23af0c8942
* Update Page 1107 of INTERPRETER.agc * Update Page 1108 * Proofread Page 1110 * Update INTERPRETER.agc * Proofread P1113 * Proofread P1114 * Proofread P1115 * Proofread P1116 * Proofread P1117 and P1118
3064 lines
77 KiB
Plaintext
3064 lines
77 KiB
Plaintext
# Copyright: Public domain.
|
|
# Filename: INTERPRETER.agc
|
|
# Purpose: Part of the source code for Colossus 2A, AKA Comanche 055.
|
|
# It is part of the source code for the Command Module's (CM)
|
|
# Apollo Guidance Computer (AGC), for Apollo 11.
|
|
# Assembler: yaYUL
|
|
# Contact: Ron Burkey <info@sandroid.org>.
|
|
# Website: www.ibiblio.org/apollo.
|
|
# Pages: 1107-1199
|
|
# Mod history: 2009-05-08 RSB Adapted from the Luminary131/ file of the
|
|
# same name, using Comanche055 page images.
|
|
# 2009-05-20 RSB Corrections: P00D00 -> P00DOO, fixed a
|
|
# "Page N" reference.
|
|
# 2009-05-21 RSB Corrected definition of 5B10, which overflowed
|
|
# integer arithmetic.
|
|
#
|
|
# This source code has been transcribed or otherwise adapted from digitized
|
|
# images of a hardcopy from the MIT Museum. The digitization was performed
|
|
# by Paul Fjeld, and arranged for by Deborah Douglas of the Museum. Many
|
|
# thanks to both. The images (with suitable reduction in storage size and
|
|
# consequent reduction in image quality as well) are available online at
|
|
# www.ibiblio.org/apollo. If for some reason you find that the images are
|
|
# illegible, contact me at info@sandroid.org about getting access to the
|
|
# (much) higher-quality images which Paul actually created.
|
|
#
|
|
# Notations on the hardcopy document read, in part:
|
|
#
|
|
# Assemble revision 055 of AGC program Comanche by NASA
|
|
# 2021113-051. 10:28 APR. 1, 1969
|
|
#
|
|
# This AGC program shall also be referred to as
|
|
# Colossus 2A
|
|
|
|
# Page 1107
|
|
# SECTION 1: DISPATCHER
|
|
#
|
|
# ENTRY TO THE INTERPRETER. INTPRET SETS LOC TO THE FIRST INSTRUCTION, BANKSET TO THE BBANK OF THE
|
|
# OBJECT INTERPRETIVE PROGRAM, AND INTBIT15 TO THE BIT15 CONTENTS OF FBANK. INTERPRETIVE PROGRAMS MAY BE IN
|
|
# VIRTUALLY ALL BANKS PRESENT UNDER ANY SUPER-BANK SETTING, WITH THE RESTRICTION THAT PROGRAMS IN HIGH BANKS
|
|
# (BIT15 OF FBANK = 1) DO NOT REFER TO LOWBANKS, AND VICE-VERSA. THE INTERPRETER DOES NOT SWITCH SUPERBANKS.
|
|
# E-BANK SWITCHING OCCURS WHENEVER GENERAL ERASABLE (100-3777) IS ADDRESSED.
|
|
|
|
BLOCK 03
|
|
|
|
COUNT 03/INTER
|
|
|
|
INTPRET RELINT
|
|
EXTEND # SET LOC TO THE WORD FOLLOWING THE TC.
|
|
QXCH LOC
|
|
|
|
+2 CA BBANK # INTERPRETIVE BRANCHES FINISH HERE.
|
|
TS BANKSET
|
|
MASK BIT15 # GET 15TH BIT FOR INDEXABLE ADDRESSES.
|
|
TS INTBIT15
|
|
|
|
TS EDOP # MAKE SURE NO INSTRUCTIONS LEFT OVER
|
|
|
|
TCF NEWOPS # PICK UP OP CODE PAIR AND BEGIN.
|
|
|
|
|
|
INTRSM LXCH BBANK # RESUME SUSPENDED INTERPRETIVE JOB
|
|
TCF INTPRET +3
|
|
# DLOAD LOADS MPAC, MPAC +1, LEAVING ZERO IN MPAC +2.
|
|
|
|
DLOAD EXTEND
|
|
INDEX ADDRWD
|
|
DCA 0 # LOAD DP C(C(ADDRWD)) INTO MPAC,MPAX +1
|
|
SLOAD2 DXCH MPAC
|
|
CAF ZERO # ZERO MPAC +2
|
|
|
|
# Page 1108
|
|
# AT THE END OF MOST INSTRUCTIONS, CONTROL IS GIVEN TO DANZIG TO DISPATCH THE NEXT OPERATION.
|
|
|
|
TS MPAC +2 # AND DECLARE DP MODE
|
|
|
|
NEWMODE TS MODE # PROLOGUE FOR MODE-CHANGING INSTRUCTIONS.
|
|
|
|
DANZIG CA BANKSET # SET BBANK BEFORE TESTING NEWJOB SO THAT
|
|
TS BBANK # IT MAY BE SAVED DIRECTLY BY CHANJOB.
|
|
|
|
NOIBNKSW CCS EDOP # SEE IF AN ORDER CODE IS LEFT OVER FROM
|
|
TCF OPJUMP # THE LAST PAIR RETRIEVED. IF SO, EXECUTE.
|
|
# EDOP IS SET TO ZERO ON ITS RE-EDITING.
|
|
|
|
CCS NEWJOB # SEE IF A JOB OF HIGHER PRIORITY IS
|
|
TCF CHANG2 # PRESENT, AND IF SO, CHANGE JOBS.
|
|
|
|
INCR LOC # ADVANCE THE LOCATION COUNTER.
|
|
|
|
# ITRACE (1) REFERS TO "NEWOPS".
|
|
NEWOPS INDEX LOC # ENTRY TO BEGIN BY PICKING OP CODE PAIR.
|
|
CA 0 # MAY BE AN OPCODE PAIR OR A STORE CODE.
|
|
CCS A # TEST SIGN AND GET DABS(A).
|
|
TCF DOSTORE # PROCESS STORE CODE.
|
|
|
|
LOW7 OCT 177
|
|
|
|
TS EDOP # OP CODE PAIR. LEAVE THE OTHER IN EDOP
|
|
MASK LOW7 # WHERE CCS EDOP WILL HONOR IT NEXT.
|
|
|
|
OPJUMP TS CYR # LOWWD ENTERS HERE IF A RIGHT-HAND OP
|
|
CCS CYR # CODE IS TO BE PROCESSED. TEST PREFICES.
|
|
TCF OPJUMP2 # TEST SECOND PREFIX BIT.
|
|
|
|
TCF EXIT # +0 OP CODE IS EXIT
|
|
|
|
# Page 1109
|
|
# PROCESS ADDRESSES WHICH MAY BE DIRECT, INDEXED, OR REFERENCE THE PUSHDOWN LIST.
|
|
|
|
ADDRESS MASK BIT1 # SEE IF ADDRESS IS INDEXED. CYR CONTAINED
|
|
CCS A # 400XX, SO BIT 1 IS NOW AS IT WAS IN CYR.
|
|
TCF INDEX # FORM INDEXED ADDRESS.
|
|
|
|
DIRADRES INDEX LOC # LOOK AHEAD TO NEXT WORD TO SEE IF
|
|
OCT40001 CS 1 # ADDRESS IS GIVEN.
|
|
CCS A
|
|
TCF PUSHUP # IF NOT.
|
|
|
|
NEG4 DEC -4
|
|
|
|
INCR LOC # IF SO, TO SHOW WE PICKED UP A WORD.
|
|
TS ADDRWD
|
|
|
|
# Page 1110
|
|
# FINAL DIGESTION OF DIRECT ADDRESSES OF OP CODES WITH 01 PREFIX IS DONE HERE. IN EACH CASE, THE
|
|
# REQUIRED 12-BIT SUB-ADDRESS IS LEFT IN ADDRWD, WITH ANY REQUIRED E OR F BANK SWITCHING DONE. ADDRESSES LESS
|
|
# THAN 45D ARE TAKEN TO BE RELATIVE TO THE WORK AREA. THE OP CODE IS NOW IN BITS 1-5 OF CYR WITH BIT 14 = 1.
|
|
|
|
AD -ENDVAC # SEE IF ADDRESS RELATIVE TO WORK AREA.
|
|
CCS A
|
|
AD -ENDERAS # IF NOT, SEE IF IN GENERAL ERASABLE.
|
|
TCF IERASTST
|
|
|
|
NETZERO CA FIXLOC # IF SO, LEAVE THE MODIFIED ADDRESS IN
|
|
ADS ADDRWD # ADDRWD AND DISPATCH.
|
|
ITR15 INDEX CYR # THIS INDEX MAKES THE NEXT INSTRUCTION
|
|
7 INDJUMP -1 # TCF INDJUMP + OP, EDITING CYR.
|
|
|
|
IERASTST EXTEND
|
|
BZMF GEADDR # GO PROCESS GENERAL-ERASABLE ADDRESS.
|
|
|
|
MASK LOW10 # FIXED BANK ADDRESS. RESTORE AND ADD B15.
|
|
AD LOW10 # SWITCH BANKS AND LEAVE SUBADDRESS IN
|
|
XCH ADDRWD # ADDRWD FOR OPERAND RETRIEVAL. (THIS
|
|
AD INTBIT15 # METHOD PRECLUDES USE OF THE LAST
|
|
TS FBANK # LOCATION IN EACH FBANK.)
|
|
ITR12 INDEX CYR
|
|
7 INDJUMP -1
|
|
|
|
GEADDR MASK LOW8
|
|
AD OCT1400
|
|
XCH ADDRWD
|
|
TS EBANK
|
|
ITR10 INDEX CYR
|
|
7 INDJUMP -1
|
|
|
|
# Page 1111
|
|
# THE FOLLOWING ROUTINE PROCESSES INTERPRETIVE INDEXED ADDRESSES. AN INTERPRETER INDEX REGISTER MAY
|
|
# CONTAIN THE ADDRESS OF ANY ERASABLE REGISTER (0-42 BEING RELATIVE TO THE VAC AREA) OR ANY INTERPRETIVE PROGRAM
|
|
# BANK, OR ANY INTEGER IN THAT RANGE.
|
|
|
|
DODLOAD* CAF DLOAD* # STODL* COMES HERE TO PROCESS LOAD ADR.
|
|
TS CYR # (STOVL* ENTERS HERE).
|
|
|
|
INDEX CA FIXLOC # SET UP INDEX LOCATION.
|
|
TS INDEXLOC
|
|
INCR LOC # (ADDRESS ALWAYS GIVEN).
|
|
INDEX LOC
|
|
CS 0
|
|
CCS A # INDEX 2 IF ADDRESS STORED COMPLEMENTED.
|
|
INCR INDEXLOC
|
|
NOOP
|
|
|
|
TS ADDRWD # 14 BIT ADDRESS TO ADDRWD.
|
|
MASK HIGH4 # IF ADDRESS GREATER THAN 2K, ADD INTBIT15
|
|
EXTEND
|
|
BZF INDEX2
|
|
CA INTBIT15
|
|
ADS ADDRWD
|
|
|
|
INDEX2 INDEX INDEXLOC
|
|
CS X1
|
|
ADS ADDRWD # DO AUGMENT, IGNORING AND CORRECTING OVF.
|
|
|
|
MASK HIGH9 # SEE IF ADDRESS IS IN WORK AREA.
|
|
EXTEND
|
|
BZF INDWORK
|
|
MASK HIGH4 # SEE IF IN FIXED BANK.
|
|
EXTEND
|
|
BZF INDERASE
|
|
|
|
CA ADDRWD # IN FIXED -- SWITCH BANKS AND CREATE
|
|
TS FBANK # SUB-ADDRESS
|
|
MASK LOW10
|
|
AD 2K
|
|
TS ADDRWD
|
|
ITR11 INDEX CYR
|
|
3 INDJUMP -1
|
|
|
|
INDWORK CA FIXLOC # MAKE ADDRWD RELATIVE TO WORK AREA.
|
|
TCF ITR13 -1
|
|
|
|
INDERASE CA OCT1400
|
|
XCH ADDRWD
|
|
TS EBANK
|
|
MASK LOW8
|
|
-1 ADS ADDRWD
|
|
# Page 1112
|
|
ITR13 INDEX CYR
|
|
3 INDJUMP -1
|
|
|
|
# Page 1113
|
|
# PUSH-UP ROUTINES. WHEN NO OPERAND ADDRESS IS GIVEN, THE APPROPRIATE OPERAND IS TAKEN FROM THE PUSH-DOWN
|
|
# LIST. IN MOST CASES THE MODE OF THE RESULT (VECTOR OR SCALAR) OF THE LAST ARITHMETIC OPERATION PERFORMED
|
|
# IS THE SAME AS THE TYPE OF OPERAND DESIRED (ALL ADD/SUBTRACT ETC.). EXCEPTIONS TO THIS GENERAL RULE ARE LISTED
|
|
# BELOW (NOTE THAT IN EVERY CASE THE MODE REGISTER IS LEFT INTACT):
|
|
#
|
|
# 1. VXSC AND V/SC WANT THE OPPOSITE TYPE OF OPERAND, E.G., IF THE LAST OPERATION YIELDED A VECTOR
|
|
# RESULT, VXSC WANTS A SCALAR.
|
|
#
|
|
# 2. THE LOAD CODES SHOULD LOAD THE ACCUMULATOR INDEPENDENT OF THE RESULT OF THE LAST OPERATION. THIS
|
|
# INCLUDES VLOAD, DLOAD, TLOAD, PDDL, AND PDVL (NO PUSHUP WITH SLOAD).
|
|
#
|
|
# 3. SOME ARITHMETIC OPERATIONS REQUIRE A STANDARD TYPE OF OPERAND REGARDLESS OF THE PREVIOUS OPERATION.
|
|
# THIS INCLUDES SIGN WANTING DP AND TAD REQUIRING TP.
|
|
|
|
PUSHUP CAF OCT23 # IF THE LOW 5 BITS OF CYR ARE LESS THAN
|
|
MASK CYR # 20, THIS OP REQUIRES SPECIAL ATTENTION.
|
|
AD -OCT10 # (NO -0).
|
|
CCS A
|
|
TCF REGUP # FOR ALL CODES GREATER THAN OCT 7.
|
|
|
|
-OCT10 OCT -10
|
|
|
|
AD NEG4 # WE NOW HAVE 7 -- OP CODE (MOD4). SEE IF
|
|
CCS A # THE OP CODE (MOD4) IS THREE (REVERSE).
|
|
INDEX A # NO -- THE MODE IS DEFINITE. PICK UP THE
|
|
CS NO.WDS
|
|
TCF REGUP +2
|
|
|
|
INDEX MODE # FOR VXSC AND V/SC WE WANT THE REQUIRED
|
|
CS REVCNT # PUSHLOC DECREMENT WITHOUT CHANGING THE
|
|
TCF REGUP +2 # MODE AT THIS TIME.
|
|
|
|
REGUP INDEX MODE # MOST ALL OP CODES PUSHUP HERE.
|
|
CS NO.WDS
|
|
+2 ADS PUSHLOC
|
|
TS ADDRWD
|
|
ITR14 INDEX CYR
|
|
7 INDJUMP -1 # (THE INDEX MAKES THIS A TCF.)
|
|
|
|
OCT 2 # REVERSE PUSHUP DECREMENT. VECTOR TAKES 2
|
|
REVCNT OCT 6 # WORDS, SCALAR TAKES 6.
|
|
OCT 6
|
|
NO.WDS OCT 2 # CONVENTIONAL DECREMENT IS 6 WORDS VECTOR
|
|
OCTAL3 OCT 3 # 2 IN DP, AND 3 IN TP.
|
|
OCT 6
|
|
|
|
# Page 1114
|
|
# TEST THE SECOND PREFIX BIT TO SEE IF THIS IS A MISCELLANEOUS OR A UNARY/SHORT SHIFT OPERATION.
|
|
|
|
OPJUMP2 CCS CYR # TEST SECOND PREFIX BIT.
|
|
TCF OPJUMP3 # TEST THIRD BIT TO SEE IF UNARY OR SHIFT.
|
|
|
|
-ENDVAC DEC -45
|
|
|
|
# THE FOLLOWING ROUTINE PROCESSES ADDRESSES OF SUFFIX CLASS 10. THEY ARE BASICALLY WORK AREA ADDRESSES
|
|
# IN THE RANGE 0-52, ERASABLE ECADR CONSTANTS FROM 100-3777, AND FCADRS ABOVE THAT. ALL 15 BITS ARE AVAILABLE
|
|
# IN CONTRAST TO SUFFIX 1, IN WHICH ONLY THE LOW ORDER 14 ARE AVAILABLE.
|
|
|
|
15BITADR INCR LOC # (ENTRY HERE FROM STCALL).
|
|
INDEX LOC # PICK UP ADDRESS WORD.
|
|
CA 0
|
|
TS POLISH # WE MAY NEED A SUBADDRESS LATER.
|
|
|
|
CAF LOW7+2K # THESE INSTRUCTIONS ARE IN BANK 1.
|
|
TS FBANK
|
|
MASK CYR
|
|
ITR7 INDEX A
|
|
TCF MISCJUMP
|
|
|
|
# Page 1115
|
|
# COMPLETE THE DISPATCHING OF UNARY AND SHORT SHIFT OPERATIONS.
|
|
|
|
OPJUMP3 TS FBANK # CALL IN BANK 0 (BITS 11-15 OF A ARE 0.)
|
|
# ITRACE (6) REFERS TO "OPJUMP3".
|
|
CCS CYR # TEST THIRD PREFIX BIT.
|
|
INDEX A # THE DECREMENTED UNARY CODE IS IN BITS
|
|
TCF UNAJUMP # 1-4 OF A (ZERO, EXIT, HAS BEEN DETECTED)
|
|
|
|
CCS MODE # IT'S A SHORT SHIFT CODE. SEE IF PRESENT
|
|
TCF SHORTT # SCALAR OR VECTOR.
|
|
TCF SHORTT
|
|
TCF SHORTV # CALLS THE APPROPRIATE ROUTINE.
|
|
|
|
FBANKMSK EQUALS BANKMASK
|
|
LVBUF ADRES VBUF
|
|
|
|
# Page 1116
|
|
# THE FOLLOWING IS THE JUMP TABLE FOR OP CODES WHICH MAY HAVE INDEXABLE ADDRESSES OR MAY PUSH UP.
|
|
|
|
INDJUMP TCF VLOAD # 00 -- LOAD MPAC WITH A VECTOR.
|
|
TCF TAD # 01 -- TRIPLE PRECISION ADD TO MPAC.
|
|
TCF SIGN # 02 -- COMPLEMENT MPAC (V OR SC) IF X NEG.
|
|
TCF VXSC # 03 -- VECTOR TIMES SCALAR.
|
|
TCF CGOTO # 04 -- COMPUTED GO TO.
|
|
TCF TLOAD # 05 -- LOAD MPAC WITH TRIPLE PRECISION.
|
|
TCF DLOAD # 06 -- LOAD MPAC WITH A DP SCALAR.
|
|
TCF V/SC # 07 -- VECTOR DIVIDED BY SCALAR.
|
|
|
|
TCF SLOAD # 10 -- LOAD MPAC IN SINGLE PRECISION.
|
|
TCF SSP # 11 -- SET SINGLE PRECISION INTO X.
|
|
TCF PDDL # 12 -- PUSH DOWN MPAC AND RE-LOAD IN DP.
|
|
TCF MXV # 13 -- MATRIX POST-MULTIPLIED BY VECTOR.
|
|
TCF PDVL # 14 -- PUSH DOWN AND VECTORLOAD.
|
|
TCF CCALL # 15 -- COMPUTED CALL.
|
|
TCF VXM # 16 -- MATRIX PRE-MULTIPLIED BY VECTOR.
|
|
TCF TSLC # 17 -- NORMALIZE MPAC (SCALAR ONLY).
|
|
|
|
TCF DMPR # 20 -- DP MULTIPLY AND ROUND.
