660 lines
15 KiB
Plaintext
660 lines
15 KiB
Plaintext
# Copyright: Public domain.
|
|
# Filename: SXTMARK.agc
|
|
# Purpose: Part of the source code for Comanche, build 055. It
|
|
# is part of the source code for the Command Module's
|
|
# (CM) Apollo Guidance Computer (AGC), Apollo 11.
|
|
# Assembler: yaYUL
|
|
# Reference: pp. 222-235
|
|
# Contact: Ron Burkey <info@sandroid.org>,
|
|
# Fabrizio Bernardini <fabrizio@spacecraft.it>
|
|
# Website: http://www.ibiblio.org/apollo.
|
|
# Mod history: 16/05/09 FB Transcription Batch 2 Assignment.
|
|
#
|
|
# The contents of the "Comanche055" files, in general, are transcribed
|
|
# from scanned documents.
|
|
#
|
|
# Assemble revision 055 of AGC program Comanche by NASA
|
|
# 2021113-051. April 1, 1969.
|
|
#
|
|
# This AGC program shall also be referred to as Colossus 2A
|
|
#
|
|
# Prepared by
|
|
# Massachusetts Institute of Technology
|
|
# 75 Cambridge Parkway
|
|
# Cambridge, Massachusetts
|
|
#
|
|
# under NASA contract NAS 9-4065.
|
|
#
|
|
# Refer directly to the online document mentioned above for further
|
|
# information. Please report any errors to info@sandroid.org.
|
|
|
|
# Page 222
|
|
# PROGRAM NAME - SXTMARK DATE- 5 APRIL 1967
|
|
# PROGRAM MODIFIED BY 258/278 PROGRAMMERS LOG SECTION SXTMARK
|
|
# MOD BY- R. MELANSON TO ADD DOCUMENTATION ASSEMBLY SUNDISK REV. 116
|
|
|
|
# FUNCTIONAL DESCRIPTION-
|
|
# SXTMARK IS CALLED FROM INTERNAL ROUTINES WHICH MAY REQUIRE STAR OR LANDMARK MARKINGS BY THE ASTRONAUT. IF
|
|
# THE MARK SYSTEM IS NOT IN USE, SXTMARK RESERVES A VAC AREA FOR MARKING AND REQUESTS EXECUTION OF THE MKVB51
|
|
# ROUTINE VIA THE EXECUTIVE JOB PRIORITY LIST. R21 USES THIS ROUTINE TO DETERMINE IF THE MARK SYSTEM CAN BE
|
|
# USED. IF YES, SXTMARK RETURNS TO R21 TO PERFORM ITS OWN MARK REQUESTS VIA THE V51 FLASH.
|
|
|
|
# CALLING SEQUENCE-
|
|
|
|
# CAF (NO. MARK REQUESTS IN BITS 1-3 OF A)
|
|
# TC BANKCALL
|
|
# CADR SXTMARK
|
|
|
|
# NORMAL EXIT MODE-
|
|
# SWRETURN
|
|
|
|
# ALARM OR ABORT EXIT MODE-
|
|
# ABORT
|
|
|
|
# OUTPUT-
|
|
# 1) MARKSTAT CONTAINS MARK VALUE (BITS 14-12) AND VAC AREA ADDRESS
|
|
# 2) QPRET = VAC AREA POINTER VALUE
|
|
# 3) 1ST WORD OF RESERVED VAC AREA SET TO +0
|
|
# 4) PRIO32 PLACED IN A REGISTER
|
|
|
|
# ERASABLE INITIALIZATION-
|
|
# 1) BITS 1-3 OF A = NO. MARKS REQUESTED
|
|
# 2) BITS 2,3 OF EXTVBACT =0
|
|
# 3) A VAC AREA MUST BE AVAILABLE (WORD 1 = ADDRESS OF VAC AREA)
|
|
|
