Apollo-11/Luminary099/TRIM_GIMBAL_CNTROL_SYSTEM.agc

# Copyright:	Public domain.
# Filename:	TRIM_GIMBAL_CNTROL_SYSTEM.agc
# Purpose: 	Part of the source code for Luminary 1A build 099.
#		It is part of the source code for the Lunar Module's (LM)
#		Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler:	yaYUL
# Contact:	Ron Burkey <info@sandroid.org>.
# Website:	www.ibiblio.org/apollo.
# Pages:	1472-1485
# Mod history:	2009-05-27 RSB	Adapted from the corresponding
#				Luminary131 file, using page
#				images from Luminary 1A.
#
# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum.  The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum.  Many thanks to both.  The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo.  If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
#	Assemble revision 001 of AGC program LMY99 by NASA 2021112-061
#	16:27 JULY 14, 1969

# Page 1472
		BANK	21
		EBANK=	QDIFF
		SETLOC	DAPS4
		BANK

		COUNT*	$$/DAPGT

# CONTROL REACHES THIS POINT UNDER EITHER OF THE FOLLOWING TWO CONDITIONS ONCE THE DESCENT ENGINE AND THE DIGITAL
# AUTOPILOT ARE BOTH ON:
#	A) THE TRIM GIMBAL CONTROL LAW WAS ON DURING THE PREVIOUS Q,R-AXIS TIME5 INTERRUPT (OR THE DAPIDLER
#	   INITIALIZATION WAS SET FOR TRIM GIMBAL CONTROL AND THIS IS THE FIRST PASS), OR
#	B) THE Q,R-AXES RCS AUTOPILOT DETERMINED THAT THE VEHICLE WAS ENTERING (OR HAD JUST ENTERED) A COAST
#	   ZONE WITH A SMALL OFFSET ANGULAR ACCELERATION.
# GTS IS THE ENTRY TO THE GIMBAL TRIM SYSTEM FOR CONTROLLING ATTITUDE ERRORS AND RATES AS WELL AS ACCELERATIONS.

GTS		CAF	NEGONE		# MAKE THE NEXT PASS THROUGH THE DAP BE
		TS	COTROLER	# 	THROUGH RCS CONTROL,
		CAF	FOUR		#	AND ENSURE THAT IT IS NOT A SKIP.
		TS	SKIPU
		TS	SKIPV

		CAF	TWO
		TS	INGTS		# SET INDICATOR OF GTS CONTROL POSITIVE.
		TS	QGIMTIMR	# SET TIMERS TO 200 MSEC TO AVOID BOTH
		TS	RGIMTIMR	# RUNAWAY AND INTERFERENCE BY NULLING.

# THE DRIVE SETTING ALGORITHM
#
#	DEL = SGN(OMEGA + ALPHA*ABS(ALPHA)/(2*K))
#						    2               1/2                  2       3/2
#	NEGUSUM = ERROR*K + ALPHA*(DEL*OMEGA + ALPHA /(3*K)) + DEL*K   (DEL*OMEGA + ALPHA /(2*K))
#
#	DRIVE = -SGN(NEGUSUM)

		CA	SR		# SAVE THE SR.  SHIFT IT LEFT TO CORRECT
		AD	A		# FOR THE RIGHT SHIFT DUE TO EDITING.
		TS	SAVESR

GTSGO+DN	CAF	TWO		# SET INDEXER FOR R-AXIS CALCULATIONS.
		TCF	GOQTRIMG +1

GOQTRIMG	CAF	ZERO		# SET INDEXER FOR Q-AXIS CALCULATIONS
		TS	QRCNTR
# Page 1473
# RSB 2009 ---------------------------------------------------------------------
# Everything between this line and the similar line below was simply filled-in
# as-is from Luminary 131, and then verified to assemble to the proper binary
# values.  This area is blank on the Luminary 099 print-out, as if the
# printer ribbon had run out.
		INDEX	QRCNTR		# AOS SCALED AT PI/2
		CA	AOSQ
		EXTEND
		MP	BIT2		# RESCALE AOS TO PI/4
		EXTEND
		BZF	GTSQAXIS -3	# USE FULL SCALE FOR LARGER AOS ESTIMATES.

