Apollo-11/Luminary099/EXTENDED_VERBS.agc
2016-12-28 16:11:25 +00:00

1682 lines
36 KiB
Plaintext

# Copyright: Public domain.
# Filename: EXTENDED_VERBS.agc
# Purpose: Part of the source code for Luminary 1A build 099.
# It is part of the source code for the Lunar Module's (LM)
# Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler: yaYUL
# Contact: Ron Burkey <info@sandroid.org>.
# Website: www.ibiblio.org/apollo.
# Pages: 262-300
# Mod history: 2009-05-10 SN (Sergio Navarro). Started adapting
# from the Luminary131/ file of the same
# name, using Luminary099 page images.
# 2009-06-05 RSB Corrected 5 typos.
# 2009-06-06 RSB Eliminated an extraneous 3-instruction block
# and added a missing instruction.
# 2009-06-07 RSB Added a couple of "SBANK=" for compatibility
# with yaYUL. Corrected a typo.
# 2010-12-31 JL Fixed page number comments.
# 2011-01-06 JL Added missing comment characters.
# 2011-05-08 JL Flagged SBANK= workarounds for future removal.
# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum. The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum. Many thanks to both. The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo. If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
# Assemble revision 001 of AGC program LMY99 by NASA 2021112-61
# 16:27 JULY 14, 1969
# Page 262
BANK 7
SETLOC EXTVERBS
BANK
EBANK= OGC
COUNT* $$/EXTVB
# FAN-OUT
GOEXTVB INDEX MPAC # VERB-40 IS IN MPAC
TC LST2FAN # FAN AS BEFORE.
LST2FAN TC VBZERO # VB40 ZERO (USED WITH NOUN 20 OR 72 ONLY)
TC VBCOARK # VB41 COARSE ALIGN (USED WITH NOUN 20 OR
# 72 ONLY)
TC IMUFINEK # VB42 FINE ALIGN IMU
TC IMUATTCK # VB43 LOAD IMU ATTITUDE ERROR METERS.
TC RRDESEND # VB44 TERMINATE CONTINUOUS DESIGNATE
TC ALM/END # VB45 SPARE
TC ALM/END # VB46 SPARE
TC V47TXACT # VB47 AGS INITIALIZATION
TC DAPDISP # VB48 LOAD A/P DATA
TCF CREWMANU # VB49 START AUTOMATIC ATTITUDE MANEUVER
TC GOLOADLV # VB50 PLEASE PERFORM
TC ALM/END # VB51 SPARE
TC GOLOADLV # VB52 PLEASE MARK X -- RETICLE.
TC GOLOADLV # VB53 PLEASE MARK Y -- RETICLE.
TC GOLOADLV # VB54 PLEASE MARK X OR Y RETICLE
TC ALINTIME # VB55 ALIGN TIME
TC TRMTRACK # VB56 TERMINATE TRACKING -- P20 + P25
TC LRON # VB57 PERMIT LANDING RADAR UPDATES
TC LROFF # VB58 INHIBIT LANDING RADAR UPDATES
TC ALM/END # VB59 SPARE
TC LRPOS2K # VB60 COMMAND LR TO POSITION 2.
TC DAPATTER # VB61 DISPLAY DAP ATTITUDE ERROR
TC TOTATTER # VB62 DISPLAY TOTAL ATTITUDE ERROR
TC R04 # VB63 SAMPLE RADAR ONCE PER SECOND
TC VB64 # VB64 CALCULATE, DISPLAY S-BAND ANT ANGLES
TC SNUFFOUT # VB65 DISABLE U,V JETS DURING DPS BURNS.
TC ATTACHED # VB66 ATTACHED MOVE THIS TO OTHER STATE
TC V67 # VB67 W MATRIX MONITOR
TC ALM/END # VB68 SPARE
VERB69 TC VERB69 # VB69 FORCE A HARDWARE RESTART
TC V70UPDAT # VB70 UPDATE LIFTOFF TIME.
TC V71UPDAT # VB71 UNIVERSAL UPDATE -- BLOCK ADDRESS.
TC V72UPDAT # VB72 UNIVERSAL UPDATE -- SINGLE ADDRESS.
TC V73UPDAT # VB73 UPDATE AGC TIME (OCTAL).
TC DNEDUMP # VB74 INITIALIZE DOWN-TELEMETRY PROGRAM
# FOR ERASABLE DUMP.
TC OUTSNUFF # VB75 ENABLE U,V JETS DURING DPS BURNS.
# Page 263
TC MINIMP # VB76 MINIMUM IMPULSE MODE
TC NOMINIMP # VB77 RATE COMMAND MODE
TC R77 # VB78 START LR SPURIOUS RETURN TEST
TC R77END # VB79 TERMINATE LR SPURIOUS RETURN TEST
TC LEMVEC # VB80 UPDATE LEM STATE VECTOR
TC CSMVEC # VB81 UPDATE CSM STATE VECTOR
TC V82PERF # VB82 REQUEST ORBIT PARAM DISPLAY (R30)
TC V83PERF # VB83 REQUEST REND PARAM DISPLAY (R31)
TC ALM/END # VB84 SPARE
TC VERB85 # VB85 DISPLAY RR LOS AZ AND ELEV
TC ALM/END # VB86 SPARE
TC ALM/END # VB87 SPARE
TC ALM/END # VB88 SPARE
TC V89PERF # VB89 ALIGN XORZ LEM AXIS ALONG LOS (R63)
TC V90PERF # VB90 OUT OF PLANE RENDEZVOUS DISPLAY
TC GOSHOSUM # VB91 DISPLAY BANK SUM.
TC SYSTEST # VB92 OPERAT IMU PERFORMANCE TEST.
TC WMATRXNG # VB93 CLEAR RENDWFLG
TC ALM/END # VB94 SPARE
TC UPDATOFF # VB95 NO STATE VECTOR UPDATE ALLOWED
TC VERB96 # VB96 INTERRUPT INTEGRATION AND GO TO P00
TC GOLOADLV # VB97 PLEASE VERIFY ENGINE FAILURE
TC ALM/END # VB98 SPARE
TC GOLOADLV # VB99 PLEASE ENABLE ENGINE
# END OF EXTENDED VERB FAN
TESTXACT CCS EXTVBACT # ARE EXTENDED VERBS BUSY
TC ALM/END # YES, TURN ON OPERATOR LIGHT
CA FLAGWRD4 # ARE PRIORITY DISPLAYS USING DSKY
MASK OC24100
CCS A
TC ALM/END # YES
CAF OCT24 # SET 3, AND 5
SETXTACT TS EXTVBACT # NO. SET FLAG TO SHOW EXT VERB DISPLAY
# SYSTEM BUSY
CA Q
TS MPAC +1
CS TWO # BLANK EVERYTHING EXCEPT MM AND VERB
TC NVSUB
TC +1
TC MPAC +1
XACTALM TC FALTON # TURN ON OPERATOR ERROR LIGHT.
TC ENDEXT # RELEASE MARK AND EXT. VERB DISPLAY SYS.
TERMEXTV EQUALS ENDEXT
# Page 264
ENDEXTVB EQUALS ENDEXT
XACT0 CAF ZERO # RELEASE MARK AND EXT. VERB DISPLAY SYS.
TC SETXTACT
ALM/END TC FALTON # TURN ON OPERATOR ERROR LIGHT
GOPIN TC POSTJUMP
CADR PINBRNCH
CHKP00H CA MODREG # CHECK FOR P00 OR P00-.
