482 lines
13 KiB
ArmAsm
482 lines
13 KiB
ArmAsm
# Copyright: Public domain.
|
|
# Filename: DAPIDLER_PROGRAM.agc
|
|
# Purpose: Part of the source code for Luminary 1A build 099.
|
|
# It is part of the source code for the Lunar Module's (LM)
|
|
# Apollo Guidance Computer (AGC), for Apollo 11.
|
|
# Assembler: yaYUL
|
|
# Contact: Ron Burkey <info@sandroid.org>.
|
|
# Website: www.ibiblio.org/apollo.
|
|
# Pages: 1410-1420
|
|
# Mod history: 2009-05-10 SN (Sergio Navarro). Started adapting
|
|
# from the Luminary131/ file of the same
|
|
# name, using Luminary099 page images.
|
|
#
|
|
# This source code has been transcribed or otherwise adapted from
|
|
# digitized images of a hardcopy from the MIT Museum. The digitization
|
|
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
|
|
# the Museum. Many thanks to both. The images (with suitable reduction
|
|
# in storage size and consequent reduction in image quality as well) are
|
|
# available online at www.ibiblio.org/apollo. If for some reason you
|
|
# find that the images are illegible, contact me at info@sandroid.org
|
|
# about getting access to the (much) higher-quality images which Paul
|
|
# actually created.
|
|
#
|
|
# Notations on the hardcopy document read, in part:
|
|
#
|
|
# Assemble revision 001 of AGC program LMY99 by NASA 2021112-61
|
|
# 16:27 JULY 14, 1969
|
|
|
|
# Page 1410
|
|
# THE DAPIDLER PROGRAM IS STARTED BY FRESH START AND RESTART. THE DAPIDLER PROGRAM IS DONE 10 TIMES
|
|
# PER SECOND UNTIL THE ASTRONAUT DESIRES THE DAP TO WAKE UP, AND THE IMU AND CDUS ARE READY FOR USE BY THE DAP.
|
|
# THE NECESSARY INITIALIZATION OF THE DAP IS DONE BY THE DAPIDLER PROGRAM.
|
|
|
|
BANK 16
|
|
SETLOC DAPS1
|
|
BANK
|
|
|
|
EBANK= AOSQ
|
|
|
|
COUNT* $$/DAPID
|
|
|
|
CHEKBITS EXTEND
|
|
READ CHAN31 # IF BOTH BIT13 AND BIT14 ARE ONE, THEN
|
|
COM # THE MODE SELECT SWITCH IS IN THE OFF
|
|
MASK BIT13-14 # POSITION, AND SO THE DAP SHOULD BE OFF,
|
|
EXTEND # WITH NO ATTITUDE ERROR DISPLAY.
|
|
BZF MOREIDLE
|
|
|
|
CS IMODES33
|
|
MASK BIT6
|
|
CCS A
|
|
TCF JUMPDSP
|
|
CS RCSFLAGS # IMU NOT USABLE. SET UP INITIALIZATION
|
|
MASK BIT3 # FLAG FOR ATT ERROR DISPLAY ROUTINE.
|
|
ADS RCSFLAGS
|
|
TCF SHUTDOWN
|
|
|
|
CHEKMORE CAF BIT10 # BIT 10 OF 30 IS PGNCS CONTROL OF S/C
|
|
EXTEND
|
|
RAND CHAN30 # BITS IN 30 ARE INVERTED
|
|
CCS A
|
|
TCF MOREIDLE
|
|
|
|
RETURN
|
|
|
|
# Page 1411
|
|
# DAPIDLER ENTRY.
|
|
|
|
DAPIDLER LXCH BANKRUPT # INTERRUPT LEAD INS (CONTINUED)
|
|
EXTEND
|
|
QXCH QRUPT
|
|
|
|
CA RCSFLAGS
|
|
MASK BIT13
|
|
CCS A # CHECK IF 1/ACCJOB HAS BEEN SET UP SINCE
|
|
TCF CHECKUP # THE LAST FRESH START OR RESTART.
|
|
CA BIT13
|
|
ADS RCSFLAGS # BIT 13 IS 1.
|
|
CAF PRIO27
|
|
TC NOVAC # SET UP JOB TO DO A LITTLE INITIALIZATION
|
|
EBANK= AOSQ # AND EXECUTE 1/ACCS.