|
# DEBRIS-
|
|
# A,Q,L,RUPTREG1,MARKSTAT,QPRET,BIT2 OF EXTVBACT
|
|
|
|
BANK 13
|
|
SETLOC SXTMARKE
|
|
BANK
|
|
|
|
EBANK= MRKBUF1
|
|
COUNT 07/SXTMK
|
|
|
|
SXTMARK INHINT
|
|
TS RUPTREG1 # NUMBER OF MARKS WANTED
|
|
|
|
CAF SIX # BIT2 = MARKING SYSTEM IN USE
|
|
MASK EXTVBACT # BIT3 = EXTENDED VERB IN PROGRESS
|
|
CCS A
|
|
TC MKABORT # SET THEREFORE ABORT
|
|
# Page 223
|
|
CAF BIT2 # NOT SET
|
|
ADS EXTVBACT # SET IT, RESET IN ENDMARK
|
|
TC MARKOK # YES, FIND VAC AREA
|
|
|
|
MKABORT TC BAILOUT
|
|
OCT 01211
|
|
MARKOK CCS VAC1USE # FIND VAC AREA
|
|
TC MKVACFND
|
|
CCS VAC2USE
|
|
TC MKVACFND
|
|
CCS VAC3USE
|
|
TC MKVACFND
|
|
CCS VAC4USE
|
|
TC MKVACFND
|
|
CCS VAC5USE
|
|
TC MKVACFND
|
|
TC BAILOUT
|
|
OCT 01207
|
|
|
|
MKVACFND AD TWO # ADDRESS OF VAC AREA
|
|
TS MARKSTAT
|
|
INDEX A
|
|
TS QPRET # STORE NEXT AVAILABLE MARK SLOT
|
|
|
|
CAF ZERO # STORE VAC AREA OCCUPIED
|
|
INDEX MARKSTAT
|
|
TS 0 -1
|
|
|
|
TC CHECKMM # BACKUP MARK ROUTINE USES SXTMARK
|
|
MM 53
|
|
TCF +2
|
|
TCF SWRETURN
|
|
TC CHECKMM
|
|
MM 54
|
|
TCF +2
|
|
TCF SWRETURN
|
|
CAF BIT12 # DESIRED NUMBER OF MARKS IN 12-14
|
|
EXTEND
|
|
MP RUPTREG1
|
|
XCH L
|
|
ADS MARKSTAT
|
|
|
|
CAF PRIO32 # ENTER MARK JOB
|
|
TC NOVAC
|
|
EBANK= MARKSTAT
|
|
2CADR MKVB51
|
|
|
|
RELINT
|
|
TCF SWRETURN # SAME AS MODEEXIT
|
|
|
|
# Page 224
|
|
# PROGRAM NAME - MKRELEAS DATE- 5 APRIL 1967
|
|
# PROGRAM MODIFIED BY 248/278 PROGRAMMERS LOG SECTION SXTMARK
|
|
# MOD BY- R. MELANSON TO ADD DOCUMENTATION ASSEMBLY SUNDISK REV. 116
|
|
|
|
# FUNCTIONAL DESCRIPTION-
|
|
# MKRELEAS IS EXECUTED BY INTERNAL ROUTINES TO RELEASE THE MARK SYSTEM TO MAKE IT AVAILABLE TO OTHER INTERNAL
|
|
# SYSTEM ROUTINES. IT ALSO CLEARS THE COARSE OPTICS FLAG BIT AND DISABLES THE OPTICS ERROR COUNTER.
|
|
|
|
# CALLING SEQUENCE-
|
|
|
|
# TC BANKCALL
|
|
# CADR MKRELEAS
|
|
|
|
# NORMAL EXIT MODE-
|
|
# SWRETURN
|
|
|
|
# ALARM OR ABORT EXIT MODE- NONE
|
|
|
|
# OUTPUT-
|
|
# 1) BIT9 OPTMODES SET TO 0
|
|
# 2) OPTIND SET TO -1
|
|
# 3) 1ST WORD OF VAC AREA SET TO VAC ADDRESS TO SIGNIFY AVAILABILITY.
|
|
# 4) MARKSTAT CLEARED
|
|
# 5) BIT2 CHANNEL 12 SET TO 0
|
|
|
|
# ERASABLE INITIALIZATION- NONE
|
|
|
|
# DEBRIS-
|
|
# A,MARKSTAT,BIT9,OPTMODES OPTIND,BIT2 CHANNEL 12
|
|
|
|
MKRELEAS CAF ZERO # SHOW MARK SYSTEM NOW AVAILABLE
|
|
XCH MARKSTAT
|
|
MASK LOW9
|
|
CCS A
|
|
INDEX A
|
|
TS 0
|
|
MKRLEES INHINT
|
|
CS BIT9 # COARSE OPTICS RETURN FLAG.