EXTEND
BZF TCQ
TC ALM/END
OC24100 OCT 24100
# Page 265
# VBZERO VERB 40 DESCRIPTION
#
# 1. REQUIRE NOUN 20 (ICDU ANGLES) OR NOUN 72 (RCDU ANGLES).
# 2. FOR N20, CHECK IMUCADR IN AN EFFORT TO AVOID A 1210 RESTART.
# FOR N72, CHECK IF EITHER RADAR IS IN USE.
# 3. EXECUTE THE CDU ZERO.
# 4. STALL UNTIL THE ZERO IS DONE.
# 5. DON'T DIFFERENTIATE BETWEEN A BAD OR GOOD RETURN.
# 6. EXIT, RE-ESTABLISHING THE INTERRUPTED DISPLAY (IF ANY).
VBZERO TC OP/INERT
TC IMUZEROK # RETURN HERE IF NOUN = ICDU(20)
TC RRZEROK # RETURN HERE IF NOUN = RCDU(72)
IMUZEROK TC CKMODCAD
TC BANKCALL # KEYBOARD REQ FOR ISS CDUZERO
CADR IMUZERO
TC BANKCALL # STALL
CADR IMUSTALL
TC +1
TC GOPIN # IMUZERO
RRZEROK TC RDRUSECK
TC BANKCALL
CADR RRZERO
RWAITK TC BANKCALL
CADR RADSTALL
TCF +1
TC GOPIN # RRZERO
# LRPOS2K VERB 60 DESCRIPTION
# COMMAND LANDING RADAR TO POSITION 2
#
# 1. EXIT WITH OP ERROR IF SOMEONE IS USING EITHER RADAR.
# 2. ALARM WITH CODE 523 IF POS 2 IS NOT INDICATED WITHIN
# THE PRESCRIBED TIME.
# 3. RE-ESTABLISH THE DISPLAYS.
LRPOS2K TC RDRUSECK
TC BANKCALL # COMMAND LR TO POSITION 2
CADR LRPOS2
TC BANKCALL
CADR RADSTALL
TC LRP2ALM
TC GOPIN
LRP2ALM TC ALARM
OCT 523
TC GOPIN
# Page 266
# V61 VERB 61, DISPLAY DAP ATTITUDE ERRORS ON FDAI ATTITUDE ERROR NEEDLES.
DAPATTER TC DOWNFLAG
ADRES NEEDLFLG
TC GOPIN
# V62 VERB 62, DISPLAY TOTAL ATTITUDE ERRORS ON FDAI ATTITUDE ERROR NEEDLES.
TOTATTER TC UPFLAG
ADRES NEEDLFLG
TC GOPIN
# Page 267
# VBCOARK VERB 41 DESCRIPTION
# COARSE ALIGN IMU OR RADAR
#
# 1. REQUIRE NOUN 20 OR NOUN 72 OR TURN ON OPERATOR ERROR.
# 2. REQUIRE EXT VERB DISPLAY SYS AVAILABLE OR TURN ON OPERATOR ERROR LIGHT AND GO TO PINBRNCH.
# CASE 1, NOUN 20 (ICDU ANGLES)
# 3. SET EXT VERB DISPLAY ACTIVE FLAG.
# 4. DISPLAY FLASHING V25,N22 (LOAD NEW ICDU ANGLES).
# RESPONSES
# A. TERMINATE
# 1. RELEASE EXT VERB DISPLAY SYSTEM
# B. PROCEED
# 1. COARSE ALIGN TO THE EXISTING THETAD'S (ICORK2).
# C. ENTER
# 1. COARSE ALIGN TO THE LOADED THETAD'S (ICORK2).
# ICORK2
# 1. RE-DISPLAY VERB 41.
# 2. EXECUTE IMUCCARS (IMU COARSE ALIGN).
# 3. EXECUTE IMUSTALL (ALLOW TIME FOR DATA TRANSFER).
# 4. RELEASE EXT VERB DISPLAY SYSTEM.
# CASE 2, NOUN 72 (RCDU ANGLES)
# EXIT WITH OP ERROR IF SOMEONE IS USING EITHER RADAD.
# 5. DISPLAY FLASHING V24, N73 (LOAD NEW RR TRUNION ANGLE AND NEW SHAFT ANGLE).
# RESPONSES
# A. TERMINATE
# 1. RELEASE EXT VERB DISPLAY SYS.
# B. PROCEED OR ENTER
# 1. EXECUTE AURLOKON (ASK OPERATOR FOR LOCK-ON REQUIREMENTS).
# 2. RE-DISPLAY VERB 41.
# 3. SCHEDULE RRDESK2 WITH PRIORITY 20.
# 4. RELEASE EXT VERB DISPLAY SYS.
# AURLOKON
# 1. FLASH V04 N12 R1 = 00006 R2 = 00002
# RESPONSES
# A. TERMINATE
# B. PROCEED
# 1. RESET LOCK-ON SWITCH
# 2. SET CONTINUOUS DESIGNATE FLAG
# 3. DISABLE R25
# C. V22 E 1 E, R1 = 00001, PROCEED
# 1. SET LOCK-ON SWITCH
VBCOARK TC OP/INERT
TC IMUCOARK # RETURN HERE IF NOUN = ICDU (20)
TC RRDESNBK # RETURN HERE IF NOUN = RCDU (72)
# RETURNS TO L+1 IF IMU OR L+2 IF RR.
OP/INERT CS OCT24
AD NOUNREG
EXTEND
# Page 268
BZF TCQ # IF = 20.
AD RRIMUDIF # -52
EXTEND
BZF Q+1
TC ALM/END # ILLEGAL.
RRIMUDIF DEC -52 # THE IMU
IMUCOARK TC CKMODCAD
TC TESTXACT # COARSE ALIGN FROM KEYBOARD.
CAF VNLODCDU # CALL FOR THETAD LOAD
TC BANKCALL
CADR GOXDSPF
TC TERMEXTV
TCF +1
ICORK2 CAF IMUCOARV # RE-DISPLAY COARSE ALIGN VERB.
TC BANKCALL
CADR EXDSPRET
TC BANKCALL # CALL MODE SWITCHING PROG
CADR IMUCOARS
TC BANKCALL # STALL
CADR IMUSTALL
TC ENDEXTVB
TC ENDEXTVB
VNLODCDU VN 2522
IMUCOARV VN 4100
# Page 269
# DESIGNATE TO DESIRED GIMBAL ANGLES.
RRDESNBK TC RDRUSECK
TC TESTXACT
CA RNDVZBIT # IS P20 RUNNING?
MASK FLAGWRD0
CCS A
TCF XACTALM # OPERADOR ERROR IF IN P20
CS OCT41000 # TERMINATE PRESENT DESIGNATION
INHINT # RELINT DONE IN GOXDSPF
MASK RADMODES
TS RADMODES
CAF VNLDRCDU # ASK FOR GIMBAL ANGLES.
TC BANKCALL
CADR GOXDSPF
TC TERMEXTV
TCF -4 # V33
TC BANKCALL # ASK OP FOR LOCK ON REQUIREMENTS.
CADR AURLOKON
CAF OPTCOARV # RE-DISPLAY OUR OWN VERB
TC BANKCALL
CADR EXDSPRET
CAF PRIO20
TC FINDVAC
EBANK= LOSCOUNT
2CADR RRDESK2
TCF TERMEXTV # FREES DISPLAY
VNLDRCDU VN 2473
OPTCOARV EQUALS IMUCOARV # DIFFERENT NOUNS.
RRDESK2 TC BANKCALL
CADR RRDESNB
TC +1 # DUMMY NEEDED SINCE DESRETRN DOES INCR
CA PRIORITY
MASK LOW9
CCS A
INDEX A
TS A # RELEASE THIS JOB'S VAC AREA.
COM # INSURE ENDOFJOB DOES A NOVAC END (BZMF).