|
|
TCF DDV # 21 -- DP DIVIDE BY.
|
|
TCF BDDV # 22 -- DP DIVIDE INTO.
|
|
TCF GSHIFT # 23 -- GENERAL SHIFT INSTRUCTION
|
|
TCF VAD # 24 -- VECTOR ADD.
|
|
TCF VSU # 25 -- VECTOR SUBTRACT.
|
|
TCF BVSU # 26 -- VECTOR SUBTRACT FROM.
|
|
TCF DOT # 27 -- VECTOR DOT PRODUCT.
|
|
|
|
TCF VXV # 30 -- VECTOR CROSS PRODUCT.
|
|
TCF VPROJ # 31 -- VECTOR PROJECTION.
|
|
TCF DSU # 32 -- DP SUBTRACT.
|
|
TCF BDSU # 33 -- DP SUBTRACT FROM.
|
|
TCF DAD # 34 -- DP ADD.
|
|
TCF # 35 -- AVAILABLE
|
|
TCF DMP1 # 36 -- DP MULTIPLY.
|
|
TCF SETPD # 37 -- SET PUSH DOWN POINTER (DIRECT ONLY)
|
|
|
|
# CODES 10 AND 14 MUST NOT PUSH UP. CODE 04 MAY BE USED FOR VECTOR DECLARE BEFORE PUSHUP IF DESIRED.
|
|
|
|
# Page 1117
|
|
# THE FOLLOWING JUMP TABLE APPLIES TO INDEX, BRANCH, AND MISCELLANEOUS INSTRUCTIONS.
|
|
|
|
MISCJUMP TCF AXT # 00 -- ADDRESS TO INDEX TRUE.
|
|
TCF AXC # 01 -- ADDRESS TO INDEX COMPLEMENTED.
|
|
TCF LXA # 02 -- LOAD INDEX FROM ERASABLE.
|
|
TCF LXC # 03 -- LOAD INDEX FROM COMPLEMENT OF ERAS.
|
|
TCF SXA # 04 -- STORE INDEX IN ERASABLE.
|
|
TCF XCHX # 05 -- EXCHANGE INDEX WITH ERASABLE.
|
|
TCF INCR # 06 -- INCREMENT INDEX REGISTER.
|
|
TCF TIX # 07 -- TRANSFER ON INDEX.
|
|
|
|
TCF XAD # 10 -- INDEX REGISTER ADD FROM ERASABLE.
|
|
TCF XSU # 11 -- INDEX SUBTRACT FROM ERASABLE.
|
|
TCF BZE/GOTO # 12 -- BRANCH ZERO AND GOTO.
|
|
TCF BPL/BMN # 13 -- BRANCH PLUS AND BRANCH MINUS.
|
|
TCF RTB/BHIZ # 14 -- RETURN TO BASIC AND BRANCH HI ZERO.
|
|
TCF CALL/ITA # 15 -- CALL AND STORE QPRET.
|
|
TCF SW/ # 16 -- SWITCH INSTRUCTIONS AND AVAILABLE.
|
|
TCF BOV(B) # 17 -- BRANCH ON OVERFLOW TO BASIC OR INT.
|
|
|
|
# Page 1118
|
|
# THE FOLLOWING JUMP TABLE APPLIES TO UNARY INSTRUCTIONS
|
|
|
|
COUNT 00/INTER
|
|
|
|
BANK 0 # 00 -- EXIT -- DETECTED EARLIER.
|
|
UNAJUMP TCF SQRT # 01 -- SQUARE ROOT.
|
|
TCF SINE # 02 -- SIN.
|
|
TCF COSINE # 03 -- COS.
|
|
TCF ARCSIN # 04 -- ARC SIN.
|
|
TCF ARCCOS # 05 -- ARC COS.
|
|
TCF DSQ # 06 -- DP SQUARE.
|
|
TCF ROUND # 07 -- ROUND TO DP.
|
|
|
|
TCF COMP # 10 -- COMPLEMENT VECTOR OR SCALAR
|
|
TCF VDEF # 11 -- VECTOR DEFINE.
|
|
TCF UNIT # 12 -- UNIT VECTOR.
|
|
TCF ABVALABS # 13 -- LENGTH OF VECTOR OR MAG OF SCALAR.
|
|
TCF VSQ # 14 -- SQUARE OF LENGTH OF VECTOR.
|
|
TCF STADR # 15 -- PUSH UP ON STORE CODE.
|
|
TCF RVQ # 16 -- RETURN VIA QPRET.
|
|
TCF PUSH # 17 -- PUSH MPAC DOWN.
|
|
|
|
# Page 1119
|
|
# SECTION 2 LOAD AND STORE PACKAGE.
|
|
#
|
|
# A SET OF EIGHT STORE CODES IS PROVIDED AS THE PRIMARY METHOD OF STORING THE MULTI-PURPOSE
|
|
# ACCUMULATOR (MPAC). IF IN THE DANZIG SECTION LOC REFERS TO AN ALGEBRAICALLY POSITIVE WORD, IT IS TAKEN AS A
|
|
# STORE CODE WITH A CORRESPONDING ERASABLE ADDRESS. MOST OF THESE CODES ARE TWO ADDRESS, SPECIFYING THAT THE WORD
|
|
# FOLLOWING THE STORE CODE IS TO BE USED AS AN ADDRESS FROM WHICH TO RE-LOAD MPAC. FOUR OPTIONS ARE AVAILABLE:
|
|
#
|
|
# 1. STORE STORE MPAC. THE E ADDRESS MAY BE INDEXED.
|
|
# 2. STODL STORE MPAC AND RE-LOAD IT IN DP WITH THE NEXT ADDRESS (THE LOAD MAY BE INDEXED).
|
|
# 3. STOVL STORE MPAC AND RE-LOAD A VECTOR (AS ABOVE).
|
|
# 4. STCALL STORE AND DO A CALL (BOTH ADDRESSES MUST BE DIRECT HERE).
|
|
#
|
|
# STODL AND STOVL WILL TAKE FROM THE PUSH-DOWN LIST IF NO LOAD ADDRESS IS GIVEN.
|
|
|
|
BLOCK 3
|
|
|
|
COUNT 03/INTER
|
|
|
|
STADR CA BANKSET # THE STADR CODE (PUSHUP UP ON STORE
|
|
TS FBANK # ADDRESS) ENTERS HERE.
|
|
INCR LOC
|
|
ITR1 INDEX LOC # THE STORECODE WAS STORED COMPLEMENTED TO
|
|
CS 0 # MAKE IT LOOK LIKE AN OPCODE PAIR.
|
|
AD NEGONE # (YUL CANT REMOVE 1 BECAUSE OF EARLY CCS)
|
|
|
|
DOSTORE TS ADDRWD
|
|
MASK LOW11 # ENTRY FROM DISPATCHER. SAVE THE ERASABLE
|
|
XCH ADDRWD # ADDRESS AND JUMP ON THE STORE CODE NO.
|
|
MASK B12T14
|
|
EXTEND
|
|
MP BIT5 # EACH TRANSFER VECTOR ENTRY IS TWO WORDS.
|
|
ITR0 INDEX A
|
|
TCF STORJUMP
|
|
|
|
# Page 1120
|
|
# STORE CODE JUMP TABLE. CALLS THE APPROPRIATE STORING ROUTINE AND EXITS TO DANZIG OR TO ADDRESS WITH
|
|
# A SUPPLIED OPERATION CODE.
|
|
#
|
|
# STORE STORE,1 AND STORE,2 RETURN TO DANZIG, THUS RESETTING THE EBANK TO ITS STATE AT INTPRET.
|
|
|
|
STORJUMP TC STORE # STORE.
|
|
TCF DANZIG # PICK UP NEW OP CODE(S).
|
|
TC STORE,1
|
|
TCF DANZIG
|
|
TC STORE,2
|
|
TCF DANZIG
|
|
|
|
TC STORE # STODL.
|
|
TCF DODLOAD
|
|
|
|
TC STORE # STODL WITH INDEXED LOAD ADDRESS.
|
|
TCF DODLOAD*
|
|
|
|
TC STORE # STOVL.
|
|
TCF DOVLOAD
|
|
|
|
TC STORE # STOVL WITH INDEXED LOAD ADDRESS.
|
|
TCF DOVLOAD*
|
|
TC STORE # STOTC.
|
|
CAF CALLCODE
|
|
TS CYR
|
|
TCF 15BITADR # GET A 15 BIT ADDRESS.
|
|
|
|
# Page 1121
|
|
# STORE CODE ADDRESS PROCESSOR.
|
|
|
|
STORE,1 INDEX FIXLOC
|
|
CS X1
|
|
TCF PRESTORE
|
|
|
|
STORE,2 INDEX FIXLOC
|
|
CS X2
|
|
PRESTORE ADS ADDRWD # RESULTANT ADDRESS IS IN ERASABLE.
|
|
|
|
STORE CS ADDRWD
|
|
AD DEC45
|
|
CCS A # DOES THE ADDRESS POINT TO THE WORK AREA?
|
|
CA FIXLOC # YES.
|
|
TCF AHEAD5
|
|
CA OCT1400 # NO. SET EBANK & MAKE UP SUBADDRESS.
|
|
XCH ADDRWD
|
|
TS EBANK
|
|
MASK LOW8
|
|
AHEAD5 ADS ADDRWD
|
|
|
|
# Page 1122
|
|
# STORING ROUTINES. STORE DP, TP, OR VECTOR AS INDICATED BY MODE.
|
|
|
|
STARTSTO EXTEND # MPAC,+1 MUST BE STORED IN ANY EVENT.
|
|
# ITRACE (5) REFERS TO "STARTSTO".
|
|
DCA MPAC
|
|
INDEX ADDRWD
|
|
DXCH 0
|
|
|
|
CCS MODE
|
|
TCF TSTORE
|
|
TC Q
|
|
|
|
VSTORE EXTEND
|
|
DCA MPAC +3
|
|
INDEX ADDRWD
|
|
DXCH 2
|
|
|
|
EXTEND
|
|
DCA MPAC +5
|
|
INDEX ADDRWD
|
|
DXCH 4
|
|
TC Q
|
|
|
|
TSTORE CA MPAC +2
|
|
INDEX ADDRWD
|
|
TS 2
|
|
TC Q
|
|
|
|
# Page 1123
|
|
# ROUTINES TO BEGIN PROCESSING OF THE SECOND ADDRESS ASSOCIATED WITH ALL STORE-TYPE CODES EXCEPT STORE
|
|
# ITSELF.
|
|
|
|
DODLOAD CAF DLOADCOD
|
|
TS CYR
|
|
TCF DIRADRES # GO GET A DIRECT ADDRESS.
|
|
|
|
DOVLOAD CAF VLOADCOD
|
|
TS CYR
|
|
TCF DIRADRES
|
|
|
|
DOVLOAD* CAF VLOAD*
|
|
TCF DODLOAD* +1 # PROLOGUE TO INDEX ROUTINE.
|
|
|
|
# Page 1124
|
|
# THE FOLLOWING LOAD INSTRUCTIONS ARE PROVIDED FOR LOADING THE MULTI-PURPOSE ACCUMULATOR MPAC.
|
|
|
|
TLOAD INDEX ADDRWD
|
|
CA 2 # LOAD A TRIPLE PRECISION ARGUMENT INTO
|
|
TS MPAC +2 # THE FIRST THREE MPAC REGISTERS, WITH THE
|
|
EXTEND # CONTENTS OF THE OTHER FOUR IRRELEVANT.
|
|
INDEX ADDRWD
|
|
DCA 0
|
|
DXCH MPAC
|
|
TMODE CAF ONE
|
|
TCF NEWMODE # DECLARE TRIPLE PRECISION MODE.
|
|
|
|
SLOAD ZL # LOAD A SINGLE PRECISION NUMBER INTO
|
|
INDEX ADDRWD # MPAC, SETTING MPAC+1,2 TO ZERO. THE
|
|
CA 0 # CONTENTS OF THE REMAINING MPAC REGISTERS
|
|
TCF SLOAD2 # ARE IRRELEVANT.
|
|
|
|
VLOAD EXTEND # LOAD A DOUBLE PRECISION VECTOR INTO
|
|
INDEX ADDRWD # MPAC,+1, MPAC+3,4, AND MPAC+5,6. THE
|
|
DCA 0 # CONTENTS OF MPAC +2 ARE IRRELEVANT.
|
|
DXCH MPAC
|
|
|
|
ENDVLOAD EXTEND # PDVL COMES HERE TO FINISH UP FOR DP, TP.
|
|
INDEX ADDRWD
|
|
DCA 2
|
|
DXCH MPAC +3
|
|
|
|
+4 EXTEND # TPDVL FINISHES HERE.
|
|
INDEX ADDRWD
|
|
DCA 4
|
|
DXCH MPAC +5
|
|
|
|
VMODE CS ONE # DECLARE VECTOR MODE.
|
|
TCF NEWMODE
|
|
|
|
# Page 1125
|
|
# THE FOLLOWING INSTRUCTIONS ARE PROVIDED FOR STORING OPERANDS IN THE PUSHDOWN LIST:
|
|
# 1. PUSH PUSHDOWN AND NO LOAD.
|
|
# 2. PDDL PUSHDOWN AND DOUBLE PRECISION LOAD.
|
|
# 3. PDVL PUSHDOWN AND VECTOR LOAD.
|
|
|
|
PDDL EXTEND
|
|
INDEX ADDRWD # LOAD MPAC,+1, PUSHING THE FORMER
|
|
DCA 0 # CONTENTS DOWN.
|
|
DXCH MPAC
|
|
INDEX PUSHLOC
|
|
DXCH 0
|
|
|
|
INDEX MODE # ADVANCE THE PUSHDOWN POINTER APPRO-
|
|
CAF NO.WDS # PRIATELY.
|
|
ADS PUSHLOC
|
|
|
|
CCS MODE
|
|
TCF ENDTPUSH
|
|
TCF ENDDPUSH
|
|
|
|
TS MODE # NOW DP.
|
|
ENDVPUSH TS MPAC +2
|
|
DXCH MPAC +3 # PUSH DOWN THE REST OF THE VECTOR HERE.
|
|
INDEX PUSHLOC
|
|
DXCH 0 -4
|
|
|
|
DXCH MPAC +5
|
|
INDEX PUSHLOC
|
|
DXCH 0 -2
|
|
|
|
TCF DANZIG
|
|
|
|
ENDDPUSH TS MPAC +2 # SET MPAC +2 TO ZERO AND EXIT ON DP.
|
|
TCF DANZIG
|
|
|
|
ENDTPUSH TS MODE
|
|
XCH MPAC +2 # ON TRIPLE, SET MPAC +2 TO ZERO, PUSHING
|
|
+2 INDEX PUSHLOC # DOWN THE OLD CONTENTS
|
|
TS 0 -1
|
|
TCF DANZIG
|
|
|
|
# Page 1126
|
|
# PDVL -- PUSHDOWN AND VECTOR LOAD
|
|
|
|
PDVL EXTEND # RELOAD MPAC AND PUSH DOWN ITS CONTENTS.
|
|
INDEX ADDRWD
|
|
DCA 0
|
|
DXCH MPAC
|
|
INDEX PUSHLOC
|
|
DXCH 0
|
|
|
|
INDEX MODE # ADVANCE THE PUSHDOWN POINTER.
|
|
CAF NO.WDS
|
|
ADS PUSHLOC
|
|
|
|
CCS MODE # TEST PAST MODE.
|
|
TCF TPDVL
|
|
TCF ENDVLOAD # JUST LOAD LAST FOUR REGISTERS ON DP.
|
|
|
|
VPDVL EXTEND # PUSHDOWN AND RE-LOAD LAST TWO COMPONENTS
|
|
INDEX ADDRWD
|
|
DCA 2
|
|
DXCH MPAC +3
|
|
INDEX PUSHLOC
|
|
DXCH 0 -4
|
|
|
|
EXTEND
|
|
INDEX ADDRWD
|
|
DCA 4
|
|
DXCH MPAC +5
|
|
INDEX PUSHLOC
|
|
DXCH 0 -2
|
|
|
|
TCF DANZIG
|
|
|
|
TPDVL EXTEND # ON TP, WE MUST LOAD THE Y COMPONENT
|
|
INDEX ADDRWD # BEFORE STORING MPAC +2 IN CASE THIS IS A
|
|
DCA 2 # PUSHUP.
|
|
DXCH MPAC +3
|
|
|
|
CA MPAC +2
|
|
INDEX PUSHLOC # IN DP.
|
|
TS 0 -1
|
|
TCF ENDVLOAD +4
|
|
|
|
# SSP (STORE SINGLE PRECISION) IS EXECUTED HERE.
|
|
|
|
SSP INCR LOC # PICK UP THE WORD FOLLOWING THE GIVEN
|
|
INDEX LOC # ADDRESS AND STORE IT AT X.
|
|
CA 0
|
|
STORE1 INDEX ADDRWD # SOME INDEX AND MISCELLANEOUS OPS END
|
|
TS 0 # HERE.
|
|
# Page 1127
|
|
TCF DANZIG
|
|
|
|
# Page 1128
|
|
# SEQUENCE CHANGING AND SUBROUTINE CALLING OPTIONS.
|
|
#
|
|
# THE FOLLOWING OPERATIONS ARE AVAILABLE FOR SEQUENCING CHANGING, BRANCHING, AND CALLING SUBROUTINES:
|
|
# 1. GOTO GO TO.
|
|
# 2. CALL CALL SUBROUTINE SETTING QPRET.
|
|
# 3. CGOTO COMPUTED GO TO.
|
|
# 4. CCALL COMPUTED CALL.
|
|
# 7. BPL BRANCH IF MPAC POSITIVE OR ZERO.
|
|
# 8. BZE BRANCH IF MPAC ZERO.
|
|
# 9. BMN BRANCH IF MPAC NEGATIVE NON-ZERO.
|
|
|
|
CCALL INCR LOC # MAINTAIN LOC FOR QPRET COMPUTATION
|
|
INDEX LOC
|
|
# Was CAF --- RSB 2009.
|
|
CA 0 # GET BASE ADDRESS OF CADR LIST.
|
|
INDEX ADDRWD
|
|
AD 0 # ADD INCREMENT.
|
|
TS FBANK # SELECT DESIRED CADR.
|
|
MASK LOW10
|
|
INDEX A
|
|
CAF 10000
|
|
TS POLISH
|
|
|
|
CALL CA BANKSET # FOR ANY OF THE CALL OPTIONS, MAKE UP THE
|
|
MASK BANKMASK # ADDRESS OF THE NEXT OP-CODE PAIR/STORE
|
|
AD BANKMASK # CODE AND LEAVE IT IN QPRET. NOTE THAT
|
|
AD LOC # BANKMASK = -(2000 - 1).
|
|
INDEX FIXLOC
|
|
TS QPRET
|
|
|
|
GOTO CA POLISH # BASIC BRANCHING SEQUENCE.
|
|
+1 MASK HIGH4
|
|
EXTEND
|
|
BZF GOTOERS # SEE IF ADDRESS POINTS TO FIXED OR ERAS.
|
|
+4 CA BANKSET # SET EBANK PART OF BBANK. NEXT, SET UP
|
|
TS BBANK # FBANK. THE COMBINATION IS PICKED UP &
|
|
CA POLISH # PUT INTO BANKSET AT INTPRET +2.
|
|
TS FBANK
|
|
MASK LOW10
|
|
AD 2K
|
|
TS LOC
|
|
TCF INTPRET +3
|
|
|
|
EBANK= 1400 # SO YUL DOESN'T CUSS THE "CA 1400" BELOW.
|
|
|
|
GOTOERS CA POLISH # THE GIVEN ADDRESS IS IN ERASABLE -- SEE
|
|
AD -ENDVAC # IF RELATIVE TO THE WORK ARA.
|
|
CCS A
|
|
CA POLISH # GENERAL ERASABLE.
|
|
TCF GOTOGE
|
|
|
|
# Page 1129
|
|
CA FIXLOC # WORK AREA.