|
|
MASK OPTMODES
|
|
TS OPTMODES
|
|
|
|
CA NEGONE
|
|
TS OPTIND # KILL COARSE OPTICS
|
|
|
|
CS BIT2 # DISABLE OPTICS ERROR COUNTER
|
|
EXTEND
|
|
WAND CHAN12
|
|
|
|
RELINT
|
|
TC SWRETURN
|
|
# Page 225
|
|
# PROGRAM NAME - MARKRUPT DATE- 5 APRIL 1967
|
|
# PROGRAM MODIFIED BY 258/278 PROGRAMMERS LOG SECTION SXTMARK
|
|
# MOD BY- R. MELANSON TO ADD DOCUMENTATION ASSEMBLY SUNDISK REV. 116
|
|
|
|
# FUNCTIONAL DESCRIPTION-
|
|
# MARKRUPT STORES CDUS,OPTICS AND TIME AND TRANSFERS CONTROL TO THE MARKIT,MARK REJECT OR KEYCOM ROUTINES IF
|
|
# BITS IN CHANNEL 16 ARE SET AS REQUIRED.
|
|
|
|
# CALLING SEQUENCE-
|
|
# ROUTINE ENTERED VIA KEYRUPT2 WHEN MARK,MARK REJECT OR DSKY KEYS DEPRESSED BY THE OPERATOR.
|
|
|
|
# NORMAL EXIT MODE-
|
|
# MARKIT, MKREJECT, OR POSTJUMP ROUTINES (MARK,MARK REJECT, OR DSKY CODE)
|
|
|
|
# ALARM OR ABORT EXIT MODE-
|
|
# ALARM AND RESUME
|
|
|
|
# OUTPUT-
|
|
# RUPTSTOR+5 = CDUT, RUPTSTOR+3 = CDUS, RUPTSTOR+2 = CDUY,
|
|
# RUPTREG3 = CDUZ, RUPTSTOR+6 = CDUX, RUPTSTOR+1 AND SAMPTIME+1 =TIME1,
|
|
# RUPTSTOR AND SAMPTIME = TIME2
|
|
|
|
# ERASABLE INITIALIZATION-
|
|
# CDUT,CDUS,CDUY,CDUZ,CDUX,TIME2,TIME1,CHANNEL 16 BITS 6,7 OR 1-5
|
|
|
|
# DEBRIS-
|
|
# A,QRUPT,RUPTREG3,SAMPTIME,SAMPTIME+1,RUPTSTOR TO RUPTSTOR+6 EXCEPT RUPTSTOR+4 (LOCATION 67)
|
|
|
|
MARKRUPT TS BANKRUPT # STORE CDUS AND OPTICS NOW
|
|
CA CDUT
|
|
TS MKCDUT
|
|
CA CDUS
|
|
TS MKCDUS
|
|
CA CDUY
|
|
TS MKCDUY
|
|
CA CDUZ
|
|
TS MKCDUZ
|
|
CA CDUX
|
|
TS MKCDUX
|
|
EXTEND
|
|
DCA TIME2 # GET TIME
|
|
DXCH MKT2T1
|
|
EXTEND
|
|
DCA MKT2T1
|
|
DXCH SAMPTIME # RUPT TIME FOR NOUN 65.
|
|
|
|
XCH Q
|
|
TS QRUPT
|
|
|
|
CAF BIT6 # SEE IF MARK OR MKREJECT
|
|
# Page 226
|
|
EXTEND
|
|
RAND NAVKEYIN
|
|
CCS A
|
|
TC MARKIT # ITS A MARK
|
|
|
|
CAF BIT7 # NOT A MARK, SEE IF MKREJECT
|
|
EXTEND
|
|
RAND NAVKEYIN
|
|
CCS A
|
|
TC MKREJECT # ITS A MARK REJECT
|
|
|
|
KEYCALL CAF OCT37 # NOT MARK OR MKREJECT, SEE IF KEYCODE
|
|
EXTEND
|
|
RAND NAVKEYIN
|
|
EXTEND
|
|
BZF +3 # IF NO INBITS
|
|
TC POSTJUMP
|
|
CADR KEYCOM # IT,S A KEY CODE, NOT A MARK.