		INDEX	A
		CS	LIMITS		# LIMITS +1 CONTAINS NEGMAX.
		XCH	L		# LIMITS -1 CONTAINS POSMAX.

		CCS	QRCNTR		# PICK UP RATE FOR THIS AXIS.  RATE CELLS
		INDEX	A		# USE ADJACENT, NOT SEPARATED.  AT PI/4
		CA	EDOTQ
GTSQAXIS	DXCH	WCENTRAL

		INDEX	QRCNTR		# COLLECT K FOR THIS AXIS
		CA	KQ
		TS	KCENTRAL

		EXTEND			# CONTROL AUTHORITY ZERO.  AVOID DRIVING
		BZF	POSDRIVE +1	# ENGINE BELL TO THE STOPS.

		INDEX	QRCNTR		# QDIFF, RDIFF ARE STORED IN D.P.
		CAE	QDIFF

ALGORTHM	EXTEND			# Q(R)DIFF IS THETA (ERROR) SCALED AT PI.
		MP	KCENTRAL	# FORM K*ERROR AT PI(2)/2(8), IN D.P.
		LXCH	K2THETA
		EXTEND
		MP	BIT5		# RESCALE TO 4*PI(2)
		DXCH	K2THETA
		EXTEND
		MP	BIT5		# FIRST TERM OF NEGUSUM IN K2THETA.
		ADS	K2THETA +1	# NO CARRY NEEDED	D.P. AT 4*PI(2)

		CS	ACENTRAL	# FORM ALPHA(2)/(2*K) AT 16*PI, IN D.P.,
		EXTEND			# LIMITING QUOTIENT TO AVOID OVERFLOW.
		MP	BIT14		# -ALPHA/2 IN A, SCALED AT PI/4
		EXTEND
		MP	ACENTRAL	# -ALPHA(2)/2 IN A,L, SCALED AT PI(2)/16)
		AD	KCENTRAL
		EXTEND
		BZMF	HUGEQUOT	# K-ALPHA(2)/2 SHOULD BE PNZ FO DIVISION

		EXTEND
		DCS	A		# ALPHA(2)/2 - K
		AD	KCENTRAL
# RSB 2009 ---------------------------------------------------------------------
		EXTEND
		DV	KCENTRAL	# HIGH ORDER OF QUOTIENT.
		XCH	A2CNTRAL
		CA	L		# SHIFT UP THE REMAINDER.
		LXCH	7		# ZERO LOW-ORDER DIVIDEND.
		EXTEND
# Page 1474
		DV	KCENTRAL
		XCH	A2CNTRAL +1	# QUOTIENT STORED AT 16*PI, D.P.
		TCF	HAVEQUOT

HUGEQUOT	CA	POSMAX
		TS	L
		DXCH	A2CNTRAL	# LIMITED QUOTIENT STORED AT 16*PI, D.P.

HAVEQUOT	CA	WCENTRAL
		EXTEND
		MP	BIT9		# RESCALE OMEGA AT 16*PI IN D.P.
		DXCH	K2CNTRAL	# LOWER WORD OVERLAYS OMEGA IN WCENTRAL