|
|
AD POLISH
|
|
INDEX A # USE THE GIVEN ADDRESS AS THE ADDRESS OF
|
|
CA 0 # THE BRANCH ADDRESS.
|
|
TS POLISH
|
|
TCF GOTO +1 # ALLOWS ARBITRARY INDIRECTNESS LEVELS.
|
|
|
|
GOTOGE TS EBANK
|
|
MASK LOW8
|
|
INDEX A # USE THE GIVEN ADDRESS AS THE ADDRESS OF
|
|
CA 1400 # THE BRANCH ADDRESS.
|
|
TS POLISH
|
|
TCF GOTO +1
|
|
|
|
CGOTO INDEX LOC # COMPUTED GO TO. PICK UP ADDRESS OF CADR
|
|
CA 1 # LIST
|
|
INDEX ADDRWD # ADD MODIFIER.
|
|
AD 0
|
|
TS FBANK # SELECT GOTO ADDRESS
|
|
MASK LOW10
|
|
INDEX A
|
|
CA 10000
|
|
TS POLISH
|
|
TCF GOTO +1 # WITH ADDRESS IN A.
|
|
|
|
SWBRANCH CA BANKSET # SWITCH INSTRUCTIONS WHICH ELECT TO
|
|
TS FBANK # BRANCH COME HERE TO DO SO.
|
|
INDEX LOC
|
|
CA 1
|
|
TS POLISH
|
|
TCF GOTO +1
|
|
|
|
# Page 1130
|
|
# TRIPLE PRECISION BRANCHING ROUTINE. IF CALLING TC IS AT L, RETURN IS AS FOLLOWS:
|
|
# L+1 IF MPAC IS GREATER THAN ZERO.
|
|
# L+2 IF MPAC IS EQUAL TO +0 OR -0.
|
|
# L+3 IF MPAC IS LESS THAN ZERO.
|
|
|
|
BRANCH CCS MPAC
|
|
TC Q
|
|
TCF +2 # ON ZERO.
|
|
TCF NEG
|
|
|
|
CCS MPAC +1
|
|
TC Q
|
|
TCF +2
|
|
TCF NEG
|
|
|
|
CCS MPAC +2
|
|
TC Q
|
|
TCF +2
|
|
TCF NEG
|
|
|
|
Q+1 INDEX Q
|
|
TC 1
|
|
|
|
NEG INDEX Q # IF FIRST NON-ZERO REGISTER WAS NEGATIVE.
|
|
TC 2
|
|
|
|
Q+2 = NEG
|
|
|
|
# ITRACE (3) REFERS TO "EXIT".
|
|
|
|
EXIT CA BANKSET # RESTORE USER'S BANK SETTING, AND LEAVE
|
|
TS BBANK # INTERPRETIVE MODE.
|
|
INDEX LOC
|
|
TC 1
|
|
|
|
# Page 1131
|
|
# SECTION 3 -- ADD/SUBTRACT PACKAGE.
|
|
#
|
|
# THE FOLLOWING OPERATIONS ARE PROVIDED FOR ADDING TO AND SUBTRACTING FROM THE MULTI-PURPOSE ACCUMULATOR
|
|
# MPAC:
|
|
# 1. DAD DOUBLE PRECISION ADD.
|
|
# 2. DSU DOUBLE PRECISION SUBTRACT.
|
|
# 3. BDSU DOUBLE PRECISION SUBTRACT FROM.
|
|
# 4. TAD TRIPLE PRECISION ADD.
|
|
# 5. VAD VECTOR ADD.
|
|
# 6. VSU VECTOR SUBTRACT.
|
|
# 7. BVSU VECTOR SUBTRACT FROM.
|
|
# THE INTERPRETIVE OVERFLOW INDICATOR OVFIND IS SET NON-ZERO IF OVERFLOW OCCURS IN ANY OF THE ABOVE.
|
|
|
|
VSU CAF BIT15 # CHANGES 0 TO DCS.
|
|
TCF +2
|
|
|
|
VAD CAF PRIO30 # CHANGES 0 TO DCA.
|
|
ADS ADDRWD
|
|
EXTEND
|
|
INDEX ADDRWD
|
|
READ HISCALAR # DCA 2 OR DCS 2
|
|
DAS MPAC +3
|
|
EXTEND # CHECK OVERFLOW.
|
|
BZF +2
|
|
TC OVERFLWY
|
|
|
|
EXTEND
|
|
INDEX ADDRWD
|
|
READ CHAN5 # DCA 4 OR DCS 4
|
|
DAS MPAC +5
|
|
EXTEND
|
|
BZF +2
|
|
TC OVERFLWZ
|
|
|
|
EXTEND
|
|
INDEX ADDRWD
|
|
READ LCHAN # DCA 0 OR DCS 0
|
|
TCF ENDVXV
|
|
|
|
DAD EXTEND
|
|
INDEX ADDRWD
|
|
DCA 0
|
|
ENDVXV DAS MPAC # VXV FINISHES HERE.
|
|
EXTEND
|
|
BZF DANZIG
|
|
|
|
# Page 1132
|
|
SETOVF TC OVERFLOW
|
|
TCF DANZIG
|
|
|
|
# Page 1133
|
|
DSU EXTEND
|
|
INDEX ADDRWD
|
|
DCS 0
|
|
TCF ENDVXV
|
|
|
|
OVERFLWZ TS L # ENTRY FOR THIRD COMPONENT.
|
|
CAF FIVE
|
|
TCF +3
|
|
|
|
OVERFLWY TS L # ENTRY FOR SECOND COMPONENT.
|
|
CAF THREE
|
|
XCH L
|
|
|
|
OVERFLOW INDEX A # ENTRY FOR 1ST COMP OR DP (L=0).
|
|
CS LIMITS # PICK UP POSMAX OR NEGMAX.
|
|
TS BUF
|
|
EXTEND
|
|
AUG A
|
|
INDEX L
|
|
ADS MPAC +1
|
|
TS 7
|
|
CAF ZERO
|
|
AD BUF
|
|
INDEX L
|
|
ADS MPAC
|
|
TS 7
|
|
TC Q # NO OVERFLOW EXIT.
|
|
TCF SETOVF2 # SET OVFIND AND EXIT.
|
|
|
|
BVSU EXTEND
|
|
INDEX ADDRWD
|
|
DCA 2
|
|
DXCH MPAC +3
|
|
EXTEND
|
|
DCOM
|
|
DAS MPAC +3
|
|
EXTEND
|
|
BZF +2
|
|
TC OVERFLWY
|
|
|
|
EXTEND
|
|
INDEX ADDRWD
|
|
DCA 4
|
|
DXCH MPAC +5
|
|
EXTEND
|
|
DCOM
|
|
DAS MPAC +5
|
|
EXTEND
|
|
BZF +2
|
|
TC OVERFLWZ
|
|
|
|
# Page 1134
|
|
BDSU EXTEND
|
|
INDEX ADDRWD
|
|
DCA 0
|
|
DXCH MPAC
|
|
EXTEND
|
|
DCOM
|
|
TCF ENDVXV
|
|
|
|
# Page 1135
|
|
# TRIPLE PRECISION ADD ROUTINE.
|
|
|
|
TAD EXTEND
|
|
INDEX ADDRWD
|
|
DCA 1 # ADD MINOR PARTS FIRST.
|
|
DAS MPAC +1
|
|
INDEX ADDRWD
|
|
AD 0
|
|
AD MPAC
|
|
TS MPAC
|
|
TCF DANZIG
|
|
|
|
TCF SETOVF # SET OVFIND IF SUCH OCCURS.
|
|
|
|
# Page 1136
|
|
# ARITHMETIC SUBROUTINES REQUIRED IN FIXED-FIXED.
|
|
# 1. DMPSUB DOUBLE PRECISION MULTIPLY, MULTIPLY THE CONTENTS OF MPAC,+1 BY THE DP WORD WHOSE ADDRESS
|
|
# IS IN ADDRWD AND LEAVE A TRIPLE-PRECISION RESULT IN MPAC.
|
|
# 2. ROUNDSUB ROUND THE TRIPLE PRECISION CONTENTS OF MPAC TO DOUBLE PRECISION.
|
|
# 3. DOTSUB TAKE THE DOT PRODUCT OF THE VECTOR IN MPAC AND THE VECTOR WHOSE ADDRESS IS IN ADDRWD
|
|
# AND LEAVE THE TRIPLE PRECISION RESULT IN MPAC.
|
|
# 4. POLY USING THE CONTENTS OF MPAC AS A DP ARGUMENT, EVALUATE THE POLYNOMIAL WHOSE DEGREE AND
|
|
# COEFFICIENTS IMMEDIATELY FOLLOW THE TC POLY INSTRUCTION (SEE ROUTINE FOR DETAILS).
|
|
|
|
DMP INDEX Q # BASIC SUBROUTINE FOR USE BY PINBALL, ETC
|
|
# Was CAF --- RSB 2009.
|
|
CA 0
|
|
INCR Q
|
|
-1 TS ADDRWD # (PROLOGUE FOR SETTING ADDRWD.)
|
|
|
|
DMPSUB INDEX ADDRWD # GET MINOR PART OF OPERAND AT C(ADDRWD).
|
|
CA 1
|
|
TS MPAC +2 # THIS WORKS FOR SQUARING MPAC AS WELL.
|
|
CAF ZERO # SET MPAC +1 TO ZERO SO WE CAN ACCUMULATE
|
|
XCH MPAC +1 # THE PARTIAL PRODUCTS WITH DAS
|
|
TS MPTEMP # INSTRUCTIONS.
|
|
EXTEND
|
|
MP MPAC +2 # MINOR OF MPAC X MINOR OF C(ADDRWD).
|
|
|
|
XCH MPAC +2 # DISCARD MINOR PART OF ABOVE RESULT AND
|
|
EXTEND # FORM MAJOR OF MPAC X MINOR OF C(ADDRWD).
|
|
MP MPAC
|
|
DAS MPAC +1 # GUARANTEED NO OVERFLOW.
|
|
|
|
INDEX ADDRWD # GET MAJOR PART OF ARGUMENT AT C(ADDRWD).
|
|
CA 0
|
|
XCH MPTEMP # SAVE AND BRING OUT MINOR OF MPAC.
|
|
DMPSUB2 EXTEND
|
|
MP MPTEMP # MAJOR OF C(ADDRWD) X MINOR OF MPAC.
|
|
DAS MPAC +1 # ACCUMULATE, SETTING A TO NET OVERFLOW.
|
|
|
|
XCH MPAC # SETTING MPAC TO 0 OR +-1.
|
|
EXTEND
|
|
MP MPTEMP # MAJOR OF MPAC X MAJOR OF C(ADDRWD).
|
|
DAS MPAC # GUARANTEED NO OVERFLOW.
|
|
TC Q # 49 MCT = .573 MS. INCLUDING RETURN.
|
|
|
|
# Page 1137
|
|
# ROUND MPAC TO DOUBLE PRECISION, SETTING OVFIND ON THE RARE EVENT OF OVERFLOW.
|
|
|
|
ROUNDSUB CAF ZERO # SET MPAC +2 = 0 FOR SCALARS AND CHANGE
|
|
+1 TS MODE # MODE TO DP.
|
|
|
|
VROUND XCH MPAC +2 # BUT WE NEEDN'T TAKE THE TIME FOR VECTORS.
|
|
DOUBLE
|
|
TS L
|
|
TC Q
|
|
|
|
AD MPAC +1 # ADD ROUDING BIT IF MPAC +2 WAS GREATER
|
|
TS MPAC +1 # THAN .5 IN MAGNITUDE.
|
|
TC Q
|
|
|
|
AD MPAC # PROPAGATE INTERFLOW.
|
|
TS MPAC
|
|
TC Q
|
|
|
|
SETOVF2 TS OVFIND # (RARE).
|
|
TC Q
|
|
|
|
# Page 1138
|
|
# THE DOT PRODUCT SUBROUTINE USUALLY FORMS THE DOT PRODUCT OF THE VECTOR IN MPAC WITH A STANDARD SIX
|
|
# REGISTER VECTOR WHOSE ADDRESS IS IN ADDRWD. IN THIS CASE C(DOTINC) ARE SET TO 2. VXM, HOWEVER, SETS C(DOTINC) TO
|
|
# 6 SO THAT DOTSUB DOTS MPAC WITH A COLUMN VECTOR OF THE MATRIX IN QUESTION IN THIS CASE.
|
|
|
|
PREDOT CAF TWO # PROLOGUE TO SET DOTINC TO 2.
|
|
TS DOTINC
|
|
|
|
DOTSUB EXTEND
|
|
QXCH DOTRET # SAVE RETURN
|
|
TC DMPSUB # DOT X COMPONENTS.
|
|
DXCH MPAC +3 # POSITION Y COMPONENT OF MPAC FOR
|
|
DXCH MPAC # MULTIPLICATION WHILE SAVING RESULT IN
|
|
DXCH BUF # THREE WORD BUFFER, BUF.
|
|
CA MPAC +2
|
|
TS BUF +2
|
|
|
|
CA DOTINC # ADVANCE ADDRWD TO Y COMPONENT OF
|
|
ADS ADDRWD # OTHER ARGUMENT.
|
|
TC DMPSUB
|
|
DXCH MPAC +1 # ACCUMULATE PARTIAL PRODUCTS.
|
|
DAS BUF +1
|
|
AD MPAC
|
|
AD BUF
|
|
TS BUF
|
|
TCF +2
|
|
TS OVFIND # IF OVERFLOW OCCURS.
|
|
|
|
DXCH MPAC +5 # MULTIPLY Z COMPONENTS.
|
|
DXCH MPAC
|
|
CA DOTINC
|
|
ADS ADDRWD
|
|
TC DMPSUB
|
|
ENDDOT DXCH BUF +1 # LEAVE FINAL ACCUMULATION IN MPAC.
|
|
DAS MPAC +1
|
|
AD MPAC
|
|
AD BUF
|
|
TS MPAC
|
|
TC DOTRET
|
|
|
|
TC OVERFLOW # ON OVERFLOW HERE.
|
|
TC DOTRET
|
|
|
|
# Page 1139
|
|
# DOUBLE PRECISION POLYNOMIAL EVALUATOR
|
|
# N N-1
|
|
# THIS ROUTINE EVALUATES A X + A X + ... + A X + A LEAVING THE DP RESULT IN MPAC ON EXIT.
|
|
# N N-1 1 0
|
|
#
|
|
# THE ROUTINE HAS TWO ENTRIES
|
|
#
|
|
# 1 ENTRY THRU POWRSERS. THE COEFFICIENTS MAY BE EITHER IN FIXED OR ERASABLE E. THE CALL IS BY
|
|
# TC POWRSERS, AND THE RETURN IS TO LOC(TC POWRSERS)+1. THE ENTERING DATA MUST BE AS FOLLOWS:
|
|
# A SP LOC-3 ADDRESS FOR REFERENCING COEF TABLE
|
|
# L SP N-1 N IS THE DEGREE OF THE POWER SERIES
|
|
# MPAC DP X ARGUMENT
|
|
# LOC-2N DP A(0)
|
|
# ...
|
|
# LOC DP A(N)
|
|
#
|
|
# 2. ENTRY THRU POLY. THE CALL TO POLY AND THE ENTERING DATA MUST BE AS FOLLOWS
|
|
# MPAC DP X ARGUMENT
|
|
# LOC TC POLY
|
|
# LOC+1 DP A(0)
|
|
# ...
|
|
# LOC+2N+2 DP A(N) RETURN IS TO LOC+2N+4
|
|
|
|
POWRSERS EXTEND
|
|
QXCH POLYRET # RETURN ADDRESS
|
|
TS POLISH # POWER SERIES ADDRESS
|
|
LXCH POLYCNT # N-1 TO COUNTER
|
|
TCF POLYCOM # SKIP SET UP BY POLY
|
|
|
|
POLY INDEX Q
|
|
# Was CAF --- RSB 2009.
|
|
CA 0
|
|
TS POLYCNT # N-1 TO COUNTER
|
|
DOUBLE
|
|
AD Q
|
|
TS POLISH # L(A(N))-3 TO POLISH
|
|
AD FIVE
|
|
TS POLYRET # STORE RETURN ADDRESS
|
|
|
|
POLYCOM CAF LVBUF # INCOMING X WILL BE MOVED TO VBUF, SO
|
|
TS ADDRWD # SET ADDRWD SO DMPSUB WILL MPY BY VBUF.
|
|
|
|
EXTEND
|
|
INDEX POLISH
|
|
DCA 3
|
|
|
|
# Page 1140
|
|
DXCH MPAC # LOAD A(N) INTO MPAC
|
|
DXCH VBUF # SAVING X IN VBUF
|
|
TCF POLY2
|
|
|
|
POLYLOOP TS POLYCNT # SAVE DECREMENTED LOOP COUNTER
|
|
CS TWO
|
|
ADS POLISH # REGRESS COEFFICIENT POINTER
|
|
|
|
POLY2 TC DMPSUB # MULTIPLY BY X
|
|
EXTEND
|
|
INDEX POLISH
|
|
DCA 1 # ADD IN NEXT COEFFICIENT
|
|
DAS MPAC # USER'S RESPONSIBILITY TO ASSURE NO OVFLOW
|
|
|
|
CCS POLYCNT
|
|
TCF POLYLOOP
|
|
TC POLYRET # RETURN CALLER
|
|
|
|
# Page 1141
|
|
# MISCELLANEOUS MULTI-PRECISION ROUTINES REQUIRED IN FIXED-FIXED BUT NOT USED BY THE INTERPRETER.
|
|
|
|
DPAGREE CAF ZERO # DOUBLE PRECISION ENTRY --
|
|
TS MPAC +2 # ZERO LOW-ORDER WORD
|
|
|
|
TPAGREE LXCH Q # FORCE SIGN AGREEMENT AMONG THE TRIPLE
|
|
TC BRANCH # PRECISION CONTENTS OF MPAC. RETURNING
|
|
TCF ARG+ # WITH SIGNUM OF THE INPUT IN A.
|
|
TCF ARGZERO
|
|
|
|
CS POSMAX # IF NEGATIVE.
|
|
TCF +2
|
|
|
|
ARG+ CAF POSMAX
|
|
TS Q
|
|
EXTEND
|
|
AUG A # FORMS +-1.0.
|
|
AD MPAC +2
|
|
TS MPAC +2
|
|
CAF ZERO
|
|
AD Q
|
|
AD MPAC +1
|
|
TS MPAC +1
|
|
CAF ZERO
|
|
AD Q # Q STILL HAS POSMAX OR NEGMAX IN IT.
|
|
AD MPAC
|
|
ARGZERO2 TS MPAC # ALWAYS SKIPPING UNLESS ARGZERO.
|
|
TS MPAC +1
|
|
TC L # RETURN VIA L.
|
|
|
|
ARGZERO TS MPAC +2 # SET ALL THREE MPAC REGISTERS TO ZERO.
|
|
TCF ARGZERO2
|
|
|
|
# SHORTMP MULTIPLIES THE TP CONTENTS OF MPAC BY THE SINGLE PRECISION NUMBER ARRIVING IN A.
|
|
|
|
SHORTMP TS MPTEMP
|
|
EXTEND
|
|
MP MPAC +2
|
|
TS MPAC +2
|
|
SHORTMP2 CAF ZERO # SO SUBSEQUENT DAS WILL WORK.