ADS PRIORITY
TC BANKCALL # WAIT FOR COMPLETION OF DESIGNATE
CADR RADSTALL
# Page 270
TC +2 # BADEND -- NO LOCKON OR OUT OF LIMITS
TC ENDOFJOB # GOODEND -- LOCKON ACHIEVED
TC ALARM
OCT 503 # TURN ON ALARM LIGHT -- 503 DESIGNATE FAIL
TC ENDOFJOB
RRDESEND CCS RADMODES # TERMINATE CONTINOUS DESIGNATE ONLY
TCF GOPIN
TCF GOPIN
TCF +1
CS OCT41000 # BEGDES GOES TO ENDRADAR
INHINT # RELINT DONE IN DOWNFLAG
MASK RADMODES
TS RADMODES
TC CLRADMOD
CAF 1SEC
TC BANKCALL
CADR DELAYJOB
TC DOWNFLAG # ENABLE R25 GIMBAL MONITOR
ADRES NORRMON
TCF GOPIN
OCT41000 OCT 41000 # CONTINOUS DESIGNATE -- DESIGNATE
# Page 271
BANK 23
SETLOC EXTVB1
BANK
COUNT* $$/EXTVB
AURLOKON TC MAKECADR
TS DESRET
CAF TWO
TS OPTIONX +1
CAF SIX # OPTION CODE FOR V04N12
TS OPTIONX
-5 CAF V04N1272
TC BANKCALL # R2 00001 LOCK-ON
CADR GOMARKFR
TCF ENDEXT # V34
TCF +5 # V33
TCF -5 # V32
CAF BIT3
TC BLANKET
TC ENDOFJOB
+5 CA OPTIONX +1
MASK BIT2
CCS A
TCF NOLOKON
TC UPFLAG
ADRES LOKONSW
TCF AURLKON1
NOLOKON TC DOWNFLAG # IF NO LOCK-ON, SET BIT15 OF RADMADES TO
ADRES LOKONSW # INDICATE THAT CONTINUOUS DESIGNATION IS
TC UPFLAG # WANTED (TO BE TERMINATED BY V44.)
ADRES CDESFLAG
TC UPFLAG # SET NO RR ANGLE MONITOR FLAG.
ADRES NORRMON # DISABLE R25 RR GIMBAL MONITOR IN T4RUPT
AURLKON1 RELINT
CA DESRET
TCF BANKJUMP
V04N1272 VN 412
-LOKONFG OCT -20
BANK 43
SETLOC EXTVERBS
BANK
COUNT* $$/EXTVB
LRON TC UPFLAG # PERMIT INCORPORATION OF LR DATA V57
# Page 272
ADRES LRINH
TCF GOPIN
LROFF TC DOWNFLAG # INHIBIT INCORPORATION OF LR DATA V58
ADRES LRINH
TCF GOPIN
EBANK= OGC
# Page 273
# IMUFINEK VERB 42 DESCRIPTION
# FINE ALIGN IMU
#
# 1. REQUIRE EXT VERB DISPLAY AVAILABLE AND SET BUSY FLAG OR TURN ON OPER ERROR AND GO TO PINBRNCH.
# 2. DISPLAY FLASHING V25,N93....LOAD DELTA GYRO ANGLES....
# RESPONSES
# A. TERMINATE
# 1. RELEASE EXT VERB DISPLAY SYSTEM.
# B. PROCEED OR ENTER
# 1. RE-DISPLAY VERB 42
# 2. EXECUTE IMUFINE (IMU FIVE ALIGN MODE SWITCHING).
# 3. EXECUTE IMUSTALL (ALLOW FOR DATA TRANSFER)
# A. FAILED
# 1. RELEASE EXT VERB DISPLAY SYSTEM.
# B. GOOD
# 1. EXECUTE IMUPULSE (TORQUE IRIGS).
# 2. EXECUTE IMUSTALL AND RELEASE EXT VERB DISPLAY SYSTEM.
IMUFINEK TC CKMODCAD
TC TESTXACT # FINE ALIGN WITH GYRO TORQUING.
CAF VNLODGYR # CALL FOR LOAD OF GYRO COMMANDS
TC BANKCALL
CADR GOXDSPF
TC TERMEXTV
TC +1 # PROCEED WITHOUT A LOAD
CAF IMUFINEV # RE-DISPLAY OUR OWN VERB
TC BANKCALL
CADR EXDSPRET
TC BANKCALL # CALL MODE SWITCH PROG
CADR IMUFINE
TC BANKCALL # HIBERNATION
CADR IMUSTALL
TC ENDEXTVB
FINEK2 CAF LGYROBIN # PINBALL LEFT COMMANDS IN OGC REGISTERS
TC BANKCALL
CADR IMUPULSE
TC BANKCALL # WAIT FOR PULSES TO GET OUT.
CADR IMUSTALL
TC ENDEXTVB
TC ENDEXTVB
LGYROBIN ECADR OGC
VNLODGYR VN 2593
IMUFINEV VN 4200
# GOLOADLV VERB 50 DESCRIPTION
# AND OTHER PLEASE
# Page 274
# DO SOMETHING VERBS
#
# PLEASE PERFORM, MARK, CALIBRATE, ETC.
#
# 1. PRESSING ENTER ON DSKY INDICATES REQUESTED ACTION HAS BEEN PERFORMED, AND THE PROGRAM DOES THE
# SAME RECALL AS A COMPLETED LOAD.
# 2. THE EXECUTION OF A VERB 33 (PROCEED WITHOUT DATA) INDICATES THE REQUESTED ACTION IS NOT DESIRED.
SBANK= PINSUPER # FOR LOADLV1 AND SHOWSUM CADR'S
GOLOADLV TC FLASHOFF
CAF PINSUPBT
EXTEND
WRITE SUPERBNK
TC POSTJUMP
CADR LOADLV1
# VERB 47 -- AGS INITIALIZATION -- R47.
#
# SEE LOG SECTION AGS INITIALIZATION FOR OTHER PERTINENT REMARKS.
V47TXACT TC TESTXACT # NO OTHER EXTVERB.
CAF PRIO4
TC FINDVAC
## [WORKAROUND] RSB 2009
SBANK= LOWSUPER
## [WORKAROUND]
EBANK= AGSBUFF
2CADR AGSINIT
TC ENDOFJOB
CKMODCAD CA MODECADR
EXTEND
BZF TCQ
TC ALM/END # SOMEBODY IS USING MODECADR SO EXIT
# Page 275
# ALINTIME VERB 55 DESCRIPTION
# REQUIRE P00 OR P00-.
#
# 1. SET EXT VERB DISPLAY BUSY FLAG.
# 2. DISPLAY FLASHING V25,N24 (LOAD DELTA TIME FOR AGC CLOCK.
# 3. REQUIRE EXECUTION OF VERB 23.
# 4. ADD DELTA TIME, RECEIVED FROM INPUT REGISTER, TO THE COMPUTER TIME.
# 5. RELEASE EXT VERB DISPLAY SYSTEM
ALINTIME TC TESTXACT
TC POSTJUMP # NO ROOM IN 43
CADR R33
BANK 42
SETLOC SBAND
BANK
COUNT* $$/R33
R33 CAF PRIO7
TC PRIOCHNG
CAF VNLODDT
TC BANKCALL
CADR GOXDSPF
TC ENDEXT # TERMINATE
TC ENDEXT # PROCEED
CS DEC23 # DATA IN OR RESEQUENCE (UNLIKELY)
AD MPAC # RECALL LEFT VERB IN MPAC
EXTEND
BZF UPDATIME # GO AHEAD WITH UPDATE ONLY IF RECALL
TC ENDEXT # WITH V23 (DATA IN).
UPDATIME INHINT # DELTA TIME IS IN DSPTEM1, +1.
CAF ZERO
TS MPAC +2 # NEEDED FOR TP AGREE
TS L # ZERO T1 + 2 WHILE ALIGNING.