		EXTEND
		DCA	K2CNTRAL
		DXCH	FUNCTION

		CA	ACENTRAL	# GET ALPHA*ABS(ALPHA)/(2*K)
		EXTEND
		BZMF	+4

		EXTEND
		DCA	A2CNTRAL
		TCF	+3

		EXTEND
		DCS	A2CNTRAL

		DAS	FUNCTION	# OMEGA + ALPHA*ABS(ALPHA)/(2*K) AT 16*PI

		CCS	FUNCTION	# DEL = +1 FOR FUNCT1 GREATER THAN ZERO.
		TCF	POSFNCT1	# OTHERWISE DEL = -1
		TCF	+2
		TCF	NEGFNCT1

		CCS	FUNCTION +1	# USE LOW ORDER WORD SINCE HIGH IS ZERO
POSFNCT1	CAF	BIT1
		TCF	+2
NEGFNCT1	CS	BIT1
		TS	DEL

		CCS	DEL		# REPLACE OMEGA BY DEL*OMEGA
		TCF	FUNCT2		# POSITIVE DEL VALUE.  PROCEED.
		TCF	DEFUNCT
		TCF	NEGFNCT2

DEFUNCT		TS	K2CNTRAL
		TS	K2CNTRAL +1
		TCF	FUNCT2

# Page 1475
NEG1/3		DEC	-.33333

NEGFNCT2	EXTEND
		DCS	K2CNTRAL
		DXCH	K2CNTRAL

FUNCT2		EXTEND
		DCA	A2CNTRAL
		DAS	K2CNTRAL	# DEL*OMEGA + ALPHA(2)/(2*K) AT 16*PI, D.P.

FUNCT3		CA	A2CNTRAL
		EXTEND
		MP	NEG1/3
		DXCH	A2CNTRAL
		CA	L
		EXTEND
		MP	NEG1/3
		ADS	A2CNTRAL +1
		TS	L
		TCF	+2		# A2CNTRAL NOW CONTAINS -ALPHA(2)/(6*K),
		ADS	A2CNTRAL	# SCALED AT 16*PI, IN D.P.

		EXTEND
		DCA	K2CNTRAL	# DEL*OMEGA + ALPHA(2)/(3*K) IN A2CNTRAL,
		DAS	A2CNTRAL	# SCALED AT 16*PI, D.P.

		CA	A2CNTRAL
		EXTEND
		MP	ACENTRAL
		DAS	K2THETA
		CA	A2CNTRAL +1
		EXTEND
		MP	ACENTRAL	# ACENTRAL MAY NOW BE OVERLAID.
		ADS	K2THETA +1
		TS	L
		TCF	+2		# TWO TERMS OF NEGUSUM ACCUMULATED, SO FAR
		ADS	K2THETA		# SCALED AT 4*PI(2), IN D.P.

GETROOT		CA	K2CNTRAL	# K*(DEL*OMEGA + ALPHA(2)/(2*K)) IS THE
		EXTEND			# TERM FOR WHICH A SQUARE ROOT IS NEEDED.
		MP	KCENTRAL	# K AT PI/2(8)
		DXCH	FUNCTION
		CA	K2CNTRAL +1
		EXTEND
		MP	KCENTRAL
		ADS	FUNCTION +1
		TS	L
		TCF	+2
		ADS	FUNCTION	# DESIRED TERM IN FUNCTION, AT PI(2)/16
# Page 1476
		CCS	DEL
		TCF	RSTOFGTS
		TCF	NEGUSUM
		TCF	NEGATE
		TCF	NEGUSUM

NEGATE		EXTEND
		DCS	K2CNTRAL
		DXCH	K2CNTRAL
		TCF	RSTOFGTS

		BANK	16
		EBANK=	NEGUQ
		SETLOC	DAPS1
		BANK

# THE WRCHN12 SUBROUTINE SETS BITS 9,10,11,12 OF CHANNEL 12 ON THE BASIS OF THE CONTENTS OF NEGUQ,NEGUR WHICH ARE
# THE NEGATIVES OF THE DESIRED ACCELERATION CHANGES.  ACDT+C12 SETS Q(R)ACCDOT TO REFLECT THE NEW DRIVES.
#
# WARNING:  ACDT+C12 AND WRCHN12 MUST BE CALLED WITH INTERRUPT INHIBITED.