|
|
XCH MPAC +1
|
|
TCF DMPSUB2
|
|
|
|
# Page 1142
|
|
# DMPNSUB MULTIPLIES THE DP FRACTION ARRIVING IN MPAC BY THE SP
|
|
# INTEGER ARRIVING IN A. THE DP PRODUCT DEPARTS BOTH IN MPAC AND IN
|
|
# A AND L. NOTE THAT DMPNSUB NORMALLY INCREASES THE MAGNITUDE OF THE
|
|
# CONTENTS OF MPAC. THE CUSTOMER MUST INSURE THAT B(A) X B(MPAC,MPAC+1)
|
|
# AND B(A) X B(MPAC) ARE LESS THAN 1 IN MAGNITUDE, WHERE B, AS IS OBVIOUS,
|
|
# INDICATES THE ARRIVING CONTENTS.
|
|
|
|
DMPNSUB TS DMPNTEMP
|
|
EXTEND
|
|
MP MPAC +1
|
|
DXCH MPAC # LOW PRODUCT TO MPAC, HIGH FACTOR TO A
|
|
EXTEND
|
|
MP DMPNTEMP
|
|
CA L
|
|
ADS MPAC # COMPLETING THE PRODUCT IN MPAC
|
|
EXTEND
|
|
DCA MPAC # BRINGING THE PRODUCT INTO A AND L
|
|
TC Q
|
|
|
|
# Page 1143
|
|
# MISCELLANEOUS VECTOR OPERATIONS. INCLUDED HERE ARE THE FOLLOWING.
|
|
# 1. DOT DP VECTOR DOT PRODUCT.
|
|
# 2. VXV DP VECTOR CROSS PRODUCT.
|
|
# 3. VXSC DP VECTOR TIMES SCALAR.
|
|
# 4. V/SC DP VECTOR DIVIDED BY SCALAR.
|
|
# 5. VPROJ DP VECTOR PROJECTION. ( (MPAC.X)MPAC ).
|
|
# 6. VXM DP VECTOR POST-MULTIPLIED BY MATRIX.
|
|
# 7. MXV DP VECTOR PRE-MULTIPLIED BY MATRIX.
|
|
|
|
DOT TC PREDOT # DO THE DOT PRODUCT AND EXIT, CHANGING
|
|
DMODE CAF ZERO # THE MODE TO DP SCALAR.
|
|
TCF NEWMODE
|
|
|
|
MXV CAF TWO # SET UP MATINC AND DOTINC FOR ROW
|
|
TS MATINC # VECTORS.
|
|
TCF VXM/MXV # GO TO COMMON PORTION.
|
|
|
|
VXM CS TEN # SET MATINC AND DOTINC TO REFER TO MATRIX
|
|
TS MATINC # AS THREE COLUMN VECTORS.
|
|
CAF SIX
|
|
|
|
# Page 1144
|
|
# COMMON PORTION OF MXV AND VXM.
|
|
|
|
VXM/MXV TS DOTINC
|
|
|
|
# ITRACE (2) REFERS TO "VXM/MXV".
|
|
|
|
TC MPACVBUF # SAVE VECTOR IN MPAC FOR FURTHER USE.
|
|
|
|
TC DOTSUB # GO DOT TO GET X COMPONENT OF ANSWER.
|
|
EXTEND
|
|
DCA VBUF # MOVE MPAC VECTOR BACK INTO MPAC, SAVING
|
|
DXCH MPAC # NEW X COMPONENT IN BUF2.
|
|
DXCH BUF2
|
|
EXTEND
|
|
DCA VBUF +2
|
|
DXCH MPAC +3
|
|
EXTEND
|
|
DCA VBUF +4
|
|
DXCH MPAC +5
|
|
CA MATINC # INITIALIZE ADDRWD FOR NEXT DOT PRODUCT.
|
|
ADS ADDRWD # FORMS HAS ADDRESS OF NEXT COLUMN(ROW).
|
|
|
|
TC DOTSUB
|
|
DXCH VBUF # MORE GIVEN VECTOR BACK TO MPAC, SAVING Y
|
|
DXCH MPAC # COMPONENT OF ANSWER IN VBUF +2.
|
|
DXCH VBUF +2
|
|
DXCH MPAC +3
|
|
DXCH VBUF +4
|
|
DXCH MPAC +5
|
|
CA MATINC # FORM ADDRESS OF LAST COLUMN OR ROW.
|
|
ADS ADDRWD
|
|
|
|
TC DOTSUB
|
|
DXCH BUF2 # ANSWER NOW COMPLETE. PUT COMPONENTS INTO
|
|
DXCH MPAC # PROPER MPAC REGISTERS.
|
|
DXCH MPAC +5
|
|
DXCH VBUF +2
|
|
DXCH MPAC +3
|
|
TCF DANZIG # EXIT.
|
|
|
|
# Page 1145
|
|
# VXSC -- VECTOR TIMES SCALAR.
|
|
|
|
VXSC CCS MODE # TEST PRESENT MODE.
|
|
TCF DVXSC # SEPARATE ROUTINE WHEN SCALAR IS IN MPAC.
|
|
TCF DVXSC
|
|
|
|
VVXSC TC DMPSUB # COMPUTE X COMPONENT
|
|
TC VROUND # AND ROUND IT.
|
|
DXCH MPAC +3 # PUT Y COMPONENT INTO MPAC SAVING MPAC IN
|
|
DXCH MPAC # MPAC +3.
|
|
DXCH MPAC +3
|
|
|
|
TC DMPSUB # DO SAME FOR Y AND Z COMPONENTS.
|
|
TC VROUND
|
|
DXCH MPAC +5
|
|
DXCH MPAC
|
|
DXCH MPAC +5
|
|
|
|
TC DMPSUB
|
|
TC VROUND
|
|
VROTATEX DXCH MPAC # EXIT USED TO RESTORE MPAC AFTER THIS
|
|
DXCH MPAC +5 # TYPE OF ROTATION. CALLED BY VECTOR SHIFT
|
|
DXCH MPAC +3 # RIGHT, V/SC, ETC.
|
|
DXCH MPAC
|
|
TCF DANZIG
|
|
|
|
# Page 1146
|
|
# DP VECTOR PROJECTION ROUTINE.
|
|
|
|
VPROJ TC PREDOT # (MPAC.X)MPAC IS COMPUTED AND LEFT IN
|
|
CS FOUR # MPAC. DO DOT AND FALL INTO DVXSC.
|
|
ADS ADDRWD
|
|
|
|
# VXSC WHEN SCALAR ARRIVES IN MPAC AND VECTOR IS AT X.
|
|
|
|
DVXSC EXTEND # SAVE SCALAR IN MPAC +3 AND GET X
|
|
DCA MPAC # COMPONENT OF ANWER.
|
|
DXCH MPAC +3
|
|
TC DMPSUB
|
|
TC VROUND
|
|
|
|
CAF TWO # ADVANCE ADDRWD TO Y COMPONENT OF X.
|
|
ADS ADDRWD
|
|
EXTEND
|
|
DCA MPAC +3 # PUT SCALAR BACK INTO MPAC AND SAVE
|
|
DXCH MPAC # X RESULT IN MPAC +5.
|
|
DXCH MPAC +5
|
|
TC DMPSUB
|
|
TC VROUND
|
|
|
|
CAF TWO
|
|
ADS ADDRWD # TO Z COMPONENT.
|
|
DXCH MPAC +3 # BRING SCALAR BACK, PUTTING Y RESULT IN
|
|
DXCH MPAC # THE PROPER PLACE.
|
|
DXCH MPAC +3
|
|
TC DMPSUB
|
|
TC VROUND
|
|
|
|
DXCH MPAC # PUT Z COMPONENT IN PROPER PLACE, ALSO
|
|
DXCH MPAC +5 # POSITIONING X.
|
|
DXCH MPAC
|
|
|
|
TCF VMODE # MODE HAS CHANGED TO VECTOR.
|
|
|
|
# Page 1147
|
|
# VECTOR CROSS PRODUCT ROUTINE CALCULATES (X M -X M ,X M -X M ,X M -X M ) WHERE M IS THE VECTOR IN
|
|
# 3 2 2 3 1 3 3 1 2 1 1 2
|
|
# MPAC AND X THE VECTOR AT THE GIVEN ADDRESS.
|
|
|
|
VXV EXTEND
|
|
DCA MPAC +5 # FORM UP M3X1, LEAVING M1 IN VBUF.
|
|
DXCH MPAC
|
|
DXCH VBUF
|
|
TC DMPSUB # BY X1.
|
|
|
|
EXTEND
|
|
DCS MPAC +3 # CALCULATE -X1M2, SAVING X1M3 IN VBUF +2.
|
|
DXCH MPAC
|
|
DXCH VBUF +2
|
|
TC DMPSUB
|
|
|
|
CAF TWO # ADVANCE ADDRWD TO X2.
|
|
ADS ADDRWD
|
|
EXTEND
|
|
DCS MPAC +5 # PREPARE TO GET -X2M3, SAVING -X1M2 IN
|
|
DXCH MPAC # MPAC +5.
|
|
DXCH MPAC +5
|
|
TC DMPSUB
|
|
|
|
EXTEND
|
|
DCA VBUF # GET X2M1, SAVING -X2M3 IN VBUF +4.
|
|
DXCH MPAC
|
|
DXCH VBUF +4
|
|
TC DMPSUB
|
|
|
|
CAF TWO # ADVANCE ADDRWD TO X3.
|
|
ADS ADDRWD
|
|
EXTEND
|
|
DCS VBUF # GET -X3M1, ADDING X2M1 TO MPAC +5 TO
|
|
DXCH MPAC # COMPLETE THE Z COMPONENT OF THE ANSWER.
|
|
DAS MPAC +5
|
|
|
|
EXTEND
|
|
BZF +2
|
|
TC OVERFLWZ
|
|
|
|
TC DMPSUB
|
|
DXCH VBUF +2 # MOVE X1M3 TO MPAC +3 SETTING UP FOR X3M2
|
|
DXCH MPAC +3 # AND ADD -X3M1 TO MPAC +3 TO COMPLETE THE
|
|
DXCH MPAC # Y COMPONENT OF THE RESULT.
|
|
DAS MPAC +3
|
|
|
|
EXTEND
|
|
BZF +2
|
|
# Page 1148
|
|
TC OVERFLWY
|
|
|
|
TC DMPSUB
|
|
DXCH VBUF +4 # GO ADD -X2M3 TO X3M2 TO COMPLETE THE X
|
|
TCF ENDVXV # COMPONENT (TAIL END OF DAD).
|
|
|
|
# THE MPACVBUF SUBROUTINE SAVES THE VECTOR IN MPAC IN VBUF WITHOUT CLOBBERING MPAC.
|
|
|
|
MPACVBUF EXTEND # CALLED BY MXV, VXM, AND UNIT.
|
|
DCA MPAC
|
|
DXCH VBUF
|
|
EXTEND
|
|
DCA MPAC +3
|
|
DXCH VBUF +2
|
|
EXTEND
|
|
DCA MPAC +5
|
|
DXCH VBUF +4
|
|
TC Q # RETURN TO CALLER.
|
|
|
|
# DOUBLE PRECISION SIGN AGREE ROUTINE. ARRIVE WITH INPUT IN A+L. OUTPUT IS IN A + L.
|
|
|
|
ALSIGNAG CCS A # TEST UPPER PART.
|
|
TCF UPPOS # IT IS POSITIVE
|
|
TC Q # ZERO
|
|
TCF UPNEG # NEGATIVE
|
|
TC Q # ZERO
|
|
|
|
UPPOS XCH L # SAVE DECREMENTED UPPER PART.
|
|
AD HALF
|
|
AD HALF
|
|
TS A # SKIPS ON OVERFLOW
|
|
TCF +2
|
|
INCR L # RESTORE UPPER TO ROIGINAL VALUE
|
|
XCH L # SWAP A + L BACK.
|
|
TC Q
|
|
|
|
UPNEG XCH L # SAVE COMPLEMENTED + DECREMENTED UPPER PT
|
|
AD NEGMAX
|
|
AD NEGONE
|
|
TS A
|
|
TCF +2 # DON'T INCREMENT IF NO OVERFLOW.
|
|
INCR L
|
|
XCH L
|
|
COM # MAKE NEGATIVE AGAIN.
|
|
TC Q
|
|
|
|
# Page 1149
|
|
# INTERPRETIVE INSTRUCTIONS WHOSE EXECUTION CONSISTS OF PRINCIPALLY CALLING SUBROUTINES.
|
|
|
|
DMP1 TC DMPSUB # DMP INSTRUCTIONS
|
|
TCF DANZIG
|
|
|
|
DMPR TC DMPSUB
|
|
TC ROUNDSUB +1 # (C(A) = +0).
|
|
TCF DANZIG
|
|
|
|
DDV EXTEND
|
|
INDEX ADDRWD # MOVE DIVIDEND INTO BUF.
|
|
DCA 0
|
|
TCF BDDV +4
|
|
|
|
BDDV EXTEND # MOVE DIVISOR INTO MPAC SAVING MPAC, THE
|
|
INDEX ADDRWD # DIVIDEND, IN BUF.
|
|
DCA 0
|
|
DXCH MPAC
|
|
+4 DXCH BUF
|
|
CAF ZERO # DIVIDE ROUTINES IN BANK 0.
|
|
TS FBANK
|
|
TCF DDV/BDDV
|
|
|
|
SETPD CA ADDRWD # MUST SET TO WORK AREA, OR EBANK TROUBLE.
|
|
TS PUSHLOC
|
|
TCF NOIBNKSW # NO FBANK SWITCH REQUIRED.
|
|
|
|
TSLC CAF ZERO # SHIFTING ROUTINES LOCATED IN BANK 00.
|
|
TS FBANK
|
|
TCF TSLC2
|
|
|
|
GSHIFT CAF LOW7 # USED AS MASK AT GENSHIFT. THIS PROCESSES
|
|
TS FBANK # ANY SHIFT INSTRUCTION (EXCEPT TSLC) WITH
|
|
TCF GENSHIFT # AN ADDRESS (ROUTINES IN BANK 0).
|
|
|
|
# Page 1150
|
|
# THE FOLLOWING IS THE PROLOGUE TO V/SC. IF THE PRESENT MODE IS VECTOR, IT SAVES THE SCALAR AT X IN BUF
|
|
# AND CALLS THE V/SC ROUTINE IN BANK 0. IF THE PRESENT MODE IS SCALAR, IT MOVES THE VECTOR AT X INTO MPAC, SAVING
|
|
# THE SCALAR IN MPAC IN BUF BEFORE CALLING THE V/SC ROUTINE IN BANK 0.
|
|
|
|
V/SC CCS MODE
|
|
TCF DV/SC # MOVE VECTOR INTO MPAC.
|
|
TCF DV/SC
|
|
|
|
VV/SC EXTEND
|
|
INDEX ADDRWD
|
|
DCA 0
|
|
V/SC1 DXCH BUF # IN BOTH CASES, VECTOR IS NOW IN MPAC AND
|
|
CAF ZERO # SCALAR IN BUF.
|
|
TS FBANK
|
|
TCF V/SC2
|
|
|
|
DV/SC EXTEND
|
|
INDEX ADDRWD
|
|
DCA 2
|
|
DXCH MPAC +3
|
|
EXTEND
|
|
INDEX ADDRWD
|
|
DCA 4
|
|
DXCH MPAC +5
|
|
|
|
CS ONE # CHANGE MODE TO VECTOR.
|
|
TS MODE
|
|
|
|
EXTEND
|
|
INDEX ADDRWD
|
|
DCA 0
|
|
DXCH MPAC
|
|
TCF V/SC1
|
|
|
|
# Page 1151
|
|
# SIGN AND COMPLEMENT INSTRUCTIONS.
|
|
|
|
SIGN INDEX ADDRWD # CALL COMP INSTRUCTION IF WORD AT X IS
|
|
CCS 0 # NEGATIVE NON-ZERO.
|
|
TCF DANZIG
|
|
TCF +2
|
|
TCF COMP # DO THE COMPLEMENT.
|
|
|
|
INDEX ADDRWD
|
|
CCSL CCS 1
|
|
TCF DANZIG
|
|
TCF DANZIG
|
|
TCF COMP
|
|
TCF DANZIG
|
|
COMP EXTEND # COMPLEMENT DP MPAC IN EVERY CASE.
|
|
DCS MPAC
|
|
DXCH MPAC
|
|
|
|
CCS MODE # EITHER COMPLEMENT MPAC +3 OR THE REST OF
|
|
TCF DCOMP # THE VECTOR ACCUMULATOR.
|
|
TCF DCOMP
|
|
|
|
EXTEND # VECTOR COMPLEMENT.
|
|
DCS MPAC +3
|
|
DXCH MPAC +3
|
|
EXTEND
|
|
DCS MPAC +5
|
|
DXCH MPAC +5
|
|
TCF DANZIG
|
|
|
|
DCOMP CS MPAC +2
|
|
TS MPAC +2
|
|
TCF DANZIG
|
|
|
|
# Page 1152
|
|
# THE FOLLOWING SHORT SHIFT CODES REQUIRE NO ADDRESS WORD:
|
|
# 1. SR1 TO SR4 SCALAR SHIFT RIGHT.
|
|
# 2. SR1R TO SR4R SCALAR SHIFT RIGHT AND ROUND.
|
|
# 3. SL1 TO SL4 SCALAR SHIFT LEFT.
|
|
# 4. SL1R TO SL4R SCALAR SHIFT LEFT AND ROUND.
|
|
# 5. VSR1 TO VSR8 VECTOR SHIFT RIGHT (ALWAYS ROUNDS).
|
|
# 6. VSL1 TO VSL8 VECTOR SHIFT LEFT (NEVER ROUNDS).
|
|
# THE FOLLOWING CODES REQUIRE AN ADDRESS WHICH MAY BE INDEXED:*
|
|
# 1. SR SCALAR SHIFT RIGHT.
|
|
# 2. SRR SCALAR SHIFT RIGHT AND ROUND.
|
|
# 3. SL SCALAR SHIFT LEFT.
|
|
# 4. SLR SCALAR SHIFT LEFT AND ROUND.
|
|
# 5. VSR VECTOR SHIFT RIGHT.
|
|
# 6. VSL VECTOR SHIFT LEFT.
|
|
# * IF THE ADDRESS IS INDEXED, AND THE INDEX MODIFICATION RESULTS IN A NEGATIVE SHIFT COUNT, A SHIFT OF THE
|
|
# ABSOLUTE VALUE OF THE COUNT IS DONE IN THE OPPOSITE DIRECTION.
|
|
|
|
BANK 00
|
|
|
|
COUNT 00/INTER
|
|
|
|
SHORTT CAF SIX # SCALAR SHORT SHIFTS COME HERE. THE SHIFT
|
|
MASK CYR # COUNT-1 IS NOW IN BITS 2-3 OF CYR. THE
|
|
TS SR # ROUNDING BIT IS IN BIT1 AT THIS POINT.
|
|
|
|
CCS CYR # SEE IF RIGHT OR LEFT SHIFT DESIRED.
|
|
TCF TSSL # SHIFT LEFT.
|
|
|
|
SRDDV DEC 20 # MPTEMP SETTING FOR SR BEFORE DDV.
|
|
|
|
TSSR INDEX SR # GET SHIFTING BIT.
|
|
CAF BIT14
|
|
TS MPTEMP
|
|
|
|
CCS CYR # SEE IF A ROUND IS DESIRED.
|
|
RIGHTR TC MPACSRND # YES -- SHIFT RIGHT AND ROUND.
|
|
TCF NEWMODE # SET MODE TO DP (C(A) = 0).
|
|
MPACSHR CA MPTEMP # DO A TRIPLE PRECISION SHIFT RIGHT.
|
|
EXTEND
|
|
MP MPAC +2
|
|
+3 TS MPAC +2 # (EXIT FROM SQRT AND ABVAL).
|
|
CA MPTEMP
|
|
EXTEND
|
|
# Page 1153
|
|
MP MPAC # SHIFT MAJOR PART INTO A,L AND PLACE IN
|
|
DXCH MPAC # MPAC,+1.
|
|
CA MPTEMP
|
|
EXTEND
|
|
MP L # ORIGINAL C(MPAC +1).
|
|
DAS MPAC +1 # GUARANTEED NO OVERFLOW.
|
|
TCF DANZIG
|
|
|
|
# MPAC SHIFT RIGHT AND ROUND SUBROUTINES
|
|
|
|
MPACSRND CA MPAC +2 # WE HAVE TO DO ALL THREE MULTIPLIES SINCE
|
|
EXTEND # MPAC +1 AND MPAC +2 MIGHT HAVE SIGN
|
|
MP MPTEMP # DISAGREEMENT WITH A SHIFT RIGHT OF L.
|
|
XCH MPAC +1
|
|
EXTEND
|
|
MP MPTEMP
|
|
XCH MPAC +1 # TRIAL MINOR PART.