DXCH TIME2
DXCH MPAC
DXCH DSPTEM2 +1 # INCREMENT
DAS MPAC
TC TPAGREE # FORCE SIGN AGREEMENT.
DXCH MPAC # NEW CLOCK.
DAS TIME2
RELINT
UPDTMEND TC ENDEXT
DEC23 DEC 23 # V 23
VNLODDT VN 2524 # V25N24 FOR LOAD DELTA TIME
# Page 276
# SET UP FOR RADAR SAMPLING.
BANK 42
SETLOC EXTVERBS
BANK
EBANK= RSTACK
COUNT* $$/R0477
R77 TC RDRUSECK # TRY TO AVOID THE 1210.
CA FLAGWRD3 # IS R04 RUNNING?
MASK R04FLBIT
CCS A
TC ALM/END # YES.
TC UPFLAG
ADRES R77FLAG
TCF R04Z
R04 TC RDRUSECK # TRY TO AVOID THE 1210.
TC TESTXACT
TC UPFLAG
ADRES R04FLAG # SET R04FLAG FOR ALARMS
R04Z CAF EBANK4
TS EBANK
CAF 1SEC+1 # SAMPLE ONCE PER SECOND
TS RSAMPDT
CAF ZERO
TS RTSTLOC
TS RFAILCNT # ZERO BAD SAMPLE COUNTER
INHINT
CS LRPOSCAL # INITIALIZE
MASK RADMODES # BIT 9 LR RANGE LOW SCALE =0
TS RADMODES # BIT 6 LR POS 1 =0
CAF LRPOSCAL # BIT 3 RR RANGE LOW SCALE =0
EXTEND
RAND CHAN33
ADS RADMODES
RELINT
CS FLAGWRD3 # CHECK R04FLAG R04 =1 R77 =0
MASK R04FLBIT
CCS A
TCF R04K
CAF ONE # INDICATES RENDEZVOUS DESIRED
TS OPTIONX +1
R04A CAF BIT3 # OPTION CODE FOR V04N12
# Page 277
TS OPTIONX
CAF V04N12X
TC BANKCALL # R2 00001 RENDEZVOUS RADAR
CADR GOMARKFR # 00002 LANDING RADAR
TCF R04END # V34
TCF +5 # V33
TCF R04A +2 # R2
CAF BIT3
TC BLANKET
TC ENDOFJOB
CA OPTIONX +1 # SAVE DESIRED OPTION RR =1 LR =2
TS RTSTDEX
R04X CAF SIX # RR OR LR DESIRED
MASK RTSTDEX
CCS A
TCF R04L # LANDING RADAR
TS RTSTBASE # FOR RR BASE =0, MAX =1
R04B CAF BIT2 # IS RR AUTO MODE DISCRETE PRESENT
EXTEND
RAND CHAN33
EXTEND
BZF R04C # YES
CAF 201R04 # REQUEST SELECTION OF RR AUTO MODE
TS DSPTEM1
CAF V50N25X
TC BANKCALL
CADR GOMARK4
TCF R04END # V34
TCF R04B # V33
TCF -7 # E
R04C CAF BIT14 # ENABLE RR AUTO TRACKER
EXTEND
WOR CHAN12
CAF TWO
TS RTSTMAX # FOR SEQUENTIAL STORAGE
TC WAITLIST
## [WORKAROUND] RSB 2009
SBANK= PINSUPER
## [WORKAROUND]
EBANK= RSTACK
2CADR RADSAMP
RELINT
CS FLAGWRD3 # CHECK R04FLAG R04 =1 R77 =0
MASK R04FLBIT
# Page 278
CCS A
TCF GOPIN # R77
CAF SIX # RR OR LR
MASK RTSTDEX
CCS A
TCF R04LR # LR
R04RR CAF V16N72 # DISPLAY RR CDU ANGLES (1/SEC)
TC BANKCALL # R1 + XXX.XX DEG TRUNNION
CADR GOMARKF # R2 + XXX.XX DEG SHAFT
TCF R04END # V34 R3 BLANK
TCF +2 # V33
TCF R04RR # V32
CAF V16N78 # DISPLAY RR RANGE AND RANGE RATE (1/SEC)
TC BANKCALL # R1 +- XXX.XX NM RANGE
CADR GOMARKF # R2 +- XXXXX. FPS RANGE RATE
TCF R04END # V34 R3 BLANK
TCF R04Y # V33
TCF R04RR # V32
R04LR CAF V16N66 # DISPLAY LR RANGE AND POSITON (1/SEC)
TC BANKCALL # R1 +- XXXXX, FT LR RANGE
CADR GOMARKF # R2 + 0000X. POS. NO.
TCF R04END # V34 R3 BLANK
TCF +2 # V33
TCF R04LR # V32
CAF V16N67 # DISPLAY LR VELX, VELY, VELZ (1/SEC)
TC BANKCALL # R1 +- XXXXX. FPS LR V(X)
CADR GOMARKF # R2 +- XXXXX. FPS LR V(Y)
TCF R04END # V34 R3 +- XXXXX. FPS LR V(Z)
TCF R04Y # V33
TCF R04LR # V32
R04Y CAF ZERO # TO TERMINATE SAMPLING.
TS RSAMPDT
CAF 2SECS # WAIT FOR LAST RADARUP
TC BANKCALL
CADR DELAYJOB
CAF 1SEC+1 # SAMPLE ONCE PER SECOND
TS RSAMPDT
CAF ZERO # FOR STORING RESULTS
TS RTSTLOC
CAF SIX
MASK RTSTDEX
CCS A
CS ONE # WAS LR
AD TWO # WAS RR
# Page 279
TCF R04X -1
R04K CAF 250MS+1 # SAMPLE 4 LR COMPONENTS PER SECOND.
TS RSAMPDT
R04L CAF TWO
TS RTSTBASE # FOR LR BASE =2, MAX =3
CAF SIX
TCF R04C +4
R04END CAF ZERO # ZERO RSAMPDT
TS RSAMPDT # TO TERMINATE SAMPLING
CAF BIT8 # WAIT 1.28 SECONDS FOR POSSIBLE
TC BANKCALL # PENDING RUPT.
CADR DELAYJOB
INHINT
CS BIT14 # DISABLE RR AUTO TRACKER.
EXTEND
WAND CHAN12
TC DOWNFLAG
ADRES R04FLAG # SIGNAL END OF R04.
TC ENDEXT
R77END CAF EBANK4 # TO TERMINATE SAMPLING
TS EBANK
CAF ZERO
TS RSAMPDT
CAF BIT6 # WAIT 320 MS FOR POSSIBLE
TC BANKCALL # PENDING RUPT.
CADR DELAYJOB
TC DOWNFLAG
ADRES R77FLAG
TCF GOPIN
V16N72 VN 1672
V16N78 VN 1678
V16N66 VN 1666
V16N67 VN 1667
V04N12X VN 412
V50N25X VN 5025
201R04 OCT 00201
1SEC+1 DEC 101
250MS+1 EQUALS CALLCODE
LRPOSCAL OCT 444
# Page 280
RDRUSECK CS FLAGWRD3 # IS R29 ON?
MASK NR29FBIT
CCS A
TC ALM/END # YES
CA FLAGWRD5 # IS R77 RUNNING?
MASK R77FLBIT
CCS A
TC ALM/END # YES.
CS FLAGWRD7 # IS SERVICER RUNNING AND HENCE POSSIBLY
MASK V37FLBIT # R12 USING THE LR?
CCS A
TCF CHECKRR # NO
CS FLGWRD11 # YES, IS R12 ON?
MASK LRBYBIT
CCS A
TC ALM/END # YES
CHECKRR CS FLAGWRD1 # IS THE TRACK FLAG SET AND HENCE POSSIBLY
MASK TRACKBIT # P20 USING THE RR?
