
CAGESUB1	CS	DSPTAB +11D		# TURN ON NO ATT LAMP
		MASK	OC40010
		ADS	DSPTAB +11D
		
CAGESUB2	CS	IMODES30		# SET FLAGS TO INDICATE CAGING OR TURN-ON
		MASK	OCT75			# AND INHIBIT ALL ISS WARNING INFO
		ADS	IMODES30
		
		CS	IMODES33		# DISABLE DAP AUTO AND HOLD MODES
		MASK	BIT6
		ADS	IMODES33
		
		TC	Q
		
IMUFAIL		EQUALS	SETISSW
ICDUFAIL	EQUALS	SETISSW

# Page 181
# JUMP TABLES AND CONSTANTS.

IFAILJMP	TCF	ITURNON			# CHANNEL 30 DISPATCH.
		TCF	IMUFAIL
		TCF	ICDUFAIL
		TCF	IMUCAGE
30RDMSK		OCT	76400			# (BIT 10 NOT SAMPLED HERE).
		TCF	IMUOP
		
C33JMP		TCF	PIPFAIL			# CHANNEL 33 DISPATCH.
		TCF	DNTMFAST
		TCF	UPTMFAST
		
# SUBROUTINE TO SKIP IF LAMP TEST NOT IN PROGRESS.
LAMPTEST	CS	IMODES33		# BIT 1 OF IMODES33 = 1 IF LAMP TEST IN
		MASK	BIT1			# PROGRESS.
		CCS	A
		INCR	Q
		TC	Q
		
33RDMSK		EQUALS	PRIO16
OC40010		OCT	40010
OCT54		OCT	54
OCT75		OCT	75
OCT272		OCT	00272
BITS7&8		OCT	300
OCT1720		OCT	1720
OCT740		OCT	00740
OCT15000	EQUALS	PRIO15
OCT77000	OCT	77000
BITS6&15	OCT	40040
-BIT10		OCT	-1000

90SECS		DEC	9000
120MS		=	OCT14			# (DEC12)
GLOCKOK		EQUALS	RESUME

# Page 182
# PROGRAM NAME:  RRAUTCHK
#
# FUNCITONAL DESCRIPTION:
# RRAUTCHK IS THE RENDEZFOUS RADAR INBIT MONITOR.  INITIALLY THE RR
# POWER ON AUTO (CHAN 33 BIT 2) INBIT IS CHECKED.  IF NO CHANGE, THE
# PROGRAM EXITS TO RRCDUCHK.  IF A CHANGE, RADMOES IS UPDATED
# AND A CHECK MADE IF RR POWER HAS JUST COME ON.  IF JUST OFF, A CHECK
# IS MADE TO SEE IF A PROGRAM WAS USING THE RR (STATE BIT 7).  IF NO,
# THE PROGRAM EXITS TO RRCDUCHK.  IF YES, PROGRAM ALARM 00514
# IS REQUESTED BEFORE EXITING TO RRCDUCHK.  IF RR POWER HAS JUST COME
# ON, A CHECK IS MADE TO SEE IF A PROGRAM WAS USING THE RR (STATE BIT 7)
# SEQUENCE.  IF NO, RADMODES IS UPDATED TO INDICATE RR CDU ZERO AND
# RR TURN-ON SEQUENCE (BITS 13, 1).  A 10 MILLISECOND WAITLIST CALL
# IS THEN SET FOR RRTURNON BEFORE THE PROGRAM EXITS TO NORRGMON.
#
# CALLING SEQUENCE:
# T4RUPT EVERY 480 MILLISECONDS
#
# ERASABLE INITIALIZATION REQUIRED:
# RADMODES, STATE.
#
# SUBROUTINES CALLED:
# WAITLIST.
#
# JOBS OR TASKS INITIATED:
# RRTURNON
#
# ALARMS:  PROGRAM ALARM 00514 -- RADAR GOES OUT OF AUTO MODE WHILE BEING
# USED
#
# EXIT:  RRCDUCHK, NORRGMON

RRAUTCHK	CA	RADMODES			# SEE IF CHANGE IN RR AUTO MODE BIT.
		EXTEND
		RXOR	CHAN33
		MASK	AUTOMBIT
		EXTEND
		BZF	RRCDUCHK
		
		LXCH	RADMODES			# UPDATE RADMODES.
		EXTEND
		RXOR	LCHAN
		MASK	OCT05776			# CLR CONT. DES., REMODE, REPOS, CDUZERO,
		TS	RADMODES			# AND TURNON BITS.
		MASK	BIT2				# SEE IF JUST ON.
		CCS	A
		TCF	RRCDUCHK -3			# OFF.  GO DISABLE RR CDU ERROR COUNTERS.
		CA	OCT10001			# SET RRCDUZRO AND TURNON BITS.
		ADS	RADMODES