|
|
|
|
+3 TC ALARM # ALARM IF NO INBITS
|
|
OCT 113
|
|
TC RESUME
|
|
|
|
# Page 227
|
|
# PROGRAM NAME - MARKCONT DATE- 19 SEPT 1967
|
|
|
|
# PROGRAM MODIFIED BY 258/278 PROGRAMMERS LOG SECTION SXTMARK
|
|
# MOD BY- R. MELANSON TO ADD DOCUMENTATION ASSEMBLY SUNDISK REV. 116
|
|
|
|
# FUNCTIONAL DESCRIPTION-
|
|
# MARKCONT IS USED TO PERFORM A SPECIAL MARK FUNCTION FOR R21, TO EXECUTE A SPECIAL DISPLAY OF OPTICS AND TIME OR
|
|
# TO PERFORM A MARK OF THE STAR OR LAND SIGHTING BASED UPON FLASHING V-N.
|
|
|
|
# CALLING SEQUENCE-
|
|
# FROM MARKDIF
|
|
|
|
# NORMAL EXIT MODE-
|
|
# TASKOVER
|
|
|
|
# ALARM OR ABORT EXIT MODE-
|
|
# ALARM AND TASKOVER
|
|
|
|
# OUTPUT-
|
|
# 1) FOR R21-
|
|
# EBANK=EBANK7
|
|
# MRKBUF1 TO MRKBUF1+6 = TIME2,TIME1,CDUY,OPTICX,CDUZ,OPTICSY,CDUX OF CURRENT R21 MARK FUNCTION.
|
|
# MRKBUF2 TO MRKBUF2+6 CONTAINS PREVIOUS R21 MARK VALUES.
|
|
# 2) FOR SPECIAL DISPLAY JOB-
|
|
# RUPTREG1 AND MRKBUF1 = CDUS,RUPTREG2 AND MRKBUF1 +1 = CDUT.
|
|
# RUPTREG3 AND MRKBUF1 +2 = TIME2,RUPTREG4 AND MRKBUF1 +3 = TIME1
|
|
# 3) FOR NORMAL MARKING-
|
|
# DECREMENT BITS14-12 OF MARKSTAT BY 1,
|
|
# BIT10 MARKSTAT SET TO 1,INCREMENT QPRET BY 7,
|
|
# STORE TIME2,TIME1,CDUY,CDUS,CDUZ,CDUT AND CDUX IN VAC+1 TO VAC+7
|
|
|
|
# ERASABLE INITIALIZATION-
|
|
# 1) FOR R21-
|
|
# BIT14 OF STATE+2 =1, MRKBUF1 TO MRKBUF1+6, ITEMP1, RUPTREG3,
|
|
# RUPTSTOR TO RUPTSTOR+6 EXCEPT RUPTSTOR+4
|
|
# 2) FOR SPECIAL DISPLAY JOB-
|
|
# BIT14 OF STATE+2 =0,MARKSTAT =+0,RUPTREG1,RUPTREG2,RUPTREG3
|
|
# RUPTREG4,RUPTSTOR,RUPTSTOR+1,RUPTSTOR+3,RUPTSTOR+5,
|
|
# BIT12 OF STATE+5 (V59 FLAG),MRKBUF1 THRU MRKBUF1+3
|
|
# 3) FOR NORMAL MARKING-
|
|
# BIT14 OF STATE+2 =0,MARKSTAE =VAC ADDRESS, A REG, ITEMP1, RUPTREG3,
|
|
# RUPTSTOR TO RUPTSTOR+6 EXCEPT RUPTSTOR+4.
|
|
|
|