CCS A
TCF CHECKP22 # NO, CHECK FOR P22.
CKRNDBIT CA FLAGWRD0 # YES, BUT IS IT P25?
MASK RNDVZBIT
CCS A
TC ALM/END
CHECKP22 CS MODREG
AD DEC22
EXTEND
BZF ALM/END
TC Q
DEC22 DEC 22
COUNT* $$/EXTVB
VB64 TC CHKP00H # DEMAND PROGRAM 00.
TC TESTXACT # IF DISPLAY SYS. NOT BUSY MAKE IT BUSY.
CAF PRIO4
TC FINDVAC
EBANK= ALPHASB
2CADR SBANDANT # CALC., DISPLAY S-BAND ANTENNA ANGLES.
TC ENDOFJOB
# Page 281
# IMUATTCK VERB 43 DESCRIPTION
# LOAD IMU ATTITUDE ERROR METERS
#
# 1. REQUIRE P00 OR FRESH START.
# 2. REQUIRE COARSE ALIGN ENABLE AND ZERO ICDU BITS OFF.
# 3. REQUIRE THAT NEEDLES BE OFF.
# 4. REQUEST LOAD OF N22 (VALUES TO BE DISPLAYED).
# 5. ON PROCEED OR ENTER RE-DISPLAY V43 AND SEND PULSES.
IMUATTCK TC CHKP00H # VB 76 -- LOAD IMU ATT. ERROR METERS
CAF BITS4&5 # SEE IF COARSE ALIGN ENABLE AND ZERO IMU
EXTEND # CDUS BITS ARE ON
RAND CHAN12
CCS A
TCF ALM/END # NOT ALLOWED IF IMU COARSE OR IMU ZERO ON
CAF BIT13-14 # BOTH BITS 13 AND 14 MUST BE 1
EXTEND # INDICATING THE MODE SELECTED IS OFF.
RXOR CHAN31
MASK BIT13-14
EXTEND
BZF +2 # NEEDLES IS OFF.
TCF ALM/END # EXIT. NEEDLES IS ON.
TC TESTXACT
CAF VNLODCDU
TC BANKCALL
CADR GOXDSPF
TC ENDEXT # V34
TC +1
CAF V43K # REDISPLAY OUR VERB.
TC BANKCALL
CADR EXDSPRET
CAF BIT6
EXTEND
WOR CHAN12 # ENABLE ERROR COUNTERS.
CAF TWO
TC WAITLIST # PUT OUT COMMANDS IN .32 SECONDS.
EBANK= THETAD
2CADR ATTCK2
TCF ENDEXT
BANK 42
SETLOC PINBALL3 # SOMETHING IN B42.
BANK
COUNT* $$/EXTVB
# Page 282
ATTCK2 CAF TWO # PUT OUT COMMANDS.
+1 TS Q # CDU WILL LIMIT EXCESS DATA.
INDEX A
CA THETAD
EXTEND
MP ATTSCALE
INDEX Q
XCH CDUXCMD
CCS Q
TCF ATTCK2 +1
CAF 13,14,15
EXTEND
WOR CHAN14
TCF TASKOVER # LEAVE ERROR COUNTERS ENABLED.