BGIM		OCTAL	07400
CHNL12		EQUALS	ITEMP6
ACDT+C12	CS	NEGUQ
		EXTEND			# GIMBAL DRIVE REQUESTS.
		MP	ACCDOTQ
		LXCH	QACCDOT
		CS	NEGUR
		EXTEND
		MP	ACCDOTR
		LXCH	RACCDOT

		CCS	NEGUQ
		CAF	BIT10
		TCF	+2
		CAF	BIT9
		TS	CHNL12

		CCS	NEGUR
		CAF	BIT12
		TCF	+2
		CAF	BIT11
		ADS	CHNL12		# (STORED RESULT NOT USED AT PRESENT)

		CS	BGIM
		EXTEND
		RAND	CHAN12
		AD	CHNL12
		EXTEND
		WRITE	CHAN12
# Page 1477
		CS	CALLGMBL	# TURN OFF REQUEST FOR ACDT+C12 EXECUTION.
		MASK	RCSFLAGS
		TS	RCSFLAGS

		TC	Q		# RETURN TO CALLER.

		BANK	21
		EBANK=	QDIFF
		SETLOC	DAPS4
		BANK

# Page 1478
# SUBROUTINE TIMEGMBL:	MOD 0, OCTOBER 1967, CRAIG WORK
#
# TIMEGMBL COMPUTES THE DRIVE TIME NEEDED FOR THE TRIM GIMBAL TO POSITION THE DESCENT ENGINE NOZZLE SO AS TO NULL
# THE OFFSET ANGULAR ACCELERATION ABOUT THE Q (OR R) AXIS.  INSTEAD OF USING AOSQ(R), TIMEGMBL USES .4*AOSQ(R),
# SCALED AT PI/8.  FOR EACH AXIS, THE DRIVE TIME IS COMPUTED AS ABS(ALPHA/ACCDOT).  A ZERO
# ALPHA OR ACCDOT OR A ZERO QUOTIENT TURNS OFF THE GIMBAL DRIVE IMMEDIATELY.  OTHERWISE, THE GIMBAL IS TURNED ON
# DRIVING IN THE CORRECT DIRECTION.  THE Q(R)GIMTIMR IS SET TO TERMINATE THE DRIVE AND Q(R)ACCDOT
# IS STORED TO REFLECT THE NEW ACCELERATION DERIVATIVE.  NEGUQ(R) WILL CONTAIN +1,+0,-1 FOR A Q(R)ACCDOT VALUE
# WHICH IS NEGATIVE, ZERO, OR POSITIVE.
#
# INPUTS:	AOSQ,AOSR, SCALED AT P1/2, AND ACCDOTQ, ACCDOTR AT PI/2(7).	PI/2(7).
#
# OUTPUTS:	NEW GIMBAL DRIVE BITS IN CHANNEL 12, NEGUQ, NEGUR, QACCDOT, AND RACCDOT, THE LAST SCALED AT PI/2(7).
#		Q(R)GIMTIMR WILL BE SET TO TIME AND TERMINATE GIMBAL DRIVE(S).
#
# DEBRIS:	A, L, Q, ITEMPS 2, 3, 6, AND RUPTREG2 AND ACDT+C12 DEBRIS.
#
# EXITS:	VIA TC Q.
#
# ALARMS, ABORTS:  NONE.
#
# SUBROUTINES:	ACDT+C12, IBNKCALL
#
# WARNING:	THIS SUBROUTINE WRITES INTO CHANNEL 12 AND USES THE ITEMPS.  THEREFORE IT MAY ONLY BE CALLED WITH
# 		INTERRUPT INHIBITED.
#
# ERASABLE STORAGE CONFIGURATION (NEEDED BY THE INDEXING METHODS):
#	NEGUQ		ERASE	+2		# NEGATIVE OF Q-AXIS GIMBAL DRIVE
#	(SPWORD)	EQUALS	NEGUQ +1	# ANY S.P. ERASABLE NUMBER, NOW THRSTCMD
#	NEGUR		EQUALS	NEGUQ +2	# NEGATIVE OF R-AXIS GIMBAL DRIVE
#	ACCDOTQ		ERASE	+2		# Q-JERK TERM SCALED AT PI/2(7) RAD/SEC(3)
#	(SPWORD)	EQUALS 	ACCDOTQ +1	# ANY S.P. ERASABLE NUMBER NOW QACCDOT
#	ACCDOTR		EQUALS	ACCDOTQ +2	# R-JERK TERM SCALED AT PI/2(7) RAD/SEC(3)
#						# ACCDOTQ, ACCDOTR ARE MAGNITUDES.
#	AOSQ		ERASE	+4		# Q-AXIS ACC., D.P. AT PI/2 R/SEC(2)
#	AOSR		EQUALS	AOSQ +2		# R-AXIS ACCELERATION SCALED AT PI/2 R/S2