|
|
AD L
|
|
|
|
VSHR2 DOUBLE # (FINISH VECTOR COMPONENT SHIFT RIGHT
|
|
TS MPAC +2 # AND ROUND.)
|
|
TCF +2
|
|
ADS MPAC +1 # GUARANTEED NO OVERFLOW.
|
|
|
|
CAF ZERO
|
|
TS MPAC +2
|
|
XCH MPAC # SETTING TO ZERO SO FOLLOWING DAS WORKS.
|
|
EXTEND
|
|
MP MPTEMP
|
|
DAS MPAC # AGAIN NO OVERFLOW.
|
|
TC Q
|
|
|
|
VSHRRND CA MPTEMP # ENTRY TO SHIFT RIGHT AND ROUND MPAC WHEN
|
|
EXTEND # MPAC CONTAINS A VECTOR COMPONENT.
|
|
MP MPAC +1
|
|
TS MPAC +1
|
|
XCH L
|
|
TCF VSHR2 # GO ADD ONE IF NECESSARY AND FINISH.
|
|
|
|
# Page 1154
|
|
# ROUTINE FOR SHORT SCALAR SHIFT LEFT (AND MAYBE ROUND).
|
|
|
|
TSSL CA SR # GET SHIFT COUNT FOR SR.
|
|
+1 TS MPTEMP
|
|
|
|
+2 EXTEND # ENTRY HERE FROM SL FOR SCALARS.
|
|
DCA MPAC +1 # SHIFTING LEFT ONE PLACE AT A TIME IS
|
|
DAS MPAC +1 # FASTER THAN DOING THE WHOLE SHIFT WITH
|
|
AD MPAC # MULTIPLIES ASSUMING THAT FREQUENCY OF
|
|
AD MPAC # SHIFT COUNTS GOES DOWN RAPIDLY AS A
|
|
TS MPAC # FUNCTION OF THEIR MAGNITUDE.
|
|
TCF +2
|
|
TS OVFIND # OVERFLOW. (LEAVES OVERFLOW-CORRECTED
|
|
# RESULT ANYWAY).
|
|
CCS MPTEMP # LOOP ON DECREMENTED SHIFT COUNT.
|
|
TCF TSSL +1
|
|
|
|
CCS CYR # SEE IF ROUND WANTED.
|
|
ROUND TC ROUNDSUB # YES -- ROUND AND EXIT.
|
|
TCF DANZIG # SL LEAVES A ZERO IN CYR FOR NO ROUND.
|
|
TCF DANZIG # NO -- EXIT IMMEDIATELY
|
|
|
|
# Page 1155
|
|
# VECTOR SHIFTING ROUTINES.
|
|
|
|
SHORTV CAF LOW3 # SAVE 3 BIT SHIFT COUNT -- 1 WITHOUT
|
|
MASK CYR # EDITING CYR.
|
|
TS MPTEMP
|
|
CCS CYR # SEE IF LEFT OR RIGHT SHIFT.
|
|
TCF VSSL # VECTOR SHIFT LEFT.
|
|
OCT176 OCT 176 # USED IN PROCESSED SHIFTS WITH - COUNT.
|
|
|
|
VSSR INDEX MPTEMP # (ENTRY FROM SR). PICK UP SHIFTING BIT.
|
|
CAF BIT14 # MPTEMP CONTAINS THE SHIFT COUNT - 1.
|
|
TS MPTEMP
|
|
TC VSHRRND # SHIFT X COMPONENT.
|
|
|
|
DXCH MPAC # SWAP X AND Y COMPONENTS.
|
|
DXCH MPAC +3
|
|
DXCH MPAC
|
|
TC VSHRRND # SHIFT Y COMPONENT.
|
|
|
|
DXCH MPAC # SWAP Y AND Z COMPONENTS.
|
|
DXCH MPAC +5
|
|
DXCH MPAC
|
|
TC VSHRRND # SHIFT Z COMPONENT.
|
|
|
|
TCF VROTATEX # RESTORE COMPONENTS TO PROPER PLACES.
|
|
|
|
# Page 1156
|
|
# VECTOR SHIFT LEFT -- DONE ONE PLACE AT A TIME.
|
|
|
|
-1 TS MPTEMP # SHIFTING LOOP.
|
|
|
|
VSSL EXTEND
|
|
DCA MPAC
|
|
DAS MPAC
|
|
EXTEND
|
|
BZF +2
|
|
TC OVERFLOW
|
|
|
|
EXTEND
|
|
DCA MPAC +3
|
|
DAS MPAC +3
|
|
EXTEND
|
|
BZF +2
|
|
TC OVERFLWY
|
|
|
|
EXTEND
|
|
DCA MPAC +5
|
|
DAS MPAC +5
|
|
EXTEND
|
|
BZF +2
|
|
TC OVERFLWZ
|
|
|
|
CCS MPTEMP # LOOP ON DECREMENTED SHIFT COUNTER.
|
|
TCF VSSL -1
|
|
TCF DANZIG # EXIT.
|
|
|
|
# Page 1157
|
|
# TSLC -- TRIPLE SHIFT LEFT AND COUNT. SHIFTS MPAC LEFT UNTIL GREATER THAN .5 IN MAGNITUDE, LEAVING
|
|
# THE COMPLEMENT OF THE NUMBER OF SHIFTS REQUIRED IN X.
|
|
|
|
TSLC2 TS MPTEMP # START BY ZEROING SHIFT COUNT (IN A NOW).
|
|
TC BRANCH # EXIT WITH NO SHIFTING IF ARGUMENT ZERO.
|
|
TCF +2
|
|
TCF ENDTSLC # STORES ZERO SHIFT COUNT IN THIS CASE.
|
|
|
|
TC TPAGREE # MAY CAUSE UPSHIFT OF ONE EXTRA PLACE.
|
|
|
|
CA MPAC # BEGIN NORMALIZATION LOOP.
|
|
TCF TSLCTEST
|
|
|
|
TSLCLOOP INCR MPTEMP # INCREMENT SHIFT COUNTER.
|
|
EXTEND
|
|
DCA MPAC +1
|
|
DAS MPAC +1
|
|
AD MPAC
|
|
ADS MPAC
|
|
TSLCTEST DOUBLE # SEE IF (ANOTHER) SHIFT IS REQUIRED
|
|
OVSK
|
|
TCF TSLCLOOP # YES -- INCREMENT COUNT AND SHIFT AGAIN.
|
|
|
|
ENDTSLC CS MPTEMP
|
|
TCF STORE1 # STORE SHIFT COUNT AND RETURN TO DANZIG.
|
|
|
|
# Page 1158
|
|
# THE FOLLOWING ROUTINE PROCESSES THE GENERAL SHIFT INSTRUCTIONS SR, SRR, SL, AND SLR.
|
|
# THE GIVEN ADDRESS IS DECODED AS FOLLOWS:
|
|
# BITS 1-7 SHIFT COUNT (SUBADDRESS) LESS THAN 125 DECIMAL.
|
|
# BIT 8 PSEUDO SIGN BIT (DETECTS CHANGE IN SIGN IN INDEXED SHIFTS).
|
|
# BIT 9 0 FOR LEFT SHIFT, AND 1 FOR RIGHT SHIFT.
|
|
# BIT 10 1 FOR TERMINAL ROUND ON SCALAR SHIFTS, 0 OTHERWISE
|
|
# BITS 11-13 0.
|
|
# BIT 14 1.
|
|
# BIT 15 0.
|
|
# THE ABOVE ENCODING IS DONE BY THE YUL SYSTEM.
|
|
|
|
GENSHIFT MASK ADDRWD # GET SHIFT COUNT, TESTING FOR ZERO.
|
|
CCS A # (ARRIVES WITH C(A) = LOW7).
|
|
TCF GENSHFT2 # IF NON-ZERO, PROCEED WITH DECREMENTED CT
|
|
|
|
CAF BIT10 # ZERO SHIFT COUNT. NO SHIFTS NEEDED BUT
|
|
MASK ADDRWD # WE MIGHT HAVE TO ROUND MPAC ON SLR AND
|
|
CCS A # SRR (SCALAR ONLY).
|
|
TC ROUNDSUB
|
|
TCF DANZIG
|
|
|
|
GENSHFT2 TS MPTEMP # DECREMENTED SHIFT COUNT TO MPTEMP.
|
|
CAF BIT8 # TEST MEANING OF LOW SEVEN BIT COUNT IN
|
|
EXTEND # MPTEMP NOW.
|
|
MP ADDRWD
|
|
MASK LOW2 # JUMPS ON SHIFT DIRECTION (BIT8) AND
|
|
INDEX A
|
|
TCF +1 # ORIGINAL SHIFT DIRECTION (BIT 9)
|
|
TCF RIGHT- # NEGATIVE SHIFT COUNT FOR SL OR SLR.
|
|
TCF LEFT # SL OR SLR.
|
|
TCF LEFT- # NEGATIVE SHIFT COUNT WITH SR OR SRR.
|
|
|
|
# Page 1159
|
|
# GENERAL SHIFT RIGHT
|
|
|
|
RIGHT CCS MODE # SET IF VECTOR OR SCALAR.
|
|
TCF GENSCR
|
|
TCF GENSCR
|
|
|
|
CA MPTEMP # SEE IF SHIFT COUNT LESS THAN 14D.
|
|
VRIGHT2 AD NEG12
|
|
EXTEND
|
|
BZMF VSSR # IF SO, BRANCH AND SHIFT IMMEDIATELY.
|
|
|
|
AD NEGONE # IF NOT, REDUCE MPTEMP BY A TOTAL OF 14.
|
|
TS MPTEMP # AND DO A SHIFT RIGHT AND ROUND BY 14.
|
|
CAF ZERO # THE ROUND AT THIS STAGE MAY INTRODUCE A
|
|
TS L # ONE BIT ERROR IN A SHIFT RIGHT 15D.
|
|
XCH MPAC
|
|
XCH MPAC +1
|
|
TC SETROUND # X COMPONENT NOW SHIFTED, SO MAKE UP THE
|
|
DAS MPAC # ROUNDING QUANTITY (0 IN A AND 0 OR +-1
|
|
# IN L).
|
|
XCH MPAC +3 # REPEAT THE ABOVE PROCESS FOR Y AND Z/
|
|
XCH MPAC +4
|
|
TC SETROUND
|
|
DAS MPAC +3 # NO OVERFLOW ON THESE ADDS.
|
|
|
|
XCH MPAC +5
|
|
XCH MPAC +6
|
|
TC SETROUND
|
|
DAS MPAC +5
|
|
|
|
CCS MPTEMP # SEE IF DONE, DOING FINAL DECREMENT.
|
|
TS MPTEMP
|
|
TCF VRIGHT2
|
|
BIASLO DEC .2974 B-1 # SQRT CONSTANT
|
|
|
|
TCF DANZIG
|
|
|
|
SETROUND DOUBLE # MAKES UP ROUNDING QUANTITY FROM ARRIVING
|
|
TS MPAC +2 # C(A). L IS ZERO INITIALLY.
|
|
CAF ZERO
|
|
XCH L
|
|
TC Q # RETURN AND DO THE DAS, RESETTING L TO 0.
|
|
|
|
# Page 1160
|
|
# PROCESS SR AND SRR FOR SCALARS.
|
|
|
|
GENSCR CA MPTEMP # SEE IF THE ORIGINAL SHIFT COUNT WAS LESS
|
|
+1 AD NEG12 # THAN 14D.
|
|
EXTEND
|
|
BZMF DOSSHFT # DO THE SHIFT IMMEDIATELY IF SO.
|
|
|
|
+4 AD NEGONE # IF NOT, DECREMENT SHIFT COUNT BY 14D AND
|
|
TS MPTEMP # SHIFT MPAC RIGHT 14 PLACES.
|
|
CAF ZERO
|
|
XCH MPAC
|
|
XCH MPAC +1
|
|
TS MPAC +2
|
|
CCS MPTEMP # SEE IF FINISHED, DO FINAL DECREMENT.
|
|
TS MPTEMP
|
|
TC GENSCR +1
|
|
SLOPEHI DEC .5884 # SQRT CONSTANT.
|
|
CAF BIT10 # FINISHED WITH SHIFT. SEE IF ROUND
|
|
MASK ADDRWD # WANTED.
|
|
CCS A
|
|
TC ROUNDSUB
|
|
TCF DANZIG # DO SO AND/OR EXIT.
|
|
|
|
DOSSHFT INDEX MPTEMP # PICK UP SHIFTING BIT.
|
|
CAF BIT14
|
|
TS MPTEMP
|
|
CAF BIT10 # SEE IF TERMINAL ROUND DESIRED.
|
|
MASK ADDRWD
|
|
CCS A
|
|
TCF RIGHTR # YES.
|
|
TCF MPACSHR # JUST SHIFT RIGHT.
|
|
|
|
# Page 1161
|
|
# PROCESS THE RIGHT- (SL(R) WITH A NEGATIVE COUNT), LEFT-, AND LEFT OPTIONS.
|
|
|
|
RIGHT- CS MPTEMP # GET ABSOLUTE VALUE - 1 OF SHIFT COUNT
|
|
AD OCT176 # UNDERSTANDING THAT BIT8 (PSEUDO-SIGN)
|
|
TS MPTEMP # WAS 1 INITIALLY.
|
|
TCF RIGHT # DO NORMAL SHIFT RIGHT.
|
|
|
|
LEFT- CS OCT176 # SAME PROLOGUE TO LEFT FOR INDEXED RIGHT
|
|
AD MPTEMP # SHIFT WHOSE NET SHIFT COUNT IS NEGATIVE
|
|
COM
|
|
TS MPTEMP
|
|
|
|
LEFT CCS MODE # SINCE LEFT SHIFTING IS DONE ONE PLACE AT
|
|
TCF GENSCL # A TIME, NO COMPARISON WITH 14 NEED BE
|
|
TCF GENSCL # DONE. FOR SCALARS, SEE IF TERMINAL ROUND
|
|
TCF VSSL # DESIRED. FOR VECTORS, SHIFT IMMEDIATELY.
|
|
|
|
GENSCL CS ADDRWD # PUT ROUNDING BIT (BIT 10 OF ADDRWD) INTO
|
|
EXTEND # BIT 15 OF CYR WHERE THE ROUNDING BIT OF
|
|
MP BIT6 # A SHORT SHIFT LEFT WOULD BE
|
|
TS CYR
|
|
TCF TSSL +2 # DO THE SHIFT.
|
|
|
|
# Page 1162
|
|
# SCALAR DIVISION INSTRUCTIONS, DDV AND BDDV, ARE EXECUTED HERE. AT THIS POINT, THE DIVIDEND IS IN MPAC
|
|
# AND THE DIVISOR IS IN BUF.
|
|
|
|
DDV/BDDV CS ONE # INITIALIZATION
|
|
TS DVSIGN # +-1 FOR POSITIVE QUOTIENT -- -0 FOR NEG.
|
|
TS DVNORMCT # DIVIDEND NORMALIZATION COUNT.
|
|
TS MAXDVSW # NEAR-ONE DIVIDE FLAG.
|
|
|
|
CCS BUF # FORCE BUF POSITIVE WITH THE MAJOR PART
|
|
TCF BUFPOS # NON-ZERO.
|
|
TCF +2
|
|
TCF BUFNEG
|
|
|
|
BUFZERO TS MPAC +2 # ZERO THIS.
|
|
TC TPAGREE # FORCE SIGN AGREEMENT BEFORE OVERFLOW
|
|
|
|
CCS MPAC # TEST TO SEE IF MPAC NON-ZERO. (TOO BIG)
|
|
TCF OVF+ # MAJOR PART OF DIVIDEND IS POSITIVE NON-0
|
|
TCF +2
|
|
TCF OVF+ -1 # MAJOR PART OF DIVIDEND IS NEG. NON-ZERO
|
|
|
|
XCH BUF +1 # SHIFT DIVIDEND AND DIVISOR LEFT 14
|
|
XCH BUF
|
|
XCH MPAC +1
|
|
XCH MPAC
|
|
CCS BUF # TRY AGAIN ON FORMER MINOR PART.
|
|
TCF BUF+
|
|
TCF +2 # OVERFLOW ON ZERO DIVISOR.
|
|
TCF BUF-
|
|
|
|
CS MPAC # SIGN OF MPAC DETERMINES SIGN OF RESULT.
|
|
SGNDVOVF EXTEND
|
|
BZMF +2
|
|
INCR DVSIGN # NEGMAX IN MPAC PERHAPS.
|
|
DVOVF CAF POSMAX # ON DIVISION OVERFLOW OF ANY SORT, SET
|
|
TS MPAC # SET DP MPAC TO +-POSMAX.
|
|
TC FINALDV +3
|
|
CAF ONE # SET OVERFLOW INDICATOR AND EXIT.
|
|
TS OVFIND
|
|
TC DANZIG
|
|
|
|
-1 INCR DVSIGN
|
|
OVF+ CS BUF +1 # LOAD LOWER ORDER PART OF DIVISOR.
|
|
TCF SGNDVOVF # GET SIGN OF RESULT.
|
|
|
|
BUF- EXTEND # IF BUF IS NEGATIVE, COMPLEMENT IT AND
|
|
DCS BUF # MAINTAIN DVSIGN FOR FINAL QUOTIENT SIGN.
|
|
DXCH BUF
|
|
INCR DVSIGN # NOW -0.
|
|
|
|
# Page 1163
|
|
BUF+ CCS MPAC # FORCE MPAC POSITIVE, CHECKING FOR ZERO
|
|
TCF MPAC+ # DIVIDEND IN THE PROCESS.
|
|
TCF +2
|
|
TCF MPAC-
|
|
CCS MPAC +1
|
|
TCF MPAC+
|
|
TCF DANZIG # EXIT IMMEDIATELY ON ZERO DIVIDEND.
|
|
TCF MPAC-
|
|
TCF DANZIG
|
|
|
|
MPAC- EXTEND # FORCE MPAC POSITIVE AS BUF IN BUF-.
|
|
DCS MPAC
|
|
DXCH MPAC
|
|
INCR DVSIGN # NOW +1 OR -0.
|
|
|
|
# Page 1164
|
|
MPAC+ CS MPAC # CHECK FOR DIVISION OVERFLOW. IF THE
|
|
AD NEGONE # MAJOR PART OF THE DIVIDEND IS LESS THAN
|
|
AD BUF # THE MAJOR PART OF THE DIVISOR BY AT
|
|
CCS A # LEAST TWO, WE CAN PROCEED IMMEDIATELY
|
|
TCF DVNORM # WITHOUT NORMALIZATION PRODUCING A DVMAX.
|
|
-1/2+2 OCT 60001 # USED IN SQRTSUB.
|
|
|
|
TCF +1 # IF THE ABOVE DOES NOT HOLD, FORCE SIGN
|
|
CAF HALF # AGREEMENT IN NUMERATOR AND DENOMINATOR
|
|
DOUBLE # TO FACILITATE OVERFLOW AND NEAR-ONE
|
|
AD MPAC +1 # CHECKING.
|
|
TS MPAC +1
|
|
CAF ZERO
|
|
AD POSMAX
|
|
ADS MPAC
|
|
|
|
CAF HALF # SAME FOR BUF.
|
|
DOUBLE
|
|
AD BUF +1
|
|
TS BUF +1
|
|
CAF ZERO
|
|
AD POSMAX
|
|
ADS BUF
|
|
|
|
CS MPAC # CHECK MAGNITUDE OF SIGN-CORRECTED
|
|
AD BUF # OPERANDS.
|
|
CCS A
|
|
TCF DVNORM # DIVIDE OK -- WILL NOT BECOME MAXOV CASE.
|
|
LBUF2 ADRES BUF2
|
|
TCF DVOVF # DIVISOR NOT LESS THAN DIVIDEND -- OVF.
|
|
|
|
TS MAXDVSW # IF THE MAJOR PARTS OF THE DIVIDEND AND
|
|
CS MPAC +1 # DIVISOR ARE EQUAL, A SPECIAL APPROXIMA-
|
|
AD BUF +1 # TION IS USED (PROVIDED THE DIVISION IS
|
|
EXTEND # POSSIBLE, OF COURSE).