# DEBRIS-
|
|
# 1) FOR R21-
|
|
# A,ITEMP1,MRKBUF1,MRKBUF2
|
|
# 2) FOR SPECIAL DISPLAY JOB-
|
|
# A,RUPTREG1,RUPTREG2,RUPTREG3,RUPTREG4,MPAC TO MPAC+3
|
|
# 3) FOR NORMAL MARKING-
|
|
# A,MARKSTAT,ITEMP1,QPRET,VAC+1 TO VAC+7 OF VAC AREA IN USE
|
|
|
|
# Page 228
|
|
MARKCONT CAF BIT14
|
|
MASK STATE +2 # R21 MARK (SPECIAL MARKING FOR R21)
|
|
EXTEND
|
|
BZF MARKET # NOT SET THEREFORE REGULAR MARKING
|
|
MARKIT1 CAF SIX # SPECIAL FOR R21
|
|
TC GENTRAN # TRANSFER MRKBUF1 TO MRKBUF2
|
|
ADRES MRKBUF1
|
|
ADRES MRKBUF2
|
|
|
|
CAF SIX # TRANSFER CURRENT MARK DATA TO MARKBUF1
|
|
TC GENTRAN
|
|
ADRES MKT2T1
|
|
ADRES MRKBUF1
|
|
|
|
TCF TASKOVER
|
|
|
|
MARKET CCS MARKSTAT # SEE IF MARKS CALLED FOR
|
|
TC MARK2 # COLLECT MARKS
|
|
|
|
CAF TWO # IS MARKING SYSTEM IN USE (BIT2)
|
|
MASK EXTVBACT
|
|
EXTEND
|
|
BZF MARKET3 # MARKING NOT CALLED FOR
|
|
CAF BIT12
|
|
MASK STATE +5 # V59FLAG
|
|
EXTEND
|
|
BZF MARKET3 # IF V59FLAG NOT SET-MARK UNCALLED FOR
|
|
CAF PRIO5 # CALIBRATION MARK (SET) FOR P23
|
|
TC NOVAC # SPECIAL DISPLAY JOB
|
|
EBANK= MRKBUF1
|
|
2CADR MARKDISP
|
|
|
|
CAF SIX
|
|
TC GENTRAN # TRANSFER MARK DATE TO MARKDOWN
|
|
ADRES MKT2T1
|
|
ADRES MARKDOWN
|
|
CAF SIX
|
|
TC GENTRAN # TRANSFER MARK DATA TO MRKBUF1 FOR
|
|
ADRES MKT2T1 # SPECIAL DISPLAY OF SHAFT AND TRUNNION
|
|
ADRES MRKBUF1 # IF V59 ACTING
|
|
TCF TASKOVER
|
|
MARKET3 TC ALARM
|
|
OCT 122 # MARKING NOT CALLED FOR
|
|
TCF TASKOVER
|
|
114ALM TC ALARM # MARK NOT WANTED
|
|
OCT 114
|
|
TCF TASKOVER
|
|
|
|
# Page 229
|
|
# STORE MARK DATA IN MKVAC AND INCREMENT POINTER
|
|
|
|
MARK2 AD 74K # SEE IF MARKS WANTED-REDUCE MARKS WANTED
|
|
EXTEND
|
|
BZMF 114ALM # MARK NOT WANTED-ALARM
|
|
TS MARKSTAT
|
|
COM
|
|
MASK BIT10 # SET BIT10 TO ENABLE REJECT
|
|
ADS MARKSTAT
|
|
|
|
MASK LOW9
|
|