QRNDXER		EQUALS	ITEMP6
OCT23146	OCTAL	23146			# DECIMAL .6
NZACCDOT	EQUALS	ITEMP3

TIMEGMBL	CAF	ONE			# INITIALZE ALLOWGTS.
		TS	ALLOWGTS

		CAF	TWO			# SET UP LOOP FOR R AXIS.
		LXCH	Q			# SAVE RETURN ADDRESS.
		LXCH	RUPTREG2
# Page 1479
		TCF	+2
TIMQGMBL	CAF	ZERO			# NOW DO THE Q-AXIS
		TS	QRNDXER
		INDEX	QRNDXER
		CA	ACCDOTQ			# ACCDOT IS PRESUMED TO BE AT PI/2(7).
		EXTEND
		BZMF	TGOFFNOW		# IS ACCDOT LESS THAN OR EQUAL TO 0?
		TS	NZACCDOT		# NO.  STORE NON-ZERO, POSITIVE ACCDOT.

ALPHATRY	INDEX	QRNDXER
		CS	AOSQ
		EXTEND
		BZF	TGOFFNOW		# IS ALPHA ZERO?

		TS	Q			# SAVE A COPY OF -AOS.
		EXTEND				# NO.  RESCALE FOR TIMEGMBL USE.
		MP	OCT23146		# OCTAL 23146 IS DECIMAL .6
		AD	Q			# -1.6*AOS AT PI/2 = -.4*AOS AT PI/8
		TS	L			# WAS THERE OVERFLOW?
		TCF	SETNEGU			# NO.  COMPUTE DRIVE TIME.

		CS	A			# RECOVER -SGN(AOS) IN THE A REGISTER.
		INDEX	QRNDXER			# YES.  START DRIVE WITHOUT WAITLIST.
		XCH	NEGUQ
		TCF	NOTALLOW		# KNOCK DOWN THE ALLOWGTS FLAG.

SETNEGU		EXTEND
		BZMF	POSALPH

		COM
		TS	ITEMP2			# STORE -ABS(.4*AOS) SCALED AT PI/8.
		CS	BIT1
		TCF	POSALPH +2
POSALPH		TS	ITEMP2			# STORE -ABS(.4*AOS) SCALED AT PI/8.
		CA	BIT1
	+2	INDEX	QRNDXER			# SGN(AOS) INTO NEGU
		TS	NEGUQ			# STORE SGN(ALPHA) AS NEGU

		CA	NZACCDOT
		EXTEND
		MP	BIT12			# 2*ACCDOT, SCALED AT PI/8.
		AD	ITEMP2			# -ABS(ALPHS) + 2*ACCDOT, AT PI/8.
		EXTEND
		BZMF	NOTALLOW		# IS DRIVE TIME MORE THAN TWO SECONDS?
		CS	ITEMP2			# NO.  COMPUTE DRIVE TIME.
		EXTEND				# ABS(ALPHA) AT PI/8.
		MP	OCT00240		# DECIMAL 10/1024
		EXTEND				# QUOTIENT IS DRIVE TIME AT WAITLIST.
		DV	NZACCDOT		# ABS(ALPHA)/ACCDOT AT 2(14)/100
# Page 1480
		EXTEND
		BZF	TGOFFNOW		# DRIVE TIME MUST BE GREATER THAN ZERO.