ATTSCALE DEC 0.1
BANK 7
SETLOC EXTVERBS
BANK
COUNT* $$/EXTVB
V43K VN 4300
# V82PERF VERB82 DESCRIPTION
# REQUEST ORBIT PARAMETERS DISPLAY (R30)
#
# 1. IF AVERAGE G IS OFF:
# FLASH DISPLAY V04N06. R2 INDICATES WHICH SHIP'S STATE VECTOR IS
# TO BE UPDATED. INITIAL CHOICE IS THIS SHIP (R2=1). ASTRONAUT
# CAN CHANGE TO OTHER SHIP BY V22EXE, WHERE X NOT EQ I.
# SELECTED STATE VECTOR UPDATED BY THISPREC (OTHPREC).
# CALLS SR30.1 (WHICH CALLS TFFCONMU + TFFRP/RA) TO CALCULATE
# RPER (PERIGEE RADIUS), RAP0 (APOGEE RADIUS), HPER (PERIGEE
# HEIGHT ABOVE LAUNCH PAD OR LUNAR LANDING SITE), HAPO (APOGEE
# HEIGHT AS ABOVE), TPER (TIME TO PERIGEE), TFF (TIME TO
# INTERSECT 300 KFT ABOVE PAD OR 35KFT ABOVE LANDING SITE).
# FLASH MONITOR V16N44 (HAPO, HPER, TFF). TFF IS -59M59S IF IT WAS
# NOT COMPUTABLE, OTHERWISE IT INCREMENTS ONCE PER SECOND.
# ASTRONAUT HAS OPTION TO MONITOR TPER BY KEYING IN N 32 E.
# DISPLAY IS IN HMS, IS NEGATIVE (AS WAS TFF), AND INCREMENTS
# ONCE PER SECOND ONLY IF TFF DISPLAY WAS -59M59S.
#
# 2. IF AVERAGE G IS ON:
# CALLS SR30.1 APPROX EVERY TWO SECS. STATE VECTOR IS ALWAYS
# FOR THIS VEHICLE. V82 DOES NOT DISTURB STATE VECTOR. RESULTS
# OF SR30.1 ARE RAPO, RPER, HAPO, HPER, TPER, TFF.
# FLASH MONITOR V16N44 (HAPO, HPER, TFF).
# IF MODE IS P11, THEN CALL DELRSPL SO ASTRONAUT CAN MONITOR
# RESULTS BY N50E. SPLASH COMPUTATION DONE ONCE PER TWO SECS.
# Page 283
V82PERF TC TESTXACT
CAF PRIO7 # LESS THAN LAMBERT. R30,V82
TC PRIOCHNG
EXTEND
DCA V82CON
TC SUPDXCHZ # V82CALL IN DIFF SUPERBANK FROM V82PERF
EBANK= HAPO
V82CON 2CADR V82CALL
# VB83PERF VERB 83 DESCRIPTION
# REQUEST RENDEZVOUS PARAMETER DISPLAY (R31)
#
# 1. SET EXT VERB DISPLAY BUSY FLAG.
# 2. SCHEDULE R31CALL WITH PRIORITY 5.
# A. DISPLAY
# R1 RANGE
# R2 RANGE RATE
# R3 THETA
V83PERF TC TESTXACT
CAF BIT2
TC WAITLIST
EBANK= TSTRT
2CADR R31CALL
TC ENDOFJOB
# VERB 89 DESCRIPTION RENDEZVOUS FINAL ATTITUDE ROUTINE (R63)
#
# CALLED BY VERB 89 ENTER DURING P00. PRIO 10 IS USED. CALCULATES AND
# DISPLAYS FINAL FDAI BALL ANGLES TO POINT LM +X OR +Z AXIS AT CSM.
#
# 1. KEY IN V 89 E ONLY IF IN PROG 00. IF NOT IN P00, OPERATOR ERROR AND
# EXIT R63, OTHERWISE CONTINUE.
#
# 2. IF IN P00, DO IMU STATUS CHECK ROUTINE (R02BOTH). IF IMU ON AND ITS
# ORIENTATION KNOWN TO LGC,CONTINUE.
#
# 3. FLASH DISPLAY V 04 N 06. R2 INDICATES WHICH SPACECRAFT AXIS IS TO
# BE POINTED AT CSM. INITIAL CHOICE IS PREFERRED (+Z) AXIS (R2=1).
# ASTRONAUT CAN CHANGE TO (+X) AXIS (R2 NOT = 1) BY V 22 E 2 E. CONTINUE
# AFTER KEYING IN PROCEED.
#
# 4. BOTH VEHICLE STATE VECTORS UPDATED BY CONIC EQS.
#
# 5. HALF MAGNITUDE UNIT LOS VECTOR (IN STABLE MEMBER COORDINATES) AND
# Page 284
# HALF MAGNITUDE UNIT SPACECRAFT AXIS VECTOR (IN BODY COORDINATES)
# PREPARED FOR VECPOINT.
#
# 6. GIMBAL ANGLES FROM VECPOINT TRANSFORMED INTO FDAI BALL ANGLES BY
# BALLANGS. FLASH DISPLAY V 06 N 18 AND AWAIT RESPONSE.
#
# 7. RECYCLE -- RETURN TO STEP 4.
# TERMINATE -- EXIT R63.
# PROCEED -- RESET 3AXISFLG AND CALL R60LEM FOR ATTITUDE MANEUVER.
V89PERF TC CHKP00H
TC TESTXACT
CAF PRIO10
TC FINDVAC
EBANK= RONE
2CADR V89CALL
TC ENDOFJOB
# V90PERF VERB 90 DESCRIPTION
# REQUEST RENDEZVOUS OUT-OF-PLANE DISPLAY (R36)
#
# 1. SET EXT VERB DISPLAY BUSY FLAG.
# 2. SCHEDULE R36 CALL WITH PRIORITY 10
# A. DISPLAY
# TIME OF EVENT -- HOURS, MINUTES, SECONDS
# Y OUT-OF-PLANE POSITION -- NAUTICAL MILES
# YDOT OUT-OF-PLANE VELOCITY -- FEET/SECOND
# PSI ANGLE BTW LINE OF SIGHT AND FORWARD
# DIRECTION VECTOR IN HORIZONTAL PLANE -- DEGREES
V90PERF TC TESTXACT
CAF PRIO7 # R36,V90
TC FINDVAC
EBANK= RPASS36
2CADR R36
TCF ENDOFJOB
# MINIMP VERB 76 DESCRIPTION
# MINIMUM IMPULSE MODE
#
# 1. SET MINIMUM IMPULSE RHO MODE FLAG TO 1.
MINIMP INHINT
CS DAPBOOLS
MASK PULSES # PULSES = 1 INDICATES MIN IMP MODE
ADS DAPBOOLS
TCF GOPIN # RETURN VIA PINBRNCH
# NOMINIMP VERB 77 DESCRIPTION
# RATE COMMAND MODE
# Page 285
#
# 1. SET MINIMUM IMPULSE RHO MODE FLAG TO 0. (ZERO INDICATES NOT MINIMUM IMPULSE MODE.).
# 2. MOVE CDUX, CDUY, CDUZ INTO CDUXD, CDUYD, CDUZD.
NOMINIMP INHINT
CS PULSES
MASK DAPBOOLS
TS DAPBOOLS # PULSES = NOT IN MINIMUM UMPULSE MODE
TC IBNKCALL
CADR ZATTEROR
TC GOPIN
# Page 286
# CREMANU VERB 49 DESCRIPTION
# START AUTOMATIC ATTITUDE MANEUVER
#
# 1. REQUIRE PROGRAM 00 ACTIVE.
# 2. SET EXT VERB DISPLAY BUSY FLAG.
# 3. SCHEDULE R62DISP WITH PRIORITY 10.
# 4. RELEASE EXT VERB DISPLAY.
#
# R62DISP
# 1. DISPLAY FLASHING V06,N22.
# RESPONSES
# A. TERMINATE
# 1. GOTOP00H
# B. PROCEED
# 1. SET 3AXISFLG TO INDICATE MANEUVER IS SPECIFIED BY 3 AXIS.
# 2. EXECUTE R60LEM (ATTITUDE MANEUVER).
# C. ENTER
# 1. REPEAT FLASHING V06,N22.
CREWMANU TC CHKP00H # DEMAND P00
TC TESTXACT
CAF PRIO10
TC FINDVAC
EBANK= BCDU
2CADR R62DISP
TC ENDOFJOB
# Page 287
# TRMTRACK VERB 56 DESCRIPTION
# TERMINATE TRACKING (P20 AND P25).
#
# 1. KNOCK DOWN RENDEZVOUS, TRACK, AND UPDATE FLAGS.
# 2. REQUIRE P20 OR P25 NOT RUNNING ALONE OR GO TO GOGOP00H (REQUEST PROGRAM 00).
# 3. SCHEDULE V56TOVAC WITH PRIORITY 30.
#
# V56TOVAC
# 1. EXECUTE INTSTALL (IF INTEGRATION IS RUNNING, STALL UNTIL IT IS FINISHED.).
# 2. ZERO GROUP 2 TO HALT P20.
# 3. TRANSFER CONTROL TO GOPROG2 (SOFTWARE RESTART).
TRMTRACK CA BITS9+7 # IS REND OR P25 FLAG ON
MASK FLAGWRD0
EXTEND
BZF GOPIN # NO
TC DOWNFLAG
ADRES RNDVZFLG
TC DOWNFLAG
ADRES P25FLAG
TC DOWNFLAG # ENSURE SEARCH FLAG IS OFF
ADRES SRCHOPTN
CA TRACKBIT # IS TRACK FLAG ON?
MASK FLAGWRD1
EXTEND
BZF GOPIN
TC POSTJUMP
CADR TRMTRAK1
BITS9+7 OCT 500
SETLOC SBAND # BANK 42
BANK
COUNT* $$/EXTVB
TRMTRAK1 TC DOWNFLAG
ADRES UPDATFLG # UPDATE FLAG DOWN
TC DOWNFLAG
ADRES TRACKFLG # TRACK FLAG DOWN
TC DOWNFLAG
ADRES IMUSE
TC INTPRET
CALL
INTSTALL # DON'T INTERRUPT INTEGRATION
# Page 288
EXIT
TC PHASCHNG
OCT 2 # KILL GROUP 2 TO HALT P20 ACTIVITY
INHINT
TC IBNKCALL # ZERO THE COMMANDED RATES TO STOP
CADR STOPRATE # MANEUVER
TC IBNKCALL
CADR RESTORDB
TC CLRADMOD # CLEAR BITS 10 + 15 OF RADMODES.
CS BIT14 # DISABLE LOCKON
EXTEND
WAND CHAN12
TC POSTJUMP
CADR GOPROG2 # CAUSE RESTART.
# DNEDUMP VERB 74 DESCRIPTION
# INITIALZE DOWN-TELEMETRY PROGRAM FOR ERASABLE MEMORY DUMP.
#
# 1. SET EXT VERB DISPLAY BUSY FLAG.
# 2. REPLACE CURRENT DOWNLIST WITH ERASABLE MEMORY.
# 3. RELEASE EXT VERB DISPLAY.
SETLOC EXTVERBS
BANK
COUNT* $$/EXTVB
EBANK= 400
DNEDUMP CAF LDNDUMPI
TS DNTMGOTO
TC GOPIN
V74 EQUALS DNEDUMP
LDNDUMPI REMADR DNDUMPI
# LEMVEC VERB 80 DESCRIPTION
# UPDATE LEM STATE VECTOR
# RESET VHUPFLG TC 0
LEMVEC TC DOWNFLAG
ADRES VEHUPFLG # VB 80 -- VEHUPFLG DOWN INDICATES LEM
TC NOUPDOWN
# CSMVEC VERB 81 DESCRIPTION
# UPDATE CSM STATE VECTOR
# Page 289
# SET VEHUPFLG TO 1
CSMVEC TC UPFLAG
ADRES VEHUPFLG # VB 81 -- VEHUPFLG UP INDICATES CSM
NOUPDOWN TC DOWNFLAG
ADRES NOUPFLAG
TCF GOPIN
# UPDATOFF VERB 95 DESCRIPTION
# INHIBIT STATE VECTOR UPDATES BY INCORP
# SET NOUPFLAG TO 1
UPDATOFF TC UPFLAG # VB 95 SET NOUPFLAG
ADRES NOUPFLAG
TC GOPIN
# Page 290
# SYSTEST VERB 92 DESCRIPTION
# OPERATE IMU PERFORMANCE TEST.
#
# 1. REQUIRE PROGRAM 00 OR TURN ON OPERATOR ERROR.
# 2. SET EXT VERB BUSY FLAG.
EBANK= QPLACE
SYSTEST TC CHKP00H # DEMAND P00
TC TESTXACT
CAF PRIO22
TC FINDVAC
EBANK= QPLACE
SBANK= IMUSUPER
2CADR REDO
TC ENDOFJOB
# VERB 93 CLEAR RENDWFLG, CAUSES W-MATRIX TO BE RE-INITIALIZED.
WMATRXNG INHINT
CS RENDWBIT
MASK FLAGWRD5
TS FLAGWRD5
TC GOPIN
GOSHOSUM EQUALS SHOWSUM
SHOWSUM TC CHKP00H # *
TC TESTXACT # *
CAF PRIO7 # * ALLOW OTHER CHARINS.