TS ITEMP1
|
|
INDEX A
|
|
XCH QPRET # PICK UP MARK SLOT-POINTER
|
|
TS ITEMP2 # SAVE CURRENT POINTER
|
|
AD SEVEN # INCREMENT POINTER
|
|
INDEX ITEMP1
|
|
TS QPRET # STORE ADVANCED POINTER
|
|
|
|
VACSTOR EXTEND
|
|
DCA MKT2T1
|
|
INDEX ITEMP2
|
|
DXCH 0
|
|
CA MKCDUY
|
|
INDEX ITEMP2
|
|
TS 2
|
|
CA MKCDUS
|
|
INDEX ITEMP2
|
|
TS 3
|
|
CA MKCDUZ
|
|
INDEX ITEMP2
|
|
TS 4
|
|
CA MKCDUT
|
|
INDEX ITEMP2
|
|
TS 5
|
|
CA MKCDUX
|
|
INDEX ITEMP2
|
|
TS 6
|
|
|
|
CAF PRIO34 # IF ALL MARKS MADE FLASH VB50
|
|
MASK MARKSTAT
|
|
EXTEND
|
|
BZF +2
|
|
TCF TASKOVER
|
|
CAF PRIO32
|
|
TC NOVAC
|
|
EBANK= MARKSTAT
|
|
2CADR MKVB50
|
|
|
|
TCF TASKOVER
|
|
|
|
# Page 230
|
|
# PROGRAM NAME - MKREJECT DATE- 5 APRIL 1967
|
|
# PROGRAM MODIFIED BY 258/276 PROGRAMMERS LOG SECTION SXTMARK
|
|
# MOD BY- R. MELANSON TO ADD DOCUMENTATION ASSEMBLY SUNDISK REV. 116
|
|
|
|
# FUNCTIONAL DESCRIPTION-
|
|
# ROUTINE ALLOWS OPEATOR TO REJECT MARK MADE PRIOR TO ACCEPTANCE AND ALLOWS A NEW MARK TO BE MADE BY ASTRONAUT
|
|
|
|
# CALLING SEQUENCE-
|
|
# FROM MARKRUPT IF BIT7 OF CHANNEL 16 IS 1.
|
|
|
|
# NORMAL EXIT MODE-
|
|
# RESUME
|
|
|
|
# ALARM OR ABORT EXIT MODE-
|
|
# ALARM AND RESUME
|
|
|
|
# OUTPUT-
|
|
# 1) FOR R21-
|
|
# MRKRUP1 SET TO -1
|
|
# 2) FOR NORMAL MARKING-
|
|
# BIT10 MARKSTAT =0,INCREMENT NO. MARKS BY 1,DECREMENT QPRET BY 7
|
|
|
|
# ERASABLE INITIALIZATION-
|
|
# 1) FOR R21-
|
|
# BIT14 OF STATE+2 SET TO 1
|
|
# 2) FOR NORMAL MARKING-
|
|
# BIT14 OF STATE+2 SET TO 0, MARKSTAT,QPRET
|
|
|
|
# DEBRIS-
|
|
# 1) FOR R21-
|
|
# A,MARKSTAT,EBANK
|
|
# 2) FOR NORMAL MARKING-
|
|
# A,MARKSTAT,ITEMP1,QPRET
|
|
|
|
MKREJECT CAF BIT14
|
|
MASK STATE +2 # R21 MARK (SPECIAL MARKING FOR R21)
|
|
EXTEND
|
|
BZF MRKREJCT # NOT SET THEREFORE REGULAR REJECT
|
|
CA NEGONE # -1 (FOR R22)