		TCF	DRIVEON

TGOFFNOW	CAF	ZERO			# TURN OFF GIMBAL NOW.
		INDEX	QRNDXER
		TS	NEGUQ

		TCF	DONEYET

NOTALLOW	CAF	OCT31
		INDEX	QRNDXER
		TS	QGIMTIMR
		CAF	ZERO			# DRIVE TIME IS MORE THAN 2 SECONDS, SO
		TS	ALLOWGTS		# DO NOT PERMIT FURTHER GTS ATTITUDE-RATE
						# CONTROL UNTIL AOSTASK APPROVES.
		TCF	DONEYET			# NO WAITLIST CALL IS MADE.

DRIVEON		INDEX	QRNDXER
		TS	QGIMTIMR		# CHOOSE Q OR R AXIS.

DONEYET		CCS	QRNDXER
		TCF	TIMQGMBL

		DXCH	RUPTREG3		# PROTECT IBNKCALL ERASABLES.  ACDT+C12
		DXCH	ITEMP2			# LEAVES ITEMPS2,3 ALONE.

		TC	IBNKCALL		# TURN OFF CHANNEL BITS, SET Q(R)ACCDOTS.
		CADR	ACDT+C12

		DXCH	ITEMP2			# RESTORE ERASABLES FOR IBNKCALL.
		DXCH	RUPTREG3

		TC	RUPTREG2		# RETURN TO CALLER.

OCT00240	OCTAL	00240			# DECIMAL 10/1024

# Page 1481
# THE FOLLOWING SECTION IS A CONTINUATION OF THE TRIM GIMBAL CONTROL FROM THE LAST GTS ENTRY.  THE QUANTITY NEGUSUM
# IS COMPUTED FOR EACH AXIS (Q,R), .707*DEL*FUNCTION(3/2) + K2THETA = NEGUSUM.  NEW DRIVES ARE ENTERED TO CH 12.
#
# THE SUBROUTINE GTSQRT ACCEPTS A DOUBLE PRECISION VALUE IN FUNCTION, FUNCTION +1 AND RETURNS A SINGLE-PRECISION
# SQUARE ROOT OF THE FOURTEEN MOST SIGNIFICANT BITS OF THE ARGUMENT.  ALSO, THE CELL SHFTFLAG CONTAINS A BINARY
# EXPONENT S, SUCH THAT THE SQUARE ROOT (RETURNED IN THE A REGISTER) MUST BE SHIFTED RIGHT (MULTIPLIED BY 2 TO THE
# POWER (-S)) IN ORDER TO BE THE TRUE SQUARE ROOT OF THE FOURTEEN MOST SIGNIFICANT BITS OF FUNCTION, FUNCTION +1.
# SQUARE ROOT ERROR IS NOT MORE THAN 2 IN THE 14TH SIGNIFICANT BIT.  CELLS CLOBBERED ARE A, L, SHFTFLAG, ININDEX,
# HALFARG, SCRATCH, SR, FUNCTION, FUNCTION +1.  GTSQRT IS CALLED BY TC GTSQRT AND RETURNS VIA TC Q OR TC FUNCTION +1.
# ZERO OR NEGATIVE ARGUMENTS YIELD ZERO FOR SQUARE ROOTS.

GTSQRT		CCS	FUNCTION
		TCF	GOODARG		# FUNCTION IS POSITIVE.  TAKE SQUARE ROOT.
		TCF	+2		# HIGH ORDER WORD IS ZERO.  TRY THE LOWER.
		TCF	ZEROOT		# NEGATIVE.  USE ZERO FOR 1/2 POWER.