|
|
BZMF DVOVF
|
|
TCF DVNORM # IF NO OVERFLOW.
|
|
|
|
# Page 1165
|
|
BUFNORM EXTEND # ADD -1 TO AUGMENT SHIFT COUNT AND SHIFT
|
|
AUG DVNORMCT # LEFT ONE PLACE.
|
|
EXTEND
|
|
DCA BUF
|
|
DAS BUF
|
|
|
|
DVNORM CA BUF # SEE IF DIVISOR NORMALIZED YET.
|
|
DOUBLE
|
|
OVSK
|
|
TCF BUFNORM # NO -- SHIFT LEFT ONE AND TRY AGAIN.
|
|
|
|
DXCH MPAC # CALL DIVIDEND NORMALIZATION SEQUENCE
|
|
INDEX DVNORMCT # PRIOR TO DOING THE DIVIDE.
|
|
TC MAXTEST
|
|
|
|
TS MPAC +2 # RETURNS WITH DIVISION DONE AND C(A) = 0.
|
|
TCF DANZIG
|
|
|
|
BUFPOS CCS A
|
|
TCF BUF+ # TO BUF+ IF BUF IS GREATER THAN +1.
|
|
|
|
CS BUF +1 # IF BUF IS +1, FORCING SIGN AGREEMENT
|
|
EXTEND # MAY CAUSE BUF TO BECOME ZERO.
|
|
BZMF BUF+ # BRANCH IF SIGNS AGREE.
|
|
|
|
CA HALF # SIGNS DISAGREE. FORCE AGREEMENT.
|
|
+6 DOUBLE
|
|
ADS BUF +1
|
|
CA ZERO
|
|
TS BUF
|
|
TCF BUFZERO
|
|
|
|
BUFNEG CCS A
|
|
TCF BUF- # TO BUF- IF BUF IS LESS THAN -1.
|
|
|
|
CA BUF +1 # IF BUF IS -1, FORCING SIGN AGREEMENT
|
|
EXTEND # MAY CAUSE BUF TO BECOME ZERO.
|
|
BZMF BUF- # BRANCH IF SIGNS AGREE.
|
|
|
|
CS HALF # SIGNS DISAGREE. FORCE AGREEMENT.
|
|
TCF BUFPOS +6
|
|
|
|
# Page 1166
|
|
# THE FOLLOWING ARE PROLOGUES TO SHIFT THE DIVIDEND ARRIVING IN A AND L BEFORE THE DIVIDE.
|
|
|
|
-21D LXCH SR # SPECIAL PROLOGUE FOR UNIT WHEN THE
|
|
EXTEND # LENGTH OF THE ARGUMENT WAS NOT LESS THAN
|
|
MP HALF # .5. IN THIS CASE, EACH COMPONENT MUST BE
|
|
XCH L # SHIFTED RIGHT ONE TO PRODUCE A HALF-UNIT
|
|
AD SR # VECTOR.
|
|
XCH L
|
|
TCF GENDDV +1 # WITH DP DIVIDEND IN A,L.
|
|
|
|
DDOUBL # PROLOGUE WHICH NORMALIZES THE DIVIDEND
|
|
DDOUBL # WHEN IT IS KNOWN THAT NO DIVISION
|
|
DDOUBL # OVERFLOW WILL OCCUR.
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DDOUBL
|
|
DXCH MPAC
|
|
|
|
MAXTEST CCS MAXDVSW # 0 IF MAJORS MIGHT BE =, -1 OTHERWISE.
|
|
BIASHI DEC .4192 B-1 # SQRT CONSTANTS.
|
|
|
|
TCF MAXDV # CHECK TO SEE IF THEY ARE NOW EQUAL.
|
|
|
|
# Page 1167
|
|
# THE FOLLOWING IS A GENERAL PURPOSE DOUBLE PRECISION DIVISION ROUTINE. IT DIVIDES MPAC BY BUF AND LEAVES
|
|
# THE RESULT IN MPAC. THE FOLLOWING CONDITIONS MUST BE SATISFIED:
|
|
#
|
|
# 1. THE DIVISOR (BUF) MUST BE POSITIVE AND NOT LESS THAN .5.
|
|
#
|
|
# 2. THE DIVIDEND (MPAC) MUST BE POSITIVE WITH THE MAJOR PART OF MPAC STRICTLY LESS THAN THAT OF BUF
|
|
# (A SPECIAL APPROXIMATION, MAXDV, IS USED WHEN THE MAJOR PARTS ARE EQUAL).
|
|
#
|
|
# UNDERSTANDING THAT A/B = Q + S(R/B) WHERE S = 2(-14) AND Q AND R ARE QUOTIENT AND REMAINDER, RESPEC-
|
|
# TIVELY, THE FOLLOWING APPROXIMATION IS OBTAINED BY MULTIPLYING ABOVE AND BELOW BY C - SD AND NEGLECTING TERMS OF
|
|
# ORDER S-SQUARED (POSSIBLY INTRODUCING ERROR INTO THE LOW TWO BITS OF THE RESULT). SIGN AGREEMENT IS UNNECESSARY.
|
|
#
|
|
# A + SB . (R - CD) A + SB
|
|
# ------ = Q + S(------) WHERE Q AND R ARE QUOTIENT AND REMAINDER OF ------ RESPECTIVELY.
|
|
# C + SD ( C } C
|
|
|
|
GENDDV DXCH MPAC # WE NEED A AND B ONLY FOR FIRST DV.
|
|
+1 EXTEND # (SPECIAL UNIT PROLOGUE ENTERS HERE).
|
|
DV BUF # A NOW CONTAINS Q AND L, R.
|
|
DXCH MPAC
|
|
|
|
CS MPAC # FORM DIVIDEND FOR MINOR PART OF RESULT.
|
|
EXTEND
|
|
MP BUF +1
|
|
AD MPAC +1 # OVERFLOW AT THIS POINT IS POSITIVE SINCE
|
|
OVSK # R IS POSITIVE IN EVERY CASE.
|
|
TCF +5
|
|
|
|
EXTEND # OVERFLOW CAN BE REMOVED BY SUBTRACTING C
|
|
SU BUF # (BUF) ONCE SINCE R IS ALWAYS LESS THAN C
|
|
INCR MPAC # IN THIS CASE. INCR COMPENSATES SUBTRACT.
|
|
TCF +DOWN # (SINCE C(A) IS STILL POSITIVE).
|
|
|
|
+5 EXTEND # C(A) CAN BE MADE LESS THAN C IN MAGNI-
|
|
BZMF -UP # TUDE BY DIMINISHING IT BY C (SINCE C IS
|
|
# NOT LESS THAN .5) UNLESS C(A) = 0.
|
|
|
|
# Page 1168
|
|
+DOWN EXTEND
|
|
SU BUF # IF POSITIVE, REDUCE ONLY IF NECESSARY
|
|
EXTEND # SINCE THE COMPENSATING INCR MIGHT CAUSE
|
|
BZF +3 # OVERFLOW.
|
|
EXTEND # DON'T SUBTRACT UNLESS RESULT IS POSITIVE
|
|
BZMF ENDMAXDV # OR ZERO.
|
|
|
|
+3 INCR MPAC # KEEP SUBTRACT HERE AND COMPENSATE.
|
|
TCF FINALDV
|
|
|
|
-UP EXTEND # IF ZERO, SET MINOR PART OF RESULT TO
|
|
BZF FINALDV +3 # ZERO.
|
|
|
|
EXTEND # IF NEGATIVE, ADD C TO A, SUBTRACTING ONE
|
|
DIM MPAC # TO COMPENSATE. DIM IS OK HERE SINCE THE
|
|
ENDMAXDV AD BUF # MAJOR PART NEVER GOES NEGATIVE.
|
|
|
|
# Page 1169
|
|
FINALDV ZL # DO DV TO OBTAIN MINOR PART OF RESULT.
|
|
EXTEND
|
|
DV BUF
|
|
+3 TS MPAC +1
|
|
|
|
CCS DVSIGN # LEAVE RESULT POSITIVE UNLESS C(DVSIGN).
|
|
TC Q
|
|
TC Q
|
|
TC Q
|
|
|
|
EXTEND
|
|
DCS MPAC
|
|
DXCH MPAC
|
|
CAF ZERO # SO WE ALWAYS RETURN WITH C(A) = 0.
|
|
TC Q
|
|
|
|
# Page 1170
|
|
# IF THE MAJOR PARTS OF THE DIVISOR AND DIVIDEND ARE EQUAL, BUT THE MINOR PARTS ARE SUCH THAT THE
|
|
# DIVIDEND IS STRICTLY LESS THAN THE DIVISOR IN MAGNITUDE, THE FOLLOWING APPROXIMATION IS USED. THE ASSUMPTIONS
|
|
# ARE THE SAME AS THE GENERAL ROUTINE WITH THE ADDITION THAT SIGN AGREEMENT IS NECESSARY (B, C, & D POSITIVE).
|
|
#
|
|
# C + SB . (C + B - D)
|
|
# ------ = 37777 + S(---------)
|
|
# C + SD ( C )
|
|
#
|
|
# THE DIVISION MAY BE PERFORMED IMMEDIATELY SINCE B IS STRICTLY LESS THAN D AND C IS NOT LESS THAN .5.
|
|
|
|
MAXDV CS MPAC # SEE IF MAXDV CASE STILL HOLDS AFTER
|
|
AD BUF # NORMALIZATION.
|
|
EXTEND
|
|
BZF +2
|
|
TCF GENDDV # MPAC NOW LESS THAN BUFF -- DIVIDE AS USUAL.
|
|
|
|
+2 CAF POSMAX # SET MAJOR PART OF RESULT.
|
|
TS MPAC
|
|
|
|
CS BUF +1 # FORM DIVIDEND OF MINOR PART OF RESULT.
|
|
AD MPAC +1
|
|
TCF ENDMAXDV # GO ADD C AND DO DIVIDE, ATTACHING SIGN
|
|
# BEFORE EXITING.
|
|
|
|
# Page 1171
|
|
# VECTOR DIVIDED BY SCALAR, V/SC, IS EXECUTED HERE. THE VECTOR IS NOW IN MPAC WITH SCALAR IN BUF.
|
|
|
|
V/SC2 CS ONE # INITIALIZE DIVIDEND NORMALIZATION COUNT
|
|
TS DVNORMCT # AND DIVISION SIGN REGISTER.
|
|
TS VBUF +5
|
|
|
|
TC VECAGREE # FORCE SIGN AGREEMENT IN VECTOR
|
|
|
|
DXCH BUF
|
|
TC ALSIGNAG # SIGN AGREE BUF
|
|
DXCH BUF
|
|
CCS BUF # FORCE DIVISOR POSITIVE WITH MAJOR PART
|
|
TCF /BUF+ # NON-ZERO (IF POSSIBLE).
|
|
TCF +2
|
|
TCF /BUF-
|
|
|
|
XCH BUF +1 # SHIFT VECTOR AND SCALAR LEFT 14.
|
|
XCH BUF
|
|
XCH MPAC +1
|
|
XCH MPAC
|
|
EXTEND # CHECK FOR OVERFLOW IN EACH CASE.
|
|
BZF +2
|
|
TCF DVOVF
|
|
|
|
XCH MPAC +4
|
|
XCH MPAC +3
|
|
EXTEND
|
|
BZF +2
|
|
TCF DVOVF
|
|
|
|
XCH MPAC +6
|
|
XCH MPAC +5
|
|
EXTEND
|
|
BZF +2
|
|
TCF DVOVF
|
|
|
|
CCS BUF
|
|
TCF /BUF+
|
|
TCF DVOVF # ZERO DIVISOR - OVERFLOW.
|
|
TCF /BUF-
|
|
TCF DVOVF
|
|
|
|
/BUF- EXTEND # ON NEGATIVE, COMPLEMENT BUF AND MAINTAIN
|
|
DCS BUF # DVSIGN IN VBUF +5.
|
|
DXCH BUF
|
|
INCR VBUF +5
|
|
|
|
# Page 1172
|
|
/BUF+ EXTEND
|
|
DCA BUF # LEAVE ABS(ORIG DIVISOR) IN BUF2
|
|
DXCH BUF2 # FOR OVERFLOW TESTING
|
|
TCF /NORM # NORMALIZE DIVISOR IN BUF.
|
|
|
|
/NORM2 EXTEND # IF LESS THAN .5, AUGMENT DVNORMCT AND
|
|
AUG DVNORMCT # DOUBLE DIVISOR.
|
|
EXTEND
|
|
DCA BUF
|
|
DAS BUF
|
|
|
|
/NORM CA BUF # SEE IF DIVISOR NORMALIZED.
|
|
DOUBLE
|
|
OVSK
|
|
TCF /NORM2 # DOUBLE AND TRY AGAIN IF NOT.
|
|
|
|
TC V/SCDV # DO X COMPONENT DIVIDE.
|
|
DXCH MPAC +3 # SUPPLY ARGUMENTS IN USUAL SEQUENCE.
|
|
DXCH MPAC
|
|
DXCH MPAC +3
|
|
|
|
TC V/SCDV # Y COMPONENT.
|
|
DXCH MPAC +5
|
|
DXCH MPAC
|
|
DXCH MPAC +5
|
|
|
|
TC V/SCDV # Z COMPONENT.
|
|
TCF VROTATEX # GO RE-ARRANGE COMPONENTS BEFORE EXIT.
|
|
|
|
# Page 1173
|
|
# SUBROUTINE USED BY V/SC TO DIVIDE VECTOR COMPONENT IN MPAC,+1 BY THE SCALAR GIVEN IN BUF.
|
|
|
|
V/SCDV CA VBUF +5 # REFLECTS SIGN OF SCALAR.
|
|
TS DVSIGN
|
|
|
|
CCS MPAC # FORCE MPAC POSITIVE, EXITING ON ZERO.
|
|
TCF /MPAC+
|
|
TCF +2
|
|
TCF /MPAC-
|
|
|
|
CCS MPAC +1
|
|
TCF /MPAC+
|
|
TC Q
|
|
TCF /MPAC-
|
|
TC Q
|
|
|
|
/MPAC- EXTEND # USUAL COMPLEMENTING AND SETTING OF SIGN.
|
|
DCS MPAC
|
|
DXCH MPAC
|
|
INCR DVSIGN
|
|
|
|
/MPAC+ CS ONE # INITIALIZE NEAR-ONE SWITCH.
|
|
TS MAXDVSW
|
|
|
|
CS MPAC # CHECK POSSIBLE OVERFLOW.
|
|
AD BUF2 # UNNORMALIZED INPUT DIVISOR.
|
|
CCS A
|
|
TCF DDVCALL # NOT NEAR-ONE
|
|
TCF +2 # +0 IS JUST POSSIBLE
|
|
TCF DVOVF # NO HOPE
|
|
TS MAXDVSW # SIGNAL POSSIBLE NEAR-ONE CASE
|
|
CS MPAC +1 # SEE IF DIVISION CAN BE DONE
|
|
AD BUF2 +1
|
|
EXTEND
|
|
BZMF DVOVF
|
|
|
|
DDVCALL DXCH MPAC # CALL PRE-DIVIDE NORMALIZATION.
|
|
INDEX DVNORMCT
|
|
TCF MAXTEST
|
|
|
|
# Page 1174
|
|
SLOPELO DEC .8324
|
|
|
|
VECAGREE XCH Q # SAVE Q IN A
|
|
DXCH MPAC
|
|
TC ALSIGNAG # SIGNAGREE MPAC
|
|
DXCH MPAC
|
|
DXCH MPAC +3
|
|
TC ALSIGNAG # SIGN AGREE MPAC +3
|
|
DXCH MPAC +3
|
|
DXCH MPAC +5
|
|
TC ALSIGNAG # SIGNAGREE MPAC +5
|
|
DXCH MPAC +5
|
|
TC A
|
|
|
|
# Page 1175
|
|
# THE FOLLOWING ROUTINE EXECUTES THE UNIT INSTRUCTION, WHICH TAKES THE UNIT OF THE VECTOR IN MPAC.
|
|
|
|
UNIT TC VECAGREE # FORCE SIGN AGREEMENT IN VECTOR
|
|
TC MPACVBUF # SAVE ARGUMENT IN VBUF
|
|
CAF ZERO # MUST SENSE OVERFLOW IN FOLLOWING DOT.
|
|
XCH OVFIND
|
|
TS TEM1
|
|
TC VSQSUB # DOT MPAC WITH ITSELF.
|
|
CA TEM1
|
|
XCH OVFIND
|
|
EXTEND
|
|
BZF +2
|
|
TCF DVOVF
|
|
EXTEND
|
|
DCA MPAC # LEAVE THE SQUARE OF THE LENGTH OF THE
|
|
INDEX FIXLOC # ARGUMENT IN LVSQUARE.
|
|
DXCH LVSQUARE
|
|
|
|
TC SQRTSUB # GO TAKE THE NORMALIZED SQUARE ROOT.
|
|
|
|
CCS MPAC # CHECK FOR UNIT OVERFLOW.
|
|
TCF +5 # MPAC IS NOT LESS THAN .5 UNLESS
|
|
TS L
|
|
INDEX FIXLOC
|
|
DXCH LV
|
|
TCF DVOVF # INPUT TO SQRTSUB WAS 0.
|
|
|
|
CS FOURTEEN # SEE IF THE INPUT WAS SO SMALL THAT THE
|
|
AD MPTEMP # FIRST TWO REGISTERS OF THE SQUARE WERE 0
|
|
CCS A
|
|
COM # IF SO, SAVE THE NEGATIVE OF THE SHIFT
|
|
TCF SMALL # COUNT -15D.
|
|
|
|
TCF LARGE # (THIS IS USUALLY THE CASE.)
|
|
|
|
CS THIRTEEN # IF THE SHIFT COUNT WAS EXACTLY 14, SET
|
|
TS MPTEMP # THE PRE-DIVIDE NORM COUNT TO -13D.
|
|
|
|
CA MPAC # SHIFT THE LENGTH RIGHT 14 BEFORE STORING
|
|
SMALL2 TS L # (SMALL EXITS TO THIS POINT).
|
|
CAF ZERO
|
|
TCF LARGE2 # GO TO STORE LENGTH AND PROCEED.
|
|
|
|
LARGE CCS MPTEMP # MOST ALL CASES COME HERE.
|
|
TCF LARGE3 # SEE IF NO NORMALIZATION WAS REQUIRED BY
|
|
CS SRDDV # SQRT, AND IF SO, SET UP FOR A SHIFT
|
|
TS MPTEMP # RIGHT 1 BEFORE DIVIDING TO PRODUCE
|
|
EXTEND # THE DESIRED HALF UNIT VECTOR.
|
|
DCA MPAC
|
|
# Page 1176
|
|
TCF LARGE2
|
|
|
|
# Page 1177
|
|
LARGE3 COM # LEAVE NEGATIVE OF SHIFT COUNT-1 FOR
|
|
TS MPTEMP # PREDIVIDE LEFT SHIFT.
|
|
|
|
COM # PICK UP REQUIRED SHIFTING BIT TO UNNORM-
|
|
INDEX A # ALIZE THE SQRT RESULT.
|
|
CAF BIT14
|
|
TS BUF
|
|
EXTEND
|
|
MP MPAC +1
|
|
XCH BUF
|
|
EXTEND # (UNNORMALIZE THE SQRT FOR LV).
|
|
MP MPAC
|
|
XCH L
|
|
AD BUF
|
|
XCH L
|
|
|
|
LARGE2 INDEX FIXLOC
|
|
DXCH LV # LENGTH NOW STORED IN WORK AREA.
|
|
|
|
CS ONE
|
|
TS MAXDVSW # NO MAXDV CASES IN UNIT.
|
|
|
|
DXCH VBUF # PREPARE X COMPONENT FOR DIVIDE, SETTING
|
|
DXCH MPAC # LENGTH OF VECTOR AS DIVISOR IN BUF.