|
|
2CADR 1/ACCSET # (WILL BRANCH TO MOREIDLE ON ACCSOKAY)
|
|
|
|
CHECKUP TC CHEKBITS # CHECK TO SEE IF LM DAP IS TO GO ON AND
|
|
# DO ERROR DISPLAY.
|
|
|
|
CAE DAPBOOLS # IF 1/ACCS HAS NOT BEEN COMPLETED, IDLE.
|
|
MASK ACCSOKAY # NOTE: ONLY FRESH START AND RESTART
|
|
EXTEND # KNOCK THIS BIT DOWN.
|
|
BZF MOREIDLE
|
|
|
|
STARTDAP TC IBNKCALL # ZERO ATTITUDE ERROR AND DESIRED RATES.
|
|
FCADR ZATTEROR
|
|
CAF ZERO # ************ INITIALIZE: *************
|
|
TS TJP
|
|
TS TJU
|
|
TS TJV
|
|
TS OMEGAP # RATES IN BODY (PILOT) COORDINATES.
|
|
TS OMEGAQ
|
|
TS OMEGAR
|
|
TS TRAPEDP
|
|
TS TRAPEDQ
|
|
TS TRAPEDR
|
|
TS AOSQ # OFFSET ACCELERATION ESTIMATES.
|
|
TS AOSQ +1
|
|
TS AOSR
|
|
TS AOSR +1
|
|
TS ALPHAQ # COPIES OF OFFSET ESTIMATES FOR DOWNLIST.
|
|
TS ALPHAR
|
|
TS NEGUQ
|
|
TS NEGUR
|
|
TS AOSQTERM # QRAXIS RATE DERIVATION TERMS AND KALMAN
|
|
TS AOSRTERM # FILTER INITIALIZATION TERMS.
|
|
TS QACCDOT # DESCENT ACCELERATION DERIVATIVE EST.
|
|
TS RACCDOT
|
|
# Page 1412
|
|
TS ALLOWGTS # AOSTASK FLAG FOR QRAXIS RCS CONTROL USE.
|
|
TS COTROLER # DO TRYGTS ON FIRST PASS (WILL GO TO RCS)
|
|
TS INGTS # RECOGNIZE FIRST GTS PASS AS SUCH.
|
|
TS QGIMTIMR # STOP GIMBAL DRIVES. (PROBABLY WOULD BE
|
|
TS RGIMTIMR # GOOD ENOUGH JUST TO INACTIVATE TIMERS)
|
|
TS OLDPMIN # MINIMUM IMPULSE MODE ERASABLES
|
|
TS OLDQRMIN
|
|
TS PJETCTR # INITIALIZE DOCKED JET INHIBITION
|
|
TS UJETCTR # COUNTERS
|
|
TS VJETCTR
|
|
CALLGMBL EQUALS BIT5 # RCSFLAGS INITIALIZATION.
|
|
CS MANFLAG
|
|
MASK RCSFLAGS # NEGUQ(R) HAVE BEEN GENERATED.
|
|
TS RCSFLAGS
|
|
|
|
# SET UP "OLD" MEASURED CDU ANGLES:
|
|
|
|
EXTEND
|
|
DCA CDUX # OLDXFORP AND OLDYFORP
|
|
DXCH OLDXFORP
|
|
CA CDUZ
|
|
TS OLDZFORQ
|
|
CS RCSFLAGS
|
|
MASK BIT12
|
|
ADS RCSFLAGS # BIT 12 SET TO 1.
|
|
CA FOUR
|
|
TS SKIPU
|
|
TS SKIPV
|
|
CA POSMAX
|
|
TS TIME6
|
|
TS T6NEXT
|
|
TS T6FURTHA
|
|
CA ZERO
|
|
TS T6NEXT +1
|
|
TS T6FURTHA +1
|
|
TS NXT6ADR
|
|
TS NEXTP
|
|
TS NEXTU
|
|
TS NEXTV
|
|
CS TEN
|
|
TS DAPZRUPT # TASK NOT IN PROGRESS, INITIALIZE NEG.
|
|
CA TWO
|
|
TS NPTRAPS
|
|
TS NQTRAPS
|
|
TS NRTRAPS
|
|
EXTEND
|
|
DCA PAXADIDL
|
|
DXCH T5ADR
|
|
SETTIME5 CAF MS100
|
|
TS TIME5
|
|
# Page 1413
|
|
TCF RESUME
|
|
EBANK= AOSQ
|
|
IDLERADR 2CADR DAPIDLER
|
|
|
|
MOREIDLE TC IBNKCALL # CALCULATE Q,R-AXES ATTITUDE ERRORS.