		CA	FUNCTION +1
		EXTEND
		BZMF	ZEROOT

		TCF	ZEROHIGH	# PROCEED.
ZEROOT		CA	ZERO
		TS	SHFTFLAG
		TC	Q

ZEROHIGH	XCH	FUNCTION	# 14 MOST SIGNIFICANT BITS ARE IN THE
		XCH	FUNCTION +1	# LOWER WORD.  EXCHANGE THEM.
		CA	SEVEN
		TCF	GOODARG +1

GOODARG		CA	ZERO
		TS	SHFTFLAG
		CA	TWELVE		# INITIALIZE THE SCALING LOOP.
		TS	ININDEX
		TCF	SCALLOOP

SCALSTRT	CA	FUNCTION
		TCF	SCALDONE

MULBUSH		CA	NEG2		# IF ARG IS NOT LESS THAN 1/4, INDEX IS
		ADS	ININDEX		# ZERO, INDICATING NO SHIFT NEEDED.
		EXTEND			# BRANCH IF ARG IS NOT LESS THAN 1/4.
		BZMF	SCALSTRT	# OTHERWISE COMPARE ARG WITH A REFERENCE
					# WHICH IS 4 TIMES LARGER THAN THE LAST.
SCALLOOP	CS	FUNCTION
		INDEX	ININDEX
		AD	BIT15		# REFERENCE MAGNITUDE LESS OR EQUAL TO 1/4
		EXTEND
		BZMF	MULBUSH		# IF ARG IS NOT LESS THAN REFERENCE, GO
					# AROUND THE MULBERRY BUSH ONCE MORE.
# Page 1482
		INDEX	ININDEX
		CA	BIT15		# THIS IS THE SCALE MAGNITUDE
		XCH	HALFARG		# 2**(-ININDEX) IS THE SHIFT DIVISOR.
		EXTEND			# RESCALE ARGUMENT.
		DCA	FUNCTION
		EXTEND
		DV	HALFARG
					# ININDEX AND SHFTFLAG PRESERVE INFO FOR
					# RESCALING AFTER ROOT PROCESS.
SCALDONE	EXTEND
		QXCH	FUNCTION +1	# SAVE Q FOR RETURN
		EXTEND
		MP	BIT14
		TS	HALFARG
		MASK	BIT13
		CCS	A
		CA	OCT11276
		AD	ROOTHALF	# INITIAL GUESS IS ROOT 1/2 OR POSMAX
		TC	ROOTCYCL
		TC	ROOTCYCL
		TC	ROOTCYCL
		TC	FUNCTION +1

# ***************************************************************************

RSTOFGTS	TC	GTSQRT
PRODUCT		XCH	K2CNTRAL
		EXTEND
		MP	K2CNTRAL
		DXCH	K2CNTRAL
		EXTEND			#		THE PRODUCT OF
		MP	L		#  1/2                   2       1/2
		ADS	K2CNTRAL +1	# K   *(DEL*OMEGA + ALPHA /(2*K))
		TS	L		#		      AND
		TCF	+2		#                       2
		ADS	K2CNTRAL	# DEL*(DEL*OMEGA + ALPHA /(2*K)) NOW IN
					# K2CNTRAL

DOSHIFT		CA	ININDEX
		EXTEND			# MULTIPLY IN THE FACTOR 2(-S), RETURNED
		MP	BIT14		# BY THE GTSQRT SUBROUTINE
		ADS	SHFTFLAG
		EXTEND
		BZF	ADDITIN
		INDEX	SHFTFLAG
		CA	BIT15
# Page 1483
		XCH	K2CNTRAL
		EXTEND
		MP	K2CNTRAL
		DAS	K2THETA
		XCH	K2CNTRAL
		EXTEND
		MP	K2CNTRAL +1
		ADS	K2THETA +1
		TS	L
		TCF	+2
		ADS	K2THETA

		TCF	NEGUSUM

ADDITIN		EXTEND
		DCA	K2CNTRAL
		DAS	K2THETA		# NO ADD IN THE K2THETA TERM.
NEGUSUM		CCS	K2THETA		# TEST SIGN OF HIGH ORDER PART.
		TCF	NEGDRIVE
		TCF	+2
		TCF	POSDRIVE