|
|
TS MRKBUF1 # -0 IN TIME IS FLAG TO R22 SIGNIFYING A
|
|
TC RESUME # REJECTED MARK
|
|
MRKREJCT CCS MARKSTAT # SEE IF MARKS BEING ACCEPTED
|
|
TC REJECT2
|
|
TC ALARM # MARKS NOT BEING ACCEPTED
|
|
OCT 112
|
|
TC RESUME
|
|
|
|
REJECT2 CS BIT10 # SEE IF MARK HAD BEEN MADE SINCE LAST
|
|
MASK MARKSTAT # REJECT, AND SET BIT10 TO ZERO TO
|
|
XCH MARKSTAT # SHOW MARK REJECT
|
|
# Page 231
|
|
MASK BIT10
|
|
CCS A
|
|
TC REJECT3
|
|
|
|
TC ALARM # DONT ACCEPT TWO REJECTS TOGETHER
|
|
OCT 110
|
|
TC RESUME
|
|
|
|
REJECT3 CAF LOW9 # DECREMENT POINTER TO REJECT MARK
|
|
MASK MARKSTAT
|
|
TS ITEMP1
|
|
CS SEVEN
|
|
INDEX ITEMP1
|
|
ADS QPRET # NEW POINTER
|
|
|
|
CAF BIT12 # INCREMENT MARKS WANTED AND IF FIELD
|
|
AD MARKSTAT # IS NOW NON-ZERO, CHANGE TO VB51 TO
|
|
XCH MARKSTAT # INDICATE MORE MARKS WANTED
|
|
MASK PRIO34 # INDICATE MORE MARKS WANTED
|
|
CCS A
|
|
TC RESUME
|
|
CAF PRIO32
|
|
TC NOVAC
|
|
EBANK= MARKSTAT
|
|
2CADR MKVB51
|
|
|
|
TC RESUME
|
|
|
|
# Page 232
|
|
# PROGRAM DESCRIPTION MKVB51 AND MKVB50
|
|
|
|
# AUTHOR-BARNERT DATE-2-15-67 MOD-0
|
|
# PURPOSE FLASH V51N70,V51N43, OR V51 TO REQUEST MARKING,
|
|
# AND V50N25 R1=16 TO REQUEST TERMINATE MARKING.
|
|
|
|
# CALLING SEQUENCE AS JOB WITHIN SXTMARK
|
|
|
|
# EXIT TO ENDMARK UPON RECEIPT OF V33, V34 CAUSES GOTOP00H, ENTER
|
|
# RECYCLES THE DISPLAY
|
|
|
|
# NOTE- SXTMARK AUTOMATICALLY CHANGES FROM CALLING MKVB51 TO MKVB50 WHEN
|
|
# SUFFICIENT MARKS HAVE BEEN MADE, AND THE REVERSE WHEN A MARK
|
|
# REJECT REDUCES THE NUMBER MADE BELOW THAT REQUIRED
|
|
|
|
# SUBROUTINES CALLED- BANKCALL, GOMARK2,GOODEND,ENDMARK,WAITLIST
|
|
|
|
# ALARM OR ABORT MODES - NONE
|
|
|
|
# ERASABLE USED-VERBREG,MARKSTAT,QPRET,DSPTEM1
|
|
|
|
# OUTPUT MARKSTAT=VAC ADDRESS
|
|
|
|
# QPRET= NO.MARKS
|
|
MKVB51 TC BANKCALL # CLEAR DISPLAY FOR MARK VERB
|
|
CADR KLEENEX
|
|
CAF VB51 # DISPLAY MARK VB51
|
|
TC BANKCALL
|
|
CADR GOMARK4
|
|
TCF TERMSXT # VB34-TERMINATE
|
|
TCF ENTANSWR # V33-PROCEED-MARKING DONE
|
|
TCF MKVB5X # ENTER-RECYCLE TO INITIAL MARK DISPLAY
|
|
|
|
TERMSXT TC CLEARMRK # CLEAR MARK ACTIVITY.
|
|
|
|
TC CHECKMM
|
|
MM 03
|
|
TCF +2
|
|
TC TERMP03
|
|
TC POSTJUMP
|
|
CADR TERM52
|
|
|
|
TERMP03 TC UPFLAG
|
|
ADRES TRM03FLG
|
|
ENTANSWR CAF LOW9 # PUT VAC ADR IN MARKSTAT AND NO. OF
|
|
MASK MARKSTAT # MARKS MADE IN QPRET BEFORE LEAVING
|
|
TS MARKSTAT # SXTMARK
|
|
COM
|
|
INDEX MARKSTAT