|
|
CADR QERRCALC
|
|
|
|
TC IBNKCALL
|
|
CADR CALCPERR # CALCULATE P AXIS ATTITUDE ERRORS.
|
|
|
|
SHUTDOWN EXTEND
|
|
DCA IDLERADR
|
|
DXCH T5ADR
|
|
|
|
CAF ZERO # KILL ANY POSSIBLE JET REQUESTS
|
|
TS NEXTP
|
|
TS NEXTU
|
|
TS NEXTV
|
|
EXTEND # COMMAND JETS OFF.
|
|
WRITE CHAN5
|
|
EXTEND
|
|
WRITE CHAN6
|
|
CS BGIM23 # TURN TRIM GIMBAL OFF
|
|
EXTEND
|
|
WAND CHAN12
|
|
TCF SETTIME5 # RETURN IN 100 MSEC.
|
|
|
|
MANFLAG OCT 03021
|
|
BGIM23 OCTAL 07400
|
|
EBANK= OMEGAP
|
|
PAXADIDL 2CADR PAXIS
|
|
|
|
MS100 = OCT37766
|
|
COSMG = ITEMP1
|
|
JUMPDSP EXTEND # TRANSFER TO BANK 20
|
|
DCA DSPCADR # FOR ATTITUDE ERROR DISPLAYS
|
|
DTCB
|
|
|
|
EBANK= AK
|
|
DSPCADR 2CADR ALTDSPLY
|
|
|
|
# Page 1414
|
|
BANK 20
|
|
SETLOC DAPS3
|
|
BANK
|
|
COUNT* $$/NEEDL
|
|
|
|
# PROGRAM: ALTDSPLY
|
|
# MOD 0. 6 DEC 1967
|
|
# AUTHOR: CRAIG WORK, DON KEENE, MIT IL
|
|
# MOD 3 BY DON KEENE AUG 1, 1968 -- MOVED PROGRAM TO BANK 20
|
|
#
|
|
# PROGRAM DESCRIPTION:
|
|
# ALTDSPLY REVERSES THE DSPLYALT BIT OF RCSFLAGS EACH TIME IT IS CALLED, WHICH IS PRESUMABLY EVERY 100 MS.
|
|
# IF THE REVERSED BIT IS ONE, NEEDLER IS CALLED TO DISPLAY ATTITUDE ERRORS. IF THE BIT IS ZERO, THE ATTITUDE ERR-
|
|
# ORS ARE CALCULATED AS 1) DAP FOLLOWING ERRORS, IF NEEDLFLG = 0, AND 2) TOTAL ATTITUDE ERRORS FOR NEEDLFLG = 1.
|
|
#
|
|
#
|
|
# WARNING: ALTDSPLY MAY ONLY BE CALLED WITH INTERRUPT INHIBITED
|
|
#
|
|
# WARNING: EBANK MUST BE SET TO 6 WHEN USING THIS ROUTINE.
|
|
#
|
|
# INPUT: RCSFLAGS AND 1) IF NEEDLFLG = 0, INPUT PERROR, QERROR, RERROR.
|
|
# 2) IF NEEDLFLG = 1, INPUT CPHI,CTHETA,CPSI,CDUX,CDUY,CDUZ,M11,M21,M32,M22,M32. (GPMATRIX)
|
|
#
|
|
#
|
|
# OUTPUTS: RCSFLAGS WITH DSPLYALT REVERSED, AK, AK1, AK2, + NEEDLER OUTPUTS.
|
|
#
|
|
# ENTRY: TCF ALTDSPLY
|
|
#
|
|
# EXIT: TCF CHEKMORE
|
|
#
|
|
# ALARM OR ABORT EXITS: NONE
|
|
#
|
|
# SUBPROGRAMS CALLED: NEEDLER, OVERSUB2
|
|
#
|
|
# DEBRIS: A, L, AND NEEDLER DEBRIS.
|
|
|
|
ALTDSPLY CA RCSFLAGS # INVERT THE DISPLAY ALTERNATION BIT.
|
|
TS L
|
|
CA DSPLYALT
|
|
EXTEND
|
|
RXOR LCHAN
|
|
TS RCSFLAGS
|
|
|
|
MASK DSPLYALT
|
|
CCS A # IS ALTERNATION FLAG ZERO?
|
|
TCF NEEDLER
|
|
|
|
CAE FLAGWRD0 # NEEDLFLG WILL INDICATE TOTAL OR DAP AT-
|
|
# Page 1415
|
|
MASK NEEDLBIT # TITUDE ERROR DISPLAY REQUEST.