# Page 183		
		CAF	ONE
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	RRTURNON
		
		TCF	NORRGMON

OCT05776	OCT	5776

# Page 184
# PROGRAM NAME:	RRCDUCHK
#
# FUNCTIONAL DESCRIPTION:
# RRCDUCHK CHECKS FOR RR CDU FAIL (CHAN 30 BIT 7).  INITIALLY THE
# RR CDU FAIL BIT IS SAMPLED (CHAN 30 BIT 7).  IF NO CHANGE, THE
# PROGRAM EXITS TO RRGIMON.  IF A CHANGE, THE RR AUTO MODE
# (RADMODES BIT 2) BIT IS CHECKED.  IF NOT IN RR AUTO MODE, THE
# PROGRAM EXITS TO NORRGMO0N.  IF IN AUTO MODE, RADMODES BIT 7
# (RR CDU OK) IS UPDATED AND IF P-20 IS OPERATING PROGRAM ALARM 00515 IS
# REQUESTED.  CONTROL IS TRANSFERRED TO SETTRKF TO UPDATE
# THE TRACKER FAIL LAMP (DSPTAB+11D BIT 8).  CONTROL RETURNS TO
# RRGIMON.
#
# CALLING SEQUENCE:
# EVERY 480 MILLISECONDS FROM RRAUTCHK (VIA T4RUPT) UNLESS A
# TURN-ON SEQUENCE HAS JUST BE INITIATED.
#
# ERASABLE INITIALIZATION REQUIRED:
# RADMODES
#
# SUBROUTINES CALLED:
# SETTRKF
#
# JOBS OR TASKS INITIATED:
# NONE
#
# ALARMS:
# TRACKER FAIL
# PROGRAM ALARM 00515 -- RRCDU FAIL DURING P-20
#
# EXIT:
# RRGIMON, NORRGMON

 -3		CS	BIT2
		EXTEND
		WAND	CHAN12			# AT TURNON, DISABLE CDU ERROR COUNTERS.
		
RRCDUCHK	CA	RADMODES		# LAST SAMPLED BIT IN RADMODES.
		EXTEND
		RXOR	CHAN30
		MASK	RCDUFBIT
		EXTEND
		BZF	RRGIMON
		
		CAF	AUTOMBIT		# IF RR NOT IN AUTO MODE, DON'T CHANGE BIT
		MASK	RADMODES		# 7 OF RADMODES.  IF THIS WERE NOT DONE,
		CCS	A			# THE TRACKER FAIL MIGHT COME ON WHEN
		TCF	NORRGMON		# JUST READING LR DATA.
		
		CAF	RCDUFBIT		# SET BIT 7 OF RADMODES FOR SETTRKF.
# Page 185
		LXCH	RADMODES		# UPDATE RADMODES.
		EXTEND
		RXOR	L
		TS	RADMODES

		CA	RADMODES		# DID RR CDU FAIL
		MASK	RCDUFBIT
		CCS	A
		TCF	TRKFLCDU		# NO
		CS	FLAGWRD0		# RNDVFLG P20 OR P22 OPERATING
		MASK	RNDVZBIT
		CCS	A
		TCF	TRKFLCDU		# NO
		TC	ALARM			# YES
		OCT	00515
TRKFLCDU	TC	SETTRKF			# UPDATE TRAKER FAIL LAMP ON DSKY.

# Page 186
# PROGRAM NAME:  RRGIMON
#
# FUNCTIONAL DESCRIPTION:
# RRGIMON IS THE RR GIMBAL LIMIT MONITOR.  INITIALLY THE FOLLOWING IS 
# CHECKED:  REMOD, RR CDU'S BEING ZEROED, REPOSITION, AND RR
# NOT IN AUTO MODE (RADMODES BITS 14, 13, 11, 2).  IF ANY OF THESE
# EXIST THE PROGRAM EXITS TO GPMATRIX.  IF NONE ARE PRESENT RRLIMCHK
# IS CALLED TO SEE IF THE PRESENT RR CDU ANGLES (OPTY, OPTX) ARE WITHIN
# THE LIMITS OF THE CURRENT MODE.  IF WITHIN LIMITS, THE PROGRAM EXITS
# TO NORRGMON.  IF NOT WITHIN LIMITS, THE REPOSITION FLAG (RADMODES
# BIT 11) IS SET, THE RR AUTO TRACKER AND RR ERROR COUNTER
# (CHAN 12 BITS 14, 2) ARE DISABLED, AND A 20 MILLISECOND WAITLIST
# CALL IS SET FOR DORREPOS AFTER WHICH THE PROGRAM EXITS TO NORRGMON.
#
# CALLING SEQUENCE:
# EVERY 480 MILLISECONDS FROM RRCDUCHK (VIA T4RUPT) UNLESS TURN-ON
# HAS JUST BEEN INITIATED VIA RRAUTCHK OR IF THERE HAS BEEN A CHANGE IN
# THE RR CDU FAIL BIT (CHAN 30 BIT 7) AND THE RR IS NOT IN THE AUTO MODE
# (RADMODES BIT 2).
#
# ERASABLE INITIALZATION:  RADMODES
#
# SUBROUTINES CALLED:
# RRLIMCHK, WAITLIST
#
# JOBS OR TASKS INITIATED:
# DORREPOS
#
# ALARMS:
# NONE
#
# EXIT:
# NORRGMON