|
|
AD QPRET
|
|
# Page 233
|
|
EXTEND
|
|
BZMF JAMIT # NO MARKS MADE, SHOW IT IN QPRET, R53
|
|
EXTEND # WILL PICK IT UP AND RECYCLE
|
|
MP BIT12 # THIS PUTS NUMBER MARKS-1 IN A
|
|
AD ONE
|
|
JAMIT INDEX MARKSTAT # STORE NO OF MARKS MADE
|
|
TS QPRET
|
|
INHINT # SERVICE OPTSTALL INTERFACE WITH
|
|
CAF FIVE
|
|
TC WAITLIST
|
|
EBANK= MARKSTAT
|
|
2CADR ENDMARKS
|
|
|
|
TC ENDMARK # KNOCKS DOWN MARKING FLAG + DOES ENDOFJOB
|
|
|
|
ENDMARKS CAF ONE
|
|
TC IBNKCALL
|
|
CADR GOODEND
|
|
MKVB5X CAF PRIO34
|
|
MASK MARKSTAT # RE-DISPLAY VB51 IF MORE MARKS WANTED
|
|
CCS A # AND VB50 IF ALL IN
|
|
TCF MKVB51
|
|
MKVB50 CAF R1D1 # OCT 16
|
|
TS DSPTEM1
|
|
CAF V50N25
|
|
TCF MKVB51 +3
|
|
|
|
V50N25 VN 5025
|
|
VB51 VN 5100
|
|
OCT37 = LOW5
|
|
|
|
# PROGRAM NAME - MARKIT DATE- 19 SEPT 1967
|
|
|
|
# CALLING SEQUENCE
|
|
# FROM MARKRUPT IF CHAN 16 BIT 6 = 1
|
|
|
|
# EXIT
|
|
# RESUME
|
|
|
|
# INPUT
|
|
# CDUCHKWD. ALSO ALL INITIALIZATION FOR MARKCONT
|
|
|
|
# OUTPUT
|
|
# MKT2T1,MKCDUX,MKCDUY,MKCDUZ,MKCDUS,MKCDUT
|
|
|
|
# ALARM EXIT
|
|
# NONE
|
|
|
|
MARKIT CCS CDUCHKWD
|
|
TCF +3 # DELAY OF CDUCHKWD CS IF PNZ
|
|
# Page 234
|
|
TCF +2
|
|
CAF ZERO
|
|
AD ONE # 10 MS IF NO CHECK
|
|
TC WAITLIST
|
|
EBANK= MRKBUF1
|
|
2CADR MARKDIF
|
|
|
|
TCF RESUME
|
|
|
|
SETLOC SXTMARK1
|
|
BANK
|
|
|
|
COUNT 20/SXTMK
|
|
|
|
# PROGRAM NAME - MARKDIF DATE- 19 SEPT 1967
|
|
|
|
# CALLING SEQUENCE
|
|
# WAITLIST FROM MARKIT
|
|
|
|
# EXIT
|
|
# TASKOVER TO IBNKCALL TO MARKCONT
|
|
|
|
# INPUT
|
|
# OUTPUT FROM MARKIT, INPUT TO MARKCONT, CDUCHKWD
|
|
|
|
# OUTPUT
|
|
# RUPTSTOR - RUPTSTOR+3,RUPTREG3,RUPTSTOR+5 - RUPTSTOR+6
|
|
|
|
# ALARM EXIT
|
|
# ALARM AND TASKOVER
|
|
|
|
MARKDIF CA CDUCHKWD # IF DELAY CHECK IS ZERO OR NEG,ACP MARK
|
|
EXTEND
|
|
BZMF MKACPT
|
|
CS BIT1
|
|
TS MKNDX # SET INDEX -1
|
|
CA MKCDUX
|
|
TC DIFCHK # SEE IF VEHICLE RATE TO MUCH AT MARK
|
|
CA MKCDUY
|
|
TC DIFCHK
|
|
CA MKCDUZ
|
|
TC DIFCHK
|
|
|
|
MKACPT TC IBNKCALL
|
|
CADR MARKCONT # MARK DATA OK, WHAT DO WE DO WITH IT
|
|
|
|
DIFCHK INCR MKNDX # INCREMENT INDEX
|
|
|
|
EXTEND
|
|
INDEX MKNDX
|
|
# Page 235
|
|
MSU CDUX # GET MARK(ICDU) - CURRENT(ICDU)
|
|
CCS A
|
|
TCF +4
|
|
TC Q
|
|
TCF +2
|
|
TC Q
|
|
AD NEG2 # SEE IF DIFFERENCE GREATER THAN 3 BITS
|
|
EXTEND
|
|
BZMF -3 # NOT GREATER
|
|
|
|
TC ALARM # COUPLED WITH PROGRAM ALARM
|
|
OCT 00121
|
|
|
|
TCF TASKOVER # DO NOT ACCEPT
|