TC PRIOCHNG # *
CAF S+1 # *
TS SKEEP6 # * SHOWSUM OPTION
CAF S+ZERO # *
TS SMODE # * TURN OFF SELF-CHECK
CA SELFADRS # *
TS SELFRET # *
TC STSHOSUM # * ENTER ROPECHK
SDISPLAY LXCH SKEEP2 # * BANK # FOR DISPLAY
LXCH SKEEP3 # * BUGGER WORD FOR DISPLAY
NOKILL CA ADRS1 # *
TS MPAC +2 # *
CA VNCON # * 0501
TC BANKCALL # *
CADR GOXDSPF # *
TC +3 # *
TC NXTBNK # *
# Page 291
TC NOKILL # *
CA SELFADRS
TS SKEEP1
TC ENDEXT # *
VNCON VN 501 # *
ENDSUMS CA SKEEP6 # *
EXTEND # *
BZF SELFCHK # * ROPECHK, START SELFCHK AGAIN.
TC STSHOSUM # * START SHOWSUM AGAIN.
# Page 292
# DAPDISP VERB 48 DESCRIPTION
# LOAD AUTO PILOT DATA
#
# 1. REQUIRE EXT VERB DISPLAY AVAILABLE AND SET BUSY FLAG.
# 2. EXECUTE DAPDATA1, DAPDATA2, AND DAPDATA3.
# 3. RELEASE EXT VERB DISPLAY SYSTEM.
DAPDISP TC TESTXACT
CAF PRIO7 # R03
TC PRIOCHNG
TC POSTJUMP
CADR DAPDATA1
BANK 34
SETLOC LOADDAP
BANK
COUNT* $$/R03
SBANK= LOWSUPER # FOR SUBSEQUENT LOW 2CADR'S
DAPDATA1 CAF BOOLSMSK # SET DISPLAY ACCORDING TO DAPBOOLS BITS.
MASK DAPBOOLS # LM
TS DAPDATR1 # LM
CS FLGWRD10 # SET BIT 14 TO BE COMPLEMENT OF APSFLAG.
MASK APSFLBIT
CCS A
CAF BIT14
ADS DAPDATR1
CHKDATA1 CAE DAPDATR1 # IF BITS 13 AND 14 ARE BOTH ZERO, FORCE
MASK BIT13-14 # A ONE INTO BIT 13.
EXTEND
BZF FORCEONE
CAE DAPDATR1 # ENSURE THAT NO ILLEGAL BITS SET BY CREW.
MSKDATR1 MASK DSPLYMSK
TS DAPDATR1
CAF V01N46 # LM
TC BANKCALL
CADR GOXDSPFR
TCF ENDEXT # V34E TERMINATE
TCF DPDAT1 # V33E PROCEED
TCF CHKDATA1 # E NEW DATA CHECK AND REDISPLAY
CAF REVCNT # BITS 2 & 3: BLANKS R2 & R3.
TC BLANKET
TCF ENDOFJOB
FORCEONE CAF BIT13
ADS DAPDATR1
TCF MSKDATR1
DPDAT1 INHINT # INHINT FOR SETTING OF FLAG BITS AND MASS
CS APSFLBIT # ON BASIS OF DISPLAYED DAPDATR1.
MASK FLGWRD10
TS L # SET APSFLAG TO BE COMPLEMENT OF BIT 14.
# Page 293
CS DAPDATR1
MASK BIT14
CCS A
CAF APSFLBIT
AD L
TS FLGWRD10
CS DAPDATR1 # SET BITS OF DAPBOOLS ON BASIS OF DISPLAY
MASK BIT13-14 # MASK OUT CSMDOCKD (BIT 13) UNLESS BOTH
CCS A # 13 AND 14 ARE SET.
CS CSMDOCKD
AD BOOLSMSK
MASK DAPDATR1
TS L
CS BOOLSMSK
MASK DAPBOOLS
AD L
TS DAPBOOLS
MASK CSMDOCKD # LOAD MASS IN ACCORDANCE WITH CSMDOCKD.
CCS A # MASS IS USUALLY OKAY, SO DO
CAE CSMMASS # NOT TOUCH ITS LOW-ORDER PART.
AD LEMMASS
TS MASS
CAE DAPBOOLS
MASK ACC4OR2X # 2 OR 4 JET X-TRANSLATION
EXTEND # (BIT ACC4OR2X = 1 FOR 4 JETS)
BZF +5
CS BIT15
MASK FLAGWRD1 # CLEAR NJTSFLAG TO 0 FOR 4 JETS
TS FLAGWRD1
TCF +4
CS FLAGWRD1 # SET NJTSFLAG TO 1 FOR 2 JETS
MASK BIT15
ADS FLAGWRD1
CA DAPBOOLS # SELECT DESIRED KALCMANU AUTOMATIC
MASK THREE # MANEUVER RATE
DOUBLE # RATEINDX HAS TO BE 0,2,4,6 SINCE RATES
TS RATEINDX # ARE DP
TC POSTJUMP
CADR STIKLOAD
V01N46 VN 0146
DSPLYMSK OCT 33113
BOOLSMSK OCT 13113
BANK 01
SETLOC LOADDAP1
BANK
COUNT* $$/R03
STIKLOAD CAF EBANK6
# Page 294
TS EBANK
EBANK= STIKSENS
CA RHCSCALE # SET STICK SENSITIVITY TO CORRESPOND TO A
MASK DAPBOOLS # MAXIMUM COMMANDED RATE (AT 42 COUNTS) OF
CCS A # 20 D/S (NORMAL) OR 4 D/S (FINE), SCALED
CA NORMAL # AT 45 D/S.
AD FINE
TS STIKSENS
CA -0.6D/S
TS -RATEDB # LM-ONLY BREAKOUT LEVEL IS .6 D/S.
CA CSMDOCKD # IF CSM-DOCKED, DIVIDE STICK SENSITIVITY
MASK DAPBOOLS # BY 10. NORMAL SCALING IS THEN 2 D/S AND
EXTEND # FINE SCALING IS 0.4 D/S
BZF +7 # BRANCH IF CSM IS NOT DOCKED.
CA STIKSENS
EXTEND
MP 1/10
TS STIKSENS
CA -0.3D/S # CSM-DOCKED BREAKOUT LEVEL IS .3 D/S.
TS -RATEDB
RELINT # PROCEED TO NOUN 47, MASS LOAD.