|
|
CCS A
|
|
TCF DSPLYTOT # TOTAL ERROR IS NEEDED IN AK, AK +1, AK +2
|
|
|
|
CS QERROR # YES. DISPLAY ATT ERRORS ON THE -BALL.
|
|
TS AK +1 # ERROR COMPLEMENTS ARE INPUT TO NEEDLER.
|
|
CS RERROR
|
|
TS AK +2
|
|
CS PERROR
|
|
XCH AK
|
|
|
|
TCF RETNMORE # DISPLAY THESE THE NEXT TIME THROUGH
|
|
|
|
# CALCULATE GIMBAL ANGLE TOTAL ERRORS, RESOLVE INTO PILOT AXES, STORE TOTAL ERRORS FOR NEEDLER. Q-AXIS FIRST.
|
|
|
|
DSPLYTOT EXTEND
|
|
QXCH ITEMP1 # SAVE Q FOR CHEKBITS RETURN.
|
|
|
|
CA CTHETA # DESIRED ATTITUDE, Y-AXIS, 2'S COMP.
|
|
EXTEND # SUBTRACT CURRENT ATTITUDE.
|
|
MSU CDUY # DIFFERENCE SCALED AT PI, 1'S COMP.
|
|
TS AK # SAVE FOR R-ERROR CALCULATION.
|
|
EXTEND
|
|
MP M21 # (CTHETA-CDUY)*M21 SCALED AT PI RADIANS.
|
|
XCH AK +1 # STORE FIRST TERM OF Q ERROR.
|
|
CA CPSI # DESIRED ATTITUDE, Z-AXIS, 2'S COMP.
|
|
EXTEND # SUBTRACT CURRENT ATTITUDE.
|
|
MSU CDUZ # DIFFERENCE SCALED AT PI, 1'S COMP.
|
|
TS AK +2 # SAVE Z-AXIS TERM FOR R ERROR CALCULATION
|
|
EXTEND
|
|
MP M22 # (CPSI-CDUZ)*M22, SCALED AT PI RADIANS.
|
|
AD AK +1 # Q ERROR COMPLETE , AT PI RAD.
|
|
TC OVERSUB2 # PIN NEEDLES IN CASE OF OVERFLOW
|
|
TS AK +1
|
|
|
|
# R ERROR CALCULATION NEXT.
|
|
|
|
CA AK # Y-AXIS DIFFERENCE STORED BY Q-AXIS CALC.
|
|
EXTEND
|
|
MP M31 # (CTHETA-CDUY)*M31, SCALED AT PI RADIANS.
|
|
XCH AK +2 # FIRST TERM OF R ERROR.
|
|
# Z-AXIS DIFFERENCE, STORED BY A CALC. IS
|
|
EXTEND # RECOVERED BY THE EXCHANGE.
|
|
MP M32 # (CPSI-CDUZ)*M32, SCALED AT PI RADIANS.
|
|
AD AK +2 # R ERROR COMPLETE , AT PI RAD.
|
|
TC OVERSUB2 # PIN NEEDLES IN CASE OF OVERFLOW.
|
|
TS AK +2
|
|
|
|
# NOW CALCULATE P ERROR. (NOTE THAT M13 = 1, SCALED AT 1, SO THE MULTIPLICATION IS BY-PASSED.)
|
|
# Page 1416
|
|
CA AK # Y-AXIS DIFFERENCE STORED BY Q AXIS CALC.
|
|
EXTEND
|
|
MP M11 # (CTHETA-CDUY)*M11 SCALED AT PI RADIANS.
|
|
XCH AK # FIRST TERM OF P ERROR IN AK, AT PI RAD.
|
|
CAE CPHI # DESIRED ATTITUDE, X-AXIS, 2'S COMP.
|
|
EXTEND # SUBTRACT CURRENT X ATTITUDE.
|
|
MSU CDUX # X-AXIS DIFFERENCE, 1'S COMP, AT PI RAD.
|
|
|
|
# M13 = 1, SO BYPASS THE MULTIPLICATION.
|
|
# EXTEND
|
|
# MP M13 # (CPHI-CDUX)*M13 SCALED AT PI RADIANS.
|
|
|
|
AD AK # P ERROR COMPLETE , SCALED AT PI RAD
|
|
TC OVERSUB2 # PIN NEEDLES IN CASE OF OVERFLOW.