		CCS	K2THETA +1	# SIGN TEST FOR LOW ORDER PART.
NEGDRIVE	CA	BIT1
		TCF	+2		# STOP GIMBAL DRIVE FOR A ZERO NEGUSUM.
POSDRIVE	CS	BIT1
		TS	L		# SAVE FOR DRIVE REVERSAL TEST.
		INDEX	QRCNTR
		XCH	NEGUQ

		EXTEND
		MP	L		# MULTIPLY OLD NEGU AND NEW NEGU.
		CCS	L
		TCF	LOUPE		# NON-ZERO GIMBAL DRIVE BEING CONTINUED.

		TCF	ZEROLOUP	# NO REVERSAL PROBLEM HERE.

		TCF	REVERSAL	# NON-ZERO GIMBAL DRIVE BEING REVERSED.
		TCF	ZEROLOUP	# NO REVERSAL PROBLEM HERE.

REVERSAL	INDEX	QRCNTR		# A ZERO-DRIVE PAUSE IS NEEDED HERE.  ZERO
		TS	QACCDOT		# IS IN A REGISTER FROM CCS ON (-1).
		INDEX	QRCNTR
		CS	GMBLBITA
		EXTEND
		WAND	CHAN12

ZEROLOUP	CS	RCSFLAGS	# SET UP REQUEST FOR ACDT+C12 CALL.
		MASK	CALLGMBL
		ADS	RCSFLAGS
# Page 1484
LOUPE		CCS	QRCNTR		# HAVE BOTH AXES BEEN PROCESSED?
		TCF	GOQTRIMG	# NO.  DO Q AXIS NEXT.

		CA	SAVESR		# RESTORE THE SR
		TS	SR

GOCLOSE		EXTEND			# TERMINATE THE JASK.
		DCA	CLOSEADR
		DTCB

		EBANK=	AOSQ
CLOSEADR	2CADR	CLOSEOUT	# TERMINATE THE JASK.

TWELVE		EQUALS	OCT14
ROOTHALF	OCTAL	26501		# SQUARE ROOT OF 1/2
GMBLBITA	OCTAL	01400		# INDEXED WRT GMBLBITB	DO NOT MOVE *******
OCT11276	OCTAL	11276		# POSMAX -- ROOTHALF
GMBLBITB	OCTAL	06000		# INDEXED WRT GMBLBITA	DO NOT MOVE *******

# SUBROUTINE ROOTCYCL:	BY CRAIG WORK, 3 APRIL 68
#
# ROOTCYCL IS A SUBROUTINE WHICH EXECUTES ONE NEWTON SQUARE ALGORITHM ITERATION.  THE INITIAL GUESS AT THE
# SQUARE ROOT IS PRESUMED TO BE IN THE A REGISTER AND ONE-HALF THE SQUARE IS TAKEN FROM HALFARG.  THE NEW APPROXIMATION
# TO THE SQUARE ROOT IS RETURNED IN THE A REGISTER.  DEBRIS:  A, L, SR, SCRATCH.  ROOTCYCL IS CALLED FROM
# LOCATION (LOC) BY A TC ROOTCYCL, AND RETURNS (TC Q) TO LOC +1.
#
# WARNING:  IF THE INITIAL GUESS IS NOT GREATER THAN THE SQUARE, DIVIDE OR ADD OVERFLOW IS A REAL POSSIBILITY.

ROOTCYCL	TS	SCRATCH		# STORE X
		TS	SR		# X/2 NOW IN SR
		CA	HALFARG		# ARG/2 IN THE A REG
		ZL			# PREPARE FOR DIVISION
		EXTEND
		DV	SCRATCH		# (ARG/X)/2
		AD	SR		# (X + ARG/X)/2 IN THE A REG
		TC	Q