RRGIMON		CAE	FLAGWRD5			# IS NO ANGLE MONITOR FLAG SET
		MASK	NORRMBIT
		CCS	A
		TCF	NORRGMON			# YES -- SKIP LIMIT CHECK
		CS	FLAGWRD7			# IS SERVICER RUNNING?
		MASK	AVEGFBIT
		CCS	A
		TCF	+5				# NO. DO R25
		CA	FLAGWRD6			# YES. IS MUNFLAG SET?
		MASK	MUNFLBIT
		CCS	A
		TCF	NORRGMON			# YES. DON'T DO R25
 +5		CAF	OCT32002			# INHIBIT BY REMODE, ZEROING, MONITOR.
		MASK	RADMODES			# OR RR NOT IN AUTO.
		CCS	A
		TCF	NORRGMON
# Page 187
		TC	RRLIMCHK			# SET IF ANGLES IN LIMITS.
		ADRES	CDUT

		TCF	MONREPOS

		TCF	NORRGMON			# (ADDITIONAL CODING MAY GO HERE).

MONREPOS	CAF	REPOSBIT			# SET FLAG TO SHOW REPOSITION IN PROGRESS.
		ADS	RADMODES

		CS	OCT20002			# DISABLE TRACKER AND ERROR COUNTER.
		EXTEND
		WAND	CHAN12

		CAF	TWO
		TC	WAITLIST
		EBANK=	LOSCOUNT
		2CADR	DORREPOS
		
		TCF	NORRGMON

OCT32002	OCT	32002
OCT20002	OCT	20002
OCT02100	OCT	02100				# P20, P22 MASK BITS.

# Page 188
# PROGRAM NAME:  GPMATRIX (DAPT4S) MCD. NO. 2 DATE: OCTOBER 27, 1966
#
# AUTHOR:  JOHNATHAN D. ADDLELSTON (ADAMS ASSOCIATES)
#
# MODIFIED:  7FEB. 1968 BY P. S. WEISSMAN TO DELETE COMPUTATION OF MR12 AND MR13, WHICH ARE NO LONGER REQUIRED.
#
# THIS PROGRAM CALCULATES ALL THE SINGLE-PRECISION MATRIX ELEMENTS WHICH ARE USED BY LEM DAP TO TRANSFORM VECTORS
# FROM GIMBAL TO PILOT (BODY) AXES AND BACK AGAIN.  THESE ELEMENTS ARE USED EXCLUSIVELY BY BASIC LANGUAGE ROUTINES
# AND THEREFORE ARE NOT ARRAYED FOR USE BY INTERPRETIVE PROGRAMS.
#
# CALLING SEQUENCE:  GPMATRIX IS TRANSFERRED TO FROM DAPT4S AND IS THUS EXECUTED 4 TIMES A SECOND BY T4RUPT.
# DAPT4S IS LISTED IN T4JUMP TABLE TWICE EXPLICITLY AND ALSO OCCURS AFTER RRAUTCHK (WHICH IS ALSO LISTED TWICE).
#
# SUBROUTINES CALLED: SPSIN, SPCOS.
#
# NORMAL EXIT MODE:  TCF RESUME
#
# ALARM AND ABORT MODES:  NONE.
#
# INPUT: CDUX, CDUY, CDUZ.
#
# OUTPUT:  M11, M21, M32, M22, M32.
#
# AOG = CDUX, AIG = CDUY, AMG = CDUZ: MNEMONIC IS : OIM = XYZ
#
#		*	*	SING(MG)		0			1	*
#		M   =	*	COS(MG)COS(OG)		SIN(OG)			0	*
#		 GP	*	-COS(MG)SIN(OG)		COS(OG)			0	*
#
#		*	*	0			COS(OG)/COS(MG)		-SIN(OG)/COS(MG)	*
#		M   =	*	0			SIN(OG)			COS(OG)			*
#		 PG	*	1			-SIN(MG)COS(OG)/COS(MG)	SIN(MG)SIN(OG)/COS(MG)	*

		EBANK=	M11
DAPT4S		EQUALS	GPMATRIX

# T4RUPT DAP LOGIC:

GPMATRIX	CAE	CDUZ			# SINGLE ENTRY POINT
		TC	SPSIN			# SIN(CDUZ) = SIN(MG)
		TS	M11			# SCALED AT 1
		
		CAE	CDUZ
		TC	SPCOS			# COS(CDUZ) = COS(MG)
		TS	COSMG			# SCALED AT 1 (ONLY A FACTOR)
		
		CAE	CDUX			
		TC	SPSIN			# SIN(CDUX) = SIN(OG)
		TS	M22			# SCALED AT 1 (ALSO IS MR22)
		
		CS	M22
# Page 189
		EXTEND
		MP	COSMG			# -SIN(OG)COS(MG)
		TS	M31			# SCALED AT 1
		
		CAE	CDUX	
		TC	SPCOS			# COS(CDUX) = COS(OG)
		TS	M32			# SCALED AT 1 (ALSO IS MR23)
		
		EXTEND
		MP	COSMG			# COS(OG)COS(MG)
		TS	M21			# SCALED AT 1
		
		TC	RESUME

NORRGMON	EQUALS	DAPT4S		
ENDDAPT4	EQUALS	RESUME