|
|
TS AK
|
|
|
|
EXTEND
|
|
QXCH ITEMP1 # RESTORE Q FOR CHEKBITS RETURN.
|
|
|
|
TCF RETNMORE # DISPLAY THESE THE NEXT TIME THROUGH
|
|
|
|
# Page 1417
|
|
# FDAI ATTITUDE ERROR DISPLAY SUBROUTINE
|
|
#
|
|
# PROGRAM DESCRIPTION: D. KEENE 5/24/67
|
|
# MOD 1 BY CRAIG WORK, 12 DEC 67
|
|
# MOD 2 BY CRAIG WORK, 6 APRIL 68, CONVERTS ATTITUDE ERROR DISPLAY SCALING FROM 16 7/8 DEG. TO 42 3/16 DEGREES.
|
|
#
|
|
# THIS SUBROUTINE IS USED TO DISPLAY ATTITUDE ERRORS ON THE FDAI VIA THE DIGITAL TO ANALOG CONVERTERS (DACS)
|
|
# IN THE CDUS. CARE IS TAKEN TO METER OUT THE APPROPRIATE NUMBER OF PULSES TO THE IMU ERROR COUNTERS AND PREVENT
|
|
# OVERFLOW, TO CONTROL THE RELAY SEQUENCING, AND TO AVOID INTERFERENCE WITH THE COARSE ALIGN LOOP WHICH ALSO USES
|
|
# THE DACS.
|
|
#
|
|
# CALLING SEQUENCE:
|
|
# DURING THE INITIALIZATION SECTION OF THE USER'S PROGRAM, BIT3 OF RCSFLAGS SHOULD BE SET TO INITIATE THE
|
|
# TURN-ON SEQUENCE WITHIN THE NEEDLES PROGRAM:
|
|
# CS RCSFLAGS # IN EBANK6
|
|
# MASK BIT3
|
|
# ADS RCSFLAGS
|
|
# THEREAFTER, THE ATTITUDE ERRORS GENERATED BY THE USER SHOULD BE TRANSFERRED TO THE FOLLOWING LOCATIONS IN EBANK6:
|
|
# AK SCALED 180 DEGREES NOTE: THESE LOCATIONS ARE SUBJECT
|
|
# AK1 SCALED 180 DEGREES TO CHANGE
|
|
# AK2 SCALED 180 DEGREES
|
|
# FULL SCALED DEFLECTION OF THE NEEDLES CORRESPONDS TO 5 1/16 DEGREES, WHILE 384 BITS IN THE IMU ERROR COUNTER
|
|
# CORRESPONDS TO 42 3/16 DEGREES. (DAC MAXIMUM CAPACITY IS 384 BITS.) 46 BITS EFFECTIVELY PIN THE NEEDLES.
|
|
#
|
|
# A CALL TO NEEDLER WILL THE UPDATE THE DISPLAY:
|
|
# INHINT
|
|
# TC IBNKCALL # NOTE: EBANK SHOULD BE SET TO E6
|
|
# CADR NEEDLER
|
|
# RELINT
|
|
# THIS PROCESS SHOULD BE REPEATED EACH TIME THE ERRORS ARE UPDATED. AT LEAST 3 PASSES THRU THE PROGRAM ARE
|
|
# REQUIRED BEFORE ANYTHING IS ACTUALLY DISPLAYED ON THE ERROR METERS.
|
|
# NOTE: EACH CALL TO NEEDLER MUST BE SEPARATED BY AT LEAST 50 MS. TO ASSURE PROPER RELAY SEQUENCING.
|
|
#
|
|
# ERASABLES USED:
|
|
# AK CDUXCMD
|
|
# AK1 CDUYCMD
|
|
# AK2 CDUZCMD
|
|
# EDRIVEX A,L,Q
|
|
# EDRIVEY T5TEMP
|
|
# EDRIVEZ DINDX
|
|
# Page 1418
|
|
#
|
|
# SWITCHES: RCSFLAGS BITS 3,2
|
|
#
|
|
# I/O CHANNELS: CHAN12 BIT 4 (COARSE ALIGN -- READ ONLY)
|
|
# CHAN12 BIT 6 (IMU ERROR COUNTER ENABLE)
|
|
# CHAN14 BIT 13,14,15 (DAC ACTIVITY)
|
|
#
|
|
# SIGN CONVENTION: AK = THETAC - THETA
|
|
# WHERE THETAC = COMMAND ANGLE
|
|
# THETA = PRESENT ANGLE
|
|
|
|
NEEDLER CA RCSFLAGS
|
|
MASK SIX
|
|
EXTEND
|
|
BZF NEEDLES3
|
|
MASK BIT3
|
|
EXTEND
|
|
BZF NEEDLER2 # BIT3 = 0, BIT2 = 1
|
|
|
|
CS BIT6 # FIRST PASS BIT3 = 1
|
|
EXTEND # DISABLE IMU ERROR COUNTER TO ZERO DACS
|
|
WAND CHAN12 # MUST WAIT AT LEAST 60 MS BEFORE
|
|
NEEDLE11 CS ZERO # ENABLING COUNTERS.