|
|
DXCH BUF
|
|
TC UNITDV
|
|
|
|
DXCH VBUF +2 # DO Y AND Z IN USUAL FASHION SO WE CAN
|
|
DXCH MPAC # EXIT THROUGH VROTATEX.
|
|
DXCH MPAC +3
|
|
TC UNITDV
|
|
|
|
DXCH VBUF +4
|
|
DXCH MPAC
|
|
DXCH MPAC +5
|
|
TC UNITDV
|
|
TCF VROTATEX # AND EXIT.
|
|
|
|
# Page 1178
|
|
# IF THE LENGTH OF THE ARGUMENT VECTOR WAS LESS THAN 2(-28), EACH COMPONENT MUST BE SHIFTED LEFT AT LEAST
|
|
# 14 PLACES BEFORE THE DIVIDE, NOTE THAT IN THIS CASE, THE MAJOR PART OF EACH COMPONENT IS ZERO.
|
|
|
|
SMALL TS MPTEMP # NEGATIVE OF PRE-DIVIDE SHIFT COUNT.
|
|
|
|
CAF ZERO # SHIFT EACH COMPONENT LEFT 14.
|
|
XCH VBUF +1
|
|
XCH VBUF
|
|
XCH VBUF +3
|
|
XCH VBUF +2
|
|
XCH VBUF +5
|
|
XCH VBUF +4
|
|
|
|
CS MPTEMP
|
|
INDEX A
|
|
CAF BIT14
|
|
EXTEND
|
|
MP MPAC
|
|
TCF SMALL2
|
|
|
|
THIRTEEN = OCT15
|
|
FOURTEEN = OCT16
|
|
OCT16 = R1D1
|
|
|
|
# Page 1179
|
|
# THE FOLLOWING ROUTINE SETS UP THE CALL TO THE DIVIDE ROUTINES.
|
|
|
|
UNITDV CCS MPAC # FORCE MPAC POSITIVE IF POSSIBLE, SETTING
|
|
TCF UMPAC+ # DVSIGN ACCORDING TO THE SIGN OF MPAC
|
|
TCF +2 # SINCE THE DIVISOR IS ALWAYS POSITIVE
|
|
TCF UMPAC- # HERE.
|
|
|
|
CCS MPAC +1
|
|
TCF UMPAC+
|
|
TC Q # EXIT IMMEDIATELY ON ZERO.
|
|
TCF UMPAC-
|
|
TC Q
|
|
|
|
UMPAC- CS ZERO # IF NEGATIVE, SET -0 IN DVSIGN FOR FINAL
|
|
TS DVSIGN # COMPLEMENT.
|
|
EXTEND
|
|
DCS MPAC # PICK UP ABSOLUTE VALUE OF ARG AND JUMP.
|
|
INDEX MPTEMP
|
|
TCF MAXTEST -1
|
|
|
|
UMPAC+ TS DVSIGN # SET DVSIGN FOR POSITIVE QUOTIENT.
|
|
DXCH MPAC
|
|
INDEX MPTEMP
|
|
TCF MAXTEST -1
|
|
|
|
# Page 1180
|
|
# MISCELLANEOUS UNARY OPERATIONS.
|
|
|
|
DSQ TC DSQSUB # SQUARE THE DP CONTENTS OF MPAC.
|
|
TCF DANZIG
|
|
|
|
ABVALABS CCS MODE # ABVAL OR ABS INSTRUCTION.
|
|
TCF ABS # DO ABS ON SCALAR.
|
|
TCF ABS
|
|
|
|
ABVAL TC VSQSUB # DOT MPAC WITH ITSELF.
|
|
LXCH MODE # MODE IS NOW DP (L ZERO AFTER DAS).
|
|
|
|
EXTEND # STORE SQUARE OF LENGTH IN WORK AREA.
|
|
DCA MPAC
|
|
INDEX FIXLOC
|
|
DXCH LVSQUARE
|
|
|
|
# Page 1181
|
|
# PROGRAM DESCRIPTION -- SUBROUTINE SQRT
|
|
#
|
|
# FUNCTIONAL DESCRIPTION -- DOUBLE PRECISION SQUARE ROOT ROUTINE
|
|
# THIS PROGRAM TAKES THE SQUARE ROOT OF THE 27 OR 28 MOST SIGNIFICANT BITS IN THE TRIPLE PRECISION SET OF
|
|
# NUMBERS -- MPAC, MPAC+1, AND MPAC+2. THE ROOT IS RETURNED DOUBLE PRECISION IN MPAC AND MPAC+1.
|
|
#
|
|
# WARNING -- THIS SUBROUTINE USES A TRIPLE PRECISION INPUT. THE PROGRAMMER MUST ASSURE THE CONTENTS OF MPAC+2
|
|
# ESPECIALLY IF THE CONTENTS OF MPAC IS SMALL OR ZERO. FOR DETAILS SEE STG MEMO NO.949.
|
|
#
|
|
# CALLING SEQUENCE -- IN INTERPRETIVE MODE, I.E., FOLLOWING `TC INTPRET', `SQRT', NO ADDRESS IS ALLOWED.
|
|
# INPUT SCALING: THE BINARY POINT IS ASSUMED TO THE RIGHT OF BIT 15. THE ANSWER IS RETURNED WITH THE SAME SCALING.
|
|
#
|
|
# SUBROUTINES -- GENSCR, MPACSHR, SQRTSUB, ABORT
|
|
#
|
|
# ABORT EXIT MODE -- ABORTS ON NEGATIVE INPUT -1.2X10E-4 (77775 OCTAL) OR LESS.
|
|
# DISPLAYS ERROR CODE 1302
|
|
# TC ABORT
|
|
# OCT 1302
|
|
#
|
|
# DEBRIS -- LOCATIONS BUF, MPTEMP, ADDRWD ARE USED
|
|
|
|
SQRT TC SQRTSUB # TAKE THE SQUARE ROOT OF MPAC.
|
|
CCS MPTEMP # RETURNED NORMALIZED SQUARE ROOT. SEE IF
|
|
TCF +2 # ANY UN-NORMALIZATION REQUIRED AND EXIT
|
|
TCF DANZIG # IF NOT.
|
|
|
|
AD NEG12 # A RIGHT SHIFT OF MORE THAN 13 COULD BE
|
|
EXTEND # REQUIRED IF INPUT WAS ZERO IN MPAC,+1.
|
|
BZMF SQRTSHFT # GOES HERE IN MOST CASES.
|
|
ZL # IF A LONG SHIFT IS REQUIRED, GO TO
|
|
LXCH ADDRWD # GENERAL RIGHT SHIFT ROUTINES.
|
|
TCF GENSCR +4 # ADDRWD WAS ZERO TO PREVENT ROUND.
|
|
|
|
SQRTSHFT INDEX MPTEMP # SELECT SHIFTING BIT AND EXIT THROUGH
|
|
CAF BIT15 # SHIFT ROUTINES.
|
|
TS MPTEMP
|
|
CAF ZERO # TO ZERO MPAC +2 IN THE PROCESS.
|
|
TCF MPACSHR +3
|
|
|
|
ABS TC BRANCH # TEST SIGN OF MPAC AND COMPLEMENT IF
|
|
TCF DANZIG
|
|
TCF DANZIG
|
|
TCF COMP
|
|
|
|
# Page 1182
|
|
VDEF CS FOUR # VECTOR DEFINE -- ESSENTIALLY TREATS
|
|
ADS PUSHLOC # SCALAR IN MPAC AS X COMPONENT, PUSHES UP
|
|
EXTEND # FOR Y AND THEN AGAIN FOR Z.
|
|
INDEX A
|
|
DCA 2
|
|
DXCH MPAC +3
|
|
EXTEND
|
|
INDEX PUSHLOC
|
|
DCA 0
|
|
DXCH MPAC +5
|
|
TCF VMODE # MODE IS NON VECTOR.
|
|
|
|
VSQ TC VSQSUB # DOT MPAC WITH ITSELF.
|
|
TCF DMODE # MODE IS NOW DP.
|
|
|
|
PUSH EXTEND # PUSH DOWN MPAC LEAVING IT LOADED.
|
|
DCA MPAC
|
|
INDEX PUSHLOC # PUSH DOWN FIRST TWO REGISTERS IN EACH
|
|
DXCH 0
|
|
|
|
INDEX MODE # INCREMENT PUSHDOWN POINTER.
|
|
CAF NO.WDS
|
|
ADS PUSHLOC
|
|
|
|
CCS MODE
|
|
TCF TPUSH # PUSH DOWN MPAC +2.
|
|
TCF DANZIG # DONE FOR DP.
|
|
|
|
EXTEND # ON VECTOR, PUSH DOWN Y AND Z COMPONENTS.
|
|
DCA MPAC +3
|
|
INDEX PUSHLOC
|
|
DXCH 0 -4
|
|
EXTEND
|
|
DCA MPAC +5
|
|
INDEX PUSHLOC
|
|
DXCH 0 -2
|
|
TCF DANZIG
|
|
|
|
TPUSH CA MPAC +2
|
|
TCF ENDTPUSH +2
|
|
|
|
RVQ INDEX FIXLOC # RVQ -- RETURN IVA QPRET.
|
|
CA QPRET
|
|
TS POLISH
|
|
TCF GOTO +4 # (ASSUME QPRET POINTS TO FIXED ONLY.)
|
|
|
|
# Page 1183
|
|
# THE FOLLOWING SUBROUTINES ARE USED IN SQUARING MPAC, IN BOTH THE SCALAR AND VECTOR SENSE. THEY ARE
|
|
# SPECIAL CASES OF DMPSUB AND DOTSUB, PUT IN TO SAVE SOME TIME.
|
|
|
|
DSQSUB CA MPAC +1 # SQUARES THE SCALAR CONTENTS OF MPAC.
|
|
EXTEND
|
|
SQUARE
|
|
TS MPAC +2
|
|
CAF ZERO # FORM 2(CROSS TERM).
|
|
XCH MPAC +1
|
|
EXTEND
|
|
MP MPAC
|
|
DDOUBL # AND MAYBE OVEFLOW.
|
|
DAS MPAC +1 # AND SET A TO NET OVERFLOW.
|
|
XCH MPAC
|
|
EXTEND
|
|
SQUARE
|
|
DAS MPAC
|
|
TC Q
|
|
|
|
VSQSUB EXTEND # DOTS THE VECTOR IN MPAC WITH ITSELF.
|
|
QXCH DOTRET
|
|
TC DSQSUB # SQUARE THE X COMPONENT.
|
|
DXCH MPAC +3
|
|
DXCH MPAC
|
|
DXCH BUF # SO WE CAN END IN DOTSUB.
|
|
CA MPAC +2
|
|
TS BUF +2
|
|
|
|
TC DSQSUB # SQUARE Y COMPONENT.
|
|
DXCH MPAC +1
|
|
DAS BUF +1
|
|
AD MPAC
|
|
AD BUF
|
|
TS BUF
|
|
TCF +2
|
|
TS OVFIND # IF OVERFLOW.
|
|
|
|
DXCH MPAC +5
|
|
DXCH MPAC
|
|
TC DSQSUB # SQUARE Z COMPONENT.
|
|
TCF ENDDOT # END AS IN DOTSUB.
|
|
|
|
# Page 1184
|
|
# DOUBLE PRECISION SQUARE ROOT ROUTINE. TAKE THE SQUARE ROOT OF THE TRIPLE PRECISION (MPAC +2 USED ONLY
|
|
# IN NORMALIZATION) CONTENTS OF MPAC AND LEAVE THE NORMALIZED RESULT IN MPAC (C(MPAC) GREATER THAN OR EQUAL TO
|
|
# .5). THE RIGHT SHIFT COUNT (TC UNNORMALIZE) IS LEFT IN MPTEMP.
|
|
|
|
SQRTSUB CAF ZERO # START BY ZEROING RIGHT SHIFT COUNT.
|
|
TS MPTEMP
|
|
|
|
CCS MPAC # CHECK FOR POSITIVE ARGUMENT, SHIFTING
|
|
TCF SMPAC+ # FIRST SIGNIFICANT MPAC REGISTER INTO
|
|
TCF +2 # MPAC ITSELF.
|
|
TCF SQRTNEG # SEE IF MAG OF ARGUMENT LESS THAN 10(-4).
|
|
|
|
XCH MPAC +2 # MPAC IS ZERO -- SHIFT LEFT 14.
|
|
XCH MPAC +1
|
|
TS MPAC
|
|
CAF SEVEN # AUGMENT RIGHT SHIFT COUNTER.
|
|
TS MPTEMP
|
|
|
|
CCS MPAC # SEE IF MPAC NOW PNZ.
|
|
TCF SMPAC+
|
|
TCF +2
|
|
TCF ZEROANS # NEGATIVE BUT LESS THAN 10(-4) IN MAG.
|
|
|
|
XCH MPAC +1 # XERO -- SHIFT LEFT 14 AGAIN.
|
|
TS MPAC
|
|
CAF SEVEN # AUGMENT RIGHT SHIFT COUNTER.
|
|
ADS MPTEMP
|
|
|
|
CCS MPAC
|
|
TCF SMPAC+
|
|
TC Q # SQRT(0) = 0.
|
|
TCF ZEROANS
|
|
TCF FIXROOT # DO NOT LEAVE SQRTSUB WITH -0 IN MPAC.
|
|
|
|
SQRTNEG CCS A # ARGUMENT IS NEGATIVE, BUT SEE IF SIGN-
|
|
TCF SQRTABRT # CORRECTED ARGUMENT IS LESS THAN 10(-4)
|
|
|
|
CCS MPAC +1 # IN MAGNITUDE. IF SO, CALL ANSWER ZERO.
|
|
ZEROANS CAF ZERO # FORCE ANSWER TO ZERO HERE.
|
|
TCF FIXROOT
|
|
TCF SQRTABRT
|
|
TCF FIXROOT
|
|
|
|
SQRTABRT TC P00DOO
|
|
OCT 1302
|
|
|
|
# Page 1185
|
|
SMPAC+ AD -1/2+2 # SEE IF ARGUMENT GREATER THAN OR EQUAL TO
|
|
EXTEND # .5.
|
|
BZMF SRTEST # IF SO, SEE IF LESS THAN .25.
|
|
|
|
DXCH MPAC # WE WILL TAKE THE SQUARE ROOT OF MPAC/2.
|
|
LXCH SR # SHIFT RIGHT 1 AND GO TO THE SQRT ROUTINE
|
|
EXTEND
|
|
MP HALF
|
|
DXCH MPAC
|
|
XCH SR
|
|
ADS MPAC +1 # GUARANTEED NO OVERFLOW.
|
|
|
|
ARGHI CAF SLOPEHI # ARGUMENT BETWEEN .25 AND .5, GET A
|
|
EXTEND # LINEAR APPROXIMATION FOR THIS RANGE.
|
|
MP MPAC
|
|
AD BIASHI # X0/2 = (MPAC/2)(SLOPHI) + BIASHI/2.
|
|
|
|
+4 TS BUF # X0/2 (ARGLO ENTERS HERE).
|
|
CA MPAC # SINGLE-PRECISION THROUGHOUT.
|
|
ZL
|
|
EXTEND
|
|
DV BUF # (MPAC/2)/(X0/2)
|
|
EXTEND
|
|
MP HALF
|
|
ADS BUF # X1 = X0/2 + .5(MPAX/2)/(X0/2)
|
|
|
|
EXTEND
|
|
MP HALF # FORM UP X1/2.
|
|
DXCH MPAC # SAVE AND BRING OUT ARGUMENT.
|
|
EXTEND # TAKE DP QUOTIENT WITH X1.
|
|
DV BUF
|
|
TS BUF +1 # SAVE MAJOR PART OF QUOTIENT.
|
|
CAF ZERO # FORM MINOR PART OF QUOTIENT USING
|
|
XCH L # (REMAINDER,0).
|
|
EXTEND
|
|
DV BUF
|
|
TS L # IN PREPARATION FOR DAS.
|
|
CA BUF +1
|
|
DAS MPAC # X2 = X1/2 + (MPAC/2)X1
|
|
|
|
EXTEND # OVERFLOWS IF ARG. NEAR POSMAX.
|
|
BZF TCQBNK00
|
|
CAF POSMAX
|
|
FIXROOT TS MPAC
|
|
TS MPAC +1
|
|
TCQBNK00 TC Q # RETURN TO CALLER TO UNNORMALIZE, ETC.
|
|
|
|
# Page 1186
|
|
SRTEST AD QUARTER # ARGUMENT WAS LESS THAN .5, SEE IF LESS
|
|
EXTEND # THAN .25.
|
|
BZMF SQRTNORM # IF SO, BEGIN NORMALIZATION.
|
|
|
|
DXCH MPAC # IF BETWEEN .5 AND .25, SHIFT RIGHT 1 AND
|
|
LXCH SR # START AT ARGLO.
|
|
EXTEND
|
|
MP HALF
|
|
DXCH MPAC
|
|
XCH SR
|
|
ADS MPAC +1 # NO OVERFLOW.
|
|
|
|
ARGLO CAF SLOPELO # (NORMALIZED) ARGUMENT BETWEEN .125 AND
|
|
EXTEND # .25
|
|
MP MPAC
|
|
AD BIASLO
|
|
TCF ARGHI +4 # BEGIN SQUARE ROOT.
|
|
|
|
SQRTNM2 EXTEND # SHIFT LEFT 2 AND INCREMENT RIGHT SHIFT
|
|
DCA MPAC +1 # COUNT (FOR TERMINAL UNNORMALIZATION).
|
|
DAS MPAC +1
|
|
AD MPAC
|
|
ADS MPAC # (NO OVERFLOW).
|
|
|
|
SQRTNORM INCR MPTEMP # FIRST TIME THROUGH, JUST SHIFT LEFT 1
|
|
EXTEND # (PUTS IN EFFECTIVE RIGHT SHIFT SINCE
|
|
DCA MPAC +1 # WE WANT MPAC/2).
|
|
DAS MPAC +1
|
|
AD MPAC
|
|
ADS MPAC # (AGAIN NO OVERFLOW).
|
|
DOUBLE
|
|
TS CYL
|
|
|
|
NORMTEST CCS CYL # SEE IF ARGUMENT NOW NORMALIZED AT
|
|
CCS CYL # GREATER THAN .125.
|
|
TCF SQRTNM2 # NO -- SHIFT LEFT 2 MORE AND TRY AGAIN.
|
|
TCF ARGHI # YES -- NOW BETWEEN .5 AND .25.
|
|
TCF ARGLO # ARGUMENT NOW BETWEEN .25 AND .125.
|
|
|
|
# Page 1187
|
|
# TRIGONOMETRIC FUNCTION PACKAGE.
|
|
# THE FOLLOWING TRIGONOMETRIC FUNCTIONS ARE AVAILABLE AS INTERPRETIVE OPERATIONS:
|
|
# 1. SIN COMPUTES (1/2)SINE(2 PI MPAC).
|
|
# 2. COS COMPUTES (1/2)COSINE(2 PI MPAC).
|
|
# 3. ASIN COMPUTES (1/2PI)ARCSINE(2 MPAC).
|
|
# 4. ACOS COMPUTES (1/2PI)ARCCOSINE(2 MPAC).
|
|
#
|
|
# SIN-ASIN AND COS-ACOS ARE MUTUALLY INVERSE, I.E., SIN(ASIN(X)) = X.
|
|
|
|
COSINE TC BRANCH # FINDS COSINE USING THE IDENTITY
|
|
TCF +3 # COS(X) = SIN(PI/2 - ABS(X)).
|
|
TCF PRESINE
|
|
TCF PRESINE
|
|
|
|
+3 EXTEND
|
|
DCS MPAC
|
|
DXCH MPAC
|
|
|
|
PRESINE CAF QUARTER # PI/2 SCALED.
|
|
ADS MPAC
|
|
|
|
SINE DXCH MPAC # DOUBLE ARGUMENT.
|
|
DDOUBL
|
|
OVSK # SEE IF OVERFLOW PRESENT.
|
|
TCF +3 # IF NOT, ARGUMENT OK AS IS.