DAPDATA2 CAF V0647
TC BANKCALL
CADR GOXDSPFR
TCF ENDR03 # V34E TERMINATE. FIRST SET DB. DO 1/ACCS
TCF DAPDAT2 # V33E PROCEED
TCF DAPDATA2 # LOAD NEW DATA AND RECYCLE
CAF BIT3 # BLANKS R3
TC BLANKET # LM
TCF ENDOFJOB
ENDR03 INHINT
TC IBNKCALL
CADR RESTORDB
TCF ENDEXT # DOES RELINT
DAPDAT2 CS FLGWRD10 # DETERMINE STAGE FROM APSFLAG
MASK APSFLBIT
CCS A
CA MINLMD
AD MINMINLM
AD LEMMASS # LEMMASS MUST BE GREATER THAN EMPTY LEM
EXTEND
BZMF DAPDATA2 # ASK FOR NEW MASSES
CAE DAPBOOLS
MASK CSMDOCKD
EXTEND
BZF LEMALONE # SKIP TEST ON CSMMASS IF NOT DOCKED.
CS MINCSM # TEST CSM MASS
AD CSMMASS # CSMMASS MUST BE GREATER THAN EMPTY CSM
# Page 295
EXTEND
BZMF DAPDATA2 # ASK FOR NEW MASSES
CAE CSMMASS # DOCKED: MASS = CSMMASS + LEMMASS
LEMALONE AD LEMMASS # LEM ALONE: MASS = LEMMASS
ZL
DXCH MASS
INHINT
TC IBNKCALL # SET DEADBANK AND COMPUTE MOMENTS OF
CADR RESTORDB # INERTIA.
RELINT # PROCEED TO NOUN 48 (OR END).
DAPDATA3 CS FLGWRD10
MASK APSFLBIT
EXTEND # END ROUTINE IF LEM HAS STAGED.
BZF ENDEXT
CAF V06N48 # DISPLAY TRIM ANGLES AND REQUEST RESPONSE
TC BANKCALL
CADR GOXDSPFR
TC ENDEXT
TCF DPDAT3 # V33E GO DO TRIM (WAITLIST TO TRIMGIMB)
TCF -5 # LOAD NEW DATA AND RECYCLE
CAF BIT3
TC BLANKET # BLANK R3
TCF ENDOFJOB
DPDAT3 CAF BIT1 # GO TO TRIMGIMB VIA WAITLIST SO IT
INHINT # CAN USE FIXDELAY AND VARDELAY
TC WAITLIST
EBANK= ROLLTIME
2CADR TRIMGIMB
TCF ENDOFJOB # DOES A RELINT
TRIMDONE CAF V50N48
TC BANKCALL # TRIM IS FINISHED; PLEASE TERMINATE R03
CADR GOMARK3R
TC ENDEXT # V34E TERMINATE
TC ENDEXT
TC ENDEXT
CAF OCT24 # BIT5 TO CHANGE TO PERFORM, 3 TO BLANK 43
TC BLANKET
TCF ENDOFJOB
V0647 VN 0647
V06N48 VN 0648
V50N48 VN 5048
NORMAL DEC .660214
# NORMAL SCALING IS 20 D/S
FINE DEC .165054 # FINE STICK SCALING (4 D/S).
1/10 DEC .1 # FACTOR FOR CSM-DOCKED SCALING
-0.6D/S DEC -218
# Page 296
-0.3D/S DEC -109
# Page 297
# VERB 66 VEHICLES ARE ATTACHED. MOVE THIS VEHICLE STATE VECTOR TO
# OTHER VEHICLE STATE VECTOR.
#
# USE SUBROUTINE GENTRAN.
BANK 7
SETLOC EXTVERBS
BANK
COUNT* $$/EXTVB
EBANK= RRECTHIS
ATTACHED CAF PRIO10
TC FINDVAC
EBANK= RRECTHIS
2CADR ATTACHIT
TC ENDOFJOB
ATTACHIT TC INTPRET
CALL
INTSTALL
SET BON
MOONOTH
MOONTHIS
+3
CLEAR
MOONOTH
EXIT
CAF OCT51
TC GENTRAN
ADRES RRECTHIS # OUR STATE VECTOR INTO OTHER VIA GENTRAN
ADRES RRECTOTH
RELINT
TC INTPRET
CALL # UPDATE R-OTHER, V-OTHER
PTOALEM
LXA,2 CALL
PBODY
SVDWN1
EXIT
CAF TCPINAD
INDEX FIXLOC
TS QPRET
TC POSTJUMP
CADR INTWAKE # FREE INTEGRATION AND EXIT.
# Page 298
TCPIN RTB
PINBRNCH
OCT51 OCT 51
TCPINAD CADR TCPIN
# VERB 96 SET QUITFLAT TO STOP INTEGRATION.
#
# GO TO V37 WITH ZERO TO CAUSE P00.
# STATEINT WILL CHECK QUITFLAG AND SKIP 1ST PASS,
# THUS ALLOWING A 10 MINUT PERIOD WITHOUT INTEGRATION.
VERB96 TC UPFLAG # QUITFLAG WILL CAUSE INTEGRATION TO EXIT
ADRES QUITFLAG # AT NEXT TIMESTEP
CAF ZERO
TC POSTJUMP
CADR V37 # GO TO P00
# VERB 67: DISPLAY OF W MATRIX
V67 TC TESTXACT
CAF PRIO5
TC FINDVAC
EBANK= WWPOS
2CADR V67CALL
TC ENDOFJOB
# VERB 65 DISABLE U,V JETS DURING DPS BURNS
SNUFFOUT TC UPFLAG
ADRES SNUFFER
TC GOPIN
# VERB 75 ENABLE U,V JETS DURING DPS BURNS
OUTSNUFF TC DOWNFLAG
ADRES SNUFFER
TC GOPIN
# VERB 85 DISPLAY RR LOS AZIMUTH AND ELEVATION.
#
# AZIMUTH IS THE ANGLE BETWEEN THE LOS AND THE X-Z NB PLANE, 0-90 DEG IN THE +Y HEMISPHERE,
# 360-270 DEG IN THE -Y HEMISPHERE.
#
# ELEVATION IS THE ANGLE BETWEEN +ZNB AND THE PROJECTION OF THE LOS INTO THE X-Z PLANE, 0-360 ABOUT +Y.
EBANK= RR-AZ
VERB85 TC TESTXACT
# Page 299
TC POSTJUMP
CADR DSPRRLOS
SETLOC PINBALL1
BANK
COUNT* $$/EXTVB
DSPRRLOS CAF PRIO5
TC FINDVAC
EBANK= RR-AZ
2CADR RRLOSDSP
CAF PRIO4
TC PRIOCHNG
CAF V16N56
TC BANKCALL
CADR GOMARKFR
TC B5OFF
TC B5OFF
TC B5OFF
CAF BIT3
TC BLANKET
TC ENDOFJOB
RRLOSDSP EXTEND
DCA CDUT
DXCH MPAC
TC INTPRET
CALL
RRNBMPAC # GET RR LOS IN BODY AXIS.
STORE 0D # UNIT LOS
STODL 6D
HI6ZEROS
STOVL 8D
6D
UNIT
STORE 6D # UNIT OF LOS PROJ IN X-Z PLANE
DOT
UNITZ
STOVL COSTH # 16D
UNITX
DOT
6D
STCALL SINTH # 18D
ARCTRIG
BPL DAD # INSURE DISPLAY OF 0-360 DEG.
+2
DPPOSMAX # INTRODUCES AND ERROR OF B-28 REVS.
# Page 300
STOVL RR-ELEV
0D
DOT
UNITY
STOVL SINTH
0D
DOT
6D
STCALL COSTH
ARCTRIG
BPL DAD # INSURE DISPLAY OF 0-360 DEG.
+2
DPPOSMAX # INTRODUCES AN ERROR OF B-28 REVS.
STORE RR-AZ
EXIT
CA 1SEC
TC BANKCALL
CADR DELAYJOB
CA BIT5
MASK EXTVBACT
CCS A
TC RRLOSDSP
TC ENDEXT
V16N56 VN 1656