|
|
TS AK # ZERO THE INPUTS ON FIRST PASS
|
|
TS AK1
|
|
TS AK2
|
|
TS EDRIVEX # ZERO THE DISPLAY REGISTERS
|
|
TS EDRIVEY
|
|
TS EDRIVEZ
|
|
TS CDUXCMD # ZERO THE OUT COUNTERS
|
|
TS CDUYCMD
|
|
TS CDUZCMD
|
|
CS SIX # RESET RCSFLAGS FOR PASS2
|
|
MASK RCSFLAGS
|
|
AD BIT2
|
|
TS RCSFLAGS
|
|
TCF RETNMORE
|
|
|
|
NEEDLER2 CAF BIT6 # ENABLE IMU ERROR COUNTERS
|
|
EXTEND
|
|
WOR CHAN12
|
|
CS SIX # RESET RCSFLAGS TO DISPLAY ATTITUDE
|
|
MASK RCSFLAGS # ERRORS. WAIT AT LEAST 4 MS FOR
|
|
TS RCSFLAGS # RELAY CLOSURE.
|
|
TCF RETNMORE
|
|
|
|
NEEDLES3 CAF BIT6 # CHECK TO SEE IF IMU ERROR COUNTER
|
|
EXTEND # IS ENABLED
|
|
RAND CHAN12
|
|
# Page 1419
|
|
CCS A # IF NOT, RE-INITIALIZE NEEDLER.
|
|
TCF NEEDLES
|
|
|
|
CS RCSFLAGS # SET UP INITIALIZATION FLAG IN RCSFLAGS.
|
|
MASK BIT3
|
|
ADS RCSFLAGS
|
|
TCF RETNMORE
|
|
|
|
NEEDLES CAF TWO
|
|
DACLOOP TS DINDX
|
|
CS ONETENTH # RESCALE INPUTS TO + OR - 1800 DEGREES.
|
|
EXTEND
|
|
INDEX DINDX
|
|
MP AK
|
|
TS L
|
|
CCS A
|
|
CA DACLIMIT
|
|
TCF +2
|
|
CS DACLIMIT
|
|
AD L
|
|
TS T5TEMP # OVFLO CHK
|
|
TCF +4
|
|
INDEX A # ON OVERFLOW LIMIT OUTPUT TO +-384
|
|
CAF DACLIMIT
|
|
TS L
|
|
INDEX DINDX
|
|
CS EDRIVEX # CURRENT VALUE OF DAC
|
|
AD L
|
|
INDEX DINDX
|
|
ADS CDUXCMD
|
|
INDEX DINDX
|
|
LXCH EDRIVEX
|
|
CCS DINDX
|
|
TCF DACLOOP
|
|
CAF 13,14,15
|
|
EXTEND
|
|
WOR CHAN14 # SET DAC ACTIVITY BITS
|
|
TCF RETNMORE
|
|
|
|
DEC -384
|
|
DACLIMIT DEC 16000
|
|
DEC 384
|
|
|
|
ONETENTH OCT 03146 # DECIMAL +0.1, SCALED AT 1.
|
|
DSPLYALT EQUALS BIT4 # 100 MS ALTERNATION BIT IN RCSFLAGS
|
|
|
|
OVERSUB2 TS 7 # RETURNS A UNCHANGED OR LIMITED TO
|
|
TC Q # POSMAX OR NEGMAX IF A HAS OVERFLOW
|
|
INDEX A
|
|
# Page 1420
|
|
CS LIMITS # DUPLICATE CODING IN BANK 16
|
|
TC Q
|
|
|
|
RETNMORE EXTEND # RETURN TO CHEKMORE
|
|
DCA MORECADR
|
|
DTCB
|
|
|
|
EBANK= AOSQ
|
|
MORECADR 2CADR CHEKMORE
|
|
|