|
|
|
|
EXTEND # IF SO, WE LOST (OR GAINED) PI, SO
|
|
DCOM # COMPLEMENT MPAC USING THE IDENTITY
|
|
# SIN(X-(+)PI) = SIN(-X).
|
|
+3 DXCH MPAC
|
|
CA MPAC # SEE IF ARGUMENT GREATER THAN .5 IN
|
|
DOUBLE # MAGNITUDE. IF SO, REDUCE IT TO LESS THAN
|
|
TS L # .5 (+-PI/2 SCALED) AS FOLLOWS:
|
|
TCF SN1
|
|
|
|
INDEX A # IF POSITIVE, FORM PI - X, IF NEGATIVE
|
|
CAF NEG1/2 +1 # USE -PI -X.
|
|
DOUBLE
|
|
EXTEND
|
|
SU MPAC # GUARANTEED NO OVERFLOW.
|
|
TS MPAC
|
|
CS MPAC +1
|
|
TS MPAC +1
|
|
|
|
# Page 1188
|
|
SN1 EXTEND # SET UP TO EVALUATE HASTINGS POLYNOMIAL
|
|
DCA MPAC
|
|
DXCH BUF2
|
|
TC DSQSUB # SQUARE MPAC.
|
|
|
|
TC POLY # EVALUATE FOURTH ORDER POLYNOMIAL.
|
|
DEC 3
|
|
2DEC +.3926990796
|
|
2DEC -.6459637111
|
|
2DEC +.318758717
|
|
2DEC -.074780249
|
|
2DEC +.009694988
|
|
|
|
CAF LBUF2 # MULTIPLY BY ARGUMENT AND SHIFT LEFT 2.
|
|
TC DMPSUB -1
|
|
|
|
EXTEND
|
|
DCA MPAC +1
|
|
DAS MPAC +1
|
|
AD MPAC
|
|
ADS MPAC # NEITHER SHIFT OVERFLOWS.
|
|
EXTEND
|
|
DCA MPAC +1
|
|
DAS MPAC +1
|
|
AD MPAC
|
|
ADS MPAC
|
|
TCF DANZIG
|
|
|
|
# Page 1189
|
|
# ARCSIN/ARCCOS ROUTINE.
|
|
|
|
ARCSIN CAF LASINEX # COMPUTE ARCSIN BY USING THE IDENTITY
|
|
TCF +2 # ARCSIN(X) = PI/2 - ARCCOS(X).
|
|
|
|
ARCCOS CAF LDANZIG # (EXITS IMMEDIATELY).
|
|
TS ESCAPE
|
|
TC BRANCH # TEST SIGN OF INPUT.
|
|
TCF ACOSST # START IMMEDIATELY IF POSITIVE.
|
|
TCF ACOSZERO # ARCCOS(0) = PI/2 = .25.
|
|
EXTEND # IF NEGATIVE, USE THE IDENTITY
|
|
DCS MPAC # ARCCOS(X) = PI - ARCCOS(-X), FORCING
|
|
DXCH MPAC # ARGUMENT POSITIVE.
|
|
CAF TCSUBTR # SET EXIT TO DO ABOVE BEFROE
|
|
XCH ESCAPE # ARCSIN/ARCCOS CONSIDERATIONS.
|
|
TS ESCAPE2
|
|
|
|
ACOSST CS HALF # TEST MAGNITUDE OF INPUT.
|
|
AD MPAC
|
|
CCS A
|
|
TCF ACOSOVF # THIS IS PROBABLY AN OVERFLOW CASE.
|
|
|
|
LASINEX TCF ASINEX
|
|
|
|
TCF ACOSST2 # NO OVERFLOW -- PROCEED.
|
|
|
|
CCS MPAC +1 # IF MAJOR PART IS .5, CALL ANSWER 0
|
|
CAF ZERO # UNLESS MINOR PART NEGATIVE.
|
|
TCF ACOS=0
|
|
|
|
TCF ACOSST2
|
|
|
|
ACOS=0 TS MPAC +1
|
|
TS MPAC
|
|
TC ESCAPE
|
|
|
|
ACOSST2 EXTEND # NOW THAT ARGUMENT IS IN PROPER RANGE,
|
|
DCS MPAC # BEGIN COMPUTATION. USE HASTINGS
|
|
AD HALF # APPROXIMATION ARCCOS(X) = SQRT(1-X)P(X)
|
|
DXCH MPAC # IN A SCALED VERSION WHERE P(X) IS A
|
|
DXCH BUF2 # SEVENTH ORDER POLYNOMIAL.
|
|
|
|
TC SQRTSUB # RETURNS WITH NORMALIZED SQUARE ROOT.
|
|
|
|
CCS MPTEMP # SEE IF UN-NORMALIZATION REQUIRED.
|
|
TCF ACOSSHR
|
|
|
|
# Page 1190
|
|
ACOS3 DXCH MPAC # SET UP FOR POLYNOMIAL EVALUATION.
|
|
DXCH BUF2
|
|
DXCH MPAC
|
|
|
|
TC POLY
|
|
DEC 6
|
|
2DEC +.353553385 # COEFFICIENTS ARE C 2(+I)/PISQRT(2) WHERE
|
|
2DEC* -.0483017006 B+1* # I
|
|
2DEC* +.0200273085 B+2* # WEHRE C STANDS FOR ORIGINAL COEFFS.
|
|
2DEC* -.0112931863 B+3*
|
|
2DEC* +.00695311612 B+4*
|
|
2DEC* -.00384617957 B+5*
|
|
2DEC* +.001501297736 B+6*
|
|
2DEC* -.000284160334 B+7*
|
|
|
|
CAF LBUF2 # DO FINAL MULTIPLY AND GO TO ANY
|
|
TC DMPSUB -1 # EPILOGUE SEQUENCES.
|
|
TC ESCAPE
|
|
|
|
SUBTR EXTEND # EPILOGUE FOR NEGATIVE INPUTS TO ARCCOS.
|
|
DCS MPAC
|
|
AD HALF # FORMS PI - ARCCOS(-X) = ARCCOS(X).
|
|
DXCH MPAC
|
|
TC ESCAPE2 # GO TO POSSIBLE ARCSIN EPILOGUE.
|
|
|
|
ASINEX EXTEND
|
|
DCS MPAC # ARCSIN EPILOGUE -- GET ARCSIN(X)
|
|
AD QUARTER # = PI/2 - ARCCOS(X).
|
|
DXCH MPAC
|
|
LDANZIG TCF DANZIG
|
|
|
|
# Page 1191
|
|
ACOSSHR INDEX A # THE SHIFT RIGHT IS LESS THAN 14 SINCE
|
|
CAF BIT14 # THE INPUT WAS NON-ZERO DP.
|
|
TS MPTEMP
|
|
TC VSHRRND # DP SHIFT RIGHT AND ROUND.
|
|
TCF ACOS3 # PROCEED.
|
|
|
|
ACOSOVF EXTEND # IF MAJOR PART WAS ONLY 1 MORE THAN .5,
|
|
BZF ACOS=0 # CALL ANSWER ZERO.
|
|
|
|
ACOSABRT TC ALARM # IF OVERFLOW, CALL ANSWER ZERO BUT
|
|
OCT 1301 # SOUND AN ALARM.
|
|
|
|
CAF ZERO
|
|
TCF ACOS=0
|
|
|
|
ACOSZERO CAF QUARTER # ACOS(0) = PI/2.
|
|
TCF ACOS=0 +1 # SET MPAC AND EXIT VIA ESCAPE.
|
|
|
|
NEG12 DEC -12
|
|
TCSUBTR TCF SUBTR
|
|
|
|
# Page 1192
|
|
# THE FOLLOWING INSTRUCTIONS ARE AVAILABLE FOR SETTING, MODIFYING, AND BRANCHING ON INDEX REGISTERS:
|
|
# 1. AXT ADDRESS TO INDEX TRUE.
|
|
# 2. AXC ADDRESS TO INDEX COMPLEMENTED.
|
|
# 3. LXA LOAD INDEX FROM ERASABLE.
|
|
# 4. LXC LOAD INDEX COMPLEMENTED FROM ERASABLE.
|
|
# 5. SXA STORE INDEX IN ERASABLE.
|
|
# 6. XCHX EXCHANGE INDEX REGISTER WITH ERASABLE.
|
|
# 7. INCR INCREMENT INDEX REGISTER.
|
|
# 8. XAD ERASABLE ERASABLE ADD TO INDEX REGISTER.
|
|
# 9. XSU ERASABLE SUBTRACT FROM INDEX REGISTER.
|
|
# 10. TIX BRANCH ON INDEX REGISTER AND DECREMENT.
|
|
|
|
BANK 01
|
|
|
|
COUNT 01/INTER
|
|
|
|
AXT TC TAGSUB # SELECT APPROPRIATE INDEX REGISTER.
|
|
CA POLISH
|
|
XSTORE INDEX INDEXLOC # CONTAINS C(FIXLOC) OR C(FIXLOC)+1
|
|
TS X1
|
|
TCF DANZIG
|
|
|
|
AXC TC TAGSUB
|
|
CS POLISH
|
|
TC XSTORE
|
|
|
|
LXA TC 15ADRERS # LOAD INDEX REGISTER FROM ERASABLE.
|
|
INDEX POLISH
|
|
CA 0
|
|
TCF XSTORE
|
|
|
|
LXC TC 15ADRERS # LOAD NDX REG FROM ERASABLE COMPLEMENTED.
|
|
INDEX POLISH
|
|
CS 0
|
|
TCF XSTORE
|
|
|
|
SXA TC 15ADRERS # STORE INDEX REGISTER IN ERASABLE.
|
|
INDEX INDEXLOC
|
|
CA X1
|
|
MSTORE1 INDEX POLISH
|
|
TS 0
|
|
TCF DANZIG
|
|
|
|
# Page 1193
|
|
XCHX TC 15ADRERS # EXCHANGE INDEX REGISTER WITH ERASABLE.
|
|
INDEX POLISH
|
|
CA 0
|
|
INDEX INDEXLOC
|
|
XCH X1
|
|
TCF MSTORE1
|
|
|
|
XAD TC 15ADRERS # ADD ERASABLE TO INDEX REGISTER.
|
|
INDEX POLISH
|
|
CA 0
|
|
XAD2 INDEX INDEXLOC
|
|
ADS X1 # IGNORING OVERFLOWS.
|
|
TCF DANZIG
|
|
|
|
INCR TC TAGSUB # INCREMENT INDEX REGISTER.
|
|
CA POLISH
|
|
TCF XAD2
|
|
|
|
XSU TC 15ADRERS # SUBTRACT ERASABLE FROM INDEX REGISTER.
|
|
INDEX POLISH
|
|
CS 0
|
|
TCF XAD2
|
|
|
|
TIX TC TAGSUB # BRANCH AND DECREMENT ON INDEX.
|
|
INDEX INDEXLOC
|
|
CS S1
|
|
INDEX INDEXLOC
|
|
AD X1
|
|
EXTEND # NO OPERATION IF DECREMENTED INDEX IS
|
|
BZMF DANZIG # NEGATIVE OR ZERO.
|
|
|
|
DOTIXBR INDEX INDEXLOC
|
|
XCH X1 # IGNORING OVERFLOWS.
|
|
|
|
TCF GOTO # DO THE BRANCH USING THE CADR IN POLISH.
|
|
|
|
# Page 1194
|
|
# SUBROUTINE TO CONVERT AN ERASABLE ADDRESS (11 BITS) TO AN EBANK SETTING AND SUBADDRESS.
|
|
|
|
15ADRERS CS POLISH
|
|
AD DEC45
|
|
CCS A # DOES THE ADDRESS POINT TO THE WORK AREA?
|
|
CA FIXLOC # YES. ADD FIXLOC. EBANK OK AS IS.
|
|
TCF +5
|
|
|
|
CA OCT1400 # NO. SET EBANK & MAKE UP SUBADDRESS.
|
|
XCH POLISH
|
|
TS EBANK
|
|
MASK LOW8
|
|
+5 ADS POLISH # FALL INTO TAGSUB, AND RETURN VIA Q.
|
|
|
|
# SUBROUTINE WHICH SETS THE ADDRESS OF THE SPECIFIED INDEX IN INDEXLOC. (ACTUALLY, THE ADDRESS -38D.)
|
|
|
|
TAGSUB CA FIXLOC
|
|
TS INDEXLOC
|
|
|
|
CCS CYR # BIT 15 SPECIFIES INDEX.
|
|
INCR INDEXLOC # 0 MEANS USE X2.
|
|
TC Q
|
|
TC Q # 1 FOR X1.
|
|
|
|
# Page 1195
|
|
# MISCELLANEOUS OPERATION CODES WITH DIRECT ADDRESSES. INCLUDED HERE ARE:
|
|
# 1. ITA STORE CPRET (RETURN ADDRESS) IN ERASABLE.
|
|
# 2. CALL CALL A SUBROUTINE, LEAVING RETURN IN QPRET.
|
|
# 3. RTB RETURN TO BASIC LANGUAGE AT THE GIVEN ADDRESS.
|
|
# 4. BHIZ BRANCH IF THE HIGHORDER OF MPAC IS ZERO (SINGLE PRECISION).
|
|
# 5. BOV BRANCH ON OVERFLOW.
|
|
# 6. GOTO SIMPLE SEQUENCE CHANGE.
|
|
|
|
RTB/BHIZ CCS CYR
|
|
RTB CA POLISH
|
|
TC SWCALL -1 # SO A "TC Q" FROM ROUTINE LEADS TO DANZIG
|
|
|
|
BHIZ CCS MPAC
|
|
TCF DANZIG
|
|
TCF GOTO
|
|
TCF DANZIG
|
|
TCF GOTO
|
|
|
|
BOV(B) CCS OVFIND # BRANCH ON OVERFLOW TO BASIC OR INTERP.
|
|
TCF +2
|
|
TCF DANZIG
|
|
TS OVFIND
|
|
CCS CYR
|
|
TCF RTB # IF BASIC.
|
|
B5TOBB OCT 360
|
|
TCF GOTO
|
|
|
|
# Page 1196
|
|
BZE/GOTO CCS CYR # SEE WHICH OP-CODE IS DESIRED.
|
|
TC BRANCH # DO BZE.
|
|
TCF DANZIG
|
|
TCF GOTO # DO GOTO.
|
|
TCF DANZIG
|
|
|
|
BPL/BMN CCS CYR
|
|
TCF BPL
|
|
5B10 #DEC 5 B+10 # SHIFTS OP CODE IN SWITCH INSTRUCTION ADR
|
|
DEC 5 B-4 # RSB 2009
|
|
|
|
TC BRANCH # DO BMN
|
|
TCF DANZIG
|
|
TCF DANZIG
|
|
TCF GOTO # ONLY IF NNZ.
|
|
|
|
BPL TC BRANCH
|
|
TCF GOTO # IF POSITIVE OR ZERO.
|
|
TCF GOTO
|
|
TCF DANZIG
|
|
|
|
CALL/ITA CCS CYR
|
|
TCF CALL
|
|
|
|
TC CCSHOLE
|
|
TC 15ADRERS # STORE QPRET. (TAGSUB AFTER 15ADRERS IS
|
|
INDEX FIXLOC # SLOW IN THIS CASE, BUT SAVES STORAGE.)
|
|
CA QPRET
|
|
TCF MSTORE1
|
|
|
|
# Page 1197
|
|
# THE FOLLOWING OPERATIONS ARE AVAILABLE FOR ALTERING AND TESTING INTERPRETATIVE SWITCHES:
|
|
# 00 BONSET SET A SWITCH AND DO A GOTO IF IT WAS ON.
|
|
# 01 SETGO SET A SWITCH AND DO A GOTO.
|
|
# 02 BOFSET SET A SWITCH AND DOA GOTO IF IT WAS OFF
|
|
# 03 SET SET A SWITCH.
|
|
# 04 BONINV INVERT A SWITCH AND BRANCH IF IT WAS ON.
|
|
# 05 INVGO INVERT A SWITCH AND DO A GOTO.
|
|
# 06 BOFINV INVERT A SWITCH AND BRANCH IF IT WAS OFF
|
|
# 07 INVERT INVERT A SWITCH.
|
|
# 10 BONCLR CLEAR A SWITCH AND BRANCH IF IT WAS ON.
|
|
# 11 CLRGO CLEAR A SWITCH AND DO A GOTO.
|
|
# 12 BOFCLR CLEAR A SWITCH AND BRANCH IF IT WAS OFF.
|
|
# 13 CLEAR CLEAR A SWITCH.
|
|
# 14 BON BRANCH IF A SWITCH WAS ON.
|
|
# 16 BOFF BRANCH IF A SWITCH WAS OFF.
|
|
# THE ADDRESS SUPPLIED WITH THE SWITCH INSTRUCTION IS INTERPRETED AS FOLLOWS:
|
|
# BITS 1-4 SWITCH BIT NUMBER (1-15).
|
|
# BITS 5-8 SWITCH OPERATION NUMBER
|
|
# BITS 9- SWITCH WORD NUMBER (UP TO 64 SWITCH WORDS).
|
|
# THE ADDRESS ITSELF IS MADE UP BY THE YUL SYSTEM ASSEMBLER. THE BRANCH INSTRUCTIONS REQUIRE TWO
|
|
# ADDRESSES, THE SECOND TAKEN AS THE DIRECT (OR INDIRECT IF IN ERASABLE) ADDRESS OF THE BRANCH.
|
|
|
|
SWITCHES CAF LOW4 # LEAVE THE SWITCH BIT IN SWBIT.
|
|
MASK POLISH
|
|
INDEX A
|
|
CAF BIT15 # (NUMBER FROM LEFT TO RIGHT.)
|
|
TS SWBIT
|
|
|
|
CAF BIT7 # LEAVE THE SWITCH NUMBER IN SWWORD.
|
|
EXTEND
|
|
MP POLISH
|
|
TS SWWORD
|
|
|
|
INHINT # DURING SWITCH CHANGE SO RUPT CAN USE TOO
|
|
INDEX A # LEAVE THE SWITCH WORD ITSELF IN L.
|
|
CA STATE
|
|
TS Q # Q WILL BE USED AS A CHANNEL.
|
|
# Page 1198
|
|
CAF BIT11
|
|
EXTEND # DISPATCH SWITCH BIT OPERATION AS IN BITS
|
|
MP POLISH # 7-8 OF POLISH.
|
|
MASK B3TOB4 # GETS 4X2-BIT CODE.
|
|
INDEX A
|
|
TCF +1
|
|
|
|
+1 CA SWBIT # 00 -- SET SWITCH IN QUESTION.
|
|
EXTEND
|
|
ROR QCHAN
|
|
TCF SWSTORE
|
|
|
|
+5 CA SWBIT # 01 -- INVERT SWITCH.
|
|
EXTEND
|
|
RXOR QCHAN
|
|
TCF SWSTORE
|
|
|
|
+9D CS SWBIT # 10 -- CLEAR.
|
|
MASK Q
|
|
SWSTORE INDEX SWWORD
|
|
TS STATE # NEW SWITCH WORD.
|
|
|
|
# Page 1199
|
|
+13D RELINT # 11 -- NOOP.
|
|
CAF BIT13
|
|
EXTEND # DISPATCH SEQUENCE CHANGING OR BRANCING
|
|
MP POLISH # CODE.
|
|
MASK B3TOB4
|
|
INDEX A
|
|
TCF +1 # ORIGINALLY STORED IN BITS 5-6
|
|
|
|
+1 CS Q # 00 -- BRANCH IF ON.
|
|
TEST MASK SWBIT
|
|
CCS A
|
|
TCF SWSKIP
|
|
|
|
+5 TCF SWBRANCH # 01 -- GO TO.
|
|
|
|
TCF SWSKIP # HERE ONLY ON BIT 15.
|
|
|
|
TC CCSHOLE
|
|
TC CCSHOLE
|
|
|
|
+9D CA Q # 10 -- BRANCH IF OFF.
|
|
TCF TEST
|
|
|
|
B3TOB4 OCT 0014
|
|
SWSKIP INCR LOC
|
|
|
|
SW/ EQUALS SWITCHES
|
|
|
|
+13D TCF DANZIG # 11 -- NOOP.
